basic config options (WIP)

2021-06-27 04:32:32 +02:00 · 2021-06-27 04:32:32 +02:00 · 19a7aa375a
parent 243b525727
commit 19a7aa375a
4 changed files with 112 additions and 45 deletions
--- a/.gitignore
+++ b/.gitignore
@ -9,6 +9,7 @@
 /m4/libtool.m4
 /m4/lt*.m4
 /build
+/inst

 # Editor/IDE cruft
 *.kate-swp
--- a/src/hardware/ikalogic-scanaquad/api.c
+++ b/src/hardware/ikalogic-scanaquad/api.c
@ -36,26 +36,48 @@ static const uint32_t drvopts[] = {
 };

 static const uint32_t devopts[] = {
-	// * pattern mode: how?
-	// * LIMIT_FRAMES vs LIMIT_SAMPLES?
-	// * VOLTAGE_THRESHSOLD vs LOGIC_THRESHOLD
-	// * VOLTAGE/VOLTAGE_TARGET: max?
-	// * triggers: TRIGGER_SLOPE vs TRIGGER_SOURCE vs TRIGGER_MATCH vs TRIGGER_LEVEL vs TRIGGER_PATTERN
-	//   * TRIGGER_SLOPE: probably dV/dt thing? so not applicable here
-	// * OUTPUT_FREQUENCY used in PATTERN_MODE?
-	// * DATALOG: effect?
-	//SR_CONF_CONN | SR_CONF_GET, // TODO: ???
 	SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
 	SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET,
-	//SR_CONF_PATTERN_MODE | SR_CONF_GET | SR_CONF_SET, // TODO: idk how this works
-	//SR_CONF_BUFFERSIZE | SR_CONF_GET | SR_CONF_SET, // TODO: ???
-	//SR_CONF_LOGIC_THRESHOLD | SR_CONFIG_GET | SR_CONFIG_SET | SR_CONFIG_LIST, // TODO: or VOLTAGE_THRESHOLD?
-	/* TODO: LOGIC_THRESHOLD_CUSTOM ? does the hw support this? */
-	//SR_CONF_OUTPUT_FREQUENCY | SR_CONFIG_GET | SR_CONFIG_SET | SR_CONFIG_LIST, // TODO: is this used??
 	SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET,
 	SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET,
-	/*SR_CONF_LIMIT_FRAMES | SR_CONF_GET | SR_CONF_SET, "frame is a single capture" -> don't use */
-	//SR_CONF_DATALOG // TODO: ????
+	SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+	SR_CONF_LOGIC_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
+	SR_CONF_LOGIC_THRESHOLD_CUSTOM | SR_CONF_GET | SR_CONF_SET,
+
+	/* "frame is a single capture" -> don't use here, not applicable */
+	/*SR_CONF_LIMIT_FRAMES | SR_CONF_GET | SR_CONF_SET,*/
+
+	/*
+	 * TODO:
+	 * * CAPTURE_RATIO: units?: int 0..100
+	 * * LIMIT_MSEC: units?: milliseconds
+	 * * LIMIT_SAMPLES: units?: samples
+	 * * SAMPLERATE: "overdrive" to 200 MHz on SQ50 possible??? yes!
+	 *
+	 * * VOLTAGE_THRESHOLD vs LOGIC_THRESHOLD? LOGIC_THRESHOLD_CUSTOM: ???
+	 *   * VOLTAGE_THRESHOLD: 2 double values, custom selection?
+	 *   * LOGIC_THRESHOLD: selection of (max value) voltages
+	 *   * LOGIC_THRESHOLD_CUSTOM: custom ^
+	 *   * see kingst-la2016/api.c
+	 * * VOLTAGE, VOLTAGE_TARGET: ???
+	 *   * not applicable here
+	 *   * except maybe VOLTAGE_TARGET is, for PATTERN_MODE?
+	 * * BUFFERSIZE: ???
+	 * * DATALOG: ???
+	 * * PATTERN_MODE: ???
+	 *   * string of a pattern name?? so uuuh, fuck (-> filename of blob to upload?)
+	 * * OUTPUT_FREQUENCY: ??? (used in PATTERN_MODE instead of SAMPLERATE?)
+	 *   * not applicable here, for analog stuff only
+	 * * CONN: ???
+	 *   * if you need to specify eg. a serial port. not really applicable here
+	 *     (need to scan by vid:pid)
+	 *
+	 * * trigger stuff aaa (TRIGGER_SOURCE, TRIGGER_MATCH, TRIGGER_LEVEL, TRIGGER_PATTERN)
+	 *   * TRIGGER_SOURCE: probably not useful
+	 *   * TRIGGER_MATCH: on what can we match? (hi, lo, rise, fall) -> LIST only
+	 *   * TRIGGER_LEVEL: seems to be an analog thing, not applicable here
+	 *   * TRIGGER_PATTERN: freeform string
+	 */
 };

