platform: Renamed cdcacm_init -> blackmagic_usb_init

src/platforms/96b_carbon/platform.c

@@ -69,7 +69,7 @@ void platform_init(void)
 
 	platform_timing_init();
 	usbuart_init();
-	cdcacm_init();
+	blackmagic_usb_init();
 }
 
 void platform_nrst_set_val(bool assert)

src/platforms/blackpillv2/platform.c

@@ -108,7 +108,7 @@ void platform_init(void)
 
 	platform_timing_init();
 	usbuart_init();
-	cdcacm_init();
+	blackmagic_usb_init();
 
 	// https://github.com/libopencm3/libopencm3/pull/1256#issuecomment-779424001
 	OTG_FS_GCCFG |= OTG_GCCFG_NOVBUSSENS | OTG_GCCFG_PWRDWN;

src/platforms/common/cdcacm.c

@@ -572,16 +572,13 @@ static void cdcacm_set_config(usbd_device *dev, uint16_t wValue)
 }
 
 /* We need a special large control buffer for this device: */
-uint8_t usbd_control_buffer[256];
+static uint8_t usbd_control_buffer[256];
 
-void cdcacm_init(void)
+void blackmagic_usb_init(void)
 {
-	void exti15_10_isr(void);
-
 	serial_no_read(serial_no);
 
-	usbdev = usbd_init(&USB_DRIVER, &dev_desc, &config, usb_strings,
-			    sizeof(usb_strings)/sizeof(char *),
+	usbdev = usbd_init(&USB_DRIVER, &dev_desc, &config, usb_strings, sizeof(usb_strings) / sizeof(char *),
 		usbd_control_buffer, sizeof(usbd_control_buffer));
 
 	usbd_register_set_config_callback(usbdev, cdcacm_set_config);

src/platforms/common/cdcacm.h

@@ -36,7 +36,7 @@
 #define CDCACM_UART_ENDPOINT	3
 #define TRACE_ENDPOINT			5
 
-void cdcacm_init(void);
+void blackmagic_usb_init(void);
 /* Returns current usb configuration, or 0 if not configured. */
 int cdcacm_get_config(void);
 int cdcacm_get_dtr(void);

src/platforms/f072/platform.c

@@ -84,7 +84,7 @@ void platform_init(void)
 	gpio_set_output_options(NRST_PORT, GPIO_OTYPE_OD,
 							GPIO_OSPEED_2MHZ, NRST_PIN);
 	platform_timing_init();
-	cdcacm_init();
+	blackmagic_usb_init();
 	usbuart_init();
 }
 

src/platforms/f3/platform.c

@@ -88,7 +88,7 @@ void platform_init(void)
 	/* Set up USB Pins and alternate function*/
 	gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO11 | GPIO12);
 	gpio_set_af(GPIOA, GPIO_AF14, GPIO11 | GPIO12);
-	cdcacm_init();
+	blackmagic_usb_init();
 	usbuart_init();
 }
 

src/platforms/f4discovery/platform.c

@@ -107,7 +107,7 @@ void platform_init(void)
 
 	platform_timing_init();
 	usbuart_init();
-	cdcacm_init();
+	blackmagic_usb_init();
 }
 
 void platform_nrst_set_val(bool assert) { (void)assert; }

src/platforms/hydrabus/platform.c

@@ -77,7 +77,7 @@ void platform_init(void)
 
 	platform_timing_init();
 	usbuart_init();
-	cdcacm_init();
+	blackmagic_usb_init();
 }
 
 void platform_nrst_set_val(bool assert) { (void)assert; }

src/platforms/launchpad-icdi/platform.c

@@ -81,7 +81,7 @@ void platform_init(void)
 	__asm__("nop"); __asm__("nop"); __asm__("nop");
 	gpio_mode_setup(GPIOD_BASE, GPIO_MODE_ANALOG, GPIO_PUPD_NONE, GPIO4|GPIO5);
 	usbuart_init();
-	cdcacm_init();
+	blackmagic_usb_init();
 
 	usb_enable_interrupts(USB_INT_RESET | USB_INT_DISCON |
 		USB_INT_RESUME | USB_INT_SUSPEND, 0xff, 0xff);

src/platforms/native/platform.c

@@ -223,7 +223,7 @@ void platform_init(void)
 	SCB_VTOR = (uint32_t)&vector_table;
 
 	platform_timing_init();
-	cdcacm_init();
+	blackmagic_usb_init();
 
 	/* On hardware version 1 and 2, UART and SWD share connector pins.
 	 * Don't enable UART if we're being debugged. */

src/platforms/stlink/platform.c

@@ -80,7 +80,7 @@ void platform_init(void)
 	platform_timing_init();
 	if (rev > 1) /* Reconnect USB */
 		gpio_set(GPIOA, GPIO15);
-	cdcacm_init();
+	blackmagic_usb_init();
 
 #ifdef SWIM_AS_UART
 	gpio_primary_remap(AFIO_MAPR_SWJ_CFG_FULL_SWJ,

src/platforms/swlink/platform.c

@@ -109,7 +109,7 @@ void platform_init(void)
 	SCB_VTOR = (uint32_t)&vector_table;
 
 	platform_timing_init();
-	cdcacm_init();
+	blackmagic_usb_init();
 	usbuart_init();
 }