hosted/cli: Cleaned up the information print out code so we only make one call for the whole thing
This commit is contained in:
dragonmux
Piotr Esden-Tempski
parent
af0d597fb0
commit
19c2e56f13
|
|
@ -130,65 +130,68 @@ static void bmp_munmap(struct mmap_data *map)
|
||||||
static void cl_help(char **argv)
|
static void cl_help(char **argv)
|
||||||
{
|
{
|
||||||
bmp_ident(NULL);
|
bmp_ident(NULL);
|
||||||
PRINT_INFO("\n");
|
PRINT_INFO(
|
||||||
PRINT_INFO("Usage: %s [-h | -l | [-vBITMASK] [-d PATH | -P NUMBER | -s SERIAL | -c TYPE]\n", argv[0]);
|
"\n"
|
||||||
PRINT_INFO(" [-n NUMBER] [-j] [-C] [-t | -T] [-e] [-p] [-R[h]] [-H] [-M STRING ...]\n");
|
"Usage: %s [-h | -l | [-vBITMASK] [-d PATH | -P NUMBER | -s SERIAL | -c TYPE]\n"
|
||||||
PRINT_INFO(" [-E | -w | -V | -r] [-a ADDR] [-S number] [file]]\n");
|
" [-n NUMBER] [-j] [-C] [-t | -T] [-e] [-p] [-R[h]] [-H] [-M STRING ...]\n"
|
||||||
PRINT_INFO("\n");
|
" [-E | -w | -V | -r] [-a ADDR] [-S number] [file]]\n"
|
||||||
PRINT_INFO("Single-shot and verbosity options [-h | -l | -vBITMASK]:\n");
|
"\n"
|
||||||
PRINT_INFO("\t-h Show the version version and this help, then exit\n");
|
"Single-shot and verbosity options [-h | -l | -vBITMASK]:\n"
|
||||||
PRINT_INFO("\t-l List available supported probes\n");
|
"\t-h Show the version version and this help, then exit\n"
|
||||||
PRINT_INFO("\t-v<bitmask> Set the output verbosity level based on some combination of:\n");
|
"\t-l List available supported probes\n"
|
||||||
PRINT_INFO("\t 1 = INFO, 2 = GDB, 4 = TARGET, 8 = PROBE, 16 = WIRE\n");
|
"\t-v<bitmask> Set the output verbosity level based on some combination of:\n"
|
||||||
PRINT_INFO("\n");
|
"\t 1 = INFO, 2 = GDB, 4 = TARGET, 8 = PROBE, 16 = WIRE\n"
|
||||||
PRINT_INFO("Probe selection arguments [-d PATH | -P NUMBER | -s SERIAL | -c TYPE]:\n");
|
"\n"
|
||||||
PRINT_INFO("\t-d <path> Use a serial device at the given path (Deprecated!)\n");
|
"Probe selection arguments [-d PATH | -P NUMBER | -s SERIAL | -c TYPE]:\n"
|
||||||
PRINT_INFO("\t-P <number> Use the <number>th debug probe found while scanning the\n");
|
"\t-d <path> Use a serial device at the given path (Deprecated!)\n"
|
||||||
PRINT_INFO("\t system, see the output from list for the order\n");
|
"\t-P <number> Use the <number>th debug probe found while scanning the\n"
|
||||||
PRINT_INFO("\t-s <serial> Select the debug probe with the given serial number\n");
|
"\t system, see the output from list for the order\n"
|
||||||
PRINT_INFO("\t-c <type> Select the FTDI-based debug probe with of the given\n");
|
"\t-s <serial> Select the debug probe with the given serial number\n"
|
||||||
PRINT_INFO("\t type (cable)\n");
|
"\t-c <type> Select the FTDI-based debug probe with of the given\n"
|
||||||
PRINT_INFO("\n");
|
"\t type (cable)\n"
|
||||||
PRINT_INFO("The default is to start a debug server at localhost:2000\n");
|
"\n"
|
||||||
PRINT_INFO("General configuration options: [-n NUMBER] [-j] [-C] [-t | -T] [-e] [-p] [-R[h]]\n");
|
"The default is to start a debug server at localhost:2000\n"
|
||||||
PRINT_INFO(" [-H] [-M STRING ...]\n");
|
"General configuration options: [-n NUMBER] [-j] [-C] [-t | -T] [-e] [-p] [-R[h]]\n"
|
||||||
PRINT_INFO("\t-n <number> Select the target device at the given position in the\n");
|
" [-H] [-M STRING ...]\n"
|
||||||
PRINT_INFO("\t scan chain (use the -t option to get a scan chain listing)\n");
|
"\t-n <number> Select the target device at the given position in the\n"
|
||||||
PRINT_INFO("\t-j Use JTAG instead of SWD\n");
|
"\t scan chain (use the -t option to get a scan chain listing)\n"
|
||||||
PRINT_INFO("\t-C Connect to target under hardware reset\n");
|
"\t-j Use JTAG instead of SWD\n"
|
||||||
PRINT_INFO("\t-t Perform a chain scan and display information about the\n");
|
"\t-C Connect to target under hardware reset\n"
|
||||||
PRINT_INFO("\t conected devices\n");
|
"\t-t Perform a chain scan and display information about the\n"
|
||||||
PRINT_INFO("\t-T Perform continues read- or write-back of a value to allow\n");
