With this driver it is possible to set voltage target and current
limit. Also enabling and disabling the output is possible.
Analog output sends read back values from output. If output is
disabled analog outputs 0.00.
In protocol.c there is a g_usleep() call. This gives almost
every time enough time for PSU to parse and process input.
Multichannel devices aren't supported.
Instead of using a non-standard packed attribute, read the contents of the
probe EEPROM into a buffer and then process it using the R* macros.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Standard integer types may differ in size on different targets. Use fixed-size
types instead.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The hard-coded location is bound to be wrong anyway. Instead, rely
on the new resource lookup code to find the firmware files in a
location relative to the library or executable.
SR_CONF_NUM_LOGIC_CHANNELS is defined as SR_T_INT32. Create the
GVariant with the correct type to avoid a type mismatch error in
sr_variant_type_check().
The resource API provides a generic means for accessing resources
that are bundled with sigrok, such as device firmware files. Since
the manner of resource bundling is platform-dependent, users of
libsigrok may override the functions used to open, close and read
a resource. The default implementation accesses resources as files
located in one of the XDG data directories or a directory defined
at compile time.
Use in-memory buffers instead of temporary files. This avoids
the need for low-level I/O on the FD returned by g_mkstemp().
Refactor the code accordingly. Also plug a number of leaks and
tighten the error checking.
Completely remove the old session save code that has been
superseded by the srzip output module. Also refactor a bit,
plug a number of leaks and tighten the error checking.
Introduce the sr_file_get_size() utility function to retrieve the
size of an open FILE stream. This is based on fseeko() followed by
ftello(), which are POSIX functions but quite portable in practice.
Since these calls operate on FILE streams instead of filenames, the
issue of filename encoding no longer arises.
Do not use Unix low-level I/O for reading a regular input file.
Read in the file header once and re-use the buffer for all input
modules participating in the scan. Also re-use a prefilled metadata
table instead of creating it anew for each input module tried.
This fixes parts of bug #423.
The list of fixed warnings:
src/output/srzip.c:285:3: warning: Value stored to 'ret' is never read
ret = zip_append(o, logic->data, logic->unitsize, logic->length);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/scpi/scpi.c:610:2: warning: Value stored to 'ret' is never read
ret = SR_OK;
^ ~~~~~
src/scpi/scpi.c:667:2: warning: Value stored to 'ret' is never read
ret = SR_OK;
^ ~~~~~
src/dmm/vc870.c:410:2: warning: Value stored to 'info_local' is never read
info_local = (struct vc870_info *)info;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~
src/hardware/conrad-digi-35-cpu/api.c:130:2: warning: Value stored to 'ret' is never read
ret = SR_OK;
^ ~~~~~
src/hardware/fx2lafw/api.c:658:2: warning: Value stored to 'timeout' is never read
timeout = fx2lafw_get_timeout(devc);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~
src/hardware/gmc-mh-1x-2x/protocol.c:941:3: warning: Value stored to 'retc' is never read
retc = SR_ERR_ARG;
^ ~~~~~~~~~~
src/hardware/gmc-mh-1x-2x/api.c:168:2: warning: Value stored to 'model' is never read
model = METRAHIT_NONE;
^ ~~~~~~~~~~~~~
src/hardware/ikalogic-scanalogic2/api.c:325:2: warning: Value stored to 'ret' is never read
ret = SR_OK;
^ ~~~~~
src/hardware/openbench-logic-sniffer/api.c:185:3: warning: Value stored to 'devc' is never read
devc = sdi->priv;
^ ~~~~~~~~~
src/hardware/rigol-ds/api.c:813:3: warning: Value stored to 'devc' is never read
devc = sdi->priv;
^ ~~~~~~~~~
src/hardware/scpi-pps/api.c:405:2: warning: Value stored to 'ret' is never read
ret = SR_OK;
^ ~~~~~
src/hardware/yokogawa-dlm/api.c:239:2: warning: Value stored to 'ret' is never read
ret = SR_ERR_NA;
^ ~~~~~~~~~
Timer intervals shorter than about 100 ms are unnecessarily taxing
on system resources. Also, on systems like Windows the smallest
resolvable time unit without using high precision timers is about
15 ms. Regular timer intervals should be well above that value to
avoid being dominated by noise and round-off.
Firmware versions starting with 00.02.04 apparently cause the in and out
bulk endpoints to end up in a HALT state. This is likely related to the
larger transfer size quirk implemented in the Linux kernel for the Rigol
DS1000: this USBTMC implementation does not have that workaround.
Instead, if the firmware version is >= 00.02.04, both endpoints have the HALT
condition cleared on device close.
This fixes bug #354.
The wrong byte was being used to test for the nano indicator.
This resulted in reported resistance and capacitance readings being off
by orders of magnitude.
This fixes bug #657.
The check for p == q is basically checking whether p/q == 1. We should
be normalising the rational before it gets here though, so in this case
we should have p == q == 1 here.
Daniel Elstner
Karl Palsson
Uwe Hermann
Hannu Vuolasaho
Bartosz Golaszewski
Martin Lederhilger
Bert Vermeulen
Scott Allen
Martin Ling
Aurelien Jacobs