sys64738
/
DragonProbe
1
0
Fork 0
Code Issues 1 Pull Requests 1 Releases Wiki Activity

Update 'Default/standard mode'

Triss 2021-08-17 22:23:26 +00:00
parent 4691707d72
commit 4375ae0620
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Default%2Fstandard-mode.md

@ -34,7 +34,7 @@ The default/standard mode, mode 1, exposes various interfaces.
The UART interface allows one to interact with another device over a UART port, using a USB-CDC device (`/dev/ttyACMx`). Baudrate and other line coding settings are applied from the settings from the USB-CDC host, and thus require no special configuration tool.
It is possible to enable hardware flow control (using `CTS` and `RTS` lines), it can be enabled or disabled using [`dmctl uart-cts-rts`](dmctl#uart-cts-rts).
It is possible to enable hardware flow control (using `CTS` and `RTS` lines), it can be enabled or disabled using [`dpctl uart-cts-rts`](dpctl#uart-cts-rts).
### JTAG and SWD
@ -87,7 +87,7 @@ i2c-13 i2c AUX C/DDI C/PHY C I2C adapter
If the board/MCU has a temperature sensor, it is made available as [a Linux hwmon kernel module](Linux-kernel-modules), making the output available for use in `lm_sensors` output.
Additionally, it can also be configured to appear on the device's I2C bus as an emulated I2C device, pretending to be a JC42-compliant temperature sensor (more precisely, the Microchip MCP9808). This can be achieved using [`dmctl tempsensor`](dmctl#tempsensor) (with `BUSNUM` the number from the above
Additionally, it can also be configured to appear on the device's I2C bus as an emulated I2C device, pretending to be a JC42-compliant temperature sensor (more precisely, the Microchip MCP9808). This can be achieved using [`dpctl tempsensor`](dpctl#tempsensor) (with `BUSNUM` the number from the above
`i2cdetect -l` output):
```