Add Cyrustek ES51922 DMM chip parser.
This commit is contained in:
Uwe Hermann
parent
21d3d4ee87
commit
fe0c0b98c6
|
|
@ -21,6 +21,7 @@
|
|||
noinst_LTLIBRARIES = libsigrok_hw_common_dmm.la
|
||||
|
||||
libsigrok_hw_common_dmm_la_SOURCES = \
|
||||
es51922.c \
|
||||
fs9721.c \
|
||||
fs9922.c \
|
||||
metex14.c \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,431 @@
|
|||
/*
|
||||
* This file is part of the sigrok project.
|
||||
*
|
||||
* Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
* Cyrustek ES51922 protocol parser.
|
||||
*
|
||||
* Communication parameters: Unidirectional, 19230/7o1
|
||||
*/
|
||||
|
||||
#include <string.h>
|
||||
#include <ctype.h>
|
||||
#include <math.h>
|
||||
#include <glib.h>
|
||||
#include "libsigrok.h"
|
||||
#include "libsigrok-internal.h"
|
||||
|
||||
/* Message logging helpers with driver-specific prefix string. */
|
||||
#define DRIVER_LOG_DOMAIN "es51922: "
|
||||
#define sr_log(l, s, args...) sr_log(l, DRIVER_LOG_DOMAIN s, ## args)
|
||||
#define sr_spew(s, args...) sr_spew(DRIVER_LOG_DOMAIN s, ## args)
|
||||
#define sr_dbg(s, args...) sr_dbg(DRIVER_LOG_DOMAIN s, ## args)
|
||||
#define sr_info(s, args...) sr_info(DRIVER_LOG_DOMAIN s, ## args)
|
||||
#define sr_warn(s, args...) sr_warn(DRIVER_LOG_DOMAIN s, ## args)
|
||||
#define sr_err(s, args...) sr_err(DRIVER_LOG_DOMAIN s, ## args)
|
||||
|
||||
/* Factors for the respective measurement mode (0 means "invalid"). */
|
||||
static const float factors[8][8] = {
|
||||
{1e-4, 1e-3, 1e-2, 1e-1, 1e-5, 0, 0, 0}, /* V */
|
||||
{1e-8, 1e-7, 0, 0, 0, 0, 0, 0}, /* uA */
|
||||
{1e-6, 1e-5, 0, 0, 0, 0, 0, 0}, /* mA */
|
||||
{1e-3, 0, 0, 0, 0, 0, 0, 0}, /* 22A */
|
||||
{1e-4, 1e-3, 1e-2, 1e-1, 1, 0, 0, 0}, /* Manual A */
|
||||
{1e-2, 1e-1, 1, 1e1, 1e2, 1e3, 1e4, 0}, /* Resistance */
|
||||
{1e-2, 1e-1, 0, 1, 1e1, 1e2, 1e3, 1e4}, /* Frequency */
|
||||
{1e-12, 1e-11, 1e-10, 1e-9, 1e-8, 1e-7, 1e-6, 1e-5}, /* Capacitance */
|
||||
};
|
||||
|
||||
static int parse_value(const uint8_t *buf, float *result)
|
||||
{
|
||||
int sign, intval;
|
||||
float floatval;
|
||||
|
||||
/*
|
||||
* Bytes 1-5: Value (5 decimal digits)
|
||||
*
|
||||
* Over limit: "0L." on the display, "22580" as protocol "digits".
