usps_f407: add another platform
This commit is contained in:
Uwe Bonnes
parent
31f39339fd
commit
327ee49a67
|
|
@ -198,6 +198,8 @@ static const char *usb_strings[] = {
|
|||
"Black Magic (Upgrade) for STM32_CAN, (Firmware 1.5" VERSION_SUFFIX ", build " BUILDDATE ")",
|
||||
#elif defined(F4DISCOVERY)
|
||||
"Black Magic (Upgrade) for F4Discovery, (Firmware 1.5" VERSION_SUFFIX ", build " BUILDDATE ")",
|
||||
#elif defined(USPS_F407)
|
||||
"Black Magic (Upgrade) for USPS_F407, (Firmware 1.5" VERSION_SUFFIX ", build " BUILDDATE ")",
|
||||
#else
|
||||
#warning "Unhandled board"
|
||||
#endif
|
||||
|
|
@ -209,7 +211,7 @@ static const char *usb_strings[] = {
|
|||
"@Internal Flash /0x08000000/8*001Ka,56*001Kg"
|
||||
#elif defined(STM32_CAN)
|
||||
"@Internal Flash /0x08000000/4*002Ka,124*002Kg"
|
||||
#elif defined(F4DISCOVERY)
|
||||
#elif defined(F4DISCOVERY) || defined(USPS_F407)
|
||||
"@Internal Flash /0x08000000/1*016Ka,3*016Kg,1*064Kg,7*128Kg"
|
||||
#else
|
||||
#warning "Unhandled board"
|
||||
|
|
@ -386,6 +388,15 @@ int main(void)
|
|||
#elif defined (F4DISCOVERY)
|
||||
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPAEN);
|
||||
if(!gpio_get(GPIOA, GPIO0)) {
|
||||
#elif defined (USPS_F407)
|
||||
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPBEN);
|
||||
/* Pull up an look if external pulled low or if we restart with PB1 low*/
|
||||
GPIOB_PUPDR |= 4;
|
||||
{
|
||||
int i;
|
||||
for(i=0; i<100000; i++) __asm__("NOP");
|
||||
}
|
||||
if(gpio_get(GPIOB, GPIO1)) {
|
||||
#else
|
||||
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPBEN);
|
||||
if(gpio_get(GPIOB, GPIO12)) {
|
||||
|
|
@ -426,7 +437,7 @@ int main(void)
|
|||
#endif
|
||||
|
||||
/* Set up clock*/
|
||||
#if defined (F4DISCOVERY)
|
||||
#if defined (F4DISCOVERY) || defined(USPS_F407)
|
||||
rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_168MHZ]);
|
||||
systick_set_clocksource(STK_CTRL_CLKSOURCE_AHB_DIV8);
|
||||
systick_set_reload(2100000);
|
||||
|
|
@ -449,6 +460,7 @@ int main(void)
|
|||
gpio_set_mode(GPIOA, GPIO_MODE_OUTPUT_2_MHZ,
|
||||
GPIO_CNF_OUTPUT_OPENDRAIN, GPIO12);
|
||||
#elif defined(F4DISCOVERY)
|
||||
#elif defined(USPS_F407)
|
||||
#elif defined(STM32_CAN)
|
||||
#else
|
||||
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
|
||||
|
|
@ -466,6 +478,11 @@ int main(void)
|
|||
gpio_clear(GPIOD, GPIO12 | GPIO13 | GPIO14 |GPIO15);
|
||||
gpio_mode_setup(GPIOD, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,
|
||||
GPIO12 | GPIO13 | GPIO14 |GPIO15);
|
||||
#elif defined(USPS_F407)
|
||||
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPBEN);
|
||||
gpio_clear(GPIOB, GPIO2);
|
||||
gpio_mode_setup(GPIOB, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE,
|
||||
GPIO2);
|
||||
#elif defined (STM32_CAN)
|
||||
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_2_MHZ,