 static const char *channel_names[] = {
@ -65,10 +87,22 @@ static const char *channel_names[] = {
 static const uint64_t samplerates[] = {
 	/* TODO: can this be an arbitrary value? at least the settings
 	 *       blob makes it look like it can */
+	/* also, looks like the SQ50 can totally do 100 and 200 MHz... */
+	SR_MHZ(200), SR_MHZ(100),
 	SR_MHZ(50), SR_MHZ(25), SR_MHZ(10), SR_MHZ(5), SR_MHZ(1),
 	SR_KHZ(500), SR_KHZ(250), SR_KHZ(100), SR_KHZ(50), SR_KHZ(10)
 };

+static const char *thresholds[] = {
+	"1.8V", // 0x46 0x1e | 1.8 0.8 ~44%
+	"2.8V", // 0x6e 0x2c | 2.8 1.1 ~40%
+	"3.3V", // 0x81 0x46 | 3.3 1.8 ~55%
+	"3.6V", // 0x8d 0x4f | 3.6 2.0 ~55%
+	"5V"  , // 0xc4 0x72 | 5.0 2.9 ~58%
+	"5VTTL",// 0xc3 0x3b | 5.0 1.5
+	"User" // VOLTAGE_THRESHOLD == LOGIC_THRESHOLD_CUSTOM (?)
+};
+
 static uint64_t dc_samples_to_msec(struct dev_context *dc, uint64_t samples)
 {
 	float msec_per_sample = 1.0f / ((float)dc->samplerate * 0.001f);
@ -84,8 +118,6 @@ static uint64_t dc_msec_to_samples(struct dev_context *dc, uint64_t msec)

 static int dev_clear(const struct sr_dev_driver *di)
 {
-	sr_err("clear");
-
 	return std_dev_clear_with_callback(di, (std_dev_clear_callback)sq_destroy);
 }

@ -100,8 +132,6 @@ static GSList *scan(struct sr_dev_driver *di, GSList *options)

 	(void)options;

-	sr_err("scan");
-
 	if (!(ft = ftdi_new())) {
 		sr_err("Failed to initialize libftdi.");
 		return NULL;
@ -228,8 +258,6 @@ static int dev_open(struct sr_dev_inst *sdi)
 	struct dev_context *dc;
 	int rv;

-	sr_err("open");
-
 	dc = sdi->priv;

 	if (!dc || !dc->ft) return SR_ERR_BUG;
@ -273,23 +301,21 @@ static int dev_close(struct sr_dev_inst *sdi)
 	return SR_OK;
 }

-/* FIXME: "Exception: invalid argument" when launching pulseview?
- *        maybe because of something in the config stuff?*/
-
 static int config_get(uint32_t key, GVariant **data,
 	const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
 {
 	struct dev_context *dc;
+	double rnded;
 	int rv;

 	dc = sdi->priv;

 	(void)cg;

-	sr_err("get");
-
 	if (!dc) return SR_ERR_BUG;

