8e796cb438
teleinfo: Initial driver skeleton.
2013-10-24 15:41:11 +01:00
df6b0f99af
ISO-TECH IDM103N: remove the useless -ser postfix
2013-10-13 14:54:54 +02:00
de737bfc11
add ISO-TECH IDM103N serial-dmm driver
2013-10-07 00:36:18 +02:00
72a08bccff
Minor documentation fixes
2013-09-25 11:51:54 +02:00
7b0a57fd1c
ols: add swap channels feature
...
Allow channel groups to be swapped. This is useful
for demux at 200mhz with the unbuffered channels.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-08-28 10:21:59 +02:00
eb1b610b12
ols: add external clock support
...
Add external clock support that allows you to use the tracing
targets bus clock line for sampling.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
2013-08-26 10:28:45 +02:00
db11d7d2d0
saleae-logic16: Add voltage threshold conf.
2013-08-20 19:55:57 +02:00
c463dcf06c
saleae-logic16: Initial driver skeleton.
2013-08-20 19:55:22 +02:00
3877dde43a
uni-t-ut32x: Initial driver skeleton.
2013-08-11 10:46:36 +02:00
4a8bbed76d
center-3xx: Initial Center 309 / Voltcraft K204 support.
2013-08-08 19:59:49 +02:00
4433145f48
center-3xx: Initial driver skeleton.
2013-08-08 19:58:48 +02:00
c51bbdec34
Drop nexus-osciprime skeleton for now.
...
This is mostly just a skeleton driver framework at the moment, we'll
bring it back when the driver is fully implemented.
2013-08-05 12:59:23 +02:00
2b691be806
serial-dmm/uni-t-dmm: Drop Tecpel DMM-8060.
...
The Tecpel DMM-8060 was added since we assumed it would be a rebadged
Voltcraft VC-820 (since we know the Tecpel DMM-8061 is a rebadged VC-840).
However, according to the vendor webpage it doesn't have PC connectivity
at all, so drop it for now (until someone can confirm that it does or does
not actually have RS232/USB connectivity).
2013-07-18 12:43:07 +02:00
e84e0096db
Fix build
2013-07-16 17:18:20 +02:00
ed759a0835
kecheng-kc-330b: Initial driver skeleton.
2013-07-16 16:08:38 +02:00
fdf4a1f5a0
ikalogic-scanaplus: Initial driver skeleton.
2013-07-15 12:20:53 +02:00
a7a163a795
Support for UNI-T UT60A/E multimeters via RS232 or USB
2013-07-09 22:57:55 +02:00
c134574938
uni-t-dmm: Add support for the Voltcraft VC-830.
2013-06-23 10:23:21 +02:00
6045b91aa4
serial-dmm: Add support for the Voltcraft VC-830.
2013-06-23 10:23:21 +02:00
6caeef6ee5
Add SR_CONF key for data source
2013-06-19 12:23:17 +02:00
32de50b7f3
Add SR_CONF key for powering off a device
2013-06-17 16:17:39 +02:00
8417ebad12
Add SR_CONF key for sound pressure level measurement range
2013-06-17 16:17:39 +02:00
9fd6bc2054
Add SR_CONF keys for max/min hold modes
2013-06-17 16:17:39 +02:00
fd8854c4d0
Add SR_CONF keys for sound pressure level time and frequency weighting
2013-06-17 16:17:39 +02:00
5f2a4aff4b
added Voltcraft M-3650D Multimeter
2013-06-14 01:03:29 +02:00
8fa9368eb4
cem-dt-885x: Initial driver skeleton.
2013-06-12 18:34:42 +02:00
16e76baec9
ikalogic-scanalogic2: Initial driver skeleton.
2013-06-11 18:39:54 +02:00
9e165e742f
Use consistent HW_ name prefixes everywhere.
...
Older drivers used LA_* previously, we now use HW_* everywhere though.
2013-05-10 17:18:42 +02:00
7ab89f4827
Re-enable link-mso19 and nexus-osciprime drivers.
2013-05-08 16:40:45 +02:00
26aec7fdc4
Drop link-mso19/nexus-osciprime in preparation for release.
...
These two drivers are currently unfinished and don't work, so disable
and "unhook" them for now in preparation of the next libsigrok release.
They're still in the git repository, but not hooked up to the build
system, so that they won't get detected or built, and also don't end up
in the release tarball.
Since link-mso19 is the only driver that currently requires libudev,
drop any reference to that, too.