|
||||
* (chip max. value is 22000, so 22580 is out of range)
|
||||
*
|
||||
* Example: "OL.", auto-range mega-ohm mode
|
||||
* Hex: 36 32 32 35 38 30 33 31 30 30 32 30 0d 0a
|
||||
* ASCII: 2 2 5 8 0
|
||||
*/
|
||||
if (!strncmp((const char *)&buf[1], "22580", 5)) {
|
||||
sr_spew("Over limit.");
|
||||
*result = INFINITY;
|
||||
return SR_OK;
|
||||
} else if (!isdigit(buf[1]) || !isdigit(buf[2]) ||
|
||||
!isdigit(buf[3]) || !isdigit(buf[4]) || !isdigit(buf[5])) {
|
||||
sr_err("Value contained invalid digits: %02x %02x %02x %02x "
|
||||
"%02x (%c %c %c %c %c).",
|
||||
buf[1], buf[2], buf[3], buf[4], buf[5]);
|
||||
return SR_ERR;
|
||||
}
|
||||
intval = 0;
|
||||
intval += (buf[1] - '0') * 10000;
|
||||
intval += (buf[2] - '0') * 1000;
|
||||
intval += (buf[3] - '0') * 100;
|
||||
intval += (buf[4] - '0') * 10;
|
||||
intval += (buf[5] - '0') * 1;
|
||||
|
||||
floatval = (float)intval;
|
||||
|
||||
/* Note: The decimal point position will be parsed later. */
|
||||
|
||||
/* Byte 7: Sign bit (and other stuff) */
|
||||
sign = ((buf[7] & (1 << 2)) != 0) ? -1 : 1;
|
||||
|
||||
/* Apply sign. */
|
||||
floatval *= sign;
|
||||
|
||||
sr_spew("The display value is %f.", floatval);
|
||||
|
||||
*result = floatval;
|
||||
|
||||
return SR_OK;
|
||||
}
|
||||
|
||||
static int parse_range(uint8_t b, float *floatval,
|
||||
const struct es51922_info *info)
|
||||
{
|
||||
int idx, mode;
|
||||
|
||||
idx = b - '0';
|
||||
|
||||
if (!(idx >= 0 && idx <= 7)) {
|
||||
sr_dbg("Invalid range byte / index: 0x%02x / 0x%02x.", b, idx);
|
||||
return SR_ERR;
|
||||
}
|
||||
|
||||
/* Parse range byte (depends on the measurement mode). */
|
||||
if (info->is_voltage)
|
||||
mode = 0; /* V */
|
||||
else if (info->is_current && info->is_micro)
|
||||
mode = 1; /* uA */
|
||||
else if (info->is_current && info->is_milli)
|
||||
mode = 2; /* mA */
|
||||
else if (info->is_current && !info->is_micro && !info->is_milli)
|
||||
mode = 3; /* 22A */
|
||||
else if (info->is_current && !info->is_auto)
|
||||
mode = 4; /* Manual A */
|
||||
else if (info->is_resistance)
|
||||
mode = 5; /* Resistance */
|
||||
else if (info->is_frequency)
|
||||
mode = 6; /* Frequency */
|
||||
else if (info->is_capacitance)
|
||||
mode = 7; /* Capacitance */
|
||||
else {
|
||||
sr_dbg("Invalid mode, range byte was: 0x%02x.", b);
|
||||
return SR_ERR;
|
||||
}
|
||||
|
||||
if (factors[mode][idx] == 0) {
|
||||
sr_dbg("Invalid factor for range byte: 0x%02x.", b);
|
||||
return SR_ERR;
|
||||
}
|
||||
|
||||
/* Apply respective factor (mode-dependent) on the value. */
|
||||
*floatval *= factors[mode][idx];
|
||||
sr_dbg("Applying factor %f, new value is %f.",
|
||||
factors[mode][idx], *floatval);
|
||||
|
||||
return SR_OK;
|
||||
}
|
||||
|
||||
static void parse_flags(const uint8_t *buf, struct es51922_info *info)
|
||||
{
|
||||
/* Get is_judge and is_vbar early on, we'll need it. */
|
||||
info->is_judge = (buf[7] & (1 << 3)) != 0;
|
||||
info->is_vbar = (buf[11] & (1 << 2)) != 0;
|
||||
|
||||
/* Byte 6: Function */
|
||||
switch (buf[6]) {
|
||||
case 0x3b: /* V */
|
||||
info->is_voltage = TRUE;
|
||||
break;