+	rnded = (int)(dc->voltage.thresh * 10.0 / 39.2) * 0.1;
+
 	rv = SR_OK;
 	switch (key) {
 	case SR_CONF_SAMPLERATE:
@ -304,6 +330,15 @@ static int config_get(uint32_t key, GVariant **data,
 	case SR_CONF_CAPTURE_RATIO:
 		*data = g_variant_new_uint64(dc->capture_ratio);
 		break;
+	case SR_CONF_VOLTAGE_THRESHOLD:
+		*data = std_gvar_tuple_double(rnded, rnded + 0.1);
+		break;
+	case SR_CONF_LOGIC_THRESHOLD:
+		*data = g_variant_new_string(thresholds[dc->voltage_idx]);
+		break;
+	case SR_CONF_LOGIC_THRESHOLD_CUSTOM:
+		*data = g_variant_new_double(rnded);
+		break;
 	default:
 		sr_err("%s no conf key %u", __func__, key);
 		rv = SR_ERR_NA;
@ -317,30 +352,50 @@ static int config_set(uint32_t key, GVariant *data,
 	const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
 {
 	struct dev_context *dc;
+	double volt, vlo, vhi;
 	int rv;

 	dc = sdi->priv;

 	(void)cg;

-	sr_err("set");
-
 	if (!dc) return SR_ERR_BUG;

+	if (key == SR_CONF_LOGIC_THRESHOLD_CUSTOM)
+		volt = g_variant_get_double(data);
+
 	rv = SR_OK;
 	switch (key) {
 	case SR_CONF_SAMPLERATE:
 		dc->samplerate = g_variant_get_uint64(data);
 		break;
 	case SR_CONF_LIMIT_MSEC:
+		/*printf("msec = %lu\n", g_variant_get_uint64(data));*/
 		dc->limit_samples = dc_msec_to_samples(dc, g_variant_get_uint64(data));
 		break;
 	case SR_CONF_LIMIT_SAMPLES:
+		/*printf("samples = %lu\n", g_variant_get_uint64(data));*/
 		dc->limit_samples = g_variant_get_uint64(data);
 		break;
 	case SR_CONF_CAPTURE_RATIO:
+		/*printf("ratio = %lu\n", g_variant_get_uint64(data));*/
 		dc->capture_ratio = g_variant_get_uint64(data);
 		break;
+	case SR_CONF_VOLTAGE_THRESHOLD:
+		g_variant_get(data, "(dd)", &vlo, &vhi);
+		volt = 0.5 * (vlo + vhi);
+		/* fallthru! */
+	case SR_CONF_LOGIC_THRESHOLD_CUSTOM:
+		/* in the LOGIC_THRESHOLD_CUSTOM case: see 'if' stmt before switch */
+		dc->voltage_idx = 6; /* user */
+		dc->voltage.thresh = (int)(volt * 39.2);
+		/* emulate vendor software values in a shitty way. not 100% exact but
+		 * oh well. */
+		dc->voltage.level  = (dc->voltage.thresh < 0x30)
+			? (int)(volt * 39.2 / 0.40)
+			: (int)(volt * 39.2 / 0.55);
+		/*printf("voltage: %02x %02x\n", dc->voltage.level, dc->voltage.thresh);*/
+		break;
 	default:
 		sr_err("%s no conf key %u", __func__, key);
 		rv = SR_ERR_NA;
@ -355,8 +410,6 @@ static int config_list(uint32_t key, GVariant **data,
 {
 	int rv;

-	sr_err("list");
-
 	rv = SR_OK;
 	switch (key) {
 	case SR_CONF_DEVICE_OPTIONS:
@ -364,6 +417,12 @@ static int config_list(uint32_t key, GVariant **data,
 	case SR_CONF_SAMPLERATE:
 		*data = std_gvar_samplerates(ARRAY_AND_SIZE(samplerates));
 		break;
+	case SR_CONF_VOLTAGE_THRESHOLD:
+		*data = std_gvar_min_max_step_thresholds(0.8, 2.9, 0.1);
+		break;
+	case SR_CONF_LOGIC_THRESHOLD:
+		*data = g_variant_new_strv(thresholds, ARRAY_SIZE(thresholds));
+		break;
 	default:
 		sr_err("%s no conf key %u", __func__, key);
 		rv = SR_ERR_NA;
@ -380,8 +439,6 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi)

 	dc = sdi->priv;

