misc-deps
/
racket-ansi
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
racket-ansi/doc/xterm_controls.txt

1841 lines
70 KiB
Plaintext
Raw Permalink Normal View History

xterm_controls.txt, as referenced in all-escapes.txt
2014-12-15 21:08:38 +00:00
Controlling "xterm" emulations
(and similar software under X: decterm, hpterm, dtterm, etc.)
The "xterm" application, which runs in the graphical X Windows
environment and emulates a character-cell terminal.
*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*
Date: 12 Sep 1989 17:44:43 GMT
Organization: GE Corporate Research & Development, Schenectady, NY
To: xpert@expo.lcs.mit.edu
From: crdgw1!montnaro@uunet.uu.net (Skip Montanaro)
Subject: XTerm Escape Sequences (X11 Version)
I rummaged around through the xterm code and came up with the following
stuff. No guarantees. I'm headed out of town for a couple days and thought
it better to get it out than let it get stale. Comments, bugs, and other
notes are welcome. Somebody else can convert it to troff. I prefer LaTeX.
:-) I will try and get to the Tek mode stuff when I return, although I doubt
it's changed much from X10 XTerm.
I gleaned the basic stuff out of the charproc.c code, by hacking VTparse()
so it spit out leaves of the parse tree. I was mildly surprised to see
things like "ESC # BEL" turn up.
For most folks, the most interesting stuff will probably be "ESC ] Ps ND
string NP" down near the bottom. That's what you use to change the icon and
window labels, and the log file name. Most other things appear the same as
the X10 documentation, although a few DEC-ish mode parameters (42, 43, 48, &
49) seem to have disappeared.
------------------------------------------------------------------------------
BEL Bell (Ctrl-G)
BS Backspace (Ctrl-H)
HT Horizontal Tab (Ctrl-I)
NL Line Feed or New Line (Ctrl-J)
VT Vertical Tab (Ctrl-K)
NP Form Feed or New Page (Ctrl-L)
CR Carriage Return (Ctrl-M)
SO Shift Out (Ctrl-N) -> Switch to Alternate Character Set
SI Shift In (Ctrl-O) -> Switch to Standard Character Set
ESC BEL (Same as non-escaped BEL)
ESC BS (Same as non-escaped BS)
ESC HT (Same as non-escaped HT)
ESC NL (Same as non-escaped NL)
ESC VT (Same as non-escaped VT)
ESC NP (Same as non-escaped NP)
ESC CR (Same as non-escaped CR)
ESC SO (Same as non-escaped SO)
ESC SI (Same as non-escaped SI)
ESC # BEL (Same as non-escaped BEL)
ESC # BS (Same as non-escaped BS)
ESC # HT (Same as non-escaped HT)
ESC # NL (Same as non-escaped NL)
ESC # VT (Same as non-escaped VT)
ESC # NP (Same as non-escaped NP)
ESC # CR (Same as non-escaped CR)
ESC # SO (Same as non-escaped SO)
ESC # SI (Same as non-escaped SI)
ESC # 8 DEC Screen Alignment Test (DECALN)
ESC ( BEL (Same as non-escaped BEL)
ESC ( BS (Same as non-escaped BS)
ESC ( HT (Same as non-escaped HT)
ESC ( NL (Same as non-escaped NL)
ESC ( VT (Same as non-escaped VT)
ESC ( NP (Same as non-escaped NP)
ESC ( CR (Same as non-escaped CR)
ESC ( SO (Same as non-escaped SO)
ESC ( SI (Same as non-escaped SI)
ESC ( C Select G0 Character Set (SCS)
C = 0 -> Special Character and Line Drawing Set
C = 1 -> Alternate Character ROM Standard Set
C = 2 -> Alternate Character ROM Special Set
C = A -> United Kingdom (UK)
C = B -> United States (USASCII)
ESC ) C Select G1 Character Set (SCS)
C takes same values as above
ESC * C Select G2 Character Set (SCS)
C takes same values as above
ESC + C Select G3 Character Set (SCS)
C takes same values as above
ESC 7 Save Cursor (DECSC)
ESC 8 Restore Cursor (DECRC)
ESC = Application Keypad (DECPAM)
ESC > Normal Keypad (DECNM)
ESC D Index (IND)
ESC E Next Line (NEL)
ESC H Tab Set (HTS)
ESC M Reverse Index (RI)
ESC N Single Shift Select of G2 Character Set (SS2)
ESC O Single Shift Select of G3 Character Set (SS3)
ESC [ BEL (Same as non-escaped BEL)
ESC [ BS (Same as non-escaped BS)
ESC [ HT (Same as non-escaped HT)
ESC [ NL (Same as non-escaped NL)
ESC [ VT (Same as non-escaped VT)
ESC [ NP (Same as non-escaped NP)
ESC [ CR (Same as non-escaped CR)
ESC [ SO (Same as non-escaped SO)
ESC [ SI (Same as non-escaped SI)
ESC [ ? BEL (Same as non-escaped BEL)
ESC [ ? BS (Same as non-escaped BS)
ESC [ ? HT (Same as non-escaped HT)
ESC [ ? NL (Same as non-escaped NL)
ESC [ ? VT (Same as non-escaped VT)
ESC [ ? NP (Same as non-escaped NP)
ESC [ ? CR (Same as non-escaped CR)
ESC [ ? SO (Same as non-escaped SO)
ESC [ ? SI (Same as non-escaped SI)
ESC [ ? Ps h DEC Private Mode Set (DECSET)
Ps = 1 -> Application Cursor Keys (DECCKM)
Ps = 2 -> Set VT52 Mode
Ps = 3 -> 132 Column Mode (DECCOLM)
Ps = 4 -> Smooth (Slow) Scroll (DECSCLM)
Ps = 5 -> Reverse Video (DECSCNM)
Ps = 6 -> Origin Mode (DECOM)
Ps = 7 -> Wraparound Mode (DECAWM)
Ps = 8 -> Auto-Repeat Keys (DECARM)
Ps = 9 -> Send MIT Mouse Row & Column on Button
Press
Ps = 38 -> Enter Tektronix Mode (DECTEK)
Ps = 40 -> Allow 80 <-> 132 Mode
Ps = 41 -> curses(5) fix
Ps = 44 -> Turn on Margin Bell
Ps = 45 -> Reverse-wraparound Mode
Ps = 46 -> Start Logging
Ps = 47 -> Use Alternate Screen Buffer
Ps = 1000 -> xtem bogus sequence (???)
Ps = 1001 -> xtem sequence w/hilite tracking (???)
ESC [ ? Ps l DEC Private Mode Reset (DECRST)
Ps = 1 -> Normal Cursor Keys (DECCKM)
Ps = 3 -> 80 Column Mode (DECCOLM)
Ps = 4 -> Jump (Fast) Scroll (DECSCLM)
Ps = 5 -> Normal Video (DECSCNM)
Ps = 6 -> Normal Cursor Mode (DECOM)
Ps = 7 -> No Wraparound Mode (DECAWM)
Ps = 8 -> No Auto-Repeat Keys (DECARM)
Ps = 9 -> Don't Send MIT Mouse Row & Column on
Button Press
Ps = 40 -> Don't Allow 80 <-> 132 Mode
Ps = 41 -> No curses(5) fix
Ps = 44 -> Turn Off Margin Bell
Ps = 45 -> No Reverse-wraparound Mode
Ps = 46 -> Stop Logging
Ps = 47 -> Use Normal Screen Buffer
Ps = 1000 -> xtem bogus sequence (???)
Ps = 1001 -> xtem sequence w/hilite tracking (???)
ESC [ ? Ps r Restore DEC Private Mode
Ps = 1 -> Normal/Application Cursor Keys (DECCKM)
Ps = 3 -> 80/132 Column Mode (DECCOLM)
Ps = 4 -> Jump (Fast)/Smooth (Slow) Scroll (DECSCLM)
Ps = 5 -> Normal/Reverse Video (DECSCNM)
Ps = 6 -> Normal/Origin Cursor Mode (DECOM)
Ps = 7 -> No Wraparound/Wraparound Mode (DECAWM)
Ps = 8 -> Auto-repeat/No Auto-repeat Keys (DECARM)
Ps = 9 -> Don't Send/Send MIT Mouse Row & Column on
Button Press
Ps = 40 -> Disallow/Allow 80 <-> 132 Mode
Ps = 41 -> Off/On curses(5) fix
Ps = 44 -> Turn Off/On Margin Bell
Ps = 45 -> No Reverse-wraparound/Reverse-wraparound
Mode
Ps = 46 -> Stop/Start Logging
Ps = 47 -> Use Normal/Alternate Screen Buffer
Ps = 1000 -> mouse bogus sequence (???)
Ps = 1001 -> mouse bogus sequence (???)
ESC [ ? Ps s Save DEC Private Mode
Same P's as Restore DEC Private Mode
ESC [ Ps @ Insert Ps (Blank) Character(s) (default = 1) (ICH)
ESC [ Ps A Cursor Up Ps Times (default = 1) (CUU)
ESC [ Ps B Cursor Down Ps Times (default = 1) (CUD)
ESC [ Ps C Cursor Forward Ps Times (default = 1) (CUF)
ESC [ Ps D Cursor Backward Ps Times (default = 1) (CUB)
ESC [ Ps ; Ps H Cursor Position [row;column] (default = [1,1]) (CUP)
ESC [ Ps J Erase in Display
Ps = 0 -> Clear Below (default)
Ps = 1 -> Clear Above
Ps = 2 -> Clear All
ESC [ Ps K Erase in Line
Ps = 0 -> Clear to Right (default)
Ps = 1 -> Clear to Left
Ps = 2 -> Clear All
ESC [ Ps L Insert Ps lines (default = 1) (IL)
ESC [ Ps M Delete Ps lines (default = 1) (DL)
ESC [ Ps P Delete Ps Characters (default = 1) (DCH)
ESC [ T Track Mouse (???)
