ec5186f936
hardware/common/dmm: Fix debug output level.
...
Most messages from the DMM parsers are not hard errors, lower to
sr_dbg() so that the sigrok-cli output doesn't get cluttered (by default)
with debug output such as:
P1: 0.001100 V DC AUTO
sr: fs9721: Sync nibble in byte 0 (0x00) is invalid.
P1: 0.001100 V DC AUTO
(using -l 4 or -l 5 will still allow the user to see such messages)
2014-01-06 20:44:44 +01:00
48d3238e66
serial: Improved docs.
2014-01-03 20:08:04 +01:00
8ae157d976
scpi_usbtmc: fix reading of blocks bigger than the 2048 bytes buffer
2014-01-03 17:54:47 +01:00
d327972b97
Add initial support for the V&A VA40B multimeter.
2014-01-02 01:46:15 +01:00
35b904a792
es519xx.c: Fix a few compiler warnings (clang).
...
CC libsigrok_hw_common_dmm_la-es519xx.lo
es519xx.c:632:33: warning: missing field 'is_voltage' initializer
[-Wmissing-field-initializers]
struct es519xx_info info = { 0 };
^
es519xx.c:659:33: warning: missing field 'is_voltage' initializer
[-Wmissing-field-initializers]
struct es519xx_info info = { 0 };
^
es519xx.c:688:33: warning: missing field 'is_voltage' initializer
[-Wmissing-field-initializers]
struct es519xx_info info = { 0 };
^
es519xx.c:717:33: warning: missing field 'is_voltage' initializer
[-Wmissing-field-initializers]
struct es519xx_info info = { 0 };
^
es519xx.c:746:33: warning: missing field 'is_voltage' initializer
[-Wmissing-field-initializers]
struct es519xx_info info = { 0 };
^
es519xx.c:773:33: warning: missing field 'is_voltage' initializer
[-Wmissing-field-initializers]
struct es519xx_info info = { 0 };
^
es519xx.c:800:33: warning: missing field 'is_voltage' initializer
[-Wmissing-field-initializers]
struct es519xx_info info = { 0 };
^
7 warnings generated.
2013-12-31 19:20:51 +01:00
9a47421157
Add blocking and nonblocking versions of serial_read and serial_write.
2013-12-30 14:19:39 +01:00
cb410697fb
remove the es51922 protocol parser, superseded by the es519xx protocol parser
2013-12-29 18:46:08 +01:00
29bad967a4
es519xx: correctly handle the VAHZ function
...
This handles the frequency and duty cycle display in voltage or current mode.
2013-12-29 18:46:08 +01:00
c3e871dc8e
es519xx: apply the proper fixed factor in duty cycle mode
2013-12-29 18:46:08 +01:00
e1f9f1e1f2
es519xx: fix switching between frequency and duty cycle mode on 14 bytes chips
...
Here is what the datasheet says about this:
"If judge bit is 1, it means frequency mode. If judge bit is 0,
it means duty cycle mode."
But this is plain wrong. Reality proves this is the other way around.
2013-12-29 18:46:08 +01:00
4d2630e63a
es519xx: correctly handle the voltage factor in diode mode
2013-12-29 18:46:08 +01:00
a7c01629f6
es519xx: fix continuity mode handling
...
Depending on the chip, the limit value for the buzzer is between 25 and 35 Ω,
so this code set the limit for continuity to 25 Ω to be on the safe side.
2013-12-29 18:46:03 +01:00
bc7b7eb196
scpi: Strip trailing newline from *IDN response if present.
2013-12-29 13:22:31 +01:00
05c644ea08
Revise SCPI read API to allow backend-independent data handling.
2013-12-29 04:26:36 +01:00
77c16c0463
scpi: Log IDN? result.
2013-12-29 00:26:54 +01:00
b95dd7619d
log prefixes: Cosmetics, consistency fixes, typo fixes.
2013-12-27 13:17:20 +01:00
3544f848e0
Centralise duplicated logging helper defines.
2013-12-27 12:54:05 +01:00
34ea7f9695
Windows usb: don't try to resume thread if shut down in callback.
2013-12-22 17:38:24 +00:00
6640324f7f
usb: Enforce that there can only be one USB event source for now.
2013-12-22 17:27:13 +00:00
b5328e1dfa
Windows usb: Unlock mutex when shutting down wait thread.
2013-12-22 17:10:57 +00:00
589edd9b81
Winsock2.h must be included before anything that includes Winsock.h.
2013-12-22 14:59:43 +00:00
5321ac6b52
Implement usb_source_add and usb_source_remove for Windows.