|
||||
case 0x3d: /* uA */
|
||||
info->is_auto = info->is_micro = info->is_current = TRUE;
|
||||
break;
|
||||
case 0x3f: /* mA */
|
||||
info->is_auto = info->is_milli = info->is_current = TRUE;
|
||||
break;
|
||||
case 0x30: /* 22A */
|
||||
info->is_current = TRUE;
|
||||
break;
|
||||
case 0x39: /* Manual A */
|
||||
info->is_auto = FALSE; /* Manual mode */
|
||||
info->is_current = TRUE;
|
||||
break;
|
||||
case 0x33: /* Resistance */
|
||||
info->is_resistance = TRUE;
|
||||
break;
|
||||
case 0x35: /* Continuity */
|
||||
info->is_continuity = TRUE;
|
||||
break;
|
||||
case 0x31: /* Diode */
|
||||
info->is_diode = TRUE;
|
||||
break;
|
||||
case 0x32: /* Frequency / duty cycle */
|
||||
if (info->is_judge)
|
||||
info->is_frequency = TRUE;
|
||||
else
|
||||
info->is_duty_cycle = TRUE;
|
||||
break;
|
||||
case 0x36: /* Capacitance */
|
||||
info->is_capacitance = TRUE;
|
||||
break;
|
||||
case 0x34: /* Temperature */
|
||||
info->is_temperature = TRUE;
|
||||
if (info->is_judge)
|
||||
info->is_celsius = TRUE;
|
||||
else
|
||||
info->is_fahrenheit = TRUE;
|
||||
/* IMPORTANT: The digits always represent Celsius! */
|
||||
break;
|
||||
case 0x3e: /* ADP */
|
||||
info->is_adp = TRUE;
|
||||
break;
|
||||
default:
|
||||
sr_err("Invalid function byte: 0x%02x.", buf[6]);
|
||||
break;
|
||||
}
|
||||
|
||||
/* Byte 7: Status */
|
||||
/* Bits [6:4]: Always 0b011 */
|
||||
info->is_judge = (buf[7] & (1 << 3)) != 0;
|
||||
info->is_sign = (buf[7] & (1 << 2)) != 0;
|
||||
info->is_batt = (buf[7] & (1 << 1)) != 0; /* Battery low */
|
||||
info->is_ol = (buf[7] & (1 << 0)) != 0; /* Input overflow */
|
||||
|
||||
/* Byte 8: Option 1 */
|
||||
/* Bits [6:4]: Always 0b011 */
|
||||
info->is_max = (buf[8] & (1 << 3)) != 0;
|
||||
info->is_min = (buf[8] & (1 << 2)) != 0;
|
||||
info->is_rel = (buf[8] & (1 << 1)) != 0;
|
||||
info->is_rmr = (buf[8] & (1 << 0)) != 0;
|
||||
|
||||
/* Byte 9: Option 2 */
|
||||
/* Bits [6:4]: Always 0b011 */
|
||||
info->is_ul = (buf[9] & (1 << 3)) != 0;
|
||||
info->is_pmax = (buf[9] & (1 << 2)) != 0; /* Max. peak value */
|
||||
info->is_pmin = (buf[9] & (1 << 1)) != 0; /* Min. peak value */
|
||||
/* Bit 0: Always 0 */
|
||||
|
||||
/* Byte 10: Option 3 */
|
||||
/* Bits [6:4]: Always 0b011 */
|
||||
info->is_dc = (buf[10] & (1 << 3)) != 0;
|
||||
info->is_ac = (buf[10] & (1 << 2)) != 0;
|
||||
info->is_auto = (buf[10] & (1 << 1)) != 0;
|
||||
info->is_vahz = (buf[10] & (1 << 0)) != 0;
|
||||
|
||||
/* Byte 11: Option 4 */
|
||||
/* Bits [6:3]: Always 0b0110 */
|
||||
info->is_vbar = (buf[11] & (1 << 2)) != 0;
|
||||
info->is_hold = (buf[11] & (1 << 1)) != 0;
|
||||
info->is_lpf = (buf[11] & (1 << 0)) != 0; /* Low pass filter on */
|
||||
|
||||
/* Byte 12: Always '\r' (carriage return, 0x0d, 13) */
|
||||
|
||||
/* Byte 13: Always '\n' (newline, 0x0a, 10) */
|
||||
}
|
||||
|
||||
static void handle_flags(struct sr_datafeed_analog *analog,
|
||||
float *floatval, const struct es51922_info *info)
|
||||
{
|
||||
/*
|
||||
* Note: is_micro etc. are not used directly to multiply/divide
|
||||
* floatval, this is handled via parse_range() and factors[][].
