1152 lines
56 KiB
YAML
1152 lines
56 KiB
YAML
en:
|
|
vagrant:
|
|
cfengine_bootstrapping: |-
|
|
Bootstrapping CFEngine with policy server: %{policy_server}...
|
|
cfengine_bootstrapping_policy_hub: |-
|
|
Performing additional bootstrap for policy hubs...
|
|
cfengine_cant_autodetect_ip: |-
|
|
Vagrant was unable to automatically detect the IP address of the
|
|
running machine to use as the policy server address. Please specify
|
|
the policy server address manually, or verify that the networks are
|
|
configured properly internally.
|
|
cfengine_cant_detect: |-
|
|
Vagrant doesn't support detecting whether CFEngine is installed
|
|
for the guest OS running in the machine. Vagrant will assume it is
|
|
installed and attempt to continue.
|
|
cfengine_detected_ip: |-
|
|
Detected policy server IP address: %{address}...
|
|
cfengine_installing: |-
|
|
Installing CFEngine onto machine...
|
|
cfengine_installing_files_path: |-
|
|
Copying the 'files_path' files...
|
|
cfengine_no_bootstrap: |-
|
|
CFEngine doesn't require bootstrap. Not bootstrapping.
|
|
cfengine_single_run: |-
|
|
CFEngine running in "single run" mode. Will execute one file.
|
|
cfengine_single_run_execute: |-
|
|
Executing run file for CFEngine...
|
|
chef_run_list_empty: |-
|
|
Warning: Chef solo run list is empty. This may not be what you want.
|
|
|
|
cfengine_config:
|
|
classes_array: |-
|
|
The 'classes' configuration must be an array.
|
|
files_path_not_directory: |-
|
|
The 'files_path' must point to a valid directory.
|
|
invalid_mode: |-
|
|
The mode must be 'bootstrap' or 'single_run'
|
|
policy_server_address: |-
|
|
The policy server address must be set for bootstrapping.
|
|
run_file_not_found: |-
|
|
The 'run_file' specified could not be found.
|
|
|
|
general:
|
|
batch_unexpected_error: |-
|
|
An unexpected error ocurred when executing the action on the
|
|
'%{machine}' machine. Please report this as a bug:
|
|
|
|
%{message}
|
|
batch_vagrant_error: |-
|
|
An error occurred while executing the action on the '%{machine}'
|
|
machine. Please handle this error then try again:
|
|
|
|
%{message}
|
|
config_upgrade_messages: |-
|
|
There were warnings and/or errors while loading your Vagrantfile.
|
|
Your Vagrantfile was written for an earlier version of Vagrant,
|
|
and while Vagrant does the best it can to remain backwards
|
|
compatible, there are some cases where things have changed
|
|
significantly enough to warrant a message. These messages are
|
|
shown below.
|
|
|
|
%{output}
|
|
moving_home_dir: "Moving old Vagrant home directory to new location: %{directory}"
|
|
home_dir_migration_failed: |-
|
|
Both an old and new Vagrant home directory exist. Only the new one will
|
|
be used. Please merge the old directory into the new directory if you'd
|
|
like to use the old data as well.
|
|
|
|
Old: %{old}
|
|
New: %{new}
|
|
in_bundler: |-
|
|
You appear to be running Vagrant in a Bundler environment. Because
|
|
Vagrant should be run within installers (outside of Bundler), Vagrant
|
|
will assume that you're developing plugins and will change its behavior
|
|
in certain ways to better assist plugin development.
|
|
not_in_installer: |-
|
|
You appear to be running Vagrant outside of the official installers.
|
|
Note that the installers are what ensure that Vagrant has all required
|
|
dependencies, and Vagrant assumes that these dependencies exist. By
|
|
running outside of the installer environment, Vagrant may not function
|
|
properly. To remove this warning, install Vagrant using one of the
|
|
official packages from vagrantup.com.
|
|
upgraded_v1_dotfile: |-
|
|
A Vagrant 1.0.x state file was found for this environment. Vagrant has
|
|
gone ahead and auto-upgraded this to the latest format. Everything
|
|
should continue working as normal. Beware, however, that older versions
|
|
of Vagrant may no longer be used with this environment.
|
|
|
|
However, in case anything went wrong, the old dotfile was backed up
|
|
to the location below. If everything is okay, it is safe to remove
|
|
this backup.
|
|
|
|
Backup: %{backup_path}
|
|
|
|
#-------------------------------------------------------------------------------
|
|
# Translations for exception classes
|
|
#-------------------------------------------------------------------------------
|
|
errors:
|
|
active_machine_with_different_provider: |-
|
|
An active machine was found with a different provider. Vagrant
|
|
currently allows each machine to be brought up with only a single
|
|
provider at a time. A future version will remove this limitation.
|
|
Until then, please destroy the existing machine to up with a new
|
|
provider.
|
|
|
|
Machine name: %{name}
|
|
Active provider: %{active_provider}
|
|
Requested provider: %{requested_provider}
|
|
ansible_playbook_app_not_found: |-
|
|
The "ansible-playbook" program could not be found! Please verify
|
|
that "ansible-playbook" is available on the PATH of your host
|
|
system, and try again.
|
|
|
|
If you haven't installed Ansible yet, please install Ansible
|
|
on your system. Vagrant can't do this for you in a safe, automated
|
|
way. Please see ansible.cc for more info.
|
|
base_vm_not_found: The base VM with the name '%{name}' was not found.
|
|
batch_multi_error: |-
|
|
An error occurred while executing multiple actions in parallel.
|
|
Any errors that occurred are shown below.
|
|
|
|
%{message}
|
|
box_config_changing_box: |-
|
|
While loading the Vagrantfile, the provider override specified
|
|
a new box. This box, in turn, specified a different box. This isn't
|
|
allowed, as it could lead to infinite recursion of Vagrant configuration
|
|
loading. Please fix this.
|
|
box_metadata_file_not_found: |-
|
|
The "metadata.json" file for the box '%{name}' was not found.
|
|
Boxes require this file in order for Vagrant to determine the
|
|
provider it was made for. If you made the box, please add a
|
|
"metadata.json" file to it. If someone else made the box, please
|
|
notify the box creator that the box is corrupt. Documentation for
|
|
box file format can be found at the URL below:
|
|
|
|
http://docs.vagrantup.com/v2/boxes/format.html
|
|
box_not_found: Box '%{name}' could not be found.
|
|
box_provider_doesnt_match: |-
|
|
The box you attempted to add doesn't match the provider you specified.
|
|
|
|
Provider expected: %{expected}
|
|
Provider of box: %{actual}
|
|
box_upgrade_required: |-
|
|
The box '%{name}' is still stored on disk in the Vagrant 1.0.x
|
|
format. This box must be upgraded in order to work properly with
|
|
this version of Vagrant.
