Commit Graph

4748 Commits

Author SHA1 Message Date
Frank Stettner 94cf02d0c2 hp-3478a: Remove unnecessary curly brackets. 2018-03-06 19:02:33 +01:00
Frank Stettner a575c90e81 hp-3478a: Set correct number of digits 2018-03-06 17:40:13 +01:00
Frank Stettner acc587ff24 hp-3478a: spec_digits must be parsed before range parsing. 2018-03-06 17:40:13 +01:00
Frank Stettner c3f8e1abf0 arachnid-labs-re-load-pro: Replace C++-style comments with C-style comments. 2018-03-06 17:39:37 +01:00
Frank Stettner cd97e39d89 metex14: Fix wrong measurement modes 2018-03-05 20:23:35 +01:00
Frank Stettner fd8dc1db01 metex14: Add power factor measurement mode 2018-03-05 20:23:26 +01:00
Uwe Hermann 187c300b59 libsigrok.h: Fix SR_CONF_UNDER_VOLTAGE_CONDITION_THRESHOLD order.
This has to be the last entry in its "category", otherwise it'll mean an
ABI breakage.
2018-03-03 19:25:57 +01:00
Uwe Hermann 0aaaee2dd3 arachnid-labs-re-load-pro: Simplify a code chunk. 2018-03-03 19:25:05 +01:00
Frank Stettner d7e348f481 arachnid-labs-re-load-pro: Add encoding.digits to analog packet 2018-03-03 19:25:05 +01:00
Frank Stettner 2153093941 arachnid-labs-re-load-pro: Index for channel "I" 2018-03-03 19:25:05 +01:00
Frank Stettner b3e715e528 arachnid-labs-re-load-pro: Get a response when in acquision mode. 2018-03-03 19:25:02 +01:00
Frank Stettner 706350360a arachnid-labs-re-load-pro: Make SR_CONF_REGULATION listable 2018-03-03 19:22:59 +01:00
Frank Stettner 3d70d77709 arachnid-labs-re-load-pro: Add SR_CONF_UNDER_VOLTAGE_THRESHOLD. 2018-03-03 19:10:51 +01:00
Frank Stettner 9edda1d25b arachnid-labs-re-load-pro: Setting correct current limit.
Use round() instead of just truncate the value.
2018-03-03 19:10:51 +01:00
Frank Stettner a217289951 arachnid-labs-re-load-pro: Change serial read in acquisition mode.
Use serial_readline in acquisition mode, otherwise data from the
Re:load Pro could get lost.
Use reloadpro_receive_data() for all commands when in acquisition
mode. When not using a single point of receiving data, data could get
lost.
2018-03-03 19:10:51 +01:00
Gerhard Sittig 4389a54204 pipistrello-ols: style nit, replace DIY endianess conversion 2018-03-03 18:58:59 +01:00
Gerhard Sittig 411b2f6822 link-mso19: improve endianess conversion, avoid mem access alignment issue
Prefer sigrok's endianess conversion helper over the inet htons()
routine which is harder to read (is "network order" little or big?).

Writing the conversion results in units of bytes also avoids misaligned
memory access. The header length is odd, each payload item got written
as an uint16_t item to an odd address.
2018-03-03 18:58:59 +01:00
Gerhard Sittig f7711ed56c uni-t-dmm: style nits, copy loop vs memmove 2018-03-03 18:58:59 +01:00
Gerhard Sittig 69229e5c15 saleae-logic-pro: style nits, copy loop vs memcpy 2018-03-03 18:58:59 +01:00
Gerhard Sittig 093b8ff478 pce-322a: style nits, copy loop vs memmove 2018-03-03 18:58:59 +01:00
Gerhard Sittig c372070333 mic-985xx: style nits, var decl vs assignment, copy loop vs memmove 2018-03-03 18:58:59 +01:00
Gerhard Sittig 7a65106e00 kern-scale: style nits, var decl vs assignment, copy loop vs memmove 2018-03-03 18:58:59 +01:00
Gerhard Sittig 0f6ff97bf8 center-3xx: style nits, var decl vs assignment, copy loop vs memmove 2018-03-03 18:58:59 +01:00
Uwe Hermann bdbb9151af siglent-sds: Drop superfluous log message.
This information is already emitted by other layers.
2018-03-03 18:45:58 +01:00
marchelh fdf0744fa4 siglent-sds: Added trigger position to device config code 2018-03-03 17:46:15 +01:00
marchelh e8fd027120 siglent-sds: Fixed issue with hard coded vdiv. 2018-03-03 17:46:15 +01:00
marchelh fe06061d96 siglent-sds: Drop unused variable from siglent_sds_read_header function 2018-03-03 17:45:21 +01:00
marchelh fe1aa53613 siglent-sds: Added averaging function. 2018-03-03 17:45:21 +01:00
marchelh 80eba3857a siglent-sds: Fixed timebase problem where NS could not be selected
This fixes bug #1120.
2018-03-03 17:28:49 +01:00
Frank Stettner d8df3c2a01 tests: Fix incomplete fail message for locale tests. 2018-02-21 11:37:19 +01:00
Frank Stettner 93497d0016 hp-3478a: Fix compiler warning. 2018-02-21 11:37:19 +01:00
Romain Tartière 6c1a76d126 Check usb_get_port_path() return value
This function can fail. If so, do not ignore the failure.
2018-02-21 11:37:19 +01:00
Romain Tartière 7bbe5a2b6a Ensure device is closed before usb_get_port_path()
The usb_get_port_path() function opens the passed device on FreeBSD,
which fails if the device has already been open.

