The strcasestr() function is non-portable (e.g. not available on
MinGW, possibly elsewhere). Replace it with g_strstr_len() for the time
being. While the latter is not case-insensitive it appears that
that property doesn't matter here ("." should not be relevant anyway,
and e.g. an SDS1202X-E does indeed report "Mpts" as such).
Should it become necessary to have this code be case-insensitive,
we'll have to find a more portable solution than strcasestr().
This causes some compile errors on platforms where RPC is not available, e.g.
siglent-sds/api.c:25:21: fatal error: rpc/rpc.h: No such file or directory
Surrounding the #include (and later code) with "#if HAVE_RPC" should avoid
these compile errors, but since it's not used at all for now, drop it.
Make the USB reset for USB TMC devices conditional. Check a whitelist,
which in this implementation exclusively contains the Siglent VID.
The whitelist's comment may need adjustment. The VID probably not only
applies to SDS devices, but could be used for SDG and others as well.
And lsusb output suggests the VID is used by Atten, too.
Add the Siglent's VID to a list of blacklisted USB TMC devices.
Unconditionally reset USB devices in the open routine.
This was taken from marchel's development for Siglent SDS. Though the
reset should probably be conditional, and only get applied to devices
which are known to need it.
The comment may need adjustment, maybe individual PID entries are
required. The VID probably not only applies to SDS devices, but could
be used for SDG and other gear as well. And lsusb output suggests the
VID is used by Atten, too.
Implement a first version of the driver for the Siglent SDS1000 and
SDS2000 oscilloscopes.
[ gsi: This commit corresponds to git 0228126017e6 of marchelh's tree,
I adjusted the source to closer match the project's coding style. The
conversion was verified by this command:
$ git diff --word-diff=color -w -b <branch>:<dir> <branch>:<dir>
Changes include: Whitespace adjustment, dead code removal, separation
of variable declaration and assignment, alpha-sorted includes. Line
length was not addressed and not every location got adjusted, to keep
the diff minimal and to reduce effort during review of this version. ]
Check for successful allocation before accessing struct members. Return
with an error from device initialization when allocation fails.
This was reported by clang's scan-build.
Make sure to release the allocated "pod enabled" memory, too, when SCPI
communication during channel setup fails. Defer the return with an error
(instead of duplicating the free() invocation).
This was reported by clang's scan-build.
The compiler marks a potential use after free, which the current
implementation won't trigger. The error only occurs when a sigrok
channel is neither logic nor analog.
Address the issue nevertheless, to silence the compiler warning, and to
protect against possible programming errors when a future implementation
should support more channel types.
This was reported by clang's scan-build.
Fixup unbalanced braces for more complex if statements, to better
reflect the project's official coding style.
Adjust data types in the float_to_le() routine. A float value gets
copied to a buffer of bytes (uint8_t). Don't use 'char' on the other
side of assignments, to not assume a specific width for char, and to
avoid potential signedness issues. Copy from bytes to bytes instead.
The WAV output module supports an optional 'scale' factor, in its
absence the samples will pass unmodified. The builtin help text is
unexpected, and reads:
$ sigrok-cli -O wav --show
...
Options:
scale: Scale values by factor (default 0.0)
Setup a default scale factor of 1.0, which results in identical
behaviour and better reflects what is happening.
The previous implementation only emitted data for the first enabled
channels, and "saw no changes" after emission of the initial value for
channels on positions that followed a disabled channel.
Assume that the received data from the session bus communicates the bits
of enabled channels in a packed representation. Skip the mapping of
output bit indices to sigrok channel numbers.
This fixes the remaining part of bug #519.
Tested by inspecting in gtkwave the result of command:
$ sigrok-cli -d demo -C D1,D3,D6 -c samplerate=2M --samples 2500 -O vcd -o trace.vcd
When we find that all input sources (device drivers, and input modules)
provide a dense bit field, all of the mapping logic can get removed
here. This commit just quickly disables the logic.
Identifiers for channels in the VCD header section could be "sparse"
when sigrok channels were disabled. Make sure to not assign names to
disabled channels. This will e.g. assign !, ", and # to channels D1, D3,
and D6, when D0, D2, D4-D5, and D7 are disabled.
This addresses part of bug #519.
Few DMM drivers already did it. This commit adjusts the remaining DMM
drivers, to set the "DC" flag for measurements in diode mode.