|
||||
GPIO_CNF_OUTPUT_PUSHPULL, GPIO0);
|
||||
|
|
@ -562,6 +579,8 @@ void sys_tick_handler()
|
|||
led2_state++;
|
||||
#elif defined (F4DISCOVERY)
|
||||
gpio_toggle(GPIOD, GPIO12); /* Green LED on/off */
|
||||
#elif defined (USPS_F407)
|
||||
gpio_toggle(GPIOB, GPIO2); /* Green LED on/off */
|
||||
#elif defined(STM32_CAN)
|
||||
gpio_toggle(GPIOB, GPIO0); /* LED2 on/off */
|
||||
#else
|
||||
|
|
|
|||
|
|
@ -0,0 +1,36 @@
|
|||
CROSS_COMPILE ?= arm-none-eabi-
|
||||
CC = $(CROSS_COMPILE)gcc
|
||||
OBJCOPY = $(CROSS_COMPILE)objcopy
|
||||
|
||||
CFLAGS += -Istm32/include -mcpu=cortex-m3 -mthumb \
|
||||
-DSTM32F4 -DUSPS_F407 -I../libopencm3/include
|
||||
|
||||
LDFLAGS_BOOT = -lopencm3_stm32f4 -Wl,--defsym,_stack=0x20020000 \
|
||||
-Wl,-T,platforms/stm32/f4discovery.ld -nostartfiles -lc -lnosys \
|
||||
-Wl,-Map=mapfile -mthumb -mcpu=cortex-m3 -Wl,-gc-sections \
|
||||
-L../libopencm3/lib
|
||||
LDFLAGS = $(LDFLAGS_BOOT) -Wl,-Ttext=0x8010000
|
||||
|
||||
VPATH += platforms/stm32
|
||||
|
||||
SRC += cdcacm.c \
|
||||
platform.c \
|
||||
traceswo.c \
|
||||
usbuart.c \
|
||||
|
||||
all: blackmagic.bin blackmagic_dfu.bin blackmagic_dfu.hex
|
||||
|
||||
blackmagic.bin: blackmagic
|
||||
$(OBJCOPY) -O binary $^ $@
|
||||
|
||||
blackmagic_dfu: usbdfu.o
|
||||
$(CC) $^ -o $@ $(LDFLAGS_BOOT)
|
||||
|
||||
blackmagic_dfu.bin: blackmagic_dfu
|
||||
$(OBJCOPY) -O binary $^ $@
|
||||
|
||||
blackmagic_dfu.hex: blackmagic_dfu
|
||||
$(OBJCOPY) -O ihex $^ $@
|
||||
|
||||
host_clean:
|
||||
-rm blackmagic.bin blackmagic_dfu blackmagic_dfu.bin blackmagic_dfu.hex
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
Hardware
|
||||
========
|
||||
Find eagle schematics at
|
||||
https://github.com/UweBonnes/wiki_fuer_alex/tree/master/layout
|
||||
The board can be used for F1/L1/F2 and F4 with some changed parts,
|
||||
see the datasheet and hints in the schematic
|
||||
|
||||
JTAG: Reuse the JTAG Connector, unconnect JTAG Tap and reuse JTAG pins
|
||||
in inverse direction.
|
||||
Forced boot request: Connect Jumper Wire X11-34/X11-40 to pull PC15
|
||||
to ground
|
||||
System Bootloader: Jumper Boot0 to '1'
|
||||
|
||||
Led: PB2 (Boot1)
|
||||
|
||||
Application start address:
|
||||
=========================
|
||||
|
||||
Use 0x8010000
|
||||
- lower 3 16 k pages may be used for parameter storage
|
||||
- Erasing a single 64 k Page is faster then erasing 2 16 k Pages
|
||||
eventual the 64 k page
|
||||
|
|
@ -0,0 +1,207 @@
|
|||
/*
|
||||
* This file is part of the Black Magic Debug project.
|
||||
*
|
||||
* Copyright (C) 2011 Black Sphere Technologies Ltd.
|
||||
* Written by Gareth McMullin <gareth@blacksphere.co.nz>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* This file implements the platform specific functions for the STM32
|
||||
* implementation.
