sys64738
/
DragonProbe
1
0
Fork 0
Code Issues 1 Pull Requests 1 Releases Wiki Activity

Update 'Default/standard mode'

Triss 2021-07-30 17:41:53 +00:00
parent 734c3f10a4
commit 7b95a38e8c
1 changed files with 2 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Default%2Fstandard-mode.md

@ -34,8 +34,7 @@ The default/standard mode, mode 1, exposes various interfaces.
The UART interface allows one to interact with another device over a UART port, using a USB-CDC device (`/dev/ttyACMx`). Baudrate and other line coding settings are applied from the settings from the USB-CDC host, and thus require no special configuration tool.
It is possible to enable hardware flow control (using `CTS` and `RTS` lines), it can be enabled or disabled using `dmctl uart-cts-rts [--get|--set]`.
It is possible to enable hardware flow control (using `CTS` and `RTS` lines), it can be enabled or disabled using [`dmctl uart-cts-rts`](dmctl#uart-cts-rts).
### JTAG and SWD
The device exposes CMSIS-DAP functionality over a USB HID interface, which can be used for JTAG or SWD debugging. No special configuration is required to use it.
@ -87,7 +86,7 @@ i2c-13 i2c AUX C/DDI C/PHY C I2C adapter
If the board/MCU has a temperature sensor, it is made available as a Linux hwmon kernel module, making the output available for use in `lm_sensors` output.
Additionally, it can also be configured to appear on the device's I2C bus as an emulated I2C device, pretending to be a JC42-compliant temperature sensor (more precisely, the Microchip MCP9808). This can be achieved using `dmctl tempsensor --set <addr>` (with `BUSNUM` the number from the above
Additionally, it can also be configured to appear on the device's I2C bus as an emulated I2C device, pretending to be a JC42-compliant temperature sensor (more precisely, the Microchip MCP9808). This can be achieved using [`dmctl tempsensor`](dmctl#tempsensor) (with `BUSNUM` the number from the above
`i2cdetect -l` output):
```