this commit removes the webserver block within the box add unit test.
It's not actually needed since the test is just ensuring that if a user
adds a box name as a URL it prints a warning to the user.
Prior to this commit, the virtualbox synced folder option
`SharedFoldersEnableSymlinksCreate` was always enabled. This commit
introduces a config option and an environment variable which allows
users to configure the option globally or per synced_folder in their
Vagrantfile.
As of `net-ssh` version 4.2.0, the key :paranoid has been deprecated in
favor of using :verify_host_key. This commit updates Vagrants ssh config
to use the new key, and deprecates the use of :paranoid.
This provides a simple wrapper around all output to
scrub any strings that have been registered as sensitive
before being output. Also included is a small change
to the initial debug output to only show vagrant specific
environment variables and not the full user environment.
This commit adds some additional handling for when Vagrant loads config
files. Instead of showing the basic ruby exception, it prints a more
helpful error message and tries to direct the user to the line number
and file where the exception is occuring.
Provides simple nfs service name detection via systemd or sys-v. Defaults
are provided if no match is found. Service name is defined via method
allowing derivative guests to only need to provide an updated name.
This bug (invalid method call) hasn't been caught by unit tests because
Vagrant::Plugin::V2::Config catches all invalid/bad configuration calls
and save them for generating error messages during the "validate" stage.
This way, the `ask_sudo_pass=(value)` method was not interrupted and the
`@ask_become_pass` attribute was (surprisingly) correctly set (allowing
the related unit tests to pass).
In order to avoid similar problem to happen again, the deprecation
message output is now fully verified.
This commit removes some duplicated code within the Solaris11 guest
implemnentation and instead relies on the Solaris guest for the majority
of its guest capabilities.
It should be valid to allow paths with spaces for the synced folder
guest path but since the guest path is used to generate the ID (if one
isn't provided), this will err out in VirtualBox because it doesn't
allow spaces for the --name argument. We should simply convert ' ' to
'_' as we do with other special characters.
This commit splits out the msys2 and cygwin path functions for
expanding a path with the cygpath tool. It also ensures that the tool
itself exists when the Which class is called so that it doesn't attempt
to escape slashes on nil.
Vagrant will verify that the current Ansible version does support the
requested compatibility mode (only applicable if not "auto", of course).
As mentioned in the documentation, there is no sanity checks between
`version` option and `compatibility_mode` option.
With this change, the host-based provisioner is also improved to
execute only once the "ansible" command (and store the gathered
information for multiple usages like version requirement and
compatibility checks). On the other hand, the guest-based provisioner
can still potentially execute "ansible" twice (once in the
AnsibleInstalled cap, and via "gather_ansible_version" function via
Base::set_compatibility_mode).
Before this change, only the ansible_local provisioner supported this
option (for ansible version requirement, and pip installation). Now, the
ansible host-based provisioner can also require a exact ansible version.
Resolve#8914
Note: this has been added as part of #6570 resolution, since the
introduction of the `compatibility_mode` auto-detection made both
provisioners made capable to detect ansible version.
Pending: optimize the code to avoid duplicated executions of "ansible
--version" command.
With this change, it is now possible to get rid of many deprecation
messages successively introduced in Ansible 1.9, and 2.0. More
interesting, the generated inventory will contain the recommended
variable names (e.g. `ansible_host` instead of `ansible_ssh_host`)
when the compatibility mode is set to '2.0'.
Details:
- Add `compatibility_mode` option to control the Ansible parameters
format to be used. The value corresponds to the minimal version
supported. For the moment, possible values are '1.8' (corresponding to
Vagrant's former behaviour) or '2.0'.
Note that a dynamic inventory generated in compatibility mode '2.0'
is not supported by Ansible 1.x. On the other hand, Ansible 2.x so far
supports inventory format generated by the compatibility mode '1.8'.
- Add compatibility mode auto-detection, based on the available Ansible
version. This is the default behaviour in order to bring a maximum of
user friendliness. The drawback of this approach is to let potential
compatibility breaking risks, for `ansible` provisioner setups that
already integrate Ansible 2.x **AND** rely on the existence of
the generated `_ssh` variable names. Thanks to the vagrant warnings
(and its release notes), I argue that it is worth to offer
auto-detection by default, which offers a sweet transition to most
users.
- Add `become`, `become_user` and `ask_become_pass` options and their
backwards compatible aliases. The legacy options are now deprecated.
