libsigrok/hardware/link-mso19/link-mso19.h

163 lines
4.1 KiB
C
Raw Normal View History

/*
* This file is part of the sigrok project.
*
* Copyright (C) 2011 Daniel Ribeiro <drwyrm@gmail.com>
* Copyright (C) 2012 Renato Caldas <rmsc@fe.up.pt>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef LIBSIGROK_HARDWARE_LINK_MSO19_LINK_MSO19_H
#define LIBSIGROK_HARDWARE_LINK_MSO19_LINK_MSO19_H
/* Structure for the pattern generator state */
struct mso_patgen {
/* Pattern generator clock config */
uint16_t clock;
/* Buffer start address */
uint16_t start;
/* Buffer end address */
uint16_t end;
/* Pattern generator config */
uint8_t config;
/* Samples buffer */
uint8_t buffer[1024];
/* Input/output configuration for the samples buffer (?)*/
uint8_t io[1024];
/* Number of loops for the pattern generator */
uint8_t loops;
/* Bit enable mask for the I/O lines */
uint8_t mask;
};
/* Data structure for the protocol trigger state */
struct mso_prototrig {
/* Word match buffer */
uint8_t word[4];
/* Masks for the wordmatch buffer */
uint8_t mask[4];
/* SPI mode 0, 1, 2, 3. Set to 0 for I2C */
uint8_t spimode;
};
/* Private, per-device-instance driver context. */
struct mso {
/* info */
uint8_t hwmodel;
uint8_t hwrev;
uint32_t serial;
// uint8_t num_sample_rates;
/* calibration */
double vbit;
uint16_t dac_offset;
uint16_t offset_range;
/* register cache */
uint8_t ctlbase1;
uint8_t ctlbase2;
/* state */
uint8_t la_threshold;
uint64_t cur_rate;
uint8_t dso_probe_attn;
uint8_t trigger_chan;
uint8_t trigger_slope;
uint8_t trigger_outsrc;
uint8_t trigger_state;
uint8_t la_trigger;
uint8_t la_trigger_mask;
double dso_trigger_voltage;
uint16_t dso_trigger_width;
struct mso_prototrig protocol_trigger;
void *session_dev_id;
uint16_t buffer_n;
char buffer[4096];
};
/* serial protocol */
#define mso_trans(a, v) \
(((v) & 0x3f) | (((v) & 0xc0) << 6) | (((a) & 0xf) << 8) | \
((~(v) & 0x20) << 1) | ((~(v) & 0x80) << 7))
const char mso_head[] = { 0x40, 0x4c, 0x44, 0x53, 0x7e };
const char mso_foot[] = { 0x7e };
/* bank agnostic registers */
#define REG_CTL2 15
/* bank 0 registers */
#define REG_BUFFER 1
#define REG_TRIGGER 2
#define REG_CLKRATE1 9
#define REG_CLKRATE2 10
#define REG_DAC1 12
#define REG_DAC2 13
/* possibly bank agnostic: */
#define REG_CTL1 14
/* bank 2 registers (SPI/I2C protocol trigger) */
#define REG_PT_WORD(x) (x)
#define REG_PT_MASK(x) (x+4)
#define REG_PT_SPIMODE 8
/* bits - REG_CTL1 */
#define BIT_CTL1_RESETFSM (1 << 0)
#define BIT_CTL1_ARM (1 << 1)
#define BIT_CTL1_ADC_UNKNOWN4 (1 << 4) /* adc enable? */
#define BIT_CTL1_RESETADC (1 << 6)
#define BIT_CTL1_LED (1 << 7)
/* bits - REG_CTL2 */
#define BITS_CTL2_BANK(x) (x & 0x3)
#define BIT_CTL2_SLOWMODE (1 << 5)
struct rate_map {
uint32_t rate;
uint16_t val;
uint8_t slowmode;
};
static struct rate_map rate_map[] = {
{ SR_MHZ(200), 0x0205, 0 },
{ SR_MHZ(100), 0x0105, 0 },
{ SR_MHZ(50), 0x0005, 0 },
{ SR_MHZ(20), 0x0303, 0 },
{ SR_MHZ(10), 0x0308, 0 },
{ SR_MHZ(5), 0x030c, 0 },
{ SR_MHZ(2), 0x0330, 0 },
{ SR_MHZ(1), 0x0362, 0 },
{ SR_KHZ(500), 0x03c6, 0 },
{ SR_KHZ(200), 0x07f2, 0 },
{ SR_KHZ(100), 0x0fe6, 0 },
{ SR_KHZ(50), 0x1fce, 0 },
{ SR_KHZ(20), 0x4f86, 0 },
{ SR_KHZ(10), 0x9f0e, 0 },
{ SR_KHZ(5), 0x03c7, 0x20 },
{ SR_KHZ(2), 0x07f3, 0x20 },
{ SR_KHZ(1), 0x0fe7, 0x20 },
{ 500, 0x1fcf, 0x20 },
{ 200, 0x4f87, 0x20 },
{ 100, 0x9f0f, 0x20 },
};
/* FIXME: Determine corresponding voltages */
static uint16_t la_threshold_map[] = {
0x8600,
0x8770,
0x88ff,
0x8c70,
0x8eff,
0x8fff,
};
#endif