|
||||
*/
|
||||
|
||||
#include <libopencm3/stm32/f4/rcc.h>
|
||||
#include <libopencm3/cm3/systick.h>
|
||||
#include <libopencm3/cm3/scb.h>
|
||||
#include <libopencm3/cm3/nvic.h>
|
||||
#include <libopencm3/stm32/exti.h>
|
||||
#include <libopencm3/stm32/usart.h>
|
||||
#include <libopencm3/stm32/syscfg.h>
|
||||
#include <libopencm3/usb/usbd.h>
|
||||
|
||||
#include "platform.h"
|
||||
#include "jtag_scan.h"
|
||||
#include <usbuart.h>
|
||||
|
||||
#include <ctype.h>
|
||||
|
||||
uint8_t running_status;
|
||||
volatile uint32_t timeout_counter;
|
||||
|
||||
jmp_buf fatal_error_jmpbuf;
|
||||
|
||||
static void morse_update(void);
|
||||
|
||||
int platform_init(void)
|
||||
{
|
||||
rcc_clock_setup_hse_3v3(&hse_8mhz_3v3[CLOCK_3V3_168MHZ]);
|
||||
|
||||
/* Enable peripherals */
|
||||
rcc_peripheral_enable_clock(&RCC_AHB2ENR, RCC_AHB2ENR_OTGFSEN);
|
||||
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPAEN);
|
||||
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPBEN);
|
||||
rcc_peripheral_enable_clock(&RCC_AHB1ENR, RCC_AHB1ENR_IOPCEN);
|
||||
|
||||
/* Fix all flaoting pins*/
|
||||
gpio_mode_setup(GPIOA, GPIO_MODE_INPUT, GPIO_PUPD_PULLDOWN,
|
||||
0x1ff);
|
||||
|
||||
gpio_mode_setup(GPIOB, GPIO_MODE_INPUT, GPIO_PUPD_PULLDOWN,
|
||||
0xffe2);
|
||||
|
||||
gpio_mode_setup(GPIOC, GPIO_MODE_INPUT, GPIO_PUPD_PULLDOWN,
|
||||
0xf3ff);
|
||||
|
||||
/* Set up USB Pins and alternate function*/
|
||||
gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE,
|
||||
GPIO9 | GPIO10| GPIO11 | GPIO12);
|
||||
gpio_set_af(GPIOA, GPIO_AF10, GPIO9 | GPIO10| GPIO11 | GPIO12);
|
||||
|
||||
/* Set TMS/TCK/TDI to high speed*/
|
||||
GPIOA_OSPEEDR &=~0xfc00;
|
||||
GPIOA_OSPEEDR |= 0xa800;
|
||||
gpio_mode_setup(JTAG_PORT, GPIO_MODE_OUTPUT,
|
||||
GPIO_PUPD_NONE,
|
||||
TMS_PIN | TCK_PIN | TDI_PIN);
|
||||
|
||||
gpio_mode_setup(TDO_PORT, GPIO_MODE_INPUT,
|
||||
GPIO_PUPD_NONE,
|
||||
TDO_PIN | TRST_PIN);
|
||||
|
||||
gpio_mode_setup(LED_PORT, GPIO_MODE_OUTPUT,
|
||||
GPIO_PUPD_NONE,
|
||||
LED_UART );
|
||||
|
||||
/* Setup heartbeat timer */
|
||||
systick_set_clocksource(STK_CTRL_CLKSOURCE_AHB_DIV8);
|
||||
systick_set_reload(168000000/(10*8)); /* Interrupt us at 10 Hz */
|
||||
SCB_SHPR(11) &= ~((15 << 4) & 0xff);
|
||||
SCB_SHPR(11) |= ((14 << 4) & 0xff);
|
||||
systick_interrupt_enable();
|
||||
systick_counter_enable();
|
||||
|
||||
usbuart_init();
|
||||
|
||||
SCB_VTOR = 0x10000; // Relocate interrupt vector table here
|
||||
|
||||
cdcacm_init();
|
||||
|
||||
jtag_scan(NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void platform_delay(uint32_t delay)
|
||||
{
|
||||
timeout_counter = delay;
|
||||
while(timeout_counter);
|
||||
}
|
||||
|
||||
void sys_tick_handler(void)
|
||||
{
|
||||
if(timeout_counter)
|
||||
timeout_counter--;
|
||||
|
||||
morse_update();
|
||||
}
|
||||
|
||||
|
||||
/* Morse code patterns and lengths */
|
||||
static const struct {
|
||||
uint16_t code;
|
||||
uint8_t bits;
|
||||
} morse_letter[] = {
|
||||
{ 0b00011101, 8}, // 'A' .-
|
||||
{ 0b000101010111, 12}, // 'B' -...
|
||||
{ 0b00010111010111, 14}, // 'C' -.-.
|
||||
{ 0b0001010111, 10}, // 'D' -..
|
||||
{ 0b0001, 4}, // 'E' .
|
||||
{ 0b000101110101, 12}, // 'F' ..-.
|
||||
{ 0b000101110111, 12}, // 'G' --.
|
||||
{ 0b0001010101, 10}, // 'H' ....
|
||||
{ 0b000101, 6}, // 'I' ..
|
||||
{0b0001110111011101, 16}, // 'J' .---
|
||||
{ 0b000111010111, 12}, // 'K' -.-
|
||||
{ 0b000101011101, 12}, // 'L' .-..
|
||||
{ 0b0001110111, 10}, // 'M' --
|
||||
{ 0b00010111, 8}, // 'N' -.
|
||||
{ 0b00011101110111, 14}, // 'O' ---
|
||||
{ 0b00010111011101, 14}, // 'P' .--.
|
||||
{0b0001110101110111, 16}, // 'Q' --.-
|
||||
{ 0b0001011101, 10}, // 'R' .-.
|
||||
{ 0b00010101, 8}, // 'S' ...
|
||||
{ 0b000111, 6}, // 'T' -
|
||||
{ 0b0001110101, 10}, // 'U' ..-
|
||||
{ 0b000111010101, 12}, // 'V' ...-
|
||||
{ 0b000111011101, 12}, // 'W' .--
|
||||
{ 0b00011101010111, 14}, // 'X' -..-
|
||||
{0b0001110111010111, 16}, // 'Y' -.--
|
||||
{ 0b00010101110111, 14}, // 'Z' --..
|
||||
};
|
||||
|
||||
|
||||
const char *morse_msg;
|
||||
static const char * volatile morse_ptr;
|
||||
static char morse_repeat;
|
||||
|
||||
void morse(const char *msg, char repeat)
|
||||
{
|
||||
morse_msg = morse_ptr = msg;
|
||||
morse_repeat = repeat;
|
||||
SET_ERROR_STATE(0);
|
||||
}
|
||||
|
||||
static void morse_update(void)
|
||||
{
|
||||
static uint16_t code;
|
||||
static uint8_t bits;
|
||||
|
||||
if(!morse_ptr) return;
|
||||
|
||||
if(!bits) {
|
||||
char c = *morse_ptr++;
|
||||
if(!c) {
|
||||
if(morse_repeat) {
|
||||
morse_ptr = morse_msg;
|
||||
c = *morse_ptr++;
|
||||
} else {
|
||||
morse_ptr = 0;
|
||||
return;
|
||||
}
|
||||
}
|
||||
if((c >= 'A') && (c <= 'Z')) {
|
||||
c -= 'A';
|
||||
code = morse_letter[c].code;
|
||||
bits = morse_letter[c].bits;
|
||||
} else {
|
||||
code = 0; bits = 4;
|
||||
}
|
||||
}
|
||||
SET_ERROR_STATE(code & 1);
|
||||
code >>= 1; bits--;
|
||||
}
|
||||
|
||||
const char *platform_target_voltage(void)
|
||||
{
|
||||
return "ABSENT!";
|
||||
}
|
||||
|
||||
void assert_boot_pin(void)
|
||||
{
|
||||
/* Flag Bootloader Request by mimicing a pushed USER button*/
|
||||
gpio_mode_setup(GPIOB, GPIO_MODE_OUTPUT,
|
||||
GPIO_PUPD_NONE, GPIO1);
|
||||
gpio_clear(GPIOB, GPIO11);
|
||||
}
|
||||
|
|
@ -0,0 +1,208 @@
|
|||
/*
|
||||
* This file is part of the Black Magic Debug project.
|
||||
*
|
||||
* Copyright (C) 2011 Black Sphere Technologies Ltd.
|
||||
* Written by Gareth McMullin <gareth@blacksphere.co.nz>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* This file implements the platform specific functions for the STM32
|
||||
* implementation.