|
||||
*/
|
||||
|
||||
/* Measurement modes */
|
||||
if (info->is_voltage) {
|
||||
analog->mq = SR_MQ_VOLTAGE;
|
||||
analog->unit = SR_UNIT_VOLT;
|
||||
}
|
||||
if (info->is_current) {
|
||||
analog->mq = SR_MQ_CURRENT;
|
||||
analog->unit = SR_UNIT_AMPERE;
|
||||
}
|
||||
if (info->is_resistance) {
|
||||
analog->mq = SR_MQ_RESISTANCE;
|
||||
analog->unit = SR_UNIT_OHM;
|
||||
}
|
||||
if (info->is_frequency) {
|
||||
analog->mq = SR_MQ_FREQUENCY;
|
||||
analog->unit = SR_UNIT_HERTZ;
|
||||
}
|
||||
if (info->is_capacitance) {
|
||||
analog->mq = SR_MQ_CAPACITANCE;
|
||||
analog->unit = SR_UNIT_FARAD;
|
||||
}
|
||||
if (info->is_temperature && info->is_celsius) {
|
||||
analog->mq = SR_MQ_TEMPERATURE;
|
||||
analog->unit = SR_UNIT_CELSIUS;
|
||||
}
|
||||
if (info->is_temperature && info->is_fahrenheit) {
|
||||
analog->mq = SR_MQ_TEMPERATURE;
|
||||
analog->unit = SR_UNIT_FAHRENHEIT;
|
||||
}
|
||||
if (info->is_continuity) {
|
||||
analog->mq = SR_MQ_CONTINUITY;
|
||||
analog->unit = SR_UNIT_BOOLEAN;
|
||||
*floatval = (*floatval < 0.0) ? 0.0 : 1.0;
|
||||
}
|
||||
if (info->is_diode) {
|
||||
analog->mq = SR_MQ_VOLTAGE;
|
||||
analog->unit = SR_UNIT_VOLT;
|
||||
}
|
||||
if (info->is_duty_cycle) {
|
||||
analog->mq = SR_MQ_DUTY_CYCLE;
|
||||
analog->unit = SR_UNIT_PERCENTAGE;
|
||||
}
|
||||
|
||||
/* Measurement related flags */
|
||||
if (info->is_ac)
|
||||
analog->mqflags |= SR_MQFLAG_AC;
|
||||
if (info->is_dc)
|
||||
analog->mqflags |= SR_MQFLAG_DC;
|
||||
if (info->is_auto)
|
||||
analog->mqflags |= SR_MQFLAG_AUTORANGE;
|
||||
if (info->is_hold)
|
||||
/*
|
||||
* Note: HOLD only affects the number displayed on the LCD,
|
||||
* but not the value sent via the protocol! It also does not
|
||||
* affect the bargraph on the LCD.
|
||||
*/
|
||||
analog->mqflags |= SR_MQFLAG_HOLD;
|
||||
if (info->is_max)
|
||||
analog->mqflags |= SR_MQFLAG_MAX;
|
||||
if (info->is_min)
|
||||
analog->mqflags |= SR_MQFLAG_MIN;
|
||||
if (info->is_rel)
|
||||
analog->mqflags |= SR_MQFLAG_RELATIVE;
|
||||
|
||||
/* Other flags */
|
||||
if (info->is_judge)
|
||||
sr_spew("Judge bit is set.");
|
||||
if (info->is_batt)
|
||||
sr_spew("Battery is low.");
|
||||
if (info->is_ol)
|
||||
sr_spew("Input overflow.");
|
||||
if (info->is_pmax)
|
||||
sr_spew("pMAX active, LCD shows max. peak value.");
|
||||
if (info->is_pmin)
|
||||
sr_spew("pMIN active, LCD shows min. peak value.");
|
||||
if (info->is_vahz)
|
||||
sr_spew("VAHZ active.");
|
||||
if (info->is_vbar)
|
||||
sr_spew("VBAR active.");
|
||||
if (info->is_lpf)
|
||||
sr_spew("Low-pass filter feature is active.");
|
||||
}
|
||||
|
||||
static gboolean flags_valid(const struct es51922_info *info)
|
||||
{
|
||||
int count;
|
||||
|
||||
/* Does the packet have more than one multiplier? */
|
||||
count = 0;
|
||||
count += (info->is_nano) ? 1 : 0;
|
||||
count += (info->is_micro) ? 1 : 0;
|
||||
count += (info->is_milli) ? 1 : 0;
|
||||
/* Note: No 'kilo' or 'mega' bits per se in this protocol. */
|
||||
if (count > 1) {
|
||||
sr_err("More than one multiplier detected in packet.");
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
/* Does the packet "measure" more than one type of value? */
|
||||
count = 0;
|
||||
count += (info->is_voltage) ? 1 : 0;
|
||||
count += (info->is_current) ? 1 : 0;
|
||||
count += (info->is_resistance) ? 1 : 0;
|
||||
count += (info->is_frequency) ? 1 : 0;
|
||||
count += (info->is_capacitance) ? 1 : 0;
|
||||
count += (info->is_temperature) ? 1 : 0;
|
||||
count += (info->is_continuity) ? 1 : 0;
|
||||
count += (info->is_diode) ? 1 : 0;
|
||||
count += (info->is_duty_cycle) ? 1 : 0;
|
||||
if (count > 1) {
|
||||
sr_err("More than one measurement type detected in packet.");
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
/* Both AC and DC set? */
|
||||
if (info->is_ac && info->is_dc) {
|
||||
sr_err("Both AC and DC flags detected in packet.");
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
SR_PRIV gboolean sr_es51922_packet_valid(const uint8_t *buf)
|
||||
{
|
||||
struct es51922_info info;
|
||||
|
||||
memset(&info, 0x00, sizeof(struct es51922_info));
|
||||
parse_flags(buf, &info);
|
||||
|
||||
if (!flags_valid(&info))
|
||||
return FALSE;
|
||||
|
||||
if (buf[12] != '\r' || buf[13] != '\n') {
|
||||
sr_spew("Packet doesn't end with \\r\\n.");
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
return TRUE;
|
||||
}
|
||||
|
||||
/**
|
||||
* Parse a protocol packet.