This fixes bug #1109.
2018-02-21 11:36:58 +01:00
Gerhard Sittig 90cc52260c bindings/ruby: include config.h before any other header file 2018-02-21 11:19:17 +01:00
Gerhard Sittig 21964348bc bindings/python: include config.h before any other header file 2018-02-21 11:19:17 +01:00
Gerhard Sittig 1e95832b3e bindings/cxx: include config.h as early as possible
Move the inclusion of <config.h> before any other source code.
2018-02-21 11:19:17 +01:00
Gerhard Sittig dea7f6342a pce-322a: include config.h before any other header file 2018-02-21 11:19:17 +01:00
Uwe Hermann 5a64d1d954 beaglelogic: Use UINT64_MAX instead of (uint64_t)-1. 2018-02-20 20:03:21 +01:00
Uwe Hermann 71e22ba88f beaglelogic: Drop unneeded uint64_t cast. 2018-02-20 20:03:21 +01:00
Uwe Hermann 3f4c1174b6 lecroy-xstream: Fix potential issue by adding UINT64_C. 2018-02-20 20:03:21 +01:00
Uwe Hermann d9b716fc5f Use UINT64_C instead of "ULL" number suffix.
Avoid hardcoding a "ULL" number suffix, use the more portable and more
correct UINT64_C.
2018-02-20 20:03:21 +01:00
Uwe Hermann 405b9c10eb Random whitespace/cosmetic fixes. 2018-02-20 20:03:11 +01:00
Uwe Hermann 1135f8d9c7 siglent-sds: Fix two memory leaks. 2018-02-18 23:36:17 +01:00
Uwe Hermann d6d87fa2a2 siglent-sds: Drop incorrect glib includes. 2018-02-18 23:29:14 +01:00
Uwe Hermann 04c4a6776f hp-3478a: Shorten some functions. 2018-02-18 23:18:22 +01:00
Uwe Hermann 6ddedf5bac hp-3478a: Drop superfluous log message prefixes. 2018-02-18 23:13:34 +01:00
Frank Stettner d2c1730a28 hp-3478a: Initial HP 3478A diver 2018-02-18 23:13:34 +01:00
Frank Stettner 1d9eebf4be hp-3478a: Initial driver skeleton. 2018-02-18 22:59:31 +01:00
Uwe Hermann 374b0a94b2 output/analog: Fix a compiler warning on Mac OS X.
Apparently PRIu64 and G_GUINT64_FORMAT differ on some systems for
unknown reasons. Use G_GUINT64_FORMAT to get rid of the warning
for now.
2018-02-18 21:36:18 +01:00
Uwe Hermann 65788048f0 Fix two compiler warnings on MinGW/MSYS2.
The config.h file must always be included as first file.

  src/output/csv.c: In function 'gen_header':
  src/output/csv.c:64:20: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
   #define LOG_PREFIX "output/csv"
                      ^
  ./src/libsigrok-internal.h:753:42: note: in expansion of macro 'LOG_PREFIX'
   #define sr_info(...) sr_log(SR_LOG_INFO, LOG_PREFIX ": " __VA_ARGS__)
                                            ^
  src/output/csv.c:244:3: note: in expansion of macro 'sr_info'
     sr_info("Set sample period to %" PRIu64 " %s",
     ^
  src/output/csv.c: In function 'dump_saved_values':
  src/output/csv.c:462:34: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
       g_string_append_printf(*out, "%" PRIu64 "%s",
                                    ^

  In file included from src/hardware/ftdi-la/protocol.c:21:0:
  src/hardware/ftdi-la/protocol.c: In function 'send_samples':
  src/hardware/ftdi-la/protocol.h:28:20: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
   #define LOG_PREFIX "ftdi-la"
                      ^
  ./src/libsigrok-internal.h:751:42: note: in expansion of macro 'LOG_PREFIX'
   #define sr_spew(...) sr_log(SR_LOG_SPEW, LOG_PREFIX ": " __VA_ARGS__)
                                            ^
  src/hardware/ftdi-la/protocol.c:29:2: note: in expansion of macro 'sr_spew'
    sr_spew("Sending %" PRIu64 " samples.", samples_to_send);
    ^
2018-02-18 21:36:12 +01:00