576790ff7b
disable MSO-19 specific stuff for 0.1 release
2011-01-19 22:58:09 +01:00
c70fce6ba6
Don't install libs and headers in the 0.1 release.
...
The library APIs are not yet usable or finalized, so don't expose the
libs for now. Instead, only install sigrok-cli, the manpages, and
the decoders.
2011-01-19 19:20:44 +01:00
058b70353d
Move more non-public headers to sigrok-internal.h.
2011-01-19 01:16:19 +01:00
01bd1ed396
Fix compiler warning.
2011-01-19 00:46:54 +01:00
32c0551ba6
output_vcd: Make timestamp work on 32-bit machine.
2011-01-18 23:17:55 +01:00
94ba4bd689
Sigma: Update set_configuration to reflect API.
2011-01-18 23:12:57 +01:00
7c70c53843
Sigma: Set default samplerate to 200 KHz.
2011-01-18 22:39:46 +01:00
5b5ea7c6d2
Sigma: Only send trigger packet if enabled.
...
The Sigma hardware emits a default trigger event.
2011-01-18 22:24:23 +01:00
abda62ced8
Sigma: Never send empty packets.
2011-01-18 22:17:43 +01:00
afa8f8449a
output_text: Mark trigger at correct position.
...
ASCII output does not separate groups of samples with
and must be handled separately.
2011-01-18 22:14:36 +01:00
6ef7a8cb5d
output_text: Fix ASCII edge case.
2011-01-18 22:13:50 +01:00
d4f228d094
output_text: Add ASCII output.
2011-01-17 22:56:14 +01:00
b9cc36296b
demo driver: support time limit
2011-01-17 02:20:52 +01:00
574ce4988a
refuse to set sample limit under 4 (protocol can't handle it)
...
also a bit of whitespace mangling.
2011-01-17 02:18:02 +01:00
b33e7d7058
output_vcd: Emit timestamps as time, not sample num.
2011-01-16 17:55:51 +01:00
08b488b848
output_vcd: Remember samples between packets.
...
Fixes two bugs in vcd output:
1) Waveform did not match original input when viewed in gtkwave.
2) No vcd output when using 1 MHz sampling on Sigma.
2011-01-16 17:34:49 +01:00
88c51afe87
Sigma: Support for decoding partial chunks.
...
Samples are stored in chunks and the last samples do not fill up
a complete chunk. This patch adds support for decoding partial
chunks.
2011-01-16 17:05:14 +01:00
10c471ab13
Fix warnings.
2011-01-16 14:18:26 +01:00
d35aaf0256
demo: Use GIOChannels, makes it work on MinGW.
2011-01-16 14:12:52 +01:00
fbf1ff5d22
clean up output_vcd module
...
use self-expanding strings, better standards conformance
2011-01-16 04:34:45 +01:00
98b8cbc17e
Sigma: Limit number of edge triggers to 1.
...
Actually, Sigma supports 2 rising/falling triggers,
but they are ORed and the current trigger syntax
does not permit ORed triggers.
2011-01-15 20:01:00 +01:00
31facdd3c5
Sigma: Download samples from partial chunks.
2011-01-15 19:20:31 +01:00
ab224f7b61
Initial support for the OLS output format.
...
This is the file format for the OpenBench Logic Sniffer "Alternative" client.
Details: https://github.com/jawi/ols/wiki/OLS-data-file-format
This is work-in-progress.
Currently the number of samples is hardcoded to 10000. Also, this will
require a real logic analyzer as input at the moment, and will not yet
work with the "demo" driver.
2011-01-15 19:05:14 +01:00
9d7ab9ba3b
output_text: Allocate more memory for output
...
The trigger line was forgotten. Allocate 512 bytes extra.
2011-01-15 18:24:01 +01:00
9996570987
Sigma: Move sigma state to device specific struct
...
Thanks to Daniel Ribeiro for contributing this patch. Some
modifications were done.
Not tested on multiple Sigmas, because of lack of hardware.
2011-01-15 17:04:21 +01:00
3aa403e858
output_text: Allocate enough memory for output
2011-01-15 16:12:12 +01:00
858fb11c5e
Drop unused debug.c.
...
Even if we'd use it, it probably belongs into the frontend, not libsigrok.
2011-01-15 15:57:54 +01:00
484760d1a8
Cosmetics.
2011-01-15 15:57:54 +01:00
aa0b6b208e
sigrok-proto.h: Sort the prototypes, fix comments.
2011-01-15 15:57:54 +01:00
1483577eed
Start moving private stuff to sigrok-internal.h.
...
This is work-in-progress, unfinished.
2011-01-15 15:57:54 +01:00
f7606f9b75
fix hex output
2011-01-15 15:25:08 +01:00
c2bd92ec08
Slightly more consistent #include-guard naming.
2011-01-15 14:48:21 +01:00
917e0e71d5
added example code for generating a stored pattern
2011-01-15 14:28:39 +01:00
9be9893eed
Sigma: Check state in hw_closedev
...
If the device is closed without previously running hw_openedev
the driver crashes (happens in cleanup). This patch checks
if the device has been opened.
2011-01-15 14:13:23 +01:00
02440dd88c
demo: Cosmetics, constify.
2011-01-15 13:06:04 +01:00
e15f48c268
cleaned up demo driver
...
removed unused samplerate
added patternmode (random and incremental)
2011-01-15 05:12:41 +01:00
925dbf9f97
add new HWCAP patternmode
2011-01-15 05:11:40 +01:00
63570167d6
Cosmetics for the -D output.
2011-01-15 03:44:19 +01:00
17e1afcb81
Whitespace and consistency fixes.
...
Also, drop a <poll.h> #include. It's unused anyway, and breaks the build
on MinGW/Windows as there is no poll.h there.
2011-01-13 23:52:25 +01:00
9ab95e5408
make output modules a bit more crashproof
...
the event handler in output modules is now optional.
2011-01-13 07:55:35 +01:00
2507648e63
use us instead of µs in periods (VCD can't handle it)
2011-01-13 07:55:35 +01:00
2119ab0364
MinGW/Windows: Serial port portability fixes.
...
Add serial_read()/serial_write() which have different implementations on
MinGW/Windows.
Add some more error code handling and documentation.
2011-01-12 01:09:31 +01:00
ba3d481bb7
add ontinuous mode for demo driver
2011-01-12 00:25:15 +01:00
13a1291350
fully implement input_binary module
2011-01-11 23:59:33 +01:00
78ed642035
code cleanup
2011-01-11 23:59:33 +01:00
a61b0e6a35
configure: Add --enable-demo option.
2011-01-11 22:17:33 +01:00
1fdb75e145
MinGW: Quickfix to make serial.c/ols.c compile.
...
Note: It does NOT actually work, yet, it only compiles!
2011-01-11 01:27:16 +01:00
74b9b43836
cli: support --continuous option for continuous sampling
2011-01-11 00:38:15 +01:00
8a839354c1
Cosmetics, whitespace, consistency fixes.
2011-01-10 23:20:37 +01:00
fc96e6f8c8
demo: Add missing copyright line.
2011-01-10 22:49:38 +01:00
Bert Vermeulen
Uwe Hermann
Håvard Espeland
Bert Vermeulen
Håvard Espeland
Olivier Fauchon