41f5bd09b0
Deprecate SR_DI_TIMEBASES.
...
This is replaced by SR_CONF_TIMEBASE.
2013-01-25 11:22:20 +01:00
6e1fbcc41b
Deprecate SR_DI_FILTERS.
...
This is replaced by SR_CONF_FILTER.
2013-01-25 11:19:12 +01:00
e4f2b2adc1
Deprecate SR_DI_VDIVS.
...
This is replaced by SR_CONF_VDIV.
2013-01-25 11:13:49 +01:00
2a7b113d13
Deprecate SR_DI_COUPLING.
...
This is replaced by SR_CONF_COUPLING.
2013-01-25 11:04:27 +01:00
6d1ceffa95
Deprecate SR_DI_BUFFERSIZES.
...
This is replaced by SR_CONF_BUFFERSIZE.
2013-01-25 10:58:37 +01:00
dd96ea9879
Deprecate SR_DI_PATTERNS.
...
This is replaced by SR_CONF_PATTERN_MODE.
2013-01-25 03:38:44 +01:00
123e131383
Deprecate SR_DI_CUR_SAMPLERATE.
...
This is replaced by SR_CONF_SAMPLERATE.
2013-01-25 03:17:36 +01:00
fbec8bd2f3
deprecate SR_DI_SAMPLERATES
...
This is replaced by a call to config_list() with id SR_CONF_SAMPLERATE.
2013-01-25 02:39:58 +01:00
a1c743fc51
drivers: implement config_list()
2013-01-25 02:37:26 +01:00
c5fb502f97
New driver API function: config_list()
...
This takes an sr_config key and returns a list of possible values for
that key to be submitted with config_set(). The format of the list and
its contents is dependent on the key.
This will replace the SR_DI_* keys that returned such a list before,
such as SR_DI_SAMPLERATES.
2013-01-25 01:24:42 +01:00
035a1078fd
drivers: rename and reorganize config get/set
...
The driver API calls info_get() and dev_config_set() have been renamed
to config_get() and config_set(), respectively.
2013-01-24 19:19:09 +01:00
69e19dd769
Always interleave analog data with all enabled probes.
...
The new "probes" field in sr_datafeed_analog contains a copy
of all enabled struct sr_probe.
2013-01-23 03:40:44 +01:00
b1a051544d
serial: more serial processing flags to turn off
2013-01-23 02:32:58 +01:00
08a9260ba4
Header cleanup: remove unused structs.
2013-01-22 11:18:18 +01:00
431ec7ca4a
uni-t-dmm: use new sr_config struct
2013-01-21 23:40:09 +01:00
1953564a96
Rename SR_HWOPT_* and SR_HWCAP_* to SR_CONF_*
2013-01-21 23:32:50 +01:00
c89c1c9c21
Unify all SR_HWOPT_* and SR_HWCAP_* enums.
...
Only two functions remain for accessing meta info on the keys:
sr_config_info_get() and sr_config_info_name_get().
2013-01-21 23:32:49 +01:00
63b9e16e7e
No need to send a metapacket when loading a sigrok file.
2013-01-21 23:32:49 +01:00
c71bac3b98
Adjust session debugging to the new SR_DF_META packets.
2013-01-21 23:32:49 +01:00
fbf394c617
Deprecate SR_HWOPT_MODEL
...
This was only ever used for the defunct genericdmm driver.
2013-01-21 23:32:49 +01:00
083d64f94f
Use new struct sr_config_info for option metadata
2013-01-21 23:32:49 +01:00
4c0e310ca3
Add small helper for creating struct sr_config
2013-01-21 23:32:49 +01:00
72e435ab94
Adjust option helpers to new sr_config struct
2013-01-21 23:32:49 +01:00
2df1e81970
Use new SR_DF_META packet.
...
Since input modules determine a samplerate by reading from their
file format (or having it overridden with an option), they need
to pass this up to the frontend.
2013-01-21 23:32:49 +01:00
d8e3685c47
free USB config descriptor after use
2013-01-21 23:32:49 +01:00
1987b8d63e
drivers: use new sr_config struct
...
Sending an SR_DF_META packet at the start of every stream is not
mandatory; the frontend should ask for what it needs, and any extra
information the driver wants to send will come in due time.
2013-01-21 23:32:49 +01:00
9a5693a5ac
unify sr_datafeed_meta_* into one struct containing sr_config
...
struct sr_config is the new name for sr_hwopt. Its companion meta
struct, sr_hwcap_option, was renamed sr_config_info.