|
||||
*
|
||||
* @param buf Buffer containing the protocol packet. Must not be NULL.
|
||||
* @param floatval Pointer to a float variable. That variable will contain the
|
||||
* result value upon parsing success. Must not be NULL.
|
||||
* @param analog Pointer to a struct sr_datafeed_analog. The struct will be
|
||||
* filled with data according to the protocol packet.
|
||||
* Must not be NULL.
|
||||
* @param info Pointer to a struct es51922_info. The struct will be filled
|
||||
* with data according to the protocol packet. Must not be NULL.
|
||||
*
|
||||
* @return SR_OK upon success, SR_ERR upon failure. Upon errors, the
|
||||
* 'analog' variable contents are undefined and should not be used.
|
||||
*/
|
||||
SR_PRIV int sr_es51922_parse(const uint8_t *buf, float *floatval,
|
||||
struct sr_datafeed_analog *analog, void *info)
|
||||
{
|
||||
int ret;
|
||||
struct es51922_info *info_local;
|
||||
|
||||
info_local = (struct es51922_info *)info;
|
||||
|
||||
if ((ret = parse_value(buf, floatval)) != SR_OK) {
|
||||
sr_err("Error parsing value: %d.", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
memset(info_local, 0x00, sizeof(struct es51922_info));
|
||||
parse_flags(buf, info_local);
|
||||
handle_flags(analog, floatval, info_local);
|
||||
|
||||
return parse_range(buf[0], floatval, info_local);
|
||||
}
|
||||
|
|
@ -170,6 +170,23 @@ SR_PRIV GSList *sr_usb_find(libusb_context *usb_ctx, const char *conn);
|
|||
SR_PRIV int sr_usb_open(libusb_context *usb_ctx, struct sr_usb_dev_inst *usb);
|
||||
#endif
|
||||
|
||||
/*--- hardware/common/dmm/es51922.c -----------------------------------------*/
|
||||
|
||||
#define ES51922_PACKET_SIZE 14
|
||||
|
||||
struct es51922_info {
|
||||
gboolean is_judge, is_vbar, is_voltage, is_auto, is_micro, is_current;
|
||||
gboolean is_milli, is_resistance, is_continuity, is_diode, is_lpf;
|
||||
gboolean is_frequency, is_duty_cycle, is_capacitance, is_temperature;
|
||||
gboolean is_celsius, is_fahrenheit, is_adp, is_sign, is_batt, is_ol;
|
||||
gboolean is_max, is_min, is_rel, is_rmr, is_ul, is_pmax, is_pmin;
|
||||
gboolean is_dc, is_ac, is_vahz, is_hold, is_nano, is_kilo, is_mega;
|
||||
};
|
||||
|
||||
SR_PRIV gboolean sr_es51922_packet_valid(const uint8_t *buf);
|
||||
SR_PRIV int sr_es51922_parse(const uint8_t *buf, float *floatval,
|
||||
struct sr_datafeed_analog *analog, void *info);
|
||||
|
||||
/*--- hardware/common/dmm/fs9922.c ------------------------------------------*/
|
||||
|
||||
SR_PRIV int sr_dmm_parse_fs9922(const uint8_t *buf, float *floatval,
|
||||
|
|
|
|||
Loading…
Reference in New Issue