It should be relatively easy to apply this patch in reverse after the
release to bring back both drivers.
2013-05-04 15:59:40 +02:00
29a27196a1
s/DRIVER_LOG_DOMAIN/LOG_PREFIX/.
...
This is more correct anyway, and also a bit shorter and more readable.
2013-05-03 21:59:32 +02:00
c2fa697afa
serial-dmm: Add Tecpel DMM-8060 support.
2013-05-01 03:16:47 +02:00
b38e08fbb7
serial-dmm: Add Tecpel DMM-8061 support.
2013-05-01 03:13:43 +02:00
4554314c4f
uni-t-dmm: Add Tecpel DMM-8060 support.
...
This is _very_ likely to be a rebadged Voltcraft VC-820, treating as such.
2013-05-01 03:04:46 +02:00
b6bad47c91
uni-t-dmm: Add Tecpel DMM-8061 support.
2013-05-01 03:00:41 +02:00
695d0e1efa
uni-t-dmm: Add support for the Voltcraft VC-840.
...
This DMM is already supported via the serial-dmm driver when using the
RS232 cable. The uni-t-dmm support makes it usable with the USB/HID
cable too.
2013-04-30 20:22:17 +02:00
bbef5e326d
uni-t-dmm: Add support for the UNI-T UT61E.
...
This DMM is already supported via the serial-dmm driver when using the
RS232 cable. The uni-t-dmm support makes it usable with the USB/HID
cable too.
2013-04-30 20:22:17 +02:00
ae3a59de62
serial-dmm: Add support for the UNI-T UT61D.
...
This DMM is already supported via the uni-t-dmm driver when using the
USB/HID cable. The serial-dmm support makes it usable with the RS232
cable too.
2013-04-30 20:22:17 +02:00
695f32d89d
Bring back link-mso19/nexus-osciprime for now.
...
This patch will be re-introduced later.
2013-04-26 10:47:34 +02:00
9d1164f9a1
Drop link-mso19/nexus-osciprime in preparation for release.
...
These two drivers are currently unfinished and don't work, so disable
and "unhook" them for now in preparation of the next libsigrok release.
They're still in the git repository, but not hooked up to the build
system, so that they won't get detected or built, and also don't end up
in the release tarball.
Since link-mso19 is the only driver that currently requires libudev,
drop any reference to that, too.
It should be relatively easy to apply this patch in reverse after the
release to bring back both drivers.
2013-04-25 19:16:13 +02:00
50985c2019
GPL headers: Use correct project name.
2013-04-23 22:24:30 +02:00
d8284802ca
use driver callbacks directly
2013-04-11 18:32:08 +02:00
6cefe516aa
return SR_ERR_ARG if a driver doesn't implement sr_config_*()
2013-04-11 18:32:08 +02:00
8e34ca86fb
Add SR_CONF_TRIGGER_TYPE config_info list
2013-04-11 18:32:06 +02:00
722db131a4
Add sr_config_free()
...
Due to struct sr_config now containing a GVariant, this needs to be
cleaned up after use properly. This is a helper function for that.
2013-04-11 18:32:06 +02:00
bc1c2f001a
Use GVariant for sr_config_*() functions
...
sr_config_get() provides a GVariant owned by the caller, so it must be
released with g_variant_unref() when done.
sr_config_set() takes a GVariant from the caller which may be floating;
it will be properly sunk and release after use by this function. Thus
the output of g_variant_new_*() may be used as an argument.
sr_config_list() also provides a GVariant owned by the caller, to be
unreferenced when done.
sr_config_make() can take a floating reference.
2013-04-11 18:32:06 +02:00
13d8e03c4f
Bump copyright year
2013-04-11 18:32:06 +02:00
ca0938c50b
Doxygen: Fix a few warnings.
2013-04-06 19:25:23 +02:00
3ebce226a2
s/sr_config_make/sr_config_new/.
...
This matches the naming of other/similar functions better.
2013-03-23 14:16:00 +01:00
3864648bb6
serial-dmm: Add support for RadioShack 22-805
...
Protocol-wise, this is identical to the 22-168, except that it communicates at
600 baud instead of 1200 baud.
2013-03-20 20:36:56 -05:00
Aurelien Jacobs
Bert Vermeulen
Matt Ranostay
Marcus Comstedt
Uwe Hermann
Florian Knodt
Florian Steinhardt
Marc Schink
Alexandru Gagniuc