|
||||
*/
|
||||
#ifndef __PLATFORM_H
|
||||
#define __PLATFORM_H
|
||||
|
||||
#include <libopencm3/stm32/f4/gpio.h>
|
||||
#include <libopencm3/usb/usbd.h>
|
||||
|
||||
#include <setjmp.h>
|
||||
#include <alloca.h>
|
||||
|
||||
#include "gdb_packet.h"
|
||||
|
||||
#define INLINE_GPIO
|
||||
#define CDCACM_PACKET_SIZE 64
|
||||
#define PLATFORM_HAS_TRACESWO
|
||||
#define BOARD_IDENT "Black Magic Probe (USPS_F407), (Firmware 1.5" VERSION_SUFFIX ", build " BUILDDATE ")"
|
||||
#define DFU_IDENT "Black Magic Firmware Upgrade (USPS_F407)"
|
||||
|
||||
extern usbd_device *usbdev;
|
||||
#define CDCACM_GDB_ENDPOINT 1
|
||||
#define CDCACM_UART_ENDPOINT 3
|
||||
|
||||
/* Important pin mappings for STM32 implementation:
|
||||
*
|
||||
* LED0 = PB2
|
||||
|
||||
* TPWR = XXX (input) -- analogue on mini design ADC1, ch8
|
||||
* nTRST = PD0
|
||||
* SRST_OUT = PD1
|
||||
* TDI = PA1
|
||||
* TMS = PA3 (input for SWDP)
|
||||
* TCK = PA8
|
||||
* TDO = PB4 (input)
|
||||
* nSRST = PD2 (input)
|
||||
*
|
||||
* USB cable pull-up: PA8
|
||||
* USB VBUS detect: PB13 -- New on mini design.
|
||||
* Enable pull up for compatibility.
|
||||
* Force DFU mode button: PB1
|
||||
*/
|
||||
|
||||
/* Hardware definitions... */
|
||||
#define JTAG_PORT GPIOA
|
||||
#define TDI_PORT JTAG_PORT
|
||||
#define TMS_PORT JTAG_PORT
|
||||
#define TCK_PORT JTAG_PORT
|
||||
#define TDO_PORT GPIOB
|
||||
#define TMS_PIN GPIO13
|
||||
#define TCK_PIN GPIO14
|
||||
#define TDI_PIN GPIO15
|
||||
#define TDO_PIN GPIO3
|
||||
|
||||
#define SWDIO_PORT JTAG_PORT
|
||||
#define SWCLK_PORT JTAG_PORT
|
||||
#define SWDIO_PIN TMS_PIN
|
||||
#define SWCLK_PIN TCK_PIN
|
||||
|
||||
#define TRST_PORT TDO_PORT
|
||||
#define TRST_PIN GPIO4
|
||||
#define SRST_PORT GPIOB
|
||||
#define SRST_PIN GPIO4
|
||||
|
||||
#define LED_PORT GPIOB
|
||||
#define LED_PORT_UART GPIOB
|
||||
#define LED_UART GPIO2
|
||||
|
||||
#define TMS_SET_MODE() gpio_mode_setup(TMS_PORT, GPIO_MODE_OUTPUT, \
|
||||
GPIO_PUPD_NONE, TMS_PIN);
|
||||
#define SWDIO_MODE_FLOAT() gpio_mode_setup(SWDIO_PORT, GPIO_MODE_INPUT, \
|
||||
GPIO_PUPD_NONE, SWDIO_PIN);
|
||||
|
||||
#define SWDIO_MODE_DRIVE() gpio_mode_setup(SWDIO_PORT, GPIO_MODE_OUTPUT, \
|
||||
GPIO_PUPD_NONE, SWDIO_PIN);
|
||||
|
||||
|
||||
#define USB_DRIVER stm32f107_usb_driver
|
||||
#define USB_IRQ NVIC_OTG_FS_IRQ
|
||||
#define USB_ISR otg_fs_isr
|
||||
/* Interrupt priorities. Low numbers are high priority.
|
||||
* For now USART1 preempts USB which may spin while buffer is drained.
|
||||
* TIM3 is used for traceswo capture and must be highest priority.
