Prior to this commit, if a guest name was given as a symbol, the
filter_triggers method would fail to properly match it with the only_on
option, as it is not a valid type to the #String.match method. This
commit fixes that by converting the parameter to a string so that it can
be properly matched on the guest.
Prior to this commit, if a user ran a `vagrant box update` on their
entire environment and one of the boxes did not have a metadata file,
the rest of the boxes in the update would be skipped. This commit fixes
that by ignoring those boxes and showng a warning, so that the rest of
the boxes could check for updates.
Prior to this commit, Vagrant would list all machine snapshots in a flat
list, without showing which snapshots were associated with which guests.
This commit fixes that by placing some separation to make it clear which
snapshots belong to which guests.
Prior to this commit, the `abort` option for triggers would just call
`exit`, which would end up raising a SystemExit exception, signaling
Vagrant to abort. This broke down however in a multithreaded context
like when running multiple guests at once on supported providers,
resulting in Vagrant failing to exit cleanly and instead raise an
exception. This commit changes that by instead using `Process.exit!` to
abort Vagrant.
Prior to this commit, the docker compose driver would _always_ path
expand a host volume no matter what. This is not always the correct
option, for example if that host volume is actually a reference to a key
inside a `volumes` hash instead of a path on disk. This commit changes
that by looking to see if the requested host volume is actually a
defined key inside the compose config, and if not, it will path expand
it like before. Otherwise it will leave the key "as is".
Since a full path to the ssh executable is being used and is expected
at a specific location, default to providing that location when looking
up the executable. This prevents errors from occurring when a host
system provides an `ssh` match at a different path.
Before writing synced folder configuration data to the local
data directory run content through the credential scrubber to
remove any sensitive content before write.
This prevents credential information from being persisted into the
local data directory which is used during subsequent runs to determine
folder definition changes.
Prior to this commit, if a snapshot restore was run on an entire
environment with some non-existent guests, Vagrant would attempt to list
their snapshots with a nil id. This commit fixes that by returning an
empty list of snapshots if the machine has not been created yet.
According to ifconfig(8), to list only Ethernet interfaces, excluding
all other interface types, including the loopback interface, the command
to use should be:
ifconfig -l ether
Related to: #8760
This is a follow-up of #10717 to use the same naming convention as on
Linux guests, in order to reduce the diffs.
Also adds the missing capability to `unmount_virtualbox_shared_folder`
on FreeBSD guests.
This commit updates the behavior of how the docker provider creates new
docker networks. It looks at each existing network to see if the
requested subnet has already been configured in the docker engine. If
so, Vagrant will use that network rather than creating a new one. This
includes networks not created by Vagrant. Vagrant will not clean up
these networks if created outside of Vagrant.
Since the virtualbox guest additions seem to only be available for
freeBSD, move the shared folder functionality over to freebsd guests
rather than all BSD guests.
If the provider does not include a metadata.json file prior to
compressing the box, determine current provider and write
metadata.json file before compressing.
This update was prompted by updates in openssh to the scp behavior
making source directory paths suffixed with `.` no longer valid
resulting in errors on upload. The upload implementation within
the ssh communicator has been updated to retain the existing
behavior.
Included in this update is modifications to the winrm communicator
so the upload functionality matches that of the ssh communicator
respecting the trailing `.` behavior on source paths. With the
communicators updated to properly handle the paths, the file
provisioner was also updated to simply apply previously defined
path update rules only.
Fixes#10675
Prior to this commit, the AddAuthentication hooks still existed in a
deprecated class LoginCommand. This commit fixes that by moving it over
to the vagrant cloud cli namespace instead.
Prior to this commit, if a box some how got on disk that had an
incorrect or invalid version number that did not match Gem::Version,
Vagrant would throw an exception when attempting to generate a list of
the boxes on disk. This commit fixes that by looking at the version from
the path generated, and shows a warning to the user about the box and
skips it from the list so they at least know about the problematic box
and can still get a list of boxes.
This commit introduces some basic functionality for typed triggers:
- command
- action
Command triggers are triggers that will run before or after a given
sub-command.
Action triggers are for running triggers before or after internal
actions for Vagrant. This could be before or after a provision step,
before or after synced folders, or networking, etc.
This fixes issues with box add/update when self hosting with client
certs. The --cert option was not being added to the curl subprocess
in these cases.
Prior to this commit, if a debian system requested an DHCP address using
systemd-network, Vagrant would ignore it and instead use the configured
IP from the virtualbox network action. This commit fixes that by instead
looking if DHCP was requested, and if so, use that option for an IP.
Adds a `reboot` option which allows the guest to be rebooted after
the completion of a shell provisioning task. The guest must support
the `:reboot` capability. Like the `reset` option, the `reboot`
option may be provided without defining `inline` or `file` options
when a reboot may be required between other provisioners.
Fixes#8639
Adds a new `rsync__rsync_ownership` option to rsync based synced folders
which will allow rsync to use the `--chown` flag if it is available. The
`rsync` and `rsync-auto` commands have a new `--rsync-chown` flag which
can be used to force the option on folders when running the commands.
Fixes#7329#7332
This PR adds support for running command passed via the --command
flag as elevated tasks. The option is only valid for commands and
not when setting up a remote session. Logic has also been adjusted
for when communicator restrictions are applied and test coverage
has been added.
Extra options are extracted from the machine configuration for the
network being configured to allow for customized network manager
behavior. The network entries must be filtered to remove non-network
entries (like port forwards) before accessing by index.
Fixes#9546
Rescue and re-wrap any errors encountered when running the post
rsync capability. Rescue this exception type and notify of error
when encountered by rsync auto. Include test coverage.
Include config option within ssh_config command output template. Default
remote_user value to set username value. Include existence check on
provided config value to ensure file is available. Update tests to
include coverage on all changes. Add new options to the docs.
Both of these commands failed to default the options disabling
the provisioning from ignoring the sentinel file. This resulted
in different behavior than what was seen with the `up` and
`resume` commands which would only provision items with run set
to "always". This defaults the options to proper match the behavior
of `up` and `resume` to be consistent.
This also adds an extra `--no-start` flag to allow users to restore
a snapshot but not start the restored guest immediately.
Fixes#6752
When a large number of shares are defined it may cause the generated
command to exceed the maximum allowed length. To prevent this, only
allow 10 shares to be processed at a time.
Fixes#10483
Elevated commands can fail via winrm under certain conditions like
the machine name being changed. Detect this by checking for a known
exit code combined with known output included within stderr. If found,
attempt to re-execute the command using a machine prefixed username
if possible.
This commit introduces a special flag for enabling features that are not
ready for release. It can either be enabled by setting the
`VAGRANT_EXPERIMENTAL` flag to "1", or by setting it to a string of one
or more comma seperated values for specific features. It also adds a
couple of Vagrant developer focused methods for making it easier to
determine if the flag has been enabled, and if so, what features.
Prior to this commit, the package actions would create a temp dir in
the process of packaging and compressing a Vagrant box. This commit
ensures that the temp dir is removed once the command has completed so
that it doesn't leave around lots of temp directories.
Prior to this commit, Vagrant would attempt to path expand a file that
didn't exist if it was left out of the passed in arguments and no
`--url` was used for external box uploading. This commit fixes that by
adding some additional validation for the passed in box file.
Prior to this commit, if you went to validate your Vagrantfile and
wanted to ignore the provider, Vagrant would still fail as it checks if
there are any registered providers that are installed and usable. This
commit mocks out all registered providers to bypass that for the
validate command so that Vagrant can just validate the config and ignore
any provider config blocks.
In some cases the E1000 NIC type is the only acceptable value. Since
defaulting causes breakages to existing boxes, leave the default value
as `nil` but check the VirtualBox version in use and print warning to
user if VirtualBox version is vulnerable and E1000 NIC types are
configured for use within defined network adapters.
Be more restrictive when matching the port forward used for
SSH. Allow matching simply on the guest port, but also include
extra matching criteria for cases where multiple results may
be returned.
This commit updates how the trigger `run` inline option works by only
applying `Shellwords.split` to the inline command if it is going to be
run on non-Windows hosts. Otherwise pass the inline script directly to
be executed by Powershell.
Anders Kaseorg
Greg J Preece
Brian Cain
Chris Roberts
Alex Goncharov
Jose Luis Duran
Chris Roberts
Renato Aguiar
Andrew Eikum
Vidroha Debroy
Vidroha Debroy
Matt Adams
ngyuki
Iku Iwasa
Piotr Kliczewski
John Landis
Gavin Williams
Wolfgang Faust