libsigrok/hardware/fx2lafw/command.c

/*
 * This file is part of the sigrok project.
 *
 * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <libusb.h>
#include "command.h"
#include "sigrok.h"
#include "sigrok-internal.h"

SR_PRIV int command_get_fw_version(libusb_device_handle *devhdl,
				   struct version_info *vi)
{
	const int ret = libusb_control_transfer (devhdl,
			LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_IN,
			CMD_GET_FW_VERSION, 0x0000, 0x0000,
			(unsigned char*)vi, sizeof(struct version_info),
			100);

	if(ret < 0) {
		sr_err("fx2lafw: Unable to get version info: %d.", ret);
		return SR_ERR;
	}

	return SR_OK;
}

SR_PRIV int command_start_acquisition(libusb_device_handle *devhdl,
				      uint64_t samplerate)
{
	struct cmd_start_acquisition cmd;
	int delay = 0, ret;

	/* Compute the sample rate. */
	if((SR_MHZ(48) % samplerate) == 0) {
		cmd.flags = CMD_START_FLAGS_CLK_48MHZ;
		delay = SR_MHZ(48) / samplerate - 1;
	} else if((SR_MHZ(30) % samplerate) == 0) {
		cmd.flags = CMD_START_FLAGS_CLK_30MHZ;
		delay = SR_MHZ(30) / samplerate - 1;
	}

	/* Note: sample_delay=0 is treated as sample_delay=256. */
	if (delay <= 0 || delay > 256) {
		sr_err("fx2lafw: Unable to sample at %" PRIu64 "Hz.",
		       samplerate);
		return SR_ERR;
	}

	cmd.sample_delay = delay;

	/* Send the control message. */
	ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
			LIBUSB_ENDPOINT_OUT, CMD_START, 0x0000, 0x0000,
			(unsigned char *)&cmd, sizeof(cmd), 100);
	if (ret < 0) {
		sr_err("fx2lafw: Unable to send start command: %d.", ret);
		return SR_ERR;
	}

	return SR_OK;
}