ESC [ Ps c Device Attributes (DA1)
ESC [ Ps ; Ps f Cursor Position [row;column] (default = [1,1]) (HVP)
ESC [ Ps g Tab Clear
Ps = 0 -> Clear Current Column (default)
Ps = 3 -> Clear All
ESC [ Ps h Mode Set (SET)
Ps = 4 -> Insert Mode (IRM)
Ps = 20 -> Automatic Linefeed (LNM)
ESC [ Ps l Mode Reset (RST)
Ps = 4 -> Insert Mode (IRM)
Ps = 20 -> Automatic Linefeed (LNM)
ESC [ Pm m Character Attributes (SGR)
Ps = 0 -> Normal (default)
Ps = 1 -> Blink (appears as Bold)
Ps = 4 -> Underscore
Ps = 5 -> Bold
Ps = 7 -> Inverse
ESC [ Ps n Device Status Report (DSR)
Ps = 5 -> Status Report ESC [ 0 n -> OK
Ps = 6 -> Report Cursor Position (CPR) [row;column]
as ESC [ r ; c R
ESC [ Ps ; Ps r Set Scrolling Region [top;bottom] (default = full size
of window) (DECSTBM)
ESC [ Ps x Request Terminal Parameters (DECREQTPARM)
ESC ] Ps ND string NP OSC Mode
ND can be any non-digit Character (it's discarded)
NP can be any non-printing Character (it's discarded)
string can be any ASCII printable string
(max 511 characters)
Ps = 0 -> use string as a new icon name and title
Ps = 1 -> use string is a new icon name only
Ps = 2 -> use string is a new title only
Ps = 46 -> use string as a new log file name
ESC c Full Reset
ESC n Switch to Alternate Character Set LS2
ESC o Switch to Alternate Character Set LS3
ESC | Switch to Alternate Graphics(?) Set LS3R
ESC } Switch to Alternate Graphics(?) Set LS2R
ESC ~ Switch to Alternate Graphics(?) Set LS1R
--
Skip Montanaro (montanaro@crdgw1.ge.com)
*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*
Newsgroups: comp.terminals
Path: cs.utk.edu!emory!swrinde!zaphod.mps.ohio-state.edu!howland.reston.ans.net
!spool.mu.edu!hri.com!noc.near.net!news.bbn.com!bbn.com!pdsmith
Message-ID: <lmimq1INNgd6@news.bbn.com>
References: <1993Jan28.010333.2187@spang.Camosun.BC.CA>
Date: 29 Jan 1993 16:28:49 GMT
From: pdsmith@bbn.com (Peter D. Smith)
Subject: Re: Can you identify this escape sequence?
Summary: DECELR and DECSLE
In article <1993Jan28.010333.2187@spang.Camosun.BC.CA>,
morley@suncad.camosun.bc.ca (Mark Morley) writes:
>
> The escape sequence is <ESC>[1;1'z
> or <ESC>[1;1'{
Sure -- looking it up in my Escape sequence reverse index, I find
...z is DECELR: Enable locator report. It's only used by DECTERM;
see the Decterm programming release notes (EK-DTERM-RN-001)
page 3-1. The first one means 'enable' and the second
one means 'report in pixels'.
The 'locator' is the mouse.
...{ is DECSLE: Select type of locator events, same book, page 3-5.
It's not clear why there are two parameters; this
sequence doesn't attach any positional significance
on parameters (eg, a one means the same thing no matter
where it is). One means "Report button down".
Peter D. Smith
*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*
Newsgroups: comp.os.vms
Path: cs.utk.edu!emory!wupost!uunet!pipex!sunic!ugle.unit.no!alf.uib.no
!dsfys1.fi.uib.no!iversen
From: iversen@dsfys1.fi.uib.no (Per Steinar Iversen)
Subject: RE: <ESC>]VMS;2<ESC>\ sequence in Device Control Reset Modules
Message-ID: <1993Mar4.071327.17421@alf.uib.no>
Sender: iversen@vsfys1.fi.uib.no (Per Steinar Iversen)
Organization: Department of Physics, University of Bergen, Norway
References: <9303031720.AA28424@uu3.psi.com>
Date: Thu, 4 Mar 1993 07:13:27 GMT
In article <9303031720.AA28424@uu3.psi.com>,
Jerry Leichter <leichter@lrw.com> writes:
>
>OSC sequences have been used by the UIS terminal emulators to provide a means
>for a program to control things like window sizes and positions through the
>data stream; the DECWindows terminal emulator inherited them. A few OSC
>sequences have been used in the standard print symbiont as well. I KNOW I
>found the documentation for them once, but a search through the VMS docs just
>now revealed nothing. I do recall that the OSC sequences didn't do much that
>was very interesting. If anyone can find where this stuff is described, I'd
>be interested.
The UIS OSC sequences are documented in the VWS User's Guide, "Additional
Features of the VT220 Terminal Emulator". I have found the related "Control
Sequence Introducer Strings" useful to set terminal window sizes, if one logs
in on a remote node through DECnet or TELNET, then a terminal resize with
SET TERM does not propagate back to my DECwindows window. By having a command
file on the remote node one can fix this:
$! BIG.COM
$ set term/page=60/width=132
$ write sys$output "<ESC>[?3h<ESC>[60t<ESC>>"
(Subsitute real <ESC>s with an editor.)
It would be nice though if DEC would document DECterm better...
+-----------------------------------------------------------------------------+
! Per Steinar Iversen ! Internet: iversen@vsfys1.fi.uib.no !
! Fysisk Institutt ! BITnet: iversen@cernvm.bitnet !
! Universitetet i Bergen ! HEPnet: VSFYS::IVERSEN (VSFYS=21.341=21845) !
! Allegaten 55 ! Phone: +47 5212770 !
! N-5007 Bergen ! Fax: +47 5318334 !
! NORWAY ! !
+-----------------------------------------------------------------------------+
*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*
From the HP-UX FAQ:
Subject: 6.3 How do I get a scroll bar on hpterms?
Set the following resources:
HPterm*scrollBar: TRUE
HPterm*saveLines: 1024
or some other other arbitrarily large number. To do this interactively, use
"hpterm -sb -sl 1024". You can also set these in an app-default file
(/usr/lib/X11/app-defaults/HPterm). You can also set saveLines to something
like "4s", which indicates four screens.
If you want the VUE panel terminal icon produce hpterm's that have
scroll bars, and also have their login shell run at the startup of
the terminal. To do this you have to modify the default action of the
VUE panel. The easiest way to do this on a system-wide basis is
to edit the "/usr/vue/types/xclients.vf" file. Change the line that says
"hpterm" to "hpterm -ls -sb -sl 400":
/usr/vue/types/xclients.vf
ACTION Hpterm
TYPE COMMAND
WINDOW-TYPE NO-STDIO
EXEC-STRING hpterm -ls -sb -sl 400
DESCRIPTION The Hpterm action starts an hpterm terminal
emulator.
END
(Thanks to Greg Cagle <gcagle@hpupora.nsr.hp.com> and
John Kemp <JohnKemp@uiuc.edu> )
......... ......... ......... ......... ......... ......... ......... .......
The HP-UX Frequently Asked Questions compilation, which includes several
other 'hpterm' items, can be read in its entirety from this URL:
http://www.cis.ohio-state.edu/hypertext/faq/usenet/hp/top.html
*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*---*
//////////////////////////////////////////////////////////////////////////////
From charlesp@darwin.sfbr.org Sat Feb 20 23:32:53 1999
Date: Fri, 19 Feb 1999 00:30:05 GMT
From: charlesp@darwin.sfbr.org
Subject: Re: Emacs in a dtterm under 2.6 CDE
In article <7a1f2i$j3c$2@callisto.clark.net>,
"T.E.Dickey" <dickey@shell.clark.net> wrote:
> charlesp@darwin.sfbr.org wrote:
> > Recently I was forced to switch from Openwindows to CDE under Solaris 2.6
> > which features dtterm terminal windows.
>
> > I like to run emacs inside my terminal windows (I can C-Z to flop back from
> > "real" shell to emacs without reaching for a mouse). But this CDE dtterm
> > appears to be broken. It works for a while, but certain cursor motions
> > (particularly going backward from the bottom of a window) screw up the
> > display so I end up typing C-l all the time. When the display is hosed,
> > one symptom is that the reverse video lines near the bottom and in the
> > middle (if you have multiple windows) go away and are replaced by some of
> > the text you are editing.
>
> simple fix: remove the scrolling capabilities from the dtterm description
> hard fix: get the vendor to correct the bug.
>
I've tried both disabling the scroll bar and both positions of the "jump
scroll" option. I also tried "kshMode." Nothing solved the problem.
dtterm is BROKEN.
Besides, I like scrolling. I'm now using cmdtools (which I didn't even know
were available under CDE, but they are, at least in 2.6) and they work
perfectly. The version of xterm in 2.6 also works fine, but I haven't
figured out how to get xterms to work so that when I exit out of emacs (or
vi). I see the previous terminal history, not just the editing session
paritally scrolled off screen. It is very useful to see the previous terminal
history. (dtterm doesn't do this the way I want either). cmdtool does
everything the way I want by default.
ter fix (imho):
> The XFree86 3.3.3 xterm supports ANSI color and VT220 emulation
> There's an faq at
> [STALE URL]
> http://www.clark.net/pub/dickey/xterm/xterm.faq.html
> ftp://ftp.clark.net/pub/dickey/xterm
[URL functional in 2009]
http://invisible-island.net/xterm/xterm.faq.html
> --
> Thomas E. Dickey
> dickey@clark.net
> http://www.clark.net/pub/dickey
>
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals
Date: 19 Feb 1999 17:11:38 GMT
From: T.E.Dickey <dickey@shell.clark.net>
Subject: Re: Emacs in a dtterm under 2.6 CDE
charlesp@darwin.sfbr.org wrote:
...
>> simple fix: remove the scrolling capabilities from the dtterm description
>> hard fix: get the vendor to correct the bug.
> I've tried both disabling the scroll bar and both positions of the "jump
> scroll" option. I also tried "kshMode." Nothing solved the problem.
the scrollbar has nothing to do with it. run
infocmp dtterm >foo
and remove the 'csr', 'ind', 'ri' strings. recompile with tic.
> dtterm is BROKEN.
that appears correct.
> Besides, I like scrolling. I'm now using cmdtools (which I didn't even know
> were available under CDE, but they are, at least in 2.6) and they work
> perfectly. The version of xterm in 2.6 also works fine, but I haven't
> figured out how to get xterms to work so that when I exit out of emacs (or
> vi) I see the previous terminal history, not just the editing session
> paritally scrolled off screen. It is very useful to see the previous terminal
> history. (dtterm doesn't do this the way I want either). cmdtool does
dtterm doesn't do it at all. you are describing the alternate screen feature
of xterm (half of the users dislike it, half like it). still - in my faq.
--
Thomas E. Dickey
dickey@clark.net
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.unix.aix,comp.windows.x
Message-ID: <6pouaa$20p$1@usenet50.supernews.com>
Date: Thu, 30 Jul 1998 00:51:05 -0400
From: "M. Kovarski" <markk@openetix.com>
Subject: CATIA on X-Terminal
Anyone here using CATIA on an X-Terminal? If so, which on. We tried the IBM
Network Station 1000 and it does not seem to work. The colors are funny. I
think it is because the Netstation has only 256 colors!?!?
The server which runs the CATIA is an F50 with an GXT800P running in OpenGL
mode. I have not tried Pex/Phigs yet. CATIA uses 16 Million colors as far as
I can tell.
Any other 24-Bit color X-Terminals out there by other companies? Any
recommendations or warnings?
CATIA is a strange app since it uses some weird colormap scheme. I get
exactly the same problem when running CATIA on Hummingbird, WRQs and others.
The colors are weird. Hummingbird came to the conclusion that catia uses 4
or so colormaps and the PC can handle on 2. Anyone any ideas?
Thanks and best regards,
Mark K.
markk@openetix.com
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.unix.aix,comp.windows.x
Message-ID: <35C13398.67AB81A6@ma.ultranet.com>
References: <6pouaa$20p$1@usenet50.supernews.com>
<35C13462.E55D6291@ma.ultranet.com>
Date: Thu, 30 Jul 1998 23:01:44 -0400
From: Chuck Kuhlman <ckuhlman@ma.ultranet.com>
Subject: Re: CATIA on X-Terminal
inadviseable
you'll get ...poor performance and network saturation. If you can
even get it to work at all.
Best to stay with the explicit hardware configs set up for you at the
Dassault/IBM CASIL web site and NOT cheap out on sub-standard kludges.
CATIA belongs to Dassault Aerospace (France) who have a very close
relationship with IBM to run CATIA on RS/6000 and OS/390.
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.unix.solaris
References: <374149b0.9183139@news.esat.net>
<wtzyaimwpid.fsf@wurzelausix.cs.uni-sb.de> <1riu9q7byu.fsf@haey.ifi.uio.no>
<7hu486$j6i$1@ash.prod.itd.earthlink.net> <1rn1z15fxn.fsf@haey.ifi.uio.no>
<7i5bsg$ulv$1@nnrp1.deja.com>
Message-ID: <3Ky13.621$Rl3.23904@ord-read.news.verio.net>
Date: Sat, 22 May 1999 13:58:23 GMT
NNTP-Posting-Host: 168.143.0.8
From: "T.E.Dickey" <dickey@shell.clark.net>
Subject: Re: Colour Xterm?
olefevre@my-dejanews.com wrote:
> Kjetil Torgrim Homme <kjetilho@haey.ifi.uio.no> wrote:
> Also, xterm compiled in a snap on this Solaris 2.5.1 system and all
> tests in xterm-103/vttests seem to work. However, I'm not getting any
> color with, e.g., man. I set XTerm*customization in ~/.Xdefaults to
'man' doesn't do color in any version I've seen. You can setup XFree86
xterm to apply specified colors to bold and underlined text.
> -color and my XUSERetc starts with the path to XTerm-color file yet
> truss tells me it is not read (Xterm is, though). Why? Anyway, even
If you have
*customization: color
in your .Xdefaults, it should read the XTerm-color file _if_ app-defaults
aren't overridden by xrdb or some environment variable such as XENVIRONMENT
or XAPPLRESDIR.
> instructions in my XTerm seem ignored because, e.g., I can change the
> cursor color in .Xdefaults but not in XTerm. But then even setting
> XTerm*VT100*colorMode to on in .Xdefaults does not get me color.
> At this point I'm giving up. Can someone tell me what is wrong and how
> to get color at last?
> Thanks a lot,
> -- O.L.
--
Thomas E. Dickey
dickey@clark.net
http://invisible-island.net/
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
Path: !cambridge1-snf1.gtei.net!news.gtei.net!bos-service1.ext.raytheon.com
!cyclone.swbell.net!newsfeed.berkeley.edu!newsfeed.nyu.edu
!wesley.videotron.net!wagner.videotron.net.POSTED!ocurtin
NNTP-Posting-Host: 24.200.125.165
Organization: The Minetown Digger
Reply-To: ocurtin@NOSPAM.usa.net
Message-ID: <slrn8c06up.tai.ocurtin@jarod.oc>
Date: Fri, 3 Mar 2000 15:08:59 -0500
From: ocurtin@usa.net (Curly++)
Subject: Escape sequences for xterm?
I think what I need is a listing of xterm escape codes. All the
listings I've found are horribly out of date.
I've done a few extensive web crawls but haven't been able to
find anything up-to-date except the source code... yeah, I know,
but it's self-documenting!
Maybe I'm going about this all wrong, so let me tell you what I'm
doing, you can tell me if I'm stupidly ignoring an obvious and
simple solution.
I'm fiddling with the source for xterm. I need to monitor the
user's interaction with some applications so as to divert some
of the inputs to another app. Legacy stuff, this is a kludge
to bridge the old and the new until the old can be fully phased
out. I'm writing scripts with `expect` to wait for the user
to fill in a form, then take an image of the screen and pass it
to another app. I can't capture the data coming back, the
screen is updated in tiny bits sort-of like what curses does.
I've added an escape sequence to xterm so the expect script can
be triggered by the few predictable strings and use `send_user`
to trigger a screen dump to an external file. I'd like to use a
"correct" sequence and submit this as a patch to the xterm
maintainer. This seems to me a general solution to a set of
problems that turn up occassionaly.
--
Oisin "Curly++" Curtin ocurtin@SPAM.usa.net
Surface Liaison, Minetown Digger Send no SPAM.
http://pages.infinit.net/curlypp/
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
Organization: [posted via] Leibniz-Rechenzentrum, Muenchen (Germany)
Message-ID: <slrn8c0cuj.f5a.m.ramsch@galadriel.forwiss.uni-passau.de>
References: <slrn8c06up.tai.ocurtin@jarod.oc>
Date: 3 Mar 2000 22:51:21 +0100
From: m.ramsch@computer.org (Martin Ramsch)
Subject: Re: Escape sequences for xterm?
On Fri, 3 Mar 2000 15:08:59 -0500,
Oisin "Curly++" Curtin <ocurtin@NOSPAM.usa.net> wrote:
> I think what I need is a listing of xterm escape codes. All the
> listings I've found are horribly out of date.
Did you also have a look at the file "ctlseqs.ms" which is part of
every xterm packages?
To convert this file into other formats use for example
groff -ms -t -Tps ctlseqs.ms >ctlseqs.ps for Postscript output
groff -ms -t -Tlj4 ctlseqs.ms >ctlseqs.lj4 for LaserJet 4 print file
groff -ms -t -Tdvi ctlseqs.ms >ctlseqs.dvi for TeX dvi output
groff -ms -t -Tlatin1 ctlseqs.ms >ctlseqs.txt for text output
Regards,
Martin
--
Martin Ramsch <m.ramsch@computer.org> <URL: http://home.pages.de/~ramsch/ >
PGP KeyID=0xE8EF4F75 FiPr=5244 5EF3 B0B1 3826 E4EC 8058 7B31 3AD7
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<slrn8c0cuj.f5a.m.ramsch@galadriel.forwiss.uni-passau.de>
Organization: Clark Internet Services, Inc., Ellicott City, MD USA
User-Agent: tin/1.5.2-20000119 ("Sumerland") (UNIX) (SunOS/5.6 (sun4u))
Message-ID: <kA6w4.240$G15.4993@iad-read.news.verio.net>
Date: Sat, 04 Mar 2000 11:37:52 GMT
From: "T.E.Dickey" <dickey@shell.clark.net>
Subject: Re: Escape sequences for xterm?
Martin Ramsch <m.ramsch@computer.org> wrote:
> On Fri, 3 Mar 2000 15:08:59 -0500,
> Oisin "Curly++" Curtin <ocurtin@NOSPAM.usa.net> wrote:
>> I think what I need is a listing of xterm escape codes. All the
>> listings I've found are horribly out of date.
> Did you also have a look at the file "ctlseqs.ms" which is part of
> every xterm packages?
Technically, ctlseqs.ms was moved to the doc directory tree some time
ago - depending on how you get xterm, you may not see it - I bundle it
in my xterm tarballs for convenience.
The XFree86 xterm supports ANSI color and VT220 emulation
There's an faq at
[STALE URL]
http://www.clark.net/pub/dickey/xterm/xterm.faq.html
ftp://ftp.clark.net/pub/dickey/xterm
[2009 URL]
http://invisible-island.net/xterm/xterm.faq.html
(altavista usually shows my webpage - though I don't search for that ;-)
[Altavista was popular before Google saturated the search function.]
--
Thomas E. Dickey
dickey@clark.net
http://www.clark.net/pub/dickey
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
References: <slrn8c06up.tai.ocurtin@jarod.oc>
Message-ID: <pe9w4.255$G15.5963@iad-read.news.verio.net>
Date: Sat, 04 Mar 2000 14:39:17 GMT
NNTP-Posting-Date: Sat, 04 Mar 2000 14:39:17 GMT
From: "T.E.Dickey" <dickey@shell.clark.net>
Subject: Re: Escape sequences for xterm?
Curly++ <ocurtin@nospam.usa.net> wrote:
>
> I've added an escape sequence to xterm so the expect script can
> be triggered by the few predictable strings and use `send_user`
> to trigger a screen dump to an external file. I'd like to use a
> "correct" sequence and submit this as a patch to the xterm
> maintainer. This seems to me a general solution to a set of
> problems that turn up occassionaly.
While it's useful, this is generally frowned upon as a security problem.
I don't think it'll get much general acceptance.
--
Thomas E. Dickey
dickey@clark.net
http://www.clark.net/pub/dickey
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<pe9w4.255$G15.5963@iad-read.news.verio.net>
NNTP-Posting-Host: modem-88-4-60-62.vip.uk.com
Message-ID: <38C15701.7CF1A007@tinyworld.co.uk>
Date: Sat, 04 Mar 2000 18:33:37 +0000
From: Paul Williams <celigne@tinyworld.co.uk>
Subject: Re: Escape sequences for xterm?
"T.E.Dickey" wrote:
>
> Curly++ <ocurtin@nospam.usa.net> wrote:
>
> > I've added an escape sequence to xterm so the expect script can
> > be triggered by the few predictable strings and use `send_user`
> > to trigger a screen dump to an external file. I'd like to use a
> > "correct" sequence and submit this as a patch to the xterm
> > maintainer. This seems to me a general solution to a set of
> > problems that turn up occassionaly.
>
> While it's useful, this is generally frowned upon as a security problem.
> I don't think it'll get much general acceptance.
It is possible for a host computer to grab the contents of the screen
of a Digital VT420. Howeve, xterm doesn't emulate a VT420 (yet?)
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<slrn8c0cuj.f5a.m.ramsch@galadriel.forwiss.uni-passau.de>
Organization: The Minetown Digger
Message-ID: <slrn8c5h21.4o6.ocurtin@jarod.oc>
Date: Sun, 5 Mar 2000 15:32:03 -0500
From: ocurtin@NOSPAM.usa.net (Curly++)
Subject: Re: Escape sequences for xterm?
On 3 Mar 2000 22:51:21 +0100, Martin Ramsch <m.ramsch@computer.org> wrote:
>
> On Fri, 3 Mar 2000 15:08:59 -0500,
> Oisin "Curly++" Curtin <ocurtin@NOSPAM.usa.net> wrote:
> > I think what I need is a listing of xterm escape codes. All the
> > listings I've found are horribly out of date.
>
> Did you also have a look at the file "ctlseqs.ms" which is part of
> groff -ms -t -Tlatin1 ctlseqs.ms >ctlseqs.txt for text output
Ah! Thanks, Martin. That's the answer all right!
I'm not a gruff person, er, I mean I'm not a groff person so the
.ms didn't mean anthing to me. I'll suggest that your answer be
added to the FAQ for all us ignoramuses. :-)
--
Oisin "Curly++" Curtin ocurtin@SPAM.usa.net
Surface Liaison, Minetown Digger Send no SPAM.
http://pages.infinit.net/curlypp/
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
From: ocurtin@NOSPAM.usa.net (Curly++)
Subject: Re: Escape sequences for xterm?
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<slrn8c0cuj.f5a.m.ramsch@galadriel.forwiss.uni-passau.de>
<kA6w4.240$G15.4993@iad-read.news.verio.net>
Organization: The Minetown Digger
Message-ID: <slrn8c5hge.4o6.ocurtin@jarod.oc>
Date: Sun, 5 Mar 2000 15:39:42 -0500
On Sat, 04 Mar 2000 11:37:52 GMT, T.E.Dickey <dickey@shell.clark.net> wrote:
> Martin Ramsch <m.ramsch@computer.org> wrote:
> > On Fri, 3 Mar 2000 15:08:59 -0500,
> > Oisin "Curly++" Curtin <ocurtin@NOSPAM.usa.net> wrote:
> >> I think what I need is a listing of xterm escape codes. All the
> >> listings I've found are horribly out of date.
>
> > Did you also have a look at the file "ctlseqs.ms" which is part of
> > every xterm packages?
>
> Technically, ctlseqs.ms was moved to the doc directory tree some time
> ago - depending on how you get xterm, you may not see it - I bundle it
I must have an old copy then.
AFAIK, I did check the lastest FAQ at clark. Can MR's reply be
added so "us unwashed masses" can cut'n'paste the right command
to see it? TIA, either way.
--
Oisin "Curly++" Curtin ocurtin@SPAM.usa.net
Surface Liaison, Minetown Digger Send no SPAM.
http://pages.infinit.net/curlypp/
Newsgroups: comp.terminals,comp.os.linux.admin
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<pe9w4.255$G15.5963@iad-read.news.verio.net>
Organization: The Minetown Digger
NNTP-Posting-Host: 24.200.125.165
Message-ID: <slrn8c5jik.4o6.ocurtin@jarod.oc>
Date: Sun, 5 Mar 2000 16:15:02 -0500
From: ocurtin@usa.net (Curly++)
Subject: Re: Escape sequences for xterm?
On Sat, 04 Mar 2000 14:39:17 GMT, T.E.Dickey <dickey@shell.clark.net> wrote:
> Curly++ <ocurtin@nospam.usa.net> wrote:
>
> > I've added an escape sequence to xterm so the expect script can
> > be triggered by the few predictable strings and use `send_user`
> > to trigger a screen dump to an external file. I'd like to use a
> > "correct" sequence and submit this as a patch to the xterm
> > maintainer. This seems to me a general solution to a set of
> > problems that turn up occassionaly.
>
> While it's useful, this is generally frowned upon as a security problem.
> I don't think it'll get much general acceptance.
DISCLAIMER: I'm not a security expert and I don't play one on TV.
You're referring to the log problem? I haven't read all about
it, but I gather it's not logging per se, but the fact that the
destination file is uncontrolled that causes a problem.
I plan to make screen-scraping secure by allowing the user only
limited control of the destination filename and ignoring the
request if the file already exists. That means the screen-scrape
will never, for example, add a line to ~/.profile. This forces
the external script to delete files, but then the script needs
much less logic to read the image that way.
I'm not sure, but I think the solution to the logging problem is
similar: restrict the name and location of the file to something
less than anywhere/anything and use more elaborate fstat code in
place of the access tests. Maybe even put a magic cookie at the
top of new logs and never append to an existing log if it doesn't
have a cookie on top. A cookie is a lot of extra code though, I
wouldn't do it unless the real security experts say it's needed.
BTW, I have to add this...
My partner is not used to seeing me grinning from ear to ear and
muttering under my breath "Wow! That's neat!" and similar things.
This code is an absolute _pleasure_ to work with.
--
Oisin "Curly++" Curtin ocurtin@SPAM.usa.net
Surface Liaison, Minetown Digger Send no SPAM.
http://pages.infinit.net/curlypp/
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<pe9w4.255$G15.5963@iad-read.news.verio.net>
<38C15701.7CF1A007@tinyworld.co.uk>
Organization: The Minetown Digger
Reply-To: ocurtin@NOSPAM.usa.net
User-Agent: slrn/0.9.5.4 (UNIX)
Lines: 15
Date: Sun, 5 Mar 2000 16:32:52 -0500
From: ocurtin@NOSPAM.usa.net (Curly++)
Subject: Re: Escape sequences for xterm?