2013-01-21 23:32:49 +01:00
86c02e6554
serial.c: Fix copy-paste error.
...
Thanks Bert Vermeulen for reporting.
2013-01-21 01:47:30 +01:00
9d8fde40c3
uni-t-dmm: Quickfix for UNI-T UT61D.
...
This is a temporary fix only, since a major rework of uni-t-dmm is being
done at the moment, soon to be merged.
2013-01-21 01:45:02 +01:00
5edc02c77c
Add missing "ULL" suffixes.
...
These numbers are larger than 32bit, mark them as ULL to avoid compile
failures on 32bit systems.
2013-01-20 20:39:18 +01:00
73365eaed0
uni-t-dmm: Expose hwopts.
2013-01-20 19:57:04 +01:00
388f9d3e25
uni-t-dmm: Fix scanning, properly use new sr_usb_find().
2013-01-20 19:55:33 +01:00
4ebd48b352
Remove non-error hw_info_get() messages.
...
Currently hw_info_get() can receive requests for entries (info_id) that
the specific driver doesn't support. That is (right now) a valid
use-case and not an error (might change later, though).
Thus, for now, don't output messages for such requests at all (certainly
not as sr_err() where they show up in e.g. sigrok-cli output per default).
2013-01-20 18:48:02 +01:00
a978eda2c9
udev: Add UNI-T UT-D04 multimeter cable entry.
2013-01-20 18:47:35 +01:00
7d39e2105f
configure.ac: Drop AC_PROG_CXX.
...
We don't need a C++ compiler for libsigrok, so don't check for one.
This would cause a build failure on all systems where there is a C compiler
but no C++ compiler installed.
2013-01-19 21:20:56 +01:00
294245ecf2
README: Document alsa (optional) library.
2013-01-19 19:13:52 +01:00
b97cbca6c9
serial.c: OpenBSD doesn't have B460800.
2013-01-19 15:55:22 +01:00
262dd3e47d
configure.ac: Drop gthread check, no longer used.
...
We no longer use gthread (its only user was the 'demo' driver), so drop
the 'configure' check for it.
The libsigrok.pc pkg-config file is still correct, since the 'configure'
result propagates there automatically.
2013-01-16 01:31:46 +01:00
3d6de074a4
alsa: Silence ALSA scanning process.
...
Errors while opening or configuring ALSA devices during scan for devices
should not be shown by default (i.e., no sr_err() usage). Non-working
or non-accessible devices (due to permissions or other reasons) will
simply not show up in frontends. Use sr_dbg() instead of sr_err().
2013-01-16 00:02:24 +01:00
6b8d6f93bb
Get rid of obsolete SR_DI_NUM_PROBES and SR_DI_PROBE_NAMES.
...
Frontends should use the probe list in the device's sr_dev_inst
to get this information.
2013-01-15 17:42:23 +01:00
bd58d8f3ec
Makefile.am: Fix typo in 'ChangeLog' target.
2013-01-14 11:13:58 +01:00
8a22e8c0ff
cosmetics
2013-01-14 00:59:46 +01:00
dbf2482ec1
add --disable-all-drivers option
...
Can be overridden by driver --enable options to build only those drivers.
2013-01-14 00:52:55 +01:00
512bb890df
rigol-ds1xx2: More selective Rigol DS1xx2 scan
...
Patch submitted by Martin Ling.
2013-01-13 22:42:21 +01:00
5635705c83
cleanup of obsolete definition
2013-01-13 18:07:05 +01:00
18bc270461
sr_session_save(): don't use datastore
2013-01-08 14:14:44 +01:00
6936ee4206
remove datastore functionality
...
Keeping a copy of acquired data is up to the frontend, not libsigrok.
2013-01-08 14:14:44 +01:00
305de92e9d
use a dynamically expanding probe list
2013-01-08 14:14:44 +01:00
cbc80f8f8a
fx2lafw: Say if chip is old FX2 or FX2LP
...
Look at the extracted REVID, and print out if it is an FX2 (non-LP), or FX2LP.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-01-08 03:44:36 +01:00
a24e9d0484
link-mso19: Use more portable g_htons().
...
Not all systems provide <arpa/inet.h> and/or htons(). Use portable and
always available g_htons() from glib instead.
2013-01-08 03:13:45 +01:00
Bert Vermeulen
Uwe Hermann
Alexandru Gagniuc