This fixes bug #144.
Although I don't have the hardware to test, the nature of the change and
the arrangement of driver code suggests it's good. When a meter already
communicated the "DC" status, the change does nothing and won't harm.
The change ensures "DC" is flagged for those meters which previously
didn't, which is desirable.
Some SCPI based drivers fail to convert response data, because strutil
conversion helpers sr_atol() and sr_atof() don't like trailing spaces
after the number's text that successfully got converted.
It's yet to get determined whether all call sites of the conversion
routines like their eating adjacent whitespace. But given that the
conversion routine explicitly checks for end of the string after the
number, no call site should expect or even depend on trailing text to
keep its whitespace.
See bug #788 for a discussion and example data.
Synchronize sr_parse_sizestring() with sr_si_string_u64() capabilities.
Add support for the T/P/E suffixes. Since this conversion helper deals
with integer values exclusively, there is no issue with case insensitive
matches. The value cannot be pico. Neither is there an ambiguity with
the 10e6 notation.
This addresses bug #763.
Fix a style nit while we are here. Put braces around both arms of a
complex conditional.
Explicitly assign NULL to param to avoid the "may be used uninitialized"
warning reported in bug #1094. Behaviour remains unchanged. All references
to the variable were under "if (!conn)", and the assigning arm of the
branch checked for "if (!param)" after assignment. So the error could
not happen, but compilers may not have noticed depending on the width of
their scope during compilation.
Move the initialization of 'conn' closer to the conditional assignment,
such that all paths are seen in one spot during maintenance.
This fixes bug #1094.
Although log messages are terminated by a line feed, output still might
get buffered when the program does not talk to a terminal (that it is
aware of). Add an fflush(3) call to the printf(3) sequence such that log
output will immediately show up when writing to pipes or sockets, too.
Early sr_init() steps can just 'return' fine. After allocation of the
'context' memory, make all error paths 'goto done' before returning,
to undo the memory allocation.
The srzip output module dropped support for the "filename" option in
commit 37875f7506 on 2015-07-30, but still used to assign to slot
options[0] which clobbers the array's sentinel. Remove those accesses
to the non-existing option.
api.c: In function 'config_set':
api.c:352:5: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'uint64_t' [-Wformat=]
sr_err("invalid sample range 2k...64M: %ld",
^
beaglelogic_tcp.c: In function 'beaglelogic_tcp_send_cmd':
beaglelogic_tcp.c:114:3: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' [-Wformat=]
sr_dbg("Only sent %d/%lu bytes of command: '%s'.", out,
^
Check pointers' validity before dereferencing them. Release partially
allocated memory in an error path. Remove an assignment which never took
effect.
This was reported by clang's scan-build.
Each code path either assigns to 'flags', or leaves the routine. There
is no potential path that leaves the variable at the initially assigned
value, so the assignment took no effect. Remove it.
Nit: Trim the source code line length while we are here.
This was reported by clang's scan-build.
Check pointers' validity before dereferencing them. Explicitly assign a
default value to variables, before conversion routines conditionally
assign the "real" value (and don't in case of conversion errors). This
avoids processing "garbage" data.
Strictly speaking I cannot see how the conversion routine returns OK and
has _not_ assigned a result. But the explicit assignment won't harm
either, and matches the fallback when the conversion fails (detectibly).
Which means that runtime behaviour won't change.
This was reported by clang's scan-build.
Remove an assignment that won't take effect. Check pointers' validity
before dereferencing. Fix a memory leak.
This was reported by clang's scan-build.
Check for successful allocation of multiple memory ranges, and release
partial allocations in the error path when one of them failed. This
fixes a potential memory leak, as well as avoids NULL dereferences.
This was reported by clang's scan-build.
Silence warnings about assigned values that never get used, potential
NULL deference, and potential memory leaks.
This was reported by clang's scan-build.
The scan_2x_bd232() routine used to always prepare one spare context,
and filled it in when a device was found, just to allocate another one
and continue scanning.
Free the last allocated context unconditionally, as it was allocated
unconditionally, and never used.
This was reported by clang's scan-build.
Stick with the prepared but unfinished "limit msec" code path, but
silence the warning about an unused variable value.
This was reported by clang's scan-build.
Avoid a division by zero, by not using a zero unitsize in a modulo
operation. As a byproduct, avoid processing and counting input that
neither has analog nor logic data. This should never have happened,
but the change now catches the error if invalid input is seen.