On 04 Mar 2000, Paul Williams <celigne@tinyworld.co.uk> wrote:
> It is possible for a host computer to grab the contents of the screen
> of a Digital VT420. Howeve, xterm doesn't emulate a VT420 (yet?)
But doesn't that go back to the remote application? I think
`expect` could divert the output, but having dealt with timing
issues before, I feel more comfortable if the data *cannot*
go out the wrong way no matter how hard it tries.
--
Oisin "Curly++" Curtin ocurtin@SPAM.usa.net
Surface Liaison, Minetown Digger Send no SPAM.
http://pages.infinit.net/curlypp/
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<slrn8c0cuj.f5a.m.ramsch@galadriel.forwiss.uni-passau.de>
<kA6w4.240$G15.4993@iad-read.news.verio.net>
<slrn8c5hge.4o6.ocurtin@jarod.oc>
Organization: Clark Internet Services, Inc., Ellicott City, MD USA
Message-ID: <FtCw4.493$G15.14581@iad-read.news.verio.net>
Date: Sun, 05 Mar 2000 23:55:17 GMT
From: "T.E.Dickey" <dickey@shell.clark.net>
Subject: Re: Escape sequences for xterm?
Curly++ <ocurtin@nospam.usa.net> wrote:
>> Technically, ctlseqs.ms was moved to the doc directory tree some time
>> ago - depending on how you get xterm, you may not see it - I bundle it
> I must have an old copy then.
> AFAIK, I did check the lastest FAQ at clark. Can MR's reply be
> added so "us unwashed masses" can cut'n'paste the right command
> to see it? TIA, either way.
maybe (I've been more busy fixing bugs in various programs recently than
updating webpages).
--
Thomas E. Dickey
dickey@clark.net
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<pe9w4.255$G15.5963@iad-read.news.verio.net>
<slrn8c5jik.4o6.ocurtin@jarod.oc>
Organization: The Minetown Digger
Message-ID: <slrn8c7r5p.7e7.ocurtin@jarod.oc>
Date: Mon, 6 Mar 2000 12:37:00 -0500
From: ocurtin@usa.net (Curly++)
Subject: Re: Escape sequences for xterm?
In comp.terminals, Curly++ proclaimed:
> DISCLAIMER: I'm not a security expert and I don't play one on TV.
Geez, I'll never get that TV job. <dramatic sigh>
I went back to look at Morten Welinder and Branden Robinson's
postings to bugtraq. Ya now, I don't even have to think to see
how *machines* could get confused splitting the data stream
between the local screen-image and the remote host. But Morten
Welinder clearly is describing the same kind of timing issue,
except the failure is in human ethical subroutines. I didn't see
it until I'd read it three times. <sigh> Such is the life of an
optimist. <grin>
I'm off to carefully read (at least three times!) the proposed
logging patch.
--
Oisin "Curly++" Curtin ocurtin@SPAM.usa.net
Surface Liaison, Minetown Digger Send no SPAM.
http://pages.infinit.net/curlypp/
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
Organization: Columbia University
Message-ID: <8a1bfi$sn5$1@newsmaster.cc.columbia.edu>
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<pe9w4.255$G15.5963@iad-read.news.verio.net>
<slrn8c5jik.4o6.ocurtin@jarod.oc> <slrn8c7r5p.7e7.ocurtin@jarod.oc>
Date: 6 Mar 2000 22:29:06 GMT
From: Jeffrey Altman <jaltman@watsun.cc.columbia.edu>
Subject: Re: Escape sequences for xterm?
In article <slrn8c7r5p.7e7.ocurtin@jarod.oc>,
Curly++ <ocurtin@NOSPAM.usa.net> wrote:
: In comp.terminals, Curly++ proclaimed:
:
: > DISCLAIMER: I'm not a security expert and I don't play one on TV.
:
: Geez, I'll never get that TV job. <dramatic sigh>
:
: I went back to look at Morten Welinder and Branden Robinson's
: postings to bugtraq. Ya now, I don't even have to think to see
: how *machines* could get confused splitting the data stream
: between the local screen-image and the remote host. But Morten
: Welinder clearly is describing the same kind of timing issue,
: except the failure is in human ethical subroutines. I didn't see
: it until I'd read it three times. <sigh> Such is the life of an
: optimist. <grin>
:
: I'm off to carefully read (at least three times!) the proposed
: logging patch.
There is no safe way for a host to specify a file name that should
be used for logging, or printing, or any other kind of output. If
host automated logging is the be provided it MUST be:
. authorized by the client
. to a file specified by the client
This should not be done via a standard control sequence. If it is
going to be done it should be performed via a private sequence (preferably
not a '?' sequence) or via an APC.
Jeffrey Altman * Sr.Software Designer * Kermit-95 for Win32 and OS/2
The Kermit Project * Columbia University
612 West 115th St #716 * New York, NY * 10025
http://www.kermit-project.org/k95.html * kermit-support@kermit-project.org
//////////////////////////////////////////////////////////////////////////////
From: ocurtin@NOSPAM.usa.net (Curly++)
Newsgroups: comp.terminals,comp.os.linux.admin
Subject: Re: Escape sequences for xterm?
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<pe9w4.255$G15.5963@iad-read.news.verio.net>
<slrn8c5jik.4o6.ocurtin@jarod.oc> <slrn8c7r5p.7e7.ocurtin@jarod.oc>
<8a1bfi$sn5$1@newsmaster.cc.columbia.edu>
Organization: The Minetown Digger
Date: Mon, 6 Mar 2000 22:10:52 -0500
In comp.os.linux.admin, Jeffrey Altman proclaimed:
> In article <slrn8c7r5p.7e7.ocurtin@jarod.oc>,
> Curly++ <ocurtin@NOSPAM.usa.net> wrote:
> : In comp.terminals, Curly++ proclaimed:
> :
> : > DISCLAIMER: I'm not a security expert and I don't play one on TV.
> :
> : Geez, I'll never get that TV job. <dramatic sigh>
> :
> : I went back to look at Morten Welinder and Branden Robinson's
> : postings to bugtraq. Ya now, I don't even have to think to see
> : how *machines* could get confused splitting the data stream
> : between the local screen-image and the remote host. But Morten
> : Welinder clearly is describing the same kind of timing issue,
> : except the failure is in human ethical subroutines. I didn't see
> : it until I'd read it three times. <sigh> Such is the life of an
> : optimist. <grin>
> :
> : I'm off to carefully read (at least three times!) the proposed
> : logging patch.
>
> There is no safe way for a host to specify a file name that should
> be used for logging, or printing, or any other kind of output. If
It's a connundrum, all right. I started this thinking it would be a
breeze. Making the part I needed was simple and straightforward.
Fitting it into the configurator was a bit more work. But making it
secure enough to distribute... this is tough!
> host automated logging is the be provided it MUST be:
>
> . authorized by the client
Yes. Authorization may be implicit, just as you "authorize" someone
to modify your log files by connectiong to your anonymous FTP server,
so too you might provide a very limited authorization to write to a
file within a carefully proscribed namespace.
> . to a file specified by the client
I've only really considered *nix for building a name. But I
suspect this can be easily addapted to other OSs.
I had hoped I could use the code that opens the log in the patch
posted to bugtraq, but the method seems broken to me. Also, I
can't see how it deals with the symlink problem, but I haven't
had time to play with it yet. It is broken in terms of the
forced naming. First, it allows the file to be anywhere because
it opens it in the current directory. I think it should be
restricted to a selection between the user's home directory and
the system-wide tmp directory. Second, using the time to create
a "unique" name is just wrong. A user starting two sessions from
the same shell script will have a problem, but can deal with it
by adding "sleep" to slow down that expensive, fast computer.
However, if it's two different users clicking at the same time,
the user cannot predict or prevent the collision. It would have
been less work and more reliable to use UID and PID instead of
time. Still not perfect, but at least the user can clean out old
files to prevent collisions.
I'm planning to put two restrictions. First, a screen dump must
go to a new file. This is harsh, but I think I need it to deal
with the symlink race problem. Second, the pathname of the file
is severely restricted. As long as the script/host has just a
little control, it can do nice things for the user. It doesn't
need full control of the pathname.
The pathname will be [dir]/screen[.UID.PID].txt where [dir] is
required and must be either "/tmp" or "/home/me". Home would be
determined from /etc/passwd, not from $HOME. I'd like to make
".UID.PID" replaceable within a narrow range. With these
restrictions, an external script which started the xterm (see
/bin/expect) can have just enough control to detect some trigger
and grab a screen image. A script should not be forced to do
extra work between keystrokes to clear the file if a name change
will be sufficient.
Requiring that a new file be created for each screen dump partly
protects existing files from modification, but doesn't fully deal
with the symlink race condition. I expect that can be solved
using the low-level I/O library, (i.e. open instead of fopen) but
I haven't set up the experiment yet.
Now, I *don't* think like a cracker, so if I've missed anything,
please point it out to me!
> This should not be done via a standard control sequence. If it is
> going to be done it should be performed via a private sequence (preferably
> not a '?' sequence) or via an APC.
Hmm. I was thinking...
OSC Ps ; P1 ; P2 ; Pt ST
where Ps is the unique value to select this service,
p1 is 0 for "use home", 1 for "use /tmp"
p2 is 0 for mode 0666, 1 for mode 0600
Pt is: empty to use UID.PID
" " (blank) to eliminate UID.PID
or 1-8 digits, letters and period.