|
"\t conected devices\n"
|
||||||
PRINT_INFO("\t measurement of protocol timing. Aborted by ^C\n");
|
"\t-T Perform continues read- or write-back of a value to allow\n"
|
||||||
PRINT_INFO("\t-e Assume external resistors for FTDI devices, that is having the\n");
|
"\t measurement of protocol timing. Aborted by ^C\n"
|
||||||
PRINT_INFO("\t FTDI chip connected through resistors to TMS, TDI and TDO\n");
|
"\t-e Assume external resistors for FTDI devices, that is having the\n"
|
||||||
PRINT_INFO("\t-p Power the target from the probe (if possible)\n");
|
"\t FTDI chip connected through resistors to TMS, TDI and TDO\n"
|
||||||
PRINT_INFO("\t-R[h] Reset the device. If followed by 'h', this will be done using\n");
|
"\t-p Power the target from the probe (if possible)\n"
|
||||||
PRINT_INFO("\t the hardware reset line instead of over the debug link\n");
|
"\t-R[h] Reset the device. If followed by 'h', this will be done using\n"
|
||||||
PRINT_INFO("\t-H Do not use the high level command API (bmp-remote)\n");
|
"\t the hardware reset line instead of over the debug link\n"
|
||||||
PRINT_INFO("\t-M <string> Run target-specific monitor commands. This option\n");
|
"\t-H Do not use the high level command API (bmp-remote)\n"
|
||||||
PRINT_INFO("\t can be repeated for as many commands you wish to run.\n");
|
"\t-M <string> Run target-specific monitor commands. This option\n"
|
||||||
PRINT_INFO("\t If the command contains spaces, use quotes around the\n");
|
"\t can be repeated for as many commands you wish to run.\n"
|
||||||
PRINT_INFO("\t complete command\n");
|
"\t If the command contains spaces, use quotes around the\n"
|
||||||
PRINT_INFO("\n");
|
"\t complete command\n"
|
||||||
PRINT_INFO("SWD-specific configuration options [-f FREQUENCY | -m TARGET]:\n");
|
"\n"
|
||||||
PRINT_INFO("\t-f <frequency> Set an operating frequency for SWD\n");
|
"SWD-specific configuration options [-f FREQUENCY | -m TARGET]:\n"
|
||||||
PRINT_INFO("\t-m <target> Use the given target ID for selection in SWD multi-drop\n");
|
"\t-f <frequency> Set an operating frequency for SWD\n"
|
||||||
PRINT_INFO("\n");
|
"\t-m <target> Use the given target ID for selection in SWD multi-drop\n"
|
||||||
PRINT_INFO("Flash operation selection options [-E | -w | -V | -r]:\n");
|
"\n"
|
||||||
PRINT_INFO("\t-E Erase the target device Flash\n");
|
"Flash operation selection options [-E | -w | -V | -r]:\n"
|
||||||
PRINT_INFO("\t-w Write the specified binary file to the target device\n");
|
"\t-E Erase the target device Flash\n"
|
||||||
PRINT_INFO("\t Flash (the default)\n");
|
"\t-w Write the specified binary file to the target device\n"
|
||||||
PRINT_INFO("\t-V Verify the target device Flash against the specified\n");
|
"\t Flash (the default)\n"
|
||||||
PRINT_INFO("\t binary file\n");
|
"\t-V Verify the target device Flash against the specified\n"
|
||||||
PRINT_INFO("\t-r Read the target device Flash\n");
|
"\t binary file\n"
|
||||||
PRINT_INFO("\n");
|
"\t-r Read the target device Flash\n"
|
||||||
PRINT_INFO("Flash operation modifiers options: [-a ADDR] [-S number] [FILE]\n");
|
"\n"
|
||||||
PRINT_INFO("\t-a <addr> Start address for the given Flash operation (defaults to\n");
|
"Flash operation modifiers options: [-a ADDR] [-S number] [FILE]\n"
|
||||||
PRINT_INFO("\t the start of Flash)\n");
|
"\t-a <addr> Start address for the given Flash operation (defaults to\n"
|
||||||
PRINT_INFO("\t-S <number> Number of bytes to work on in the Flash operation (default\n");
|
"\t the start of Flash)\n"
|
||||||
PRINT_INFO("\t is till the operation fails or is complete)\n");
|
"\t-S <number> Number of bytes to work on in the Flash operation (default\n"
|
||||||
PRINT_INFO("\t<file> Binary file to use in Flash operations\n");
|
"\t is till the operation fails or is complete)\n"
|
||||||
|
"\t<file> Binary file to use in Flash operations\n",
|
||||||
|
argv[0]
|
||||||
|
);
|
||||||
exit(0);
|
exit(0);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue