Commit Graph

40 Commits

Author SHA1 Message Date
Uwe Hermann 66a4357667 serial-dmm: No error message upon 0 new bytes. 2013-12-01 19:30:35 +01:00
Uwe Hermann 88f544f27e Add support for the Metex M-4650CR.
(the Voltcraft M-4650CR is a rebadged Metex M-4650CR)
2013-10-30 14:44:44 +01:00
Uwe Hermann 2b83d7fee1 Add support for the Voltcraft M-4650CR. 2013-10-30 14:44:44 +01:00
Aurelien Jacobs df6b0f99af ISO-TECH IDM103N: remove the useless -ser postfix 2013-10-13 14:54:54 +02:00
Aurelien Jacobs de737bfc11 add ISO-TECH IDM103N serial-dmm driver 2013-10-07 00:36:18 +02:00
Uwe Hermann 2b691be806 serial-dmm/uni-t-dmm: Drop Tecpel DMM-8060.
The Tecpel DMM-8060 was added since we assumed it would be a rebadged
Voltcraft VC-820 (since we know the Tecpel DMM-8061 is a rebadged VC-840).

However, according to the vendor webpage it doesn't have PC connectivity
at all, so drop it for now (until someone can confirm that it does or does
not actually have RS232/USB connectivity).
2013-07-18 12:43:07 +02:00
Florian Knodt a7a163a795 Support for UNI-T UT60A/E multimeters via RS232 or USB 2013-07-09 22:57:55 +02:00
Uwe Hermann 6045b91aa4 serial-dmm: Add support for the Voltcraft VC-830. 2013-06-23 10:23:21 +02:00
Florian Steinhardt 5f2a4aff4b added Voltcraft M-3650D Multimeter 2013-06-14 01:03:29 +02:00
Uwe Hermann c2fa697afa serial-dmm: Add Tecpel DMM-8060 support. 2013-05-01 03:16:47 +02:00
Uwe Hermann b38e08fbb7 serial-dmm: Add Tecpel DMM-8061 support. 2013-05-01 03:13:43 +02:00
Uwe Hermann 2451a20ff5 fs9721: Factor out common code from serial-dmm.
These functions are FS9721 specific (and DMM specific), and can be used
from various drivers (e.g. serial-dmm or uni-t-dmm or possibly others).
2013-05-01 02:16:55 +02:00
Uwe Hermann 4853559466 uni-t-dmm/serial-dmm: Handle Voltcraft VC-840 temperature. 2013-05-01 01:58:42 +02:00
Uwe Hermann ae3a59de62 serial-dmm: Add support for the UNI-T UT61D.
This DMM is already supported via the uni-t-dmm driver when using the
USB/HID cable. The serial-dmm support makes it usable with the RS232
cable too.
2013-04-30 20:22:17 +02:00
Uwe Hermann 50985c2019 GPL headers: Use correct project name. 2013-04-23 22:24:30 +02:00
Uwe Hermann 1e1bfcd0fe serial-dmm: Use sr_dev_inst to store connection handle. 2013-04-23 20:55:04 +02:00
Alexandru Gagniuc 3864648bb6 serial-dmm: Add support for RadioShack 22-805
Protocol-wise, this is identical to the 22-168, except that it communicates at
600 baud instead of 1200 baud.
2013-03-20 20:36:56 -05:00
Uwe Hermann 7c8a9e1e0f serial-dmm: Drop unneeded g_try_malloc0(). 2013-02-02 12:34:25 +01:00
Bert Vermeulen 69e19dd769 Always interleave analog data with all enabled probes.
The new "probes" field in sr_datafeed_analog contains a copy
of all enabled struct sr_probe.
2013-01-23 03:40:44 +01:00
Uwe Hermann 986fde755d serial-dmm: Add UNI-T UT61E support (UT-D02 cable). 2013-01-03 01:13:57 +01:00
Uwe Hermann 1476661970 serial-dmm: Rename VOLTCRAFT_VC820 to VOLTCRAFT_VC820_SER.
This matches the _ser suffix of the other functions/variables for this
device ("ser" denotes that it is used with the serial UNI-T UT-D02 cable
as opposed the USB/HID based cables which are handled by the uni-t-dmm driver).

But more importantly, the _SER suffix for the enum value will prevent
name clashes later, when the uni-t-dmm driver gets a VOLTCRAFT_VC820 enum.

Do the same for VOLTCRAFT_VC840.
2012-12-26 02:11:00 +01:00
Uwe Hermann 35e199da50 Fix limit_samples check in various drivers.
Check whether a sample limit was actually set (> 0) before checking if
that sample limit is reached. This also fixes continuous acquisition mode
for drivers which have that.
2012-12-26 02:11:00 +01:00
Alexandru Gagniuc f9b9bd632f serial-dmm: Handle time-limited acquisition
Implement SR_HWCAP_LIMIT_MSEC capability, to allow acquisition to automatically
stop after a specified amount of time.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-12-25 23:55:42 +01:00
Alexandru Gagniuc d55c89f523 serial-dmm: Properly handle continuous mode
serial-dmm does not check if a sample limit is actually in place before deciding
to stop acquisition. Since the sample limit is set at 0 by default, operating
in continuous mode will cause acquisition to stop before even sending the first
sample.

Check to make sure we actually are in a sample-limited mode before stopping for
this reason.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-12-23 16:55:10 +01:00
Uwe Hermann 54d1122187 serial-dmm: Add Voltcraft VC-840 (UT-D02) support.
This works with the UNI-T UT-D02 (RS232) cable. For the USB/HID
based cable (UNI-T UT-D04), the uni-t-dmm driver must be used.

Note: This is untested, but should work just fine for all settings, with
the possible exception of temperature (testers needed!)
2012-12-17 14:21:12 +01:00
Uwe Hermann 40830061eb serial-dmm: Add Voltcraft VC-820 (UT-D02) support.
This works with the UNI-T UT-D02 (RS232) cable. For the USB/HID
based cable (UNI-T UT-D04), the uni-t-dmm driver must be used.
2012-12-17 14:21:12 +01:00
Uwe Hermann 22f5419235 serial-dmm: Cosmetics, documentation fixes. 2012-12-17 14:21:12 +01:00
Alexandru Gagniuc e7ed87a469 serial-dmm: Use dummy info struct for rs9lcd parser
The rs9lcd parser, which is used for the RadioShack 22-812 does not use its
*info parameter, and therefore did not have a rs9lcd_info struct declared.

With recent re-factoring of the receive data callbacks, it became necessary to
pass a struct pointer. This made the RECV_DATA macro look like:

- RECV_DATA(RADIOSHACK_22_812, metex14)

giving the wrong impression that the RadioShack 22-182 uses the
metex14 protocol, which is not the case.

Create a dummy rs9lcd_info struct, and correctly identify the parser
as rs9lcd in the RECV_DATA macro:

+ RECV_DATA(RADIOSHACK_22_812, rs9lcd)

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-12-13 23:16:34 +01:00
Uwe Hermann dccfe01586 serial-dmm: Use a macro for receive_data() wrappers. 2012-12-13 01:34:21 +01:00
Alexandru Gagniuc 21829e6708 radioshack-dmm: Integrate into serial-dmm
Use the infrastructure of serial-dmm to handle the RadioShack 22-812,
and completely remove radioshack-dmm.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-12-02 22:22:07 +01:00
Alexandru Gagniuc d5ce233fe1 serial-dmm: Add RadioShack 22-168 support.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-12-02 17:38:05 +01:00
Uwe Hermann d4bd66a0c7 serial-dmm: Add PCE PCE-DM32 support. 2012-12-02 14:28:29 +01:00
Uwe Hermann a376ffea49 serial-dmm: Add PeakTech 4370 support. 2012-12-02 14:22:51 +01:00
Uwe Hermann a53da08254 serial-dmm: Add Metex M-3640D support. 2012-12-02 14:22:51 +01:00
Uwe Hermann 6dca2f16ee serial-dmm: Add V&A VA18B support. 2012-12-02 14:22:51 +01:00
Uwe Hermann 5887c9cc1a serial-dmm: Add MASTECH MAS345 support. 2012-12-02 14:22:51 +01:00
Uwe Hermann f0ac4929d3 serial-dmm: Add PeakTech 3410 support. 2012-12-02 14:22:51 +01:00
Uwe Hermann ce3777ada9 serial-dmm: Add Metex ME-31 support. 2012-12-02 14:22:46 +01:00
Uwe Hermann f086b83011 serial-dmm: Add Digitek DT4000ZC support. 2012-12-02 14:21:19 +01:00
Uwe Hermann 21a7f2692e Rename tekpower-dmm to serial-dmm.
This is now a generic driver for multiple DMM "subdrivers" that use simple
serial port protocols.
2012-12-02 14:21:18 +01:00
Renamed from hardware/tekpower-dmm/protocol.c (Browse further)