A malicious host or a broken program could fill a partition with
files named screen.1.txt, screen.2.txt and so on. But I think
that's all it can do. Is filling the disk a serious enough
threat to limit the Pt to one character? That wouldn't be harsh,
but I think it's unnecessary.
Why is this a bad idea?
--
Oisin "Curly++" Curtin ocurtin@SPAM.usa.net
Surface Liaison, Minetown Digger Send no SPAM.
http://pages.infinit.net/curlypp/
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<pe9w4.255$G15.5963@iad-read.news.verio.net>
<slrn8c5jik.4o6.ocurtin@jarod.oc> <slrn8c7r5p.7e7.ocurtin@jarod.oc>
<8a1bfi$sn5$1@newsmaster.cc.columbia.edu> <slrn8c8spq.8st.ocurtin@jarod.oc>
Organization: Clark Internet Services, Inc., Ellicott City, MD USA
User-Agent: tin/1.5.2-20000119 ("Sumerland") (UNIX) (SunOS/5.6 (sun4u))
Lines: 15
Message-ID: <ZIdx4.1093$G15.28286@iad-read.news.verio.net>
Date: Tue, 07 Mar 2000 20:34:01 GMT
From: "T.E.Dickey" <dickey@shell.clark.net>
Subject: Re: Escape sequences for xterm?
Curly++ <ocurtin@nospam.usa.net> wrote:
> I had hoped I could use the code that opens the log in the patch
> posted to bugtraq, but the method seems broken to me. Also, I
briefly, the point of the patch is to ensure that the effective user owns
the file - and no one else. if the file is in a directory that prevents
non-owners from deleting the file, then that covers most of the remaining
issues. (I added a bit to that though - it's in the most recent patch
I made for xterm).
--
Thomas E. Dickey
dickey@clark.net
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
Organization: It's in one of the piles
Message-ID: <38C4C0D0.D5AD4FF@rdel.co.uk>
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<pe9w4.255$G15.5963@iad-read.news.verio.net>
<slrn8c5jik.4o6.ocurtin@jarod.oc> <slrn8c7r5p.7e7.ocurtin@jarod.oc>
<8a1bfi$sn5$1@newsmaster.cc.columbia.edu> <slrn8c8spq.8st.ocurtin@jarod.oc>
Date: Tue, 07 Mar 2000 08:41:52 +0000
From: Paul Williams <flo@rdel.co.uk>
Subject: Re: Escape sequences for xterm?
Curly++ wrote:
>
> In comp.os.linux.admin, Jeffrey Altman proclaimed:
> >
> > This should not be done via a standard control sequence. If it is
> > going to be done it should be performed via a private sequence
> > (preferably not a '?' sequence) or via an APC.
>
> Hmm. I was thinking...
>
> OSC Ps ; P1 ; P2 ; Pt ST
> where Ps is the unique value to select this service,
> p1 is 0 for "use home", 1 for "use /tmp"
> p2 is 0 for mode 0666, 1 for mode 0600
> Pt is: empty to use UID.PID
> " " (blank) to eliminate UID.PID
> or 1-8 digits, letters and period.
It's a shame that the writers of xterm didn't structure the code space
for OSC in the same way that DEC did with DCS, ie. use the same
Param ;...; Param Intermediate Final
structure as for CSI, with extra, textual parameters appearing after
Final and before ST. It would've made the parser a lot simpler, because
you'd know unambiguously where the text starts, even with a variable
number of parameters. At the moment, it seems that the existing codes
are of the form
OSC Ps ; Pt ST
which is OK until you add more Ps (or Pn) parameters before Pt. Then you
have to start doing something special in the parser based on the value
of the first Ps.
(Of course, this decision is historical -- no reflection on the current
maintainers. Never let history get in the way of a good whinge, I say!)
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
Organization: Columbia University
Lines: 41
Message-ID: <8a33dh$bko$1@newsmaster.cc.columbia.edu>
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<8a1bfi$sn5$1@newsmaster.cc.columbia.edu> <slrn8c8spq.8st.ocurtin@jarod.oc>
<38C4C0D0.D5AD4FF@rdel.co.uk>
Date: 7 Mar 2000 14:23:45 GMT
From: jaltman@watsun.cc.columbia.edu (Jeffrey Altman)
Subject: Re: Escape sequences for xterm?
In article <38C4C0D0.D5AD4FF@rdel.co.uk>,
Paul Williams <flo@rdel.co.uk> wrote:
: > OSC Ps ; P1 ; P2 ; Pt ST
: > where Ps is the unique value to select this service,
: > p1 is 0 for "use home", 1 for "use /tmp"
: > p2 is 0 for mode 0666, 1 for mode 0600
: > Pt is: empty to use UID.PID
: > " " (blank) to eliminate UID.PID
: > or 1-8 digits, letters and period.
:
: It's a shame that the writers of xterm didn't structure the code space
: for OSC in the same way that DEC did with DCS, ie. use the same
:
: Param ;...; Param Intermediate Final
:
: structure as for CSI, with extra, textual parameters appearing after
: Final and before ST. It would've made the parser a lot simpler, because
: you'd know unambiguously where the text starts, even with a variable
: number of parameters. At the moment, it seems that the existing codes
: are of the form
:
: OSC Ps ; Pt ST
:
: which is OK until you add more Ps (or Pn) parameters before Pt. Then you
: have to start doing something special in the parser based on the value
: of the first Ps.
The whole purpose of the control sequences OSC, APC, DCS, PM, PU1, PU2
are so that something special will be done with the contents. If you
can represent the command using X3.64 notation then you should not be
using an OSC but should instead be using a private CSI sequence.
Just to set the record straight, the OSC sequences for Set Window Title
and Set Icon Name were developed by DEC for the DECterm and were later
supported on windowing versions of the VT terminals.
Jeffrey Altman * Sr.Software Designer * Kermit-95 for Win32 and OS/2
The Kermit Project * Columbia University
612 West 115th St #716 * New York, NY * 10025
http://www.kermit-project.org/k95.html * kermit-support@kermit-project.org
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
Organization: It's in one of the piles
Lines: 57
Message-ID: <38C51FE0.11DD3325@rdel.co.uk>
References: <slrn8c06up.tai.ocurtin@jarod.oc>
<8a1bfi$sn5$1@newsmaster.cc.columbia.edu> <slrn8c8spq.8st.ocurtin@jarod.oc>
<38C4C0D0.D5AD4FF@rdel.co.uk> <8a33dh$bko$1@newsmaster.cc.columbia.edu>
Date: Tue, 07 Mar 2000 15:27:28 +0000
From: Paul Williams <flo@rdel.co.uk>
Subject: Re: Escape sequences for xterm?
Jeffrey Altman wrote:
>
> In article <38C4C0D0.D5AD4FF@rdel.co.uk>,
> Paul Williams <flo@rdel.co.uk> wrote:
> : > OSC Ps ; P1 ; P2 ; Pt ST
> : > where Ps is the unique value to select this service,
> : > p1 is 0 for "use home", 1 for "use /tmp"
> : > p2 is 0 for mode 0666, 1 for mode 0600
> : > Pt is: empty to use UID.PID
> : > " " (blank) to eliminate UID.PID
> : > or 1-8 digits, letters and period.
> :
> : It's a shame that the writers of xterm didn't structure the code space
> : for OSC in the same way that DEC did with DCS, ie. use the same
> :
> : Param ;...; Param Intermediate Final
> :
> : structure as for CSI, with extra, textual parameters appearing after
> : Final and before ST. It would've made the parser a lot simpler, because
> : you'd know unambiguously where the text starts, even with a variable
> : number of parameters. At the moment, it seems that the existing codes
> : are of the form
> :
> : OSC Ps ; Pt ST
> :
> : which is OK until you add more Ps (or Pn) parameters before Pt. Then you
> : have to start doing something special in the parser based on the value
> : of the first Ps.
>
> The whole purpose of the control sequences OSC, APC, DCS, PM, PU1, PU2
> are so that something special will be done with the contents. If you
> can represent the command using X3.64 notation then you should not be
> using an OSC but should instead be using a private CSI sequence.
You can't represent a command containing a sixel string or filename as a
CSI sequence, so yes, you must use one of the extension mechanisms you
listed above. However, that doesn't stop you structuring these in the
same way as CSI _up to a point_. It makes sense to use as much of the
existing parser for your new sequences, and then just differ at the
point where you need parameters that don't fit the CSI structure. Take a
look at all the DCS sequences defined by DEC, and you'll see that that's
exactly what they did.
> Just to set the record straight, the OSC sequences for Set Window Title
> and Set Icon Name were developed by DEC for the DECterm and were later
> supported on windowing versions of the VT terminals.
Then I'd say that DEC only ever intended their OSCs to have one
selective parameter. Any more than that, and your sequence starts
getting ambiguous, because ';' doesn't have any standard meaning in OSC.
Hmm...are you saying that DEC defined the sequence "OSC Ps ; title BEL"?
Because that's the only version of Set Window Title and Set Icon Name
that xterm used to accept. Or was that miscopied across from the DECterm
implementation?
Which "windowing versions of VT terminals" supported these sequences?
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
Message-ID: <8a39tn$et8$1@pegasus.csx.cam.ac.uk>
References: <slrn8c06up.tai.ocurtin@jarod.oc> <38C4C0D0.D5AD4FF@rdel.co.uk>
<8a33dh$bko$1@newsmaster.cc.columbia.edu> <38C51FE0.11DD3325@rdel.co.uk>
NNTP-Posting-Host: ursa.cus.cam.ac.uk
Organization: University of Cambridge, England
Date: 7 Mar 2000 16:14:47 GMT
From: bjh21@cus.cam.ac.uk (Ben Harris)
Subject: Re: Escape sequences for xterm?
In article <38C51FE0.11DD3325@rdel.co.uk>,
Paul Williams <flo@rdel.co.uk> wrote:
>Hmm...are you saying that DEC defined the sequence "OSC Ps ; title BEL"?
>Because that's the only version of Set Window Title and Set Icon Name
>that xterm used to accept. Or was that miscopied across from the DECterm
>implementation?
My rather vague understanding, from reading the PuTTY sources (PuTTY
supports both DECterm and xterm title sequences) is that DECterm uses
"OSC Ps L title ST" or somesuch.
--
Ben Harris
Unix Support, University of Cambridge Computing Service.
If I wanted to speak for the University, I'd be in ucam.comp-serv.announce.
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
Message-ID: <8a3am2$hs5$1@newsmaster.cc.columbia.edu>
References: <slrn8c06up.tai.ocurtin@jarod.oc> <38C4C0D0.D5AD4FF@rdel.co.uk>
<8a33dh$bko$1@newsmaster.cc.columbia.edu> <38C51FE0.11DD3325@rdel.co.uk>
Date: 7 Mar 2000 16:27:46 GMT
Organization: Columbia University
From: jaltman@watsun.cc.columbia.edu (Jeffrey Altman)
Subject: Re: Escape sequences for xterm?
In article <38C51FE0.11DD3325@rdel.co.uk>,
Paul Williams <flo@rdel.co.uk> wrote:
:
: You can't represent a command containing a sixel string or filename as a
: CSI sequence, so yes, you must use one of the extension mechanisms you
: listed above. However, that doesn't stop you structuring these in the
: same way as CSI _up to a point_. It makes sense to use as much of the
: existing parser for your new sequences, and then just differ at the
: point where you need parameters that don't fit the CSI structure. Take a
: look at all the DCS sequences defined by DEC, and you'll see that that's
: exactly what they did.
And when you can do that you use a DCS instead of an OSC or APC.
DEC was very consistent about this. All DCS sequences follow X3.64 and
the others do not.
: > Just to set the record straight, the OSC sequences for Set Window Title
: > and Set Icon Name were developed by DEC for the DECterm and were later
: > supported on windowing versions of the VT terminals.
:
: Then I'd say that DEC only ever intended their OSCs to have one
: selective parameter. Any more than that, and your sequence starts
: getting ambiguous, because ';' doesn't have any standard meaning in OSC.
:
: Hmm...are you saying that DEC defined the sequence "OSC Ps ; title BEL"?
: Because that's the only version of Set Window Title and Set Icon Name
: that xterm used to accept. Or was that miscopied across from the DECterm
: implementation?
DEC defined it.
DECSWT (Set Window Title)
DECSIN (Set Icon Name)
: Which "windowing versions of VT terminals" supported these sequences?
VT5xx has it. And I think the VT420 had it but I don't have a manual to
check against at the moment.
Jeffrey Altman * Sr.Software Designer * Kermit-95 for Win32 and OS/2
The Kermit Project * Columbia University
612 West 115th St #716 * New York, NY * 10025
http://www.kermit-project.org/k95.html * kermit-support@kermit-project.org
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
Organization: It's in one of the piles
Lines: 20
Message-ID: <38C52F31.57255BB4@rdel.co.uk>
References: <slrn8c06up.tai.ocurtin@jarod.oc> <38C4C0D0.D5AD4FF@rdel.co.uk>
<8a33dh$bko$1@newsmaster.cc.columbia.edu> <38C51FE0.11DD3325@rdel.co.uk>
<8a3am2$hs5$1@newsmaster.cc.columbia.edu>
Date: Tue, 07 Mar 2000 16:32:49 +0000
From: Paul Williams <flo@rdel.co.uk>
Subject: Re: Escape sequences for xterm?
Jeffrey Altman wrote:
>
> In article <38C51FE0.11DD3325@rdel.co.uk>,
> Paul Williams <flo@rdel.co.uk> wrote:
> :
> : You can't represent a command containing a sixel string or filename as a
> : CSI sequence, so yes, you must use one of the extension mechanisms you
> : listed above. However, that doesn't stop you structuring these in the
> : same way as CSI _up to a point_. It makes sense to use as much of the
> : existing parser for your new sequences, and then just differ at the
> : point where you need parameters that don't fit the CSI structure. Take a
> : look at all the DCS sequences defined by DEC, and you'll see that that's
> : exactly what they did.
>
> And when you can do that you use a DCS instead of an OSC or APC.
> DEC was very consistent about this. All DCS sequences follow X3.64 and
> the others do not.
But this was _only_ a DEC decision. IIRC, DCS is not defined by X3.64 to
have any more structure than OSC or APC.
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals,comp.os.linux.admin
From: "T.E.Dickey" <dickey@shell.clark.net>
Subject: Re: Escape sequences for xterm?
References: <slrn8c06up.tai.ocurtin@jarod.oc> <38C4C0D0.D5AD4FF@rdel.co.uk>
<8a33dh$bko$1@newsmaster.cc.columbia.edu> <38C51FE0.11DD3325@rdel.co.uk>
<8a39tn$et8$1@pegasus.csx.cam.ac.uk>
Message-ID: <4Rdx4.1096$G15.28286@iad-read.news.verio.net>
Date: Tue, 07 Mar 2000 20:42:40 GMT
Ben Harris <bjh21@cus.cam.ac.uk> wrote:
> In article <38C51FE0.11DD3325@rdel.co.uk>,
> Paul Williams <flo@rdel.co.uk> wrote:
>>Hmm...are you saying that DEC defined the sequence "OSC Ps ; title BEL"?
>>Because that's the only version of Set Window Title and Set Icon Name
>>that xterm used to accept. Or was that miscopied across from the DECterm
>>implementation?
> My rather vague understanding, from reading the PuTTY sources (PuTTY
> supports both DECterm and xterm title sequences) is that DECterm uses
> "OSC Ps L title ST" or somesuch.
yes (OSC is supposed to end with ST, DECterm does the Right Thing).
I had the impression that Sun's use of this sort of escape sequence
preceded DEC's - but since both were implemented ~12 years ago, I'm
not sure (I was using Apollo's at the time, and didn't much like X or
xterm ;-).
-- XFree86 xterm recognizes both...
--
Thomas E. Dickey
dickey(at)clark.net
http://www.clark.net/pub/dickey
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.unix.solaris,comp.terminals,comp.windows.x.apps,
comp.unix.questions
References: <3B4225C4.FB86F2EC@to.gd-es.com> <3b425acd@news.uni-ulm.de>
<q8t07.50$iL4.120016@news.pacbell.net> <20010704190000_rshu@stratagy.com>
User-Agent: tin/1.4.5-20010409 ("One More Nightmare") (UNIX) (SunOS/5.8 (sun4u))
Organization: united xpiloteers
Message-ID: <3b437542@news.uni-ulm.de>
Supersedes: <3b437389@news.uni-ulm.de>
Date: 4 Jul 2001 21:57:54 +0200
From: Sven Mascheck <sven.mascheck(at)student.uni-ulm.de>
Subject: Re: resetting xterm under Solaris 8
[sorry, supersede: named original group, 2 typos]
In comp.unix.solaris, Richard S. Shuford wrote:
>
> Allen M. Cohen wrote:
>> Sometimes an xterm session gets stuck in either reverse video state
>> and/or underline state.
> However, I think Allen is *not* reporting a line-drawing character problem.
Yup, thanks for pointing out, i confused underline with linedrawing!
My reference [1]tried to cover this and all related stuff (xterm reset,
using an alias to reset a VT like terminal, reason for linedrawing problems,
as text really becomes unreadable, then) in detail with explanations.
> I devised a C-shell hack that sends some appropriate control sequences to
> an DEC-VT100/VT220-compatible terminal or emulator that should bring it to
> a known good state. A uuencoded self-explanatory file "cls.uue" appears
> below.
Nice idea to use uuencoding to transfer the control sequences via Usenet.
An alternative i had found in an old Usenet posting ('95) is something
like the follwing (here bourne shell):
alias vtn='echo "X[mX(BX)0OX[?5lX7X[rX8" | tr "XO" "\033\017"'
This is even editable on the run when experimenting.
BTW, about your control sequences: In XFree86/X11 xterm with
TERM=xterm-xfree86/vt100, the last few characters are "left over"
("8J i<esc>"). Perhaps as there is a "nobreakspace" contained.
When skipping this last control sequence for now, your version would read
alias vtn='echo "X[4iX[?4iX[?38lX\X(BX)0OX[?5lX[0mX[rX[HX[JY[4iX[?4iX[?38lX\X(BX)0OX[?5lX[0mX[rX[H" | tr "XOY" "\033\017\203"'
(line broken at end)
[I am not sure about the FUP2, comp.terminals?]