This was reported by clang's scan-build.
The sr_packet_copy() routine could have written to an arbitrary memory
location. Make sure to allocate the space before writing to it, and
check for successful allocation before accessing the memory.
It's assumed that this error never took effect, as the routine appears
to be unused.
This was reported by clang's scan-build.
The 'opc' variable was only conditionally assigned to (depends on
successful SCPI communication). Ensure there always is a known value.
This was reported by clang's scan-build.
After the first capture ->num_frames never got to be _equal_
to ->limit_frames; fixed by resetting to zero in dev_acquisition_stop(),
and protected against similar problems in the future by switching to
greater-or-equal instead.
[Note: This patch is basically a squashed version of the initial driver
commits by Andreas Zschunke <andreas.zschunke@gmx.net>, two fixes by
Andrej Valek <andy@skyrain.eu>, and various coding style / cosmetic
fixes by Uwe Hermann <uwe@hermann-uwe.de> to make the driver a lot more
consistent with the rest of the libsigrok code-base.]
When refactoring the code, some places where sr_scpi_send was replaced
by rigol_ds_config_set the first argument was not changed from sdi->conn
to sdi. Fix the remaining ones.
Fix: https://sigrok.org/bug/1073
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
This regression was introduced in f1ba6b4b2c.
Due to how the sysclk-lwla driver does up to 3 open/close operations in
one dev_open() API callback we cannot rely on the sr_dev_open() and
sr_dev_close() wrappers setting the sdi->status variable in this case.
Tested on LWLA1034.
When processing of large VCD input files was spread across multiple
parse_contents() invocations, the resulting sigrok stream of sample data
had gaps in them and total timing was off. For instance 74ms of input
data were interpreted as spanning some 600ms or 300ms, depending on the
number of channels in the input stream.
Move the "previous timestamp" variable to the input module context. This
eliminates the inappropriate gaps and fixes the translation of VCD file
timestamps to sigrok sample numbers.
This fixes bug #1075.
Some drivers used locale dependent functions for converting strings
to float/double values. These functions fail when the decimal mark
is a "," in the locale settings but the string contains a ".".
This fixes bug #1064.
A "low samplerate" in this case means anything where
samples_todo is less than SAMPLES_PER_FRAME. This case
wasn't handled properly before, resulting in wrong
amounts of data being sent out.
We can't use the memory size command because it returns
the *maximum* memory used, not the *actual* memory used.
Hence, we only know the number of samples per div once
sample data actually comes in.
As there is a huge range of supported LeCroy scopes, naming
the IDN response for every single one of them is going to be
impossible. Hence, it makes more sense to treat all LeCroy
devices as if they were scopes and supported. This approach
lets users try to see how far they get and if they run into
issues, they can then be treated separately - e.g. by creating
a custom device profile.
Unless we do this, the vast majority of LeCroy scopes will
not be recognized by the driver.
Set samplelimit to a sane value (was causing PulseView to
crash earlier), as well as advertise samplerate using SR_CONF_LIST
so that PulseView can show the sample rates.
Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>
The function drains off all the remaining data in the receive socket
and is triggered before starting a capture and after a capture is
completed. In the absence of this function, there is a possibility of
data corruption and also the NodeJS TCP server throws an error if the
buffer is not completely read out before the socket is closed.
Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>
BeagleLogic now supports two modes of interface - one being the
native mode running on an ARM system like the BeagleBone Black
and the other mode acting like a TCP client for the BeagleLogic
server running off a BeagleBone compatible system. This makes it
convenient for desktop users to retrieve samples from BeagleLogic,
no more copying files and SSHing into the BeagleBone hardware in
order to use BeagleLogic.
Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>
Organize driver functions into an ops structure (there will be
separate structures for both native and TCP mode of operation).
Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>
The code earlier was in a single .h file, so it's now separated into a C file
and H file
Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>
If a channel in the higher-than-8-bit group is enabled then use
16-bit captures. Otherwise just do 8-bit captures.
Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>
Starting with Linux kernel version 4.9, BeagleLogic attributes
setting does not require root permissions.
Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>
This is unlike the previous behavior to return 8 channels and then
use logic_channels to get all the 14 channels
Signed-off-by: Kumar Abhishek <abhishek@theembeddedkitchen.net>
Values like '-0.1' would be parsed as being positive, as the integral
type does not discern +0 and -0. Also allow values without leading
integral value, to match behaviour of strtod/sr_atof.