|
||||
*/
|
||||
#define IRQ_PRI_USB (2 << 4)
|
||||
#define IRQ_PRI_USBUSART (1 << 4)
|
||||
#define IRQ_PRI_TRACE (0 << 4)
|
||||
|
||||
#define USBUSART USART3
|
||||
#define USBUSART_CR1 USART3_CR1
|
||||
#define USBUSART_IRQ NVIC_USART3_IRQ
|
||||
#define USBUSART_APB_ENR RCC_APB1ENR
|
||||
#define USBUSART_CLK_ENABLE RCC_APB1ENR_USART3EN
|
||||
#define USBUSART_TX_PORT GPIOC
|
||||
#define USBUSART_TX_PIN GPIO10
|
||||
#define USBUSART_RX_PORT GPIOC
|
||||
#define USBUSART_RX_PIN GPIO11
|
||||
#define USBUSART_ISR usart3_isr
|
||||
|
||||
#define UART_PIN_SETUP() do { \
|
||||
gpio_mode_setup(USBUSART_TX_PORT, GPIO_MODE_AF, GPIO_PUPD_NONE, \
|
||||
USBUSART_TX_PIN); \
|
||||
gpio_mode_setup(USBUSART_RX_PORT, GPIO_MODE_AF, GPIO_PUPD_NONE, \
|
||||
USBUSART_RX_PIN); \
|
||||
gpio_set_af(USBUSART_TX_PORT, GPIO_AF7, USBUSART_TX_PIN); \
|
||||
gpio_set_af(USBUSART_RX_PORT, GPIO_AF7, USBUSART_RX_PIN); \
|
||||
} while(0)
|
||||
|
||||
#define TRACE_TIM TIM3
|
||||
#define TRACE_TIM_CLK_EN() rcc_peripheral_enable_clock(&RCC_APB1ENR, RCC_APB1ENR_TIM3EN)
|
||||
#define TRACE_IRQ NVIC_TIM3_IRQ
|
||||
#define TRACE_ISR tim3_isr
|
||||
|
||||
#define DEBUG(...)
|
||||
|
||||
extern uint8_t running_status;
|
||||
extern volatile uint32_t timeout_counter;
|
||||
|
||||
extern jmp_buf fatal_error_jmpbuf;
|
||||
|
||||
extern const char *morse_msg;
|
||||
|
||||
#define gpio_set_val(port, pin, val) do { \
|
||||
if(val) \
|
||||
gpio_set((port), (pin)); \
|
||||
else \
|
||||
gpio_clear((port), (pin)); \
|
||||
} while(0)
|
||||
|
||||
#define SET_RUN_STATE(state) {running_status = (state);}
|
||||
#define SET_IDLE_STATE(state)
|
||||
#define SET_ERROR_STATE(state)
|
||||
|
||||
#define PLATFORM_SET_FATAL_ERROR_RECOVERY() {setjmp(fatal_error_jmpbuf);}
|
||||
#define PLATFORM_FATAL_ERROR(error) { \
|
||||
if(running_status) gdb_putpacketz("X1D"); \
|
||||
else gdb_putpacketz("EFF"); \
|
||||
running_status = 0; \
|
||||
target_list_free(); \
|
||||
morse("TARGET LOST.", 1); \
|
||||
longjmp(fatal_error_jmpbuf, (error)); \
|
||||
}
|
||||
|
||||
int platform_init(void);
|
||||
void morse(const char *msg, char repeat);
|
||||
const char *platform_target_voltage(void);
|
||||
int platform_hwversion(void);
|
||||
void platform_delay(uint32_t delay);
|
||||
|
||||
/* <cdcacm.c> */
|
||||
void cdcacm_init(void);
|
||||
/* Returns current usb configuration, or 0 if not configured. */
|
||||
int cdcacm_get_config(void);
|
||||
int cdcacm_get_dtr(void);
|
||||
|
||||
/* <platform.h> */
|
||||
void uart_usb_buf_drain(uint8_t ep);
|
||||
|
||||
/* Use newlib provided integer only stdio functions */
|
||||
#define sscanf siscanf
|
||||
#define sprintf siprintf
|
||||
#define vasprintf vasiprintf
|
||||
|
||||
#ifdef INLINE_GPIO
|
||||
static inline void _gpio_set(u32 gpioport, u16 gpios)
|
||||
{
|
||||
GPIO_BSRR(gpioport) = gpios;
|
||||
}
|
||||
#define gpio_set _gpio_set
|
||||
|
||||
static inline void _gpio_clear(u32 gpioport, u16 gpios)
|
||||
{
|
||||
GPIO_BSRR(gpioport) = gpios<<16;
|
||||
}
|
||||
#define gpio_clear _gpio_clear
|
||||
|
||||
static inline u16 _gpio_get(u32 gpioport, u16 gpios)
|
||||
{
|
||||
return (u16)GPIO_IDR(gpioport) & gpios;
|
||||
}
|
||||
#define gpio_get _gpio_get
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#define disconnect_usb() do {usbd_disconnect(usbdev,1); nvic_disable_irq(USB_IRQ);} while(0)
|
||||
void assert_boot_pin(void);
|
||||
#define setup_vbus_irq()
|
||||
Loading…
Reference in New Issue