Sven
--
[1] <http://www.uni-ulm.de/~s_smasch/alternate_charset/>, tuned for critics
2003 updated URL:
http://www.in-ulm.de/~mascheck/various/alternate_charset/
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.unix.solaris,comp.terminals,comp.windows.x.apps,
comp.unix.questions
Message-ID: <20010705163030_rshu@stratagy.com>
References: <3B4225C4.FB86F2EC@to.gd-es.com> <3b425acd@news.uni-ulm.de>
<q8t07.50$iL4.120016@news.pacbell.net>
<20010704190000_rshu@stratagy.com>
<3b437542@news.uni-ulm.de>
Organization: Stratagy Users Group
Expires: Wed, 15 Aug 2001 23:59:59 GMT
Date: Thu, 5 Jul 2001 16:30:30 GMT
From: "Richard S. Shuford" <shuford@list.stratagy.REMOVE-THIS-PART.com>
Subject: Re: resetting xterm under Solaris 8
Sven Mascheck <sven.mascheck(at)student.uni-ulm.de> wrote:
>
> BTW, about your control sequences: In XFree86/X11 xterm with
> TERM=xterm-xfree86/vt100, the last few characters are "left over"
> ("8J i<esc>"). Perhaps as there is a "nobreakspace" contained.
This is puzzling. The sequence "8J i" does not appear in my file.
Here again is the uuencoded form:
-----------------------------------------------------------
begin 444 .cls
J&ULT:1M;/S1I&UL_,SAL&UP;*$(;*3 /&UL_-6P;6S!M&UMR&UM(&UM*
end
-----------------------------------------------------------
When decoded and after the unprintables are rendered into printable
tokens, it looks like this:
^[[4i^[[?4i^[[?38l^[\^[(B^[)0^O^[[?5l^[[0m^[[r^[[H^[[J
There is nothing in there that should be interpreted as a "nobreakspace",
if the ANSI X3.64 parsing rules are being properly followed.
Is it possible that your "uudecode" program is decoding improperly?
The XFree86/X11 distribution contains the "xterm" variant maintained
by Thomas Dickey, and I certainly have tested my little hack with an
earlier version of that package.
I note that several people have contributed suggestions on how to
reset xterm visual attributes using the "tput" command to extract
codes from the "terminfo" database. This is arguably the "proper"
way to do the job, but my cat-the-file hack does work even if the
terminal type is set wrong, and it also resets some obscure modes
of DEC-style terminals that may not be represented by codes in the
terminfo database. (There are yet some people in the world who are
using real VT420 character-cell terminals to connect to Solaris!)
Other video-terminal information is archived at
http://www.cs.utk.edu/~shuford/terminal_index.html (contains file you are now viewing)
...Richard S. Shuford
//////////////////////////////////////////////////////////////////////////////
In most Solaris releases, the following trivial shell script is equivalent.
#!/bin/sh
printf \
"\033[4i\033[?4i\033[?38l\033\\033(B\033)0\017\033[?5l\033[0m\033[r\033[H\033[J"
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.unix.solaris
Organization: http://groups.google.com/
Message-ID: <860c5108.0107021102.531938f1@posting.google.com>
References: <4f8fe677.0106282305.58233eb5@posting.google.com>
<9hllcp$sdh$1@news.okay.net>
NNTP-Posting-Date: 2 Jul 2001 19:02:57 GMT
Date: 2 Jul 2001 12:02:56 -0700
From: cvernon(at)enron.com (Clayton Vernon)
Subject: Re: xterm session crashes very often
"Thomas Dehn" <thomas-usenet(at)myokay.net> wrote in message news:<9hllcp$sdh$1@news.okay.net>...
> "Radhakrishnan" <radhakrishnanv(at)yahoo.com> wrote:
> > We are using Hummingbird Excedd
> > as Xserver on NT4.0 to connect to
> > boxes across WAN. Very often, the Xserver crashes. Have anyone faced
> > this kind of problem?
>
> Use the current version of eXceed on the PC side.
> Make sure that fonts you are using are available
> to your Xserver.
>
>
>
> Thomas
i use the hell out of exceed and i've never seen it "crash" per se.
what i have seen are certain java applications map to the pc display
in a way appearing to "crash" the task bar (they co-opt the entire
display). and, i have seen in these java apps that they have
difficulty permitting keystrokes in the java-based x-window- on one of
my apps i run the java app 'nohup' in the background and completely
kill off the invoking cmdtool/xterm. but, if you kill off the java app
windows returns as normal.
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.unix.admin,comp.unix.cde,comp.unix.solaris
Path: !uunet!dca.uu.net!newsfeed.fast.net!howland.erols.net
!news.maxwell.syr.edu!news.alt.net!usenet
Organization: NYPD: We don't need no stinkin' license plates!
Message-ID: <9i7aje$lgd$5@pita.alt.net>
References: <a7b61a8c.0107052049.7dcb8351@posting.google.com>
<9i43cl$ac6$1@news1.Radix.Net>
Fromage: cypher-@-punk.net goes to /dev/null
Date: 7 Jul 2001 15:41:34 GMT
From: cypher-@-punk.net
Subject: Re: Escape sequence for "clear" command
In comp.unix.solaris Thomas Dickey <dickey(at)saltmine.radix.net> wrote:
# In comp.unix.admin guess <guessfirst(at)yahoo.com> wrote:
# > Hello,
#
# > I'm using Solaris 8 (SPARC platform). Just started to use dtterm on
# > CDE(prevously was openwin). When I issue the "clear" command in front
# > of the Sun monitor (not using telnet), I want it to clear the
# > screen (cursor at the upper left hand corner, no problem with this).
# >
# > However I don't want it to clear the previous screen buffer, meaning
# > that I'm still able to scroll back to look at previous screen's data.
# > For those of u who have experience in openwin should know what I want
# > coz the "clear" command behaved this way under openwin. But it doesn't
# > work this way anymore under CDE (dtterm), it clears the previous screen
# > buffer as well. I can't scroll back to view the previous screen.
#
# I'd try the ANSI sequences for home, clear to end of display:
#
# \E[H\E[0J
#
# The XFree86 xterm supports ANSI color and VT220 emulation
# There's an faq at
#
# http://dickey.his.com/xterm/xterm.faq.html
# ftp://dickey.his.com/xterm
And, not that anyone has asked...
If you want an xterm to repaint the screen after using 'vi',
add these to /usr/share/lib/terminfo/x/xterm:
tail -1 /usr/share/lib/terminfo/x/xterm.src
rmcup=\E[2J\E[?47l\E8, smcup=\E7\E[?47h,
Use 'infocmp' to get source from the compiled 'xterm' entry,
use 'tic' to compile it again.
//////////////////////////////////////////////////////////////////////////////
Date: 15 Jul 2001 11:18:48 +0200
Organization: united xpiloteers
Newsgroups: comp.unix.solaris
Message-ID: <3b515ff8@news.uni-ulm.de>
References: <m1ae2929n9.fsf@reader.newsguy.com>
<3B4F2D40.203CBDFA@kodak.com>
From: Sven Mascheck <sven.mascheck@student.uni-ulm.de>
Subject: Re: console login terminal color
Mathew Kirsch <kirsch@kodak.com> wrote:
> Harry Putnam wrote:
>> If I choose terminal login from the selector thing. I get a white
>> terminal with black foreground.
> [...] Besides, a graphical console should be used for a GUI.
$ xterm -xrm 'XTerm*font: gallant' \
-xrm 'XTerm*background: white' \
-xrm 'XTerm*foreground: black' \
-xrm 'XTerm*cursorColor: black' \
-xrm 'XTerm*scrollBar: False' \
-xrm 'XTerm.VT100.geometry: 80x34+80+100' \
-name long_live_the_console
SvenCNR
..............................................................................
2003 update:
Subsequently, Sven found that the font alias "gallant" works only
on SunOS 5.5 (Solaris 2.5). Instead, the font name "Gallant19" is
the right choice for the later releases. (And in fact it's
"-sun-gallant-demi-r-normal--19-190-72-72-m-120-iso8859-1").
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals
References: <vtLKd.496$AY3.116@trndny05>
Message-ID: <10vn3cvh4mio89b@corp.supernews.com>
Date: Sat, 29 Jan 2005 13:20:31 -0000
From: Thomas Dickey <dickey@saltmine.radix.net>
Subject: Re: Hot-key to minimize Putty
Barry <mail%polisource.com> wrote:
>
> Any tips for minimizing the current Putty window?
It might respond to the window-modification escape sequences that xterm
implements. These are demonstrated by vttest...
http://invisible-island.net/vttest/
under menu 11.
(A quick read of the source code doesn't tell me yes/no to this question;
it does honor the title change).
--
Thomas E. Dickey
http://invisible-island.net/
ftp://invisible-island.net/
//////////////////////////////////////////////////////////////////////////////
Newsgroups: comp.terminals
References: <20070507215136.GG3593@interface.famille.thibault.fr>
Message-ID: <1340luvjj2uf49d@corp.supernews.com>
Date: Tue, 08 May 2007 10:58:39 -0000
From: Thomas Dickey <dickey@saltmine.radix.net>
Subject: Re: Getting the cursor coordinates?
Samuel Thibault <samuel.thibault@ens-lyon.org> wrote:
>
> Hi,
>
> How standard is the CSI 6 n combination for getting the cursor position?
> Can we reasonnably expect usual virtual terminals (unix virtual
> consoles, xterms, ...) to always have it?
It doesn't work with Sun's console emulator. Can't test at the moment,
but since I don't see the data for *BSD consoles, the same limitation
may apply there as well.
--
Thomas E. Dickey
http://invisible-island.net/
ftp://invisible-island.net/
//////////////////////////////////////////////////////////////////////////////