Without a measured quantity in packet.meaning->mq the C++ binding function
sigrok::Analog::mq() throws an exception and there is no way to check if
there is any measured quantity set in the analog package.
Allow developers to specify the (default) number of frames at compile
time (default to "off" as before). Accept the frame limit spec at scan()
time as well. This is useful when applications don't run config_set() at
runtime.
Tested with:
$ pulseview -d demo