BLAHAJ
/
libsigrok
10
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

asix-sigma: move FPGA commands before register layout declaration 

Move the FPGA commands (which can access registers, and sample memory)
declarations before the register layout declaration. Which then no
longer separates the registers declarations from their bit fields.
Update comments on the register set while we are here.
This commit is contained in:
Gerhard Sittig 2020-05-09 18:59:40 +02:00
parent 07411a605e
commit 7c41c420aa
1 changed files with 38 additions and 25 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
src/hardware/asix-sigma/protocol.h
View File

@ -53,6 +53,44 @@ enum asix_device_type {
ASIX_TYPE_OMEGA,
};
/*
* FPGA commands are 8bits wide. The upper nibble is a command opcode,
* the lower nibble can carry operand values. 8bit register addresses
* and 8bit data values get communicated in two steps.
*/
/* Register access. */
#define REG_ADDR_LOW (0x0 << 4)
#define REG_ADDR_HIGH (0x1 << 4)
#define REG_DATA_LOW (0x2 << 4)
#define REG_DATA_HIGH_WRITE (0x3 << 4)
#define REG_READ_ADDR (0x4 << 4)
#define REG_ADDR_ADJUST (1 << 0) /* Auto adjust register address. */
#define REG_ADDR_DOWN (1 << 1) /* 1 decrement, 0 increment. */
#define REG_ADDR_INC (REG_ADDR_ADJUST)
#define REG_ADDR_DEC (REG_ADDR_ADJUST | REG_ADDR_DOWN)
/* Sample memory access. */
#define REG_DRAM_WAIT_ACK (0x5 << 4) /* Wait for completion. */
#define REG_DRAM_BLOCK (0x6 << 4) /* DRAM to BRAM, plus bank select. */
#define REG_DRAM_BLOCK_BEGIN (0x8 << 4) /* Read first BRAM bytes. */
#define REG_DRAM_BLOCK_DATA (0xa << 4) /* Read full BRAM block. */
#define REG_DRAM_SEL_N (0x1 << 4) /* Bank select, added to 6/8/a. */
#define REG_DRAM_SEL_BOOL(b) ((b) ? REG_DRAM_SEL_N : 0)
/*
* Registers at a specific address can have different meanings depending
* on whether data is read or written. This is why direction is part of
* the programming language identifiers.
*
* The vendor documentation suggests that in addition to the first 16
* register addresses which implement the logic analyzer's feature set,
* there are 240 more registers in the 16 to 255 address range which
* are available to applications and plugin features. Can libsigrok's
* asix-sigma driver store configuration data there, to avoid expensive
* operations (think: firmware re-load).
*/
enum sigma_write_register {
WRITE_CLOCK_SELECT = 0,
WRITE_TRIGGER_SELECT = 1,
@ -85,31 +123,6 @@ enum sigma_read_register {
READ_TEST = 15,
};
/*
* FPGA commands are 8bits wide. The upper nibble is a command opcode,
* the lower nibble can carry operand values. 8bit register addresses
* and 8bit data values get communicated in two steps.
*/
/* Register access. */
#define REG_ADDR_LOW (0x0 << 4)
#define REG_ADDR_HIGH (0x1 << 4)
#define REG_DATA_LOW (0x2 << 4)
#define REG_DATA_HIGH_WRITE (0x3 << 4)
#define REG_READ_ADDR (0x4 << 4)
#define REG_ADDR_ADJUST (1 << 0) /* Auto adjust register address. */
#define REG_ADDR_DOWN (1 << 1) /* 1 decrement, 0 increment. */
#define REG_ADDR_INC (REG_ADDR_ADJUST)
#define REG_ADDR_DEC (REG_ADDR_ADJUST | REG_ADDR_DOWN)
/* Sample memory access. */
#define REG_DRAM_WAIT_ACK (0x5 << 4) /* Wait for completion. */
#define REG_DRAM_BLOCK (0x6 << 4) /* DRAM to BRAM, plus bank select. */
#define REG_DRAM_BLOCK_BEGIN (0x8 << 4) /* Read first BRAM bytes. */
#define REG_DRAM_BLOCK_DATA (0xa << 4) /* Read full BRAM block. */
#define REG_DRAM_SEL_N (0x1 << 4) /* Bank select, added to 6/8/a. */
#define REG_DRAM_SEL_BOOL(b) ((b) ? REG_DRAM_SEL_N : 0)
#define LEDSEL0 6
#define LEDSEL1 7