Note that we intentionally didn't provide a '1.9' compatibility mode,
as it would add extra-complexity for practically no added-value.
To my knowledge, the Ansible 2.x series haven't introduced yet any major
changes or deprecations that would motivate to introduce a higher
version compatibility mode (to be confirmed/verified).
Resolve GH-6570
Still Pending:
- Optimization: Reduce the number of `ansible` command executions.
Currently two exec calls will be performed when the compatibility
mode auto-detection is enabled (i.e. by default). We could make the
provisioner a little bit smarter to only execute `ansible` only once
in any situation (by combining "presence" and "version" checks).
- User-friendliness: Add better validator on `compatibility_mode`
option, and shows a warning or an error instead of the silent
fallback on the auto-detection modus.
- Test coverage: All the added behaviours are not fully covered yet.
Prior to this commit, if you set up multiple folders to export with NFS
on linux with the exact same hostpath, the template used to write
/etc/exports would end up placing the same path with the same IP in
/etc/exports and cause an error preventing the folders from being
properly mounted. This commit fixes that by first looking at which
folders are being exported and if there are any duplicates. If so,
remove the duplicates and only export 1 hostpath folder. If these
duplicate folders have differing nfs linux options, an exception must be
thrown because we cannot assume which options the user intended to
export with.
The patterns "all" is a special keyword that target all hosts in the
inventory. Therefore it makes sense to accept "all:vars" as a group
variable name. Note that "*:vars" pattern is not valid in an Ansible
inventory.
See http://docs.ansible.com/ansible/latest/intro_patterns.html#patternsFix#7730
This commit aligns how the file provisioner should work on all host
machines. It ensures that a `/.` is only applied if the user intended
to upload a folder to a destination under a different name. It ensures
that if uploading to a windows guest with a different destination folder
name, it does not nest the source folder under that name so that it
works the same as it does on linux platforms. It also updates the
behavior of the winrm upload communicator by allowing an array of paths
to be uploaded instead of a single file or folder to allow for this new
functionality for windows guests.
This commit introduces the salt_arg option that allows a user to pass
additional command line flags to the `salt` tool when provisioning with
a master setup.
It also adds additional config validation to ensure that both
`salt_args` and `salt_call_args` is an array.
Prior to this commit, a change to how the IdentityFile setting for the
ssh command broke when a path with a space was used. This commit fixes
that by quoting the path used to set the IdentityFile so that it uses
the full path instead of part of the path after the space.
Prior to this commit, if the ssh-config command was invoked within
cygwin or msys2, it would show a regular windows style path for private
keys rather than a path that could be used within msys2 or cygwin. This
commit updates that behavior by converting all of the private key paths
to the proper msys2 or cygwin path if the platform is windows and the
command was invoked from one of those two shells.
Prior to this commit, when the guest capability attempted to expand a
path with spaces it would quote the path passed in. However if the path
also had a relative path those quotes would end up making `printf`
ignore it and not properly expand the path fully. This commit updates
that to first escape the quotes of a path and then pass in the new path
to be expanded.
Prior to this commit, when using a global id to bring up a vagrant vm,
vagrant would fail during the "install provider" step due to the fact
that the global vagrant machine was not configured for the local vagrant
environment. Since this global vm exists elsewhere, we disable the
install provider step so that vagrant can just bring up the global
vagrant machine.
Prior to this commit, there was no way to add additional ssh arguments
within a Vagrantfile for a given vagrant machine. This commit introduces
a new option extra_args that allows users to pass in a single argument
or an array of flags that will be added onto the ssh command.
Prior to this commit, the `vagrant validate` command would only validate
the first machine in a vagrant file. This commit improves that by
validating all known machines in the environment. If one is not found,
it will properly throw an exception instead of a stacktrace.
Prior to this commit, if a user passed in a script that was frozen,
the shell provisioner would fail to modify the script to replace line
endings for windows because the string was immutable. This commit fixes
that by dup'ing the string so that it can have its line endings replaced
Prior to this commit, if a user set the `destination` path to include a
space, the `shell_expand_guest_path` function would remove that space
and return a partial path. This commit updates that to quote the path to
be expanded to preserve the entire path.
Brian Cain
Chris Roberts
Chris Roberts
Zachary Flower
Gilles Cornu
Jan Vansteenkiste
Matthias Haag
Justin Campbell
Bernard Pietraga
Chris Roberts
Vít Ondruch
Bryce Shurts
Jonathan LaBroad
Erik Lattimore
Bryce Shurts
Rui Lopes