2013-12-22 07:16:56 +00:00
6c60facc19
Use common usb_source_add and usb_source_remove functions.
2013-12-21 23:09:23 +00:00
ba1949f583
Use new libserialport event set API to make GPollFDs for serial sources.
2013-12-21 19:38:45 +00:00
95ecc76546
bbcgm-m2110: Minor cosmetics.
2013-12-19 00:40:31 +01:00
825da8b20f
serial-dmm: Add BBC Goerz Metrawatt M2110 DMM driver.
2013-12-19 00:40:31 +01:00
cb7b165b3d
serial.c: Show both error code and error message.
...
This is helpful in many cases, e.g. when trying to identify which of the
16000 system error codes from
http://msdn.microsoft.com/en-us/library/ms681381%28VS.85%29.aspx
has been encountered (which is not trivial if you only have an,
e.g. German, string message alone).
2013-12-17 17:46:24 +01:00
04cb915716
Improved doxygen docs.
2013-12-09 15:17:17 +01:00
b6eb8252e5
Remove now-unused fd field from struct sr_serial_dev_inst.
2013-12-07 19:43:47 +00:00
64ecf7ee52
Eliminate internal usage of serial->fd in serial.c.
2013-12-07 19:43:47 +00:00
a0a4c0fb09
Use sp_get_port_handle to get an fd for adding/removing serial sources.
2013-12-07 19:43:47 +00:00
7faa3e8821
Route sr_source_remove for all serial devices through a wrapper.
2013-12-07 19:43:47 +00:00
abc4b3356d
Route sr_source_add for all serial devices through a serial_source_add wrapper.
2013-12-07 19:43:47 +00:00
721fc2272e
scpi_serial: Iterate serial_write as necessary to send full commands.
2013-12-07 19:43:47 +00:00
0f4a435057
scpi_tcp: must define _WIN32_WINNT to 0x0501 or higher to get getaddrinfo().
2013-12-06 03:24:30 +00:00
987a053084
scpi_tcp: Fix building on Windows.
2013-12-06 02:33:05 +01:00
91e406b921
scpi/usbtmc: Prototype fixes.
2013-12-05 00:16:11 +01:00
bc03a7cc2c
scpi/serial: Use stubs for all SCPI functions.
...
Avoids some gcc warnings, since the SCPI prototypes don't exactly
match serial_*.
2013-12-05 00:09:34 +01:00
b8705e99e4
scpi_tcp: Adjust to observed protocol for Rigol VS5000 series.
2013-12-04 21:32:47 +00:00
08a359138b
Add implementation for SCPI over TCP.
2013-12-04 20:59:20 +00:00
9dfeb81b09
scpi_serial: Flush buffers after opening port.
2013-12-04 13:03:23 +00:00
87c410830d
Add sr_scpi_send_variadic() function.
2013-12-04 10:53:51 +00:00
504f40a574
Make sr_scpi_send() take printf-style arguments.
2013-12-04 10:30:43 +00:00
a1ff9c1897
Add sr_scpi_read() operation for reading arbitrary data.
2013-12-03 23:18:37 +00:00
31034792da
Implement SCPI over USBTMC.
2013-12-03 22:25:33 +00:00
23f43dff15
Make SCPI functions device independent, with separate serial backend.
2013-12-03 22:00:31 +00:00
d5976d8be5
scpi.c: Minor cleanups, cosmetics.
2013-12-03 16:08:59 +01:00
1bd9e678ac
serial: Add function to extract serial options.
...
This patch adds a function for a common operation of all serial based drivers.
It extracts the serial options from the options linked list that is passed down
to every hardware driver.
2013-12-03 15:10:01 +01:00
1a323dd887
scpi: Add function to fetch uint8_t.
...
This patch adds a function to read and parse a SCPI response which contains a
comma separated list of unsignet 8-bit integer numbers (e.g "1,0,64").
This is particularly useful if the instrument sends digital measurement data
in this format.
2013-12-03 15:10:01 +01:00
8acbb89a1d
scpi: Add function to get an array of floats.
...
This patch adds a function to read and parse a SCPI response which contains a
comma-separated list of floating-point numbers (e.g. "1.0e-5,2.0e-4,3.0e-3").
This is particularly useful if the instrument sends analog measurement
data in this format.
2013-12-03 15:10:01 +01:00
Uwe Hermann
Matthias Heidbrink
Aurelien Jacobs
Martin Ling
Matthias Heidbrink
Bert Vermeulen
poljar (Damir Jelić)
poljar (Damir Jelić)