-	sr_err("start");
-
 	if (!dc || !dc->ft) return SR_ERR_BUG;

 	rv = scanaquad_acquisition_start(dc);
@ -413,7 +470,7 @@ static int dev_acquisition_stop(struct sr_dev_inst *sdi)

 static struct sr_dev_driver ikalogic_scanaquad_driver_info = {
 	.name = "ikalogic-scanaquad",
-	.longname = "Ikalogic ScanaQuad",
+	.longname = "IKALOGIC ScanaQuad",
 	.api_version = 1,
 	.init = std_init,
 	.cleanup = std_cleanup,
--- a/src/hardware/ikalogic-scanaquad/protocol.c
+++ b/src/hardware/ikalogic-scanaquad/protocol.c
@ -32,8 +32,10 @@ SR_PRIV struct dev_context *sq_new(struct ftdi_context *ft)

 	/* some sensible defaults */
 	dc->samplerate = SR_MHZ(25);
-	dc->capture_ratio = 0;
-	dc->voltage = 3.3f;
+	dc->capture_ratio = 10;
+	dc->voltage.level = 0x81; /* 3.3v */
+	dc->voltage.thresh = 0x46; /* 1.8v (3.3v cmos thresh- */
+	dc->voltage_idx = 2; /* "3.3V" */

 	return dc;
 }
@ -575,21 +577,22 @@ SR_PRIV int scanaquad_apply_current_settings(struct dev_context *dc, gboolean pa
 	 * * no triggers
 	 * * set to capture mode(?) */

+	uint64_t samplim;
 	uint32_t ms1, ms2, ms3;
 	struct sq_app_settings sett;

 	/* clockfreq == 100000 / samplerate_kHz */
 	sett.clockfreq = (uint16_t)((100000uLL*1000) / dc->samplerate);
-	sett.voltage[0] = /*floorf(dc->voltage * 39.2f);*/0x81;
-	sett.voltage[1] = passive ? 0x4b : 0x46; /* FIXME: 0x46: hardcoded for 3.3V */
+	sett.voltage[0] = dc->voltage.level;
+	sett.voltage[1] = passive ? 0x4b : dc->voltage.thresh;
 	sett.chanoutmap = 0x0f; /* TODO: hardcoded: all inputs */

-	/* TODO: limit_msec, limit_samples, capture_ratio */
 	/* TODO: more than just capture mode */
-	ms1 = dc->memsize_max;
-	ms2 = dc->memsize_max;
-	/* capture_ratio is currently fixed at 10%... */
-	ms3 = (uint32_t)(dc->memsize_max * (1 - 0.10f));
+	samplim = dc->limit_samples / 4;
+	/* TODO: switch to override this check */
+	ms1 = (samplim > dc->memsize_max) ? dc->memsize_max : samplim;
+	ms2 = (samplim > dc->memsize_max) ? dc->memsize_max : samplim;
+	ms3 = (uint32_t)(dc->memsize_max * (1 - dc->capture_ratio * 0.01));

 	sett.memsetting1[0] = (ms1>> 0) & 0xff;
 	sett.memsetting1[1] = (ms1>> 8) & 0xff;
--- a/src/hardware/ikalogic-scanaquad/protocol.h
+++ b/src/hardware/ikalogic-scanaquad/protocol.h
@ -37,14 +37,20 @@
 * https://git.lain.faith/BLAHAJ/sq50-re/wiki
 */

+struct voltage_setting {
+	uint8_t level;
+	uint8_t thresh;
+};
+
 struct dev_context {
 	struct ftdi_context *ft;

 	/* settings for next capture */
 	uint64_t samplerate;
 	uint64_t limit_samples; /* samples */
-	uint64_t capture_ratio; /* 0..100? MAYBE? */
-	float voltage;
+	uint64_t capture_ratio; /* 0..100 */
+	struct voltage_setting voltage;
+	int16_t voltage_idx;

 	uint32_t trig_instant;