This was leading to an invalid threshold config value and indirectly
to frontend issues.
Slightly modified patch from James Churchill <pelrun@gmail.com>, thanks!
The previous implementation unconditionally submitted analog data
whenever values could get extracted out of received serial packets.
This commit checks the channels' enabled state before submission. Care
is taken to obey the user's acquisition limits, exclusively counting
submitted not received values.
Upon reception of serial data from the ES51919 LCR chipset, the data for
channels P1 and P2 was extracted from the packet, and unconditionally got
sent to the sigrok session.
Do check the channels' enabled state before submission. This fixes for
serial-lcr what recently got reported for a Brymen DMM. Tested with
$ sigrok-cli -d peaktech-2170:conn=/dev/ttyUSB0 --channels P2
and other --channels specifications.
The es51919_serial_clean() routine is called by std_dev_clear_with_callback().
Common code unconditionally frees the 'priv' part. The cleanup callback only
shall release descending resources which are local to the callee and opaque
to the caller.
This fixes a double free error. Tested with PeakTech 2170.
$ sigrok-cli -d peaktech-2170:conn=/dev/ttyUSB0 --show
When the acquisition was stopped before a configured limit was reached,
no sample data was retrieved. This is because the api.c stop routine did
unregister the receive callback.
Pass the stop request to the receive routine instead when stop is called
while the acquisition is still running. Have sample data downloaded very
much like it's done for reached limits, and existing logic will run the
stop routine again after state was advanced to "idle".
Extend the 'state' tracking while we are here, mark sample download as
well (that was omitted in the previous implementation). Though the
omission was non-fatal. Move the release of 'dram_line' to some earlier
location (as soon as the resource is not needed any longer), before some
rather complex calls to other routines will execute.
Reported-By: Michael Kaplan <M.KAPLAN@evva.com>
Move the check for the capture ratio being 0..100 into the wrappers,
drop unneeded helper functions, fix incorrect variable types, minor
other consistency fixes.
This makes the code more consistent with the rest of the code-base
and also allows std_gvar_min_max_step_array() to work here.
Without this change:
src/hardware/scpi-pps/api.c: In function ‘config_list’:
src/hardware/scpi-pps/api.c:570:40: warning: passing argument 1 of ‘std_gvar_min_max_step_array’ from incompatible pointer type [-Wincompatible-pointer-types]
*data = std_gvar_min_max_step_array(ch_spec->voltage);
^~~~~~~
In file included from src/scpi.h:30:0,
from src/hardware/scpi-pps/api.c:23:
src/libsigrok-internal.h:964:19: note: expected ‘const double *’ but argument is of type ‘const float *’
SR_PRIV GVariant *std_gvar_min_max_step_array(const double a[3]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
src/hardware/scpi-pps/api.c:573:40: warning: passing argument 1 of ‘std_gvar_min_max_step_array’ from incompatible pointer type [-Wincompatible-pointer-types]
*data = std_gvar_min_max_step_array(ch_spec->frequency);
^~~~~~~
In file included from src/scpi.h:30:0,
from src/hardware/scpi-pps/api.c:23:
src/libsigrok-internal.h:964:19: note: expected ‘const double *’ but argument is of type ‘const float *’
SR_PRIV GVariant *std_gvar_min_max_step_array(const double a[3]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
src/hardware/scpi-pps/api.c:576:40: warning: passing argument 1 of ‘std_gvar_min_max_step_array’ from incompatible pointer type [-Wincompatible-pointer-types]
*data = std_gvar_min_max_step_array(ch_spec->current);
^~~~~~~
In file included from src/scpi.h:30:0,
from src/hardware/scpi-pps/api.c:23:
src/libsigrok-internal.h:964:19: note: expected ‘const double *’ but argument is of type ‘const float *’
SR_PRIV GVariant *std_gvar_min_max_step_array(const double a[3]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Uwe Hermann
Gerhard Sittig
mhooijboer
Frank Stettner
Soeren Apel
Philipp Marek
Andreas Zschunke
Michał Janiszewski
Stefan Brüns
Holger Müller
Timo Rothenpieler
Sylvain Pelissier
Joel Holdsworth
Kumar Abhishek
Marcus Comstedt
turboaffe