29386aee14
scripts/stm32_mem: Fix issue with scanning USB DFU devices
...
While scanning the USB bus for devices, stm32_scan() can find a device that it
doesn't have permissions to access it, dfu/usb class raises an exception and
stm32_scan() stops the scan completely.
This fix resolves the scan issue, by allowing the scan loop to continue.
While at it, there are cosmetic fixes related with tabs/spaces and readability.
Signed-off-by: Nikolay Dimitrov <nikolay.dimitrov@retrohub.org>
2018-09-17 14:36:28 +12:00
7908ba526b
stm32_mem: Guard dfu.dfu_device with try/except.
2018-07-18 23:31:55 +02:00
29cdba0d70
SWO: Some explanations and a test program.
2018-03-27 13:40:49 +02:00
0ddd8b55d7
divide-by-zero fix
2018-03-11 14:35:38 -05:00
dc29e45606
stm32_mem: Really wait 5 seconds for DFU device to appear.
2017-10-04 21:53:53 +02:00
2b2b6d8f31
stm32_mem.py: Allow to set start address.
2017-10-02 21:30:56 +02:00
7cc9ee9d7a
stm32_mem.py: Verify after write when bootloader supports upload
...
This should help people using STM32F103C8 above 64 k.
2017-10-02 21:30:56 +02:00
613208c939
stm32_mem: Allow to switch from dfu to application without flashing.
2017-10-02 21:30:56 +02:00
c41dfaef9a
stm32_mem.py: Run automatically after switching to DFU mode.
2017-10-02 21:30:56 +02:00
4f3f4cb898
stm32_mem.py: Deny to work with the STM DFU bootloader
...
To support the STM DFU bootloader, the interface descriptor needs to be
evaluated. Erase may only be called once per sector.
2017-10-02 21:30:56 +02:00
4c6f735452
stm32_mem.py: Handle multiple devices.
2017-10-02 21:30:56 +02:00
1be9c6e9c5
stm32_mem.py: Set address before writing to inhibit bootloader overwrite.
2017-07-22 13:25:48 +02:00
73ac700c6f
Fix gdb.py to program last chunk of a memory range
2017-06-15 16:20:02 +02:00
9141418bd4
Merge pull request #80 from gsmcmullin/hydrabus
...
Add HydraBus support
2016-04-15 13:00:52 -07:00
7d957cbfdf
Update nRF51 IDs, add nRF51422 and xxAB/xxAC devices.
...
There were a lot of nRF51 device ids missing. I wrote a script to pull nRF51 IDs from the openocd repository, which seems to be more up-to-date. The script's output goes in nrf51.c.
2015-12-17 17:50:41 -07:00
97824b7f02
Use git describe for version in generated header file.
2015-04-03 20:21:33 -07:00
9f0c29d329
Add support for HydraBus (tested with SWD with STM32F405 and SWD+JTAG with LPC4330 M0/M4)
2015-03-04 20:22:00 -08:00
7c3c9fdea3
Update python scripts to find user's preferred python binary through env.
2013-05-02 11:32:24 -07:00
530ee15153
Correct upload script for detection of F1/F4 start address.
2013-02-20 10:55:52 +13:00
06c2d52c59
stm32_mem.py: Add exception handler for better diagnosis, as erase on STM32F407 times out
2013-01-21 11:02:44 +01:00
5e71ea3f60
stm32_mem: Allow to select the programmer with the serial number
2013-01-21 11:02:44 +01:00
b52c62266a
Fixed hexprog.py to work with current firmware 'g' packet.
2012-01-30 22:14:31 +13:00
6a6b52bf54
Fixed python scripts for programming target to work on 64-bit machines.
2011-11-12 13:47:50 +13:00
0dfdc25bb2
Added git info to version output.
...
Fixed memory leak in SWD mode.
2011-02-18 13:50:21 +13:00
8b65e8e259
Fixed dfu.py to work with PyUSB 1.0.
2011-02-17 16:48:15 +13:00
4b105beb61
Fixed printed copyright notices in scripts.
...
hexprog.py now defaults to target 1.
2011-02-09 12:06:50 +13:00
69d790fcf6
Added programming scripts.
2011-02-04 20:25:12 +13:00
Nikolay Dimitrov
Uwe Bonnes
jrwhite
Nicolas Schodet
Gareth McMullin
Mark Rages
Benjamin Vernoux
Fergus Noble