|
|
cfengine_bootstrap_failed: |-
|
|
Failed to bootstrap CFEngine. Please see the output above to
|
|
see what went wrong and address the issue.
|
|
cfengine_install_failed: |-
|
|
After installing CFEngine, Vagrant still can't detect a proper
|
|
CFEngine installation. Please verify that CFEngine was properly
|
|
installed, as the installation may have failed.
|
|
cfengine_not_installed: |-
|
|
CFEngine appears to not be installed on the guest machine. Vagrant
|
|
can attempt to install CFEngine for you if you set the "install"
|
|
setting to "true", but this setting was not set. Please install
|
|
CFEngine on the guest machine or enable the "install" setting for
|
|
Vagrant to attempt to install it for you.
|
|
cli_invalid_options: |-
|
|
An invalid option was specified. The help for this command
|
|
is available below.
|
|
|
|
%{help}
|
|
cli_invalid_usage: |-
|
|
This command was not invoked properly. The help for this command is
|
|
available below.
|
|
|
|
%{help}
|
|
command_unavailable: |-
|
|
The executable '%(file)' Vagrant is trying to run was not
|
|
found in the PATH variable. This is an error. Please verify
|
|
this software is installed and on the path.
|
|
command_unavailable_windows: |-
|
|
The executable '%(file)' Vagrant is trying to run was not
|
|
found in the %PATH% variable. This is an error. Please verify
|
|
this software is installed and on the path.
|
|
config_invalid: |-
|
|
There are errors in the configuration of this machine. Please fix
|
|
the following errors and try again:
|
|
|
|
%{errors}
|
|
config_upgrade_errors: |-
|
|
Because there were errors upgrading your Vagrantfiles, Vagrant
|
|
can no longer continue. Please fix the errors above and try again.
|
|
copy_private_key_failed: |-
|
|
Vagrant failed to copy the default insecure private key into your
|
|
home directory. This is usually caused by a permissions error.
|
|
Please make sure the permissions of the source is readable and
|
|
the destination is writable.
|
|
|
|
Source: %{source}
|
|
Destination: %{destination}
|
|
destroy_requires_force: |-
|
|
Destroy doesn't have a TTY to ask for confirmation. Please pass the
|
|
`--force` flag to force a destroy, otherwise attach a TTY so that
|
|
the destroy can be confirmed.
|
|
dotfile_is_directory: |-
|
|
The local file Vagrant uses to store data ".vagrant" already exists
|
|
and is a directory! If you are in your home directory, then please run
|
|
this command in another directory. If you aren't in a home directory,
|
|
then please rename ".vagrant" to something else, or configure Vagrant
|
|
to use another filename by modifying `config.vagrant.dotfile_name`.
|
|
dotfile_upgrade_json_error: |-
|
|
A Vagrant 1.0.x local state file was found. Vagrant is able to upgrade
|
|
this to the latest format automatically, however various checks are
|
|
put in place to verify data isn't incorrectly deleted. In this case,
|
|
the old state file was not valid JSON. Vagrant 1.0.x would store state
|
|
as valid JSON, meaning that this file was probably tampered with or
|
|
manually edited. Vagrant's auto-upgrade process cannot continue in this
|
|
case.
|
|
|
|
In most cases, this can be resolve by simply removing the state file.
|
|
Note however though that if Vagrant was previously managing virtual
|
|
machines, they may be left in an "orphan" state. That is, if they are
|
|
running or exist, they'll have to manually be removed.
|
|
|
|
If you're unsure what to do, ask the Vagrant mailing list or contact
|
|
support.
|
|
|
|
State file path: %{state_file}
|
|
downloader_error: |-
|
|
An error occurred while downloading the remote file. The error
|
|
message, if any, is reproduced below. Please fix this error and try
|
|
again.
|
|
|
|
%{message}
|
|
downloader_interrupted: |-
|
|
The download was interrupted by an external signal. It did not
|
|
complete.
|
|
environment_locked: |-
|
|
An instance of Vagrant is already running. Only one instance of Vagrant
|
|
may run at any given time to avoid problems with VirtualBox inconsistencies
|
|
occurring. Please wait for the other instance of Vagrant to end and then
|
|
try again.
|
|
forward_port_adapter_not_found: |-
|
|
The adapter to attach a forwarded port to was not found. Please
|
|
verify that the given adapter is setup on the machine as a NAT
|
|
interface.
|
|
|
|
Host port: %{host}
|
|
Guest port: %{guest}
|
|
Adapter: %{adapter}
|
|
gem_command_in_bundler: |-
|
|
You cannot run the `vagrant plugin` command while in a bundler environment.
|
|
This should generally never happen unless Vagrant is installed outside
|
|
of the official installers or another gem is wrongly attempting to
|
|
use Vagrant internals directly. Please properly install Vagrant to
|
|
fix this. If this error persists, please contact support.
|
|
guest_capability_invalid: |-
|
|
The registered guest capability '%{cap}' for the
|
|
detected guest OS '%{guest}' is invalid. The capability does
|
|
not implement the proper method. This is a bug with Vagrant or the
|
|
plugin that implements this capability. Please report a bug.
|
|
guest_capability_not_found: |-
|
|
Vagrant attempted to execute the capability '%{cap}'
|
|
on the detect guest OS '%{guest}', but the guest doesn't
|
|
support that capability. This capability is required for your
|
|
configuration of Vagrant. Please either reconfigure Vagrant to
|
|
avoid this capability or fix the issue by creating the capability.
|
|
guest_not_detected: |-
|
|
The guest operating system of the machine could not be detected!
|
|
Vagrant requires this knowledge to perform specific tasks such
|
|
as mounting shared folders and configuring networks. Please add
|
|
the ability to detect this guest operating system to Vagrant
|
|
by creating a plugin or reporting a bug.
|
|
home_dir_not_accessible: |-
|
|
The home directory you specified is not accessible. The home
|
|
directory that Vagrant uses must be both readable and writable.
|
|
|
|
You specified: %{home_path}
|
|
interrupted: |-
|
|
Vagrant exited after cleanup due to external interrupt.
|
|
local_data_dir_not_accessible: |-
|
|
The directory Vagrant will use to store local environment-specific
|
|
state is not accessible. The directory specified as the local data
|
|
directory must be both readable and writable for the user that is
|
|
running Vagrant.
|
|
|
|
Local data directory: %{local_data_path}
|
|
linux_mount_failed: |-
|
|
Failed to mount folders in Linux guest. This is usually beacuse
|
|
the "vboxsf" file system is not available. Please verify that
|
|
the guest additions are properly installed in the guest and
|
|
can work properly. The command attempted was:
|
|
|
|
%{command}
|
|
linux_nfs_mount_failed: |-
|
|
Mounting NFS shared folders failed. This is most often caused by the NFS
|
|
client software not being installed on the guest machine. Please verify
|
|
that the NFS client software is properly installed, and consult any resources
|
|
specific to the linux distro you're using for more information on how to
|
|
do this.
|
|
linux_shell_expand_failed: |-
|
|
Vagrant failed to determine the shell expansion of the guest path
|
|
for one of your shared folders. This is an extremely rare error case
|
|
and most likely indicates an unusual configuration of the guest system.
|
|
Please report a bug with your Vagrantfile.
|
|
machine_guest_not_ready: |-
|
|
Guest-specific operations were attempted on a machine that is not
|
|
ready for guest communication. This should not happen and a bug
|
|
should be reported.
|
|
machine_not_found: |-
|
|
The machine with the name '%{name}' was not found configured for
|
|
this Vagrant environment.
|
|
machine_state_invalid: |-
|
|
An internal error has occurred! The provider of the machine you're
|
|
trying to work with reported an invalid state. This is a bug with
|
|
the provider you're using, and not with Vagrant itself or with
|
|
any configuration you may have done. Please report this bug to
|
|
the proper location.
|
|
multi_vm_required: |-
|
|
A multi-vm environment is required for name specification to this command.
|
|
multi_vm_target_required: |-
|
|
This command requires a specific VM name to target in a multi-VM environment.
|
|
nfs_no_guest_ip: |-
|
|
No guest IP was given to the Vagrant core NFS helper. This is an
|
|
internal error that should be reported as a bug.
|
|
nfs_no_host_ip: |-
|
|
No host IP was given to the Vagrant core NFS helper. This is
|
|
an internal error that should be reported as a bug.
|
|
nfs_no_hostonly_network: |-
|
|
NFS requires a host-only network with a static IP to be created.
|
|
Please add a host-only network with a static IP to the machine
|
|
for NFS to work.
|
|
no_env: |-
|
|
A Vagrant environment is required to run this command. Run `vagrant init`
|
|
to set one up in this directory, or change to a directory with a
|
|
Vagrantfile and try again.
|
|
plugin_gem_error: |-
|
|
An error occurred within RubyGems, the underlying system used to
|
|
manage Vagrant plugins. The output of the errors are shown below:
|
|
|
|
%{output}
|
|
plugin_install_bad_entry_point: |-
|
|
Attempting to load the plugin '%{name}' failed, because
|
|
the entry point doesn't exist. The entry point attempted was
|
|
'%{entry_point}'. If this is not correct, please manually
|
|
specify an `--entry-point` when installing the plugin.
|
|
plugin_install_license_not_found: |-
|
|
The license file to install could not be found. Please verify
|
|
the path you gave is correct. The path to the license file given
|
|
was: '%{path}'
|
|
plugin_install_not_found: |-
|
|
The plugin '%{name}' could not be found in local or remote
|
|
repositories. Please check the name of the plugin and try again.
|
|
plugin_load_error: |-
|
|
The plugin "%{plugin}" could not be found. Please make sure that it is
|
|
properly installed via `vagrant plugin`. Note that plugins made for
|
|
Vagrant 1.0.x are not compatible with 1.1+ and this error will likely
|
|
continue to show when you use `plugin install` with a 1.0.x plugin.
|
|
plugin_load_failed: |-
|
|
Failed to load the "%{plugin}" plugin. View logs for more details.
|
|
plugin_load_failed_with_output: |-
|
|
Failed to load the "%{plugin}" plugin. The output from loading
|
|
the plugin is shown below. View the logs for complete details.
|
|
|
|
stdout: %{stdout}
|
|
|
|
stderr: %{stderr}
|
|
plugin_not_found: |-
|
|
The plugin '%{name}' could not be found. Please install this plugin
|
|
prior to attempting to do anything with it.
|
|
port_collision_resume: |-
|
|
This VM cannot be resumed, because the forwarded ports would collide
|
|
with a running program (it could be another virtual machine). Normally,
|
|
Vagrant will attempt to fix this for you but VirtualBox only allows
|
|
forwarded ports to change if the VM is powered off. Therefore, please
|
|
reload your VM or stop the other program to continue.
|
|
provider_not_found: |-
|
|
The provider '%{provider}' could not be found, but was requested to
|
|
back the machine '%{machine}'. Please use a provider that exists.
|
|
scp_permission_denied: |-
|
|
Failed to upload a file to the guest VM via SCP due to a permissions
|
|
error. This is normally because the user running Vagrant doesn't have
|
|
read permission on the file. Please set proper permissions on the file:
|
|
|
|
%{path}
|
|
scp_unavailable: |-
|
|
SSH server on the guest doesn't support SCP. Please install the necessary
|
|
software to enable SCP on your guest operating system.
|
|
shared_folder_create_failed: |-
|
|
Failed to create the following shared folder on the host system. This is
|
|
usually because Vagrant does not have sufficient permissions to create
|
|
the folder.
|
|
|
|
%{path}
|
|
|
|
Please create the folder manually or specify another path to share.
|
|
ssh_authentication_failed: |-
|
|
SSH authentication failed! This is typically caused by the public/private
|
|
keypair for the SSH user not being properly set on the guest VM. Please
|
|
verify that the guest VM is setup with the proper public key, and that
|
|
the private key path for Vagrant is setup properly as well.
|
|
ssh_bad_exit_status: |-
|
|
The following SSH command responded with a non-zero exit status.
|
|
Vagrant assumes that this means the command failed!
|
|
|
|
%{command}
|
|
ssh_connect_eacces: |-
|
|
SSH is getting permission denied errors when attempting to connect
|
|
to the IP for SSH. This is usually caused by network rules and not being
|
|
able to connect to the specified IP. Please try changing the IP on
|
|
which the guest machine binds to for SSH.
|
|
ssh_connection_refused: |-
|
|
SSH connection was refused! This usually happens if the VM failed to
|
|
boot properly. Some steps to try to fix this: First, try reloading your
|
|
VM with `vagrant reload`, since a simple restart sometimes fixes things.
|
|
If that doesn't work, destroy your VM and recreate it with a `vagrant destroy`
|
|
followed by a `vagrant up`. If that doesn't work, contact a Vagrant
|
|
maintainer (support channels listed on the website) for more assistance.
|
|
ssh_connection_reset: |-
|
|
SSH connection was reset! This usually happens when the machine is
|
|
taking too long to reboot. First, try reloading your machine with
|
|
`vagrant reload`, since a simple restart sometimes fixes things.
|
|
If that doesn't work, destroy your machine and recreate it with
|
|
a `vagrant destroy` followed by a `1vagrant up`. If that doesn't work,
|
|
contact support.
|
|
ssh_connection_timeout: |-
|
|
Vagrant timed out while attempting to connect via SSH. This usually
|
|
means that the VM booted, but there are issues with the SSH configuration
|
|
or network connectivity issues. Please try to `vagrant reload` or
|
|
`vagrant up` again.
|
|
ssh_disconnected: |-
|
|
The SSH connection was unexpectedly closed by the remote end. This
|
|
usually indicates that SSH within the guest machine was unable to
|
|
properly start up. Please boot the VM in GUI mode to check whether
|
|
it is booting properly.
|
|
ssh_no_route: |-
|
|
While attempting to connect with SSH, a "no route to host" (EHOSTUNREACH)
|
|
error was received. Please verify your network settings are correct
|
|
and try again.
|
|
ssh_host_down: |-
|
|
While attempting to connect with SSH, a "host is down" (EHOSTDOWN)
|
|
error was received. Please verify your SSH settings are correct
|
|
and try again.
|
|
ssh_is_putty_link: |-
|
|
The `ssh` executable found in the PATH is a PuTTY Link SSH client.
|
|
Vagrant is only compatible with OpenSSH SSH clients. Please install
|
|
an OpenSSH SSH client or manually SSH in using your existing client
|
|
using the information below.
|
|
|
|
Host: %{host}
|
|
Port: %{port}
|
|
Username: %{username}
|
|
Private key: %{key_path}
|
|
ssh_key_bad_owner: |-
|
|
The private key to connect to the machine via SSH must be owned
|
|
by the user running Vagrant. This is a strict requirement from
|
|
SSH itself. Please fix the following key to be owned by the user
|
|
running Vagrant:
|
|
|
|
%{key_path}
|
|
ssh_key_bad_permissions: |-
|
|
The private key to connect to this box via SSH has invalid permissions
|
|
set on it. The permissions of the private key should be set to 0600, otherwise SSH will
|
|
ignore the key. Vagrant tried to do this automatically for you but failed. Please set the
|
|
permissions on the following file to 0600 and then try running this command again:
|
|
|
|
%{key_path}
|
|
ssh_key_type_not_supported: |-
|
|
The private key you're attempting to use with this Vagrant box uses
|
|
an unsupported encryption type. The SSH library Vagrant uses does not support
|
|
this key type. Please use `ssh-rsa` or `ssh-dss` instead. Note that
|
|
sometimes keys in your ssh-agent can interfere with this as well,
|
|
so verify the keys are valid there in addition to standard
|
|
file paths.
|
|
ssh_not_ready: |-
|
|
The provider for this Vagrant-managed machine is reporting that it
|
|
is not yet ready for SSH. Depending on your provider this can carry
|
|
different meanings. Make sure your machine is created and running and
|
|
try again. Additionally, check the output of `vagrant status` to verify
|
|
that the machine is in the state that you expect. If you continue to
|
|
get this error message, please view the documentation for the provider
|
|
you're using.
|
|
ssh_port_not_detected: |-
|
|
Vagrant couldn't determine the SSH port for your VM! Vagrant attempts to
|
|
automatically find a forwarded port that matches your `config.ssh.guest_port`
|
|
(default: 22) value and uses this for SSH. Alternatively, if `config.ssh.port`
|
|
is set, it will use this.
|
|
|
|
However, in this case Vagrant was unable to find a forwarded port that matches
|
|
the guest port and `config.ssh.port` is not set!
|
|
|
|
Please make sure that you have a forwarded port that goes to the configured
|
|
guest port value, or specify an explicit SSH port with `config.ssh.port`.
|
|
ssh_unavailable: "`ssh` binary could not be found. Is an SSH client installed?"
|
|
ssh_unavailable_windows: |-
|
|
`ssh` executable not found in any directories in the %PATH% variable. Is an
|
|
SSH client installed? Try installing Cygwin, MinGW or Git, all of which
|
|
contain an SSH client. Or use the PuTTY SSH client with the following
|
|
authentication information shown below:
|
|
|
|
Host: %{host}
|
|
Port: %{port}
|
|
Username: %{username}
|
|
Private key: %{key_path}
|
|
ui_expects_tty: |-
|
|
Vagrant is attempting to interface with the UI in a way that requires
|
|
a TTY. Most actions in Vagrant that require a TTY have configuration
|
|
switches to disable this requirement. Please do that or run Vagrant
|
|
with TTY.
|
|
unimplemented_provider_action: |-
|
|
Vagrant attempted to call the action '%{action}' on the provider
|
|
'%{provider}', but this provider doesn't support this action. This
|
|
is probably a bug in either the provider or the plugin calling this
|
|
action, and should be reported.
|
|
vagrantfile_exists: |-
|
|
`Vagrantfile` already exists in this directory. Remove it before
|
|
running `vagrant init`.
|
|
vagrantfile_load_error: |-
|
|
There was an error loading a Vagrantfile. The file being loaded
|
|
and the error message are shown below. This is usually caused by
|
|
a syntax error.
|
|
|
|
Path: %{path}
|
|
Message: %{message}
|
|
vagrantfile_syntax_error: |-
|
|
There is a syntax error in the following Vagrantfile. The syntax error
|
|
message is reproduced below for convenience:
|
|
|
|
%{file}
|
|
vboxmanage_error: |-
|
|
There was an error while executing `VBoxManage`, a CLI used by Vagrant
|
|
for controlling VirtualBox. The command and stderr is shown below.
|
|
|
|
Command: %{command}
|
|
|
|
Stderr: %{stderr}
|
|
vboxmanage_not_found_error: |-
|
|
The "VBoxManage" command or one of its dependencies could not
|
|
be found. Please verify VirtualBox is properly installed. You can verify
|
|
everything is okay by running "VBoxManage --version" and verifying
|
|
that the VirtualBox version is outputted.
|
|
virtualbox_invalid_version: |-
|
|
Vagrant has detected that you have a version of VirtualBox installed
|
|
that is not supported. Please install one of the supported versions
|
|
listed below to use Vagrant:
|
|
|
|
%{supported_versions}
|
|
virtualbox_kernel_module_not_loaded: |-
|
|
VirtualBox is complaining that the kernel module is not loaded. Please
|
|
run `VBoxManage --version` or open the VirtualBox GUI to see the error
|
|
message which should contain instructions on how to fix this error.
|
|
virtualbox_install_incomplete: |-
|
|
VirtualBox is complaining that the installation is incomplete. Please
|
|
run `VBoxManage --version` to see the error message which should contain
|
|
instructions on how to fix this error.
|
|
virtualbox_no_room_for_high_level_network: |-
|
|
There is no available slots on the VirtualBox VM for the configured
|
|
high-level network interfaces. "private_network" and "public_network"
|
|
network configurations consume a single network adapter slot on the
|
|
VirtualBox VM. VirtualBox limits the number of slots to 8, and it
|
|
appears that every slot is in use. Please lower the number of used
|
|
network adapters.
|
|
virtualbox_not_detected: |-
|
|
Vagrant could not detect VirtualBox! Make sure VirtualBox is properly installed.
|
|
Vagrant uses the `VBoxManage` binary that ships with VirtualBox, and requires
|
|
this to be available on the PATH. If VirtualBox is installed, please find the
|
|
`VBoxManage` binary and add it to the PATH environmental variable.
|
|
vm_creation_required: |-
|
|
VM must be created before running this command. Run `vagrant up` first.
|
|
vm_inaccessible: |-
|
|
Your VM has become "inaccessible." Unfortunately, this is a critical error
|
|
with VirtualBox that Vagrant can not cleanly recover from. Please open VirtualBox
|
|
and clear out your inaccessible virtual machines or find a way to fix
|
|
them.
|
|
vm_name_exists: |-
|
|
A VirtualBox machine with the name '%{name}' already exists.
|
|
Please use another name or delete the machine with the existing
|
|
name, and try again.
|
|
vm_no_match: |-
|
|
No virtual machines matched the regular expression given.
|
|
vm_not_found: |-
|
|
A VM by the name of %{name} was not found.
|
|
vm_not_running: |-
|
|
VM must be running to open SSH connection. Run `vagrant up`
|
|
to start the virtual machine.
|
|
|
|
#-------------------------------------------------------------------------------
|
|
# Translations for config validation errors
|
|
#-------------------------------------------------------------------------------
|
|
config:
|
|
common:
|
|
bad_field: "The following settings don't exist: %{fields}"
|
|
error_empty: "`%{field}` must be not be empty."
|
|
chef:
|
|
cookbooks_path_empty: "Must specify a cookbooks path for chef solo."
|
|
cookbooks_path_missing: |-
|
|
Cookbook path doesn't exist: %{path}
|
|
custom_config_path_missing: |-
|
|
Path specified for "custom_config_path" does not exist.
|
|
server_url_empty: "Chef server URL must be populated."
|
|
validation_key_path: "Validation key path must be valid path to your chef server validation key."
|
|
loader:
|
|
bad_v1_key: |-
|
|
Unknown configuration section '%{key}'. If this section was part of
|
|
a Vagrant 1.0.x plugin, note that 1.0.x plugins are incompatible with 1.1+.
|
|
root:
|
|
bad_key: |-
|
|
Unknown configuration section '%{key}'.
|
|
ssh:
|
|
private_key_missing: "`private_key_path` file must exist: %{path}"
|
|
vm:
|
|
base_mac_invalid: "Base MAC address for eth0/NAT must be set. Contact box maintainer for more information."
|
|
box_missing: "A box must be specified."
|
|
box_not_found: "The box '%{name}' could not be found."
|
|
hostname_invalid_characters: |-
|
|
The hostname set for the VM should only contain letters, numbers,
|
|
and hyphens.
|
|
network_invalid: |-
|
|
The network type '%{type}' is not valid. Please use
|
|
'hostonly' or 'bridged'.
|
|
network_ip_invalid: |-
|
|
The host only network IP '%{ip}' is invalid.
|
|
network_ip_ends_one: |-
|
|
The host only network IP '%{ip}' must not end in a 1, as this
|
|
is reserved for the host machine.
|
|
nfs_not_supported: |-
|
|
It appears your machine doesn't support NFS, or there is not an
|
|
adapter to enable NFS on this machine for Vagrant. Please verify
|
|
that `nfsd` is installed on your machine, and try again. If you're
|
|
on Windows, NFS isn't supported. If the problem persists, please
|
|
contact Vagrant support.
|
|
nfs_requires_host: |-
|
|
Using NFS shared folders requires a host to be specified
|
|
using `config.vagrant.host`.
|
|
network_ip_required: |-
|
|
An IP is required for a private network.
|
|
network_fp_host_not_unique: |-
|
|
Forwarded port '%{host}' (host port) is declared multiple times
|
|
network_fp_requires_ports: |-
|
|
Forwarded port definitions require a "host" and "guest" value
|
|
network_type_invalid: |-
|
|
Network type '%{type}' is invalid. Please use a valid network type.
|
|
provisioner_not_found: |-
|
|
The '%{name}' provisioner could not be found.
|
|
shared_folder_guestpath_duplicate: |-
|
|
A shared folder guest path is used multiple times. Shared
|
|
folders must all map to a unique guest path: %{path}
|
|
shared_folder_guestpath_relative: |-
|
|
The shared folder guest path must be absolute: %{path}
|
|
shared_folder_hostpath_missing: |-
|
|
The host path of the shared folder is missing: %{path}
|
|
shared_folder_nfs_owner_group: |-
|
|
Shared folder that have NFS enabled do no support owner/group
|
|
attributes. Host path: %{path}
|
|
|
|
#-------------------------------------------------------------------------------
|
|
# Translations for commands. e.g. `vagrant x`
|
|
#-------------------------------------------------------------------------------
|
|
commands:
|
|
common:
|
|
vm_already_running: |-
|
|
VirtualBox VM is already running.
|
|
vm_not_created: "VM not created. Moving on..."
|
|
vm_not_running: "VM is not currently running. Please bring it up to run this command."
|
|
box:
|
|
remove_must_specify_provider: |-
|
|
Multiple providers were found for the box '%{name}'. Please specify
|
|
the specific provider for the box you want to remove. The list of
|
|
providers backing this box is:
|
|
|
|
'%{providers}'
|
|
|
|
To remove the box for a specific provider, run the following command,
|
|
filling in PROVIDER with one of the providers above:
|
|
|
|
vagrant box remove '%{name}' PROVIDER
|
|
no_installed_boxes: "There are no installed boxes! Use `vagrant box add` to add some."
|
|
removing: |-
|
|
Removing box '%{name}' with provider '%{provider}'...
|
|
destroy:
|
|
confirmation: "Are you sure you want to destroy the '%{name}' VM? [y/N] "
|
|
will_not_destroy: |-
|
|
The VM '%{name}' will not be destroyed, since the confirmation
|
|
was declined.
|
|
init:
|
|
success: |-
|
|
A `Vagrantfile` has been placed in this directory. You are now
|
|
ready to `vagrant up` your first virtual environment! Please read
|
|
the comments in the Vagrantfile as well as documentation on
|
|
`vagrantup.com` for more information on using Vagrant.
|
|
plugin:
|
|
installed_license: |-
|
|
The license for '%{name}' was successfully installed!
|
|
installing_license: |-
|
|
Installing license for '%{name}'...
|
|
no_plugins: |-
|
|
No plugins installed.
|
|
installed: |-
|
|
Installed the plugin '%{name} (%{version})'!
|
|
installing: |-
|
|
Installing the '%{name}' plugin. This can take a few minutes...
|
|
uninstalling: |-
|
|
Uninstalling the '%{name}' plugin...
|
|
status:
|
|
aborted: |-
|
|
The VM is in an aborted state. This means that it was abruptly
|
|
stopped without properly closing the session. Run `vagrant up`
|
|
to resume this virtual machine. If any problems persist, you may
|
|
have to destroy and restart the virtual machine.
|
|
gurumeditation: |-
|
|
The VM is in the "guru meditation" state. This is a rare case which means
|
|
that an internal error in VitualBox caused the VM to fail. This is always
|
|
the sign of a bug in VirtualBox. You can try to bring your VM back online
|
|
with a `vagrant up`.
|
|
inaccessible: |-
|
|
The VM is inaccessible! This is a rare case which means that VirtualBox
|
|
can't find your VM configuration. This usually happens when upgrading
|
|
VirtualBox, moving to a new computer, etc. Please consult VirtualBox
|
|
for how to handle this issue.
|
|
output: |-
|
|
Current machine states:
|
|
|
|
%{states}
|
|
|
|
%{message}
|
|
not_created: |-
|
|
The environment has not yet been created. Run `vagrant up` to
|
|
create the environment. If a machine is not created, only the
|
|
default provider will be shown. So if a provider is not listed,
|
|
then the machine is not created for that environment.
|
|
paused: |-
|
|
The VM is paused. This VM may have been paused via the VirtualBox
|
|
GUI or the VBoxManage command line interface. To unpause, please
|
|
use the VirtualBox GUI and/or VBoxManage command line interface so
|
|
that vagrant would be able to control the VM again.
|
|
poweroff: |-
|
|
The VM is powered off. To restart the VM, simply run `vagrant up`
|
|
running: |-
|
|
The VM is running. To stop this VM, you can run `vagrant halt` to
|
|
shut it down forcefully, or you can run `vagrant suspend` to simply
|
|
suspend the virtual machine. In either case, to restart it again,
|
|
simply run `vagrant up`.
|
|
saving: |-
|
|
The VM is currently saving its state. In a few moments this state
|
|
should transition to "saved." Please run `vagrant status` again
|
|
in a few seconds.
|
|
saved: |-
|
|
To resume this VM, simply run `vagrant up`.
|
|
stuck: |-
|
|
The VM is "stuck!" This is a very rare state which means that
|
|
VirtualBox is unable to recover the current state of the VM.
|
|
The only known solution to this problem is to restart your
|
|
machine, sorry.
|
|
listing: |-
|
|
This environment represents multiple VMs. The VMs are all listed
|
|
above with their current state. For more information about a specific
|
|
VM, run `vagrant status NAME`.
|
|
up:
|
|
upping: |-
|
|
Bringing machine '%{name}' up with '%{provider}' provider...
|
|
version:
|
|
output: "Vagrant version %{version}"
|
|
|
|
#-------------------------------------------------------------------------------
|
|
# Translations for Vagrant middleware acions
|
|
#-------------------------------------------------------------------------------
|
|
actions:
|
|
runner:
|
|
waiting_cleanup: "Waiting for cleanup before exiting..."
|
|
exit_immediately: "Exiting immediately, without cleanup!"
|
|
vm:
|
|
boot:
|
|
booting: Booting VM...
|
|
waiting: Waiting for VM to boot. This can take a few minutes.
|
|
ready: VM booted and ready for use!
|
|
failed: Failed to connect to VM!
|
|
failed_to_boot: |-
|
|
Failed to connect to VM via SSH. Please verify the VM successfully booted
|
|
by looking at the VirtualBox GUI.
|
|
failed_to_run: |-
|
|
The VM failed to remain in the "running" state while attempting to boot.
|
|
This is normally caused by a misconfiguration or host system incompatibilities.
|
|
Please open the VirtualBox GUI and attempt to boot the virtual machine
|
|
manually to get a more informative error message.
|
|
bridged_networking:
|
|
available: |-
|
|
Available bridged network interfaces:
|
|
bridging: |-
|
|
Bridging adapter #%{adapter} to '%{bridge}'
|
|
enabling: |-
|
|
Enabling bridged network...
|
|
preparing: |-
|
|
Preparing bridged networking...
|
|
specific_not_found: |-
|
|
Specific bridge '%{bridge}' not found. You may be asked to specify
|
|
which network to bridge to.
|
|
check_box:
|
|
not_found: |-
|
|
Box '%{name}' was not found. Fetching box from specified URL for
|
|
the provider '%{provider}'. Note that if the URL does not have
|
|
a box for this provider, you should interrupt Vagrant now and add
|
|
the box yourself. Otherwise Vagrant will attempt to download the
|
|
full box prior to discovering this error.
|
|
not_specified: |-
|
|
No base box was specified! A base box is required as a staring point
|
|
for every vagrant virtual machine. Please specify one in your Vagrantfile
|
|
using `config.vm.box`
|
|
does_not_exist: |-
|
|
Specified box `%{name}` does not exist!
|
|
|
|
The box must be added through the `vagrant box add` command. Please view
|
|
the documentation associated with the command for more information.
|
|
check_guest_additions:
|
|
not_detected: |-
|
|
No guest additions were detected on the base box for this VM! Guest
|
|
additions are required for forwarded ports, shared folders, host only
|
|
networking, and more. If SSH fails on this machine, please install
|
|
the guest additions and repackage the box to continue.
|
|
|
|
This is not an error message; everything may continue to work properly,
|
|
in which case you may ignore this message.
|
|
version_mismatch: |-
|
|
The guest additions on this VM do not match the installed version of
|
|
VirtualBox! In most cases this is fine, but in rare cases it can
|
|
cause things such as shared folders to not work properly. If you see
|
|
shared folder errors, please update the guest additions within the
|
|
virtual machine and reload your VM.
|
|
|
|
Guest Additions Version: %{guest_version}
|
|
VirtualBox Version: %{virtualbox_version}
|
|
clear_forward_ports:
|
|
deleting: Clearing any previously set forwarded ports...
|
|
clear_network_interfaces:
|
|
deleting: Clearing any previously set network interfaces...
|
|
clear_shared_folders:
|
|
deleting: Cleaning previously set shared folders...
|
|
customize:
|
|
failure: |-
|
|
A customization command failed:
|
|
|
|
%{command}
|
|
|
|
The following error was experienced:
|
|
|
|
%{error}
|
|
|
|
Please fix this customization and try again.
|
|
running: Running any VM customizations...
|
|
destroy:
|
|
destroying: Destroying VM and associated drives...
|
|
destroy_network:
|
|
destroying: Destroying unused networking interface...
|
|
disable_networks:
|
|
disabling: Disabling host only networks...
|
|
discard_state:
|
|
discarding: Discarding saved state of VM...
|
|
export:
|
|
create_dir: Creating temporary directory for export...
|
|
exporting: Exporting VM...
|
|
power_off: "The Vagrant virtual environment you are trying to package must be powered off."
|
|
forward_ports:
|
|
auto_empty: |-
|
|
Vagrant found a port collision for the specified port and virtual machine.
|
|
While this port was marked to be auto-corrected, the ports in the
|
|
auto-correction range are all also used.
|
|
|
|
VM: %{vm_name}
|
|
Forwarded port: %{guest_port} => %{host_port}
|
|
collision_error: |-
|
|
Vagrant cannot forward the specified ports on this VM, since they
|
|
would collide with some other application that is already listening
|
|
on these ports. The forwarded port to %{host_port} is already in use
|
|
on the host machine.
|
|
|
|
To fix this, modify your current projects Vagrantfile to use another
|
|
port. Example, where '1234' would be replaced by a unique host port:
|
|
|
|
config.vm.network :forwarded_port, guest: %{guest_port}, host: 1234
|
|
|
|
Sometimes, Vagrant will attempt to auto-correct this for you. In this
|
|
case, Vagrant was unable to. This is usually because the guest machine
|
|
is in a state which doesn't allow modifying port forwarding.
|
|
fixed_collision: |-
|
|
Fixed port collision for %{guest_port} => %{host_port}. Now on port %{new_port}.
|
|
forwarding: Forwarding ports...
|
|
forwarding_entry: |-
|
|
-- %{guest_port} => %{host_port} (adapter %{adapter})
|
|
non_nat: |-
|
|
VirtualBox adapter #%{adapter} not configured as "NAT". Skipping port
|
|
forwards on this adapter.
|
|
privileged_ports: |-
|
|
You are trying to forward to privileged ports (ports <= 1024). Most
|
|
operating systems restrict this to only privileged process (typically
|
|
processes running as an administrative user). This is a warning in case
|
|
the port forwarding doesn't work. If any problems occur, please try a
|
|
port higher than 1024.
|
|
halt:
|
|
force: |-
|
|
Forcing shutdown of VM...
|
|
graceful: |-
|
|
Attempting graceful shutdown of VM...
|
|
hostname:
|
|
setting: "Setting hostname..."
|
|
import:
|
|
importing: Importing base box '%{name}'...
|
|
failure: |-
|
|
The VM import failed! Try running `VBoxManage import` on the box file
|
|
manually for more verbose error output.
|
|
match_mac:
|
|
matching: Matching MAC address for NAT networking...
|
|
no_base_mac: |-
|
|
No base MAC address was specified. This is required for the NAT networking
|
|
to work properly (and hence port forwarding, SSH, etc.). Specifying this
|
|
MAC address is typically up to the box and box maintiner. Please contact
|
|
the relevant person to solve this issue.
|
|
network:
|
|
adapter_collision: |-
|
|
More than one network have been assigned to the same adapter. Please
|
|
make sure your networks you've configured in your Vagrantfile do not
|
|
overlap.
|
|
configuring: |-
|
|
Configuring and enabling network interfaces...
|
|
dhcp_already_attached: |-
|
|
A host only network interface you're attempting to configure via DHCP
|
|
already has a conflicting host only adapter with DHCP enabled. The
|
|
DHCP on this adapter is incompatible with the DHCP settings. Two
|
|
host only network interfaces are not allowed to overlap, and each
|
|
host only network interface can have only one DHCP server. Please
|
|
reconfigure your host only network or remove the virtual machine
|
|
using the other host only network.
|
|
no_adapters: |-
|
|
No available adapters on the virtual machine were found to accomodate
|
|
for all configured networks. VirtualBox virtual machines have 8
|
|
network interfaces available usually, so please lower the number of
|
|
networks to below 8.
|
|
preparing: |-
|
|
Preparing network interfaces based on configuration...
|
|
host_only_network:
|
|
collides: |-
|
|
The specified host network collides with a non-hostonly network!
|
|
This will cause your specified IP to be inaccessible. Please change
|
|
the IP or name of your host only network to not match that of
|
|
a bridged or non-hostonly network.
|
|
creating: "Creating new host only network for environment..."
|
|
enabling: "Enabling host only network..."
|
|
not_found: |-
|
|
The specified host network could not be found: '%{name}.'
|
|
If the name specification is removed, Vagrant will create a new
|
|
host only network for you. Alternatively, please create the
|
|
specified network manually.
|
|
preparing: "Preparing host only network..."
|
|
nfs:
|
|
exporting: Exporting NFS shared folders...
|
|
mounting: Mounting NFS shared folders...
|
|
persist:
|
|
dotfile_error: |-
|
|
The dotfile which Vagrant uses to store the UUID of the project's
|
|
virtual machine already exists and is not a file! The dotfile is
|
|
currently configured to be '%{dotfile_path}'
|
|
|
|
To change this value, please see `config.vagrant.dotfile_name`
|
|
|
|
Are you trying to use Vagrant from your home directory? This is the
|
|
leading cause of this error message. To resolve this, simply use a
|
|
different directory. Or, if you really want to run Vagrant from your
|
|
home directory, modify the `config.vagrant.dotfile_name` configuration
|
|
key.
|
|
persisting: "Persisting the VM UUID (%{uuid})..."
|
|
provision:
|
|
beginning: "Running provisioner: %{provisioner}..."
|
|
resume:
|
|
resuming: Resuming suspended VM...
|
|
unpausing: |-
|
|
Unpausing the VM...
|
|
share_folders:
|
|
creating: Creating shared folders metadata...
|
|
mounting: Mounting shared folders...
|
|
mounting_entry: "-- %{guest_path}"
|
|
nomount_entry: "-- Automounting disabled: %{host_path}"
|
|
set_name:
|
|
setting_name: |-
|
|
Setting the name of the VM...
|
|
suspend:
|
|
suspending: Saving VM state and suspending execution...
|
|
|
|
box:
|
|
unpackage:
|
|
untar_failure: |-
|
|
The box failed to unpackage properly. Please verify that the box
|
|
file you're trying to add is not corrupted and try again. The
|
|
output from attempting to unpackage (if any):
|
|
|
|
%{output}
|
|
already_exists: |-
|
|
The box you're attempting to add already exits:
|
|
|
|
Name: %{name}
|
|
Provider: %{provider}
|
|
add:
|
|
adding: |-
|
|
Extracting box...
|
|
added: |-
|
|
Successfully added box '%{name}' with provider '%{provider}'!
|
|
destroy:
|
|
destroying: "Deleting box '%{name}'..."
|
|
download:
|
|
cleaning: "Cleaning up downloaded box..."
|
|
downloading: "Downloading or copying the box..."
|
|
interrupted: "Box download was interrupted. Exiting."
|
|
verify:
|
|
verifying: "Verifying box..."
|
|
failed: |-
|
|
The box file you're attempting to add is invalid. This can be
|
|
commonly attributed to typos in the path given to the box add
|
|
command. Another common case of this is invalid packaging of the
|
|
box itself.
|
|
|
|
general:
|
|
package:
|
|
packaging: "Packaging additional file: %{file}"
|
|
compressing: "Compressing package to: %{tar_path}"
|
|
output_exists: |-
|
|
The specified file to save the package as already exists. Please
|
|
remove this file or specify a different file name for outputting.
|
|
output_is_directory: |-
|
|
The specified output is a directory. Please specify a path including
|
|
a filename.
|
|
requires_directory: |-
|
|
A directory was not specified to package. This should never happen
|
|
and is a result of an internal inconsistency.
|
|
include_file_missing: |-
|
|
Package include file doesn't exist: %{file}
|
|
|
|
downloaders:
|
|
file:
|
|
download: "Copying box to temporary location..."
|
|
file_missing: "The specified path to a file doesn't exist."
|
|
http:
|
|
connection_reset: |-
|
|
The remote server unexpectedly closed the connection. Vagrant was
|
|
unable to finish downloading the box. Please try again. If this
|
|
problem persists, please try downloading the box manually outside
|
|
of Vagrant, then adding the box from the filesystem.
|
|
connection_timeout: |-
|
|
Vagrant timed out while attempting to connect to the HTTP host.
|
|
Please check your internet and proxy settings and try again.
|
|
download: "Downloading box: %{url}"
|
|
socket_error: |-
|
|
An error occurred while trying to download the specified box. This most
|
|
often happens if there is no internet connection or the address is
|
|
invalid.
|
|
status_error: |-
|
|
Bad status code: %{status}
|
|
|
|
Please verify that the box exists and is accessible. Also verify that
|
|
this computer is properly connected to the internet.
|
|
|
|
hosts:
|
|
bsd:
|
|
nfs_export: |-
|
|
Preparing to edit /etc/exports. Administrator privileges will be required...
|
|
nfs_prune: |-
|
|
Pruning invalid NFS exports. Administrator privileges will be required...
|
|
linux:
|
|
nfs_export: |-
|
|
Preparing to edit /etc/exports. Administrator privileges will be required...
|
|
nfs_prune: |-
|
|
Pruning invalid NFS exports. Administrator privileges will be required...
|
|
arch:
|
|
nfs_export:
|
|
prepare: "Preparing to edit /etc/exports. Administrator privileges will be required..."
|
|
freebsd:
|
|
nfs_whitespace: |-
|
|
FreeBSD hosts do not support sharing directories with whitespace in
|
|
their path. Please adjust your path accordingly.
|
|
|
|
provisioners:
|
|
chef:
|
|
chef_not_detected: |-
|
|
The chef binary (either `chef-solo` or `chef-client`) was not found on
|
|
the VM and is required for chef provisioning. Please verify that chef
|
|
is installed and that the binary is available on the PATH.
|
|
cookbook_folder_not_found_warning:
|
|
"The cookbook path '%{path}' doesn't exist. Ignoring..."
|
|
json: "Generating chef JSON and uploading..."
|
|
client_key_folder: "Creating folder to hold client key..."
|
|
upload_validation_key: "Uploading chef client validation key..."
|
|
upload_encrypted_data_bag_secret_key: "Uploading chef encrypted data bag secret key..."
|
|
running_client: "Running chef-client..."
|
|
running_client_again: "Running chef-client again (failed to converge)..."
|
|
running_solo: "Running chef-solo..."
|
|
running_solo_again: "Running chef-solo again (failed to converge)..."
|
|
missing_shared_folders: |-
|
|
Shared folders that Chef requires are missing on the virtual machine.
|
|
This is usually due to configuration changing after already booting the
|
|
machine. The fix is to run a `vagrant reload` so that the proper shared
|
|
folders will be prepared and mounted on the VM.
|
|
no_convergence: |-
|
|
Chef never successfully completed! Any errors should be visible in the
|
|
output above. Please fix your recipes so that they properly complete.
|
|
not_detected: |-
|
|
The `%{binary}` binary appears to not be in the PATH of the guest. This
|
|
could be because the PATH is not properly setup or perhaps chef is not
|
|
installed on this guest. Chef provisioning can not continue without
|
|
chef properly installed.
|
|
server_url_required: |-
|
|
Chef server provisioning requires that the `config.chef.chef_server_url` be set to the
|
|
URL of your chef server. Examples include "http://12.12.12.12:4000" and
|
|
"http://myserver.com:4000" (the port of course can be different, but 4000 is the default)
|
|
server_validation_key_required: |-
|
|
Chef server provisioning requires that the `config.chef.validation_key_path` configuration
|
|
be set to a path on your local machine of the validation key used to register the
|
|
VM with the chef server.
|
|
server_validation_key_doesnt_exist: |-
|
|
The validation key set for `config.chef.validation_key_path` does not exist! This
|
|
file needs to exist so it can be uploaded to the virtual machine.
|
|
|
|
puppet:
|
|
not_detected: |-
|
|
The `%{binary}` binary appears to not be in the PATH of the guest. This
|
|
could be because the PATH is not properly setup or perhaps Puppet is not
|
|
installed on this guest. Puppet provisioning can not continue without
|
|
Puppet properly installed.
|
|
running_puppet: "Running Puppet with %{manifest}..."
|
|
manifest_missing: |-
|
|
The configured Puppet manifest is missing. Please specify a path to an
|
|
existing manifest:
|
|
|
|
%{manifest}
|
|
manifests_path_missing: "The manifests path specified for Puppet does not exist: %{path}"
|
|
missing_shared_folders: |-
|
|
Shared folders that Puppet requires are missing on the virtual machine.
|
|
This is usually due to configuration changing after already booting the
|
|
machine. The fix is to run a `vagrant reload` so that the proper shared
|
|
folders will be prepared and mounted on the VM.
|
|
module_path_missing: "The configured module path doesn't exist: %{path}"
|
|
|
|
puppet_server:
|
|
not_detected: |-
|
|
The `%{binary}` binary appears to not be in the PATH of the guest. This
|
|
could be because the PATH is not properly setup or perhaps Puppet is not
|
|
installed on this guest. Puppet provisioning can not continue without
|
|
Puppet properly installed.
|
|
running_puppetd: "Running Puppet agent..."
|
|
|
|
shell:
|
|
args_not_string: "Shell provisioner `args` must be a string."
|
|
no_path_or_inline: "One of `path` or `inline` must be set."
|
|
path_and_inline_set: "Only one of `path` or `inline` may be set."
|
|
path_invalid: "`path` for shell provisioner does not exist on the host system: %{path}"
|
|
running: "Running: %{script}"
|
|
upload_path_not_set: "`upload_path` must be set for the shell provisioner."
|
|
|
|
ansible:
|
|
no_playbook: "`playbook` must be set for the Ansible provisioner."
|
|
playbook_path_invalid: "`playbook` for the Ansible provisioner does not exist on the host system: %{path}"
|
|
inventory_file_path_invalid: "`inventory_file` for the Ansible provisioner does not exist on the host system: %{path}"
|
|
extra_vars_not_hash: "`extra_vars` for the Ansible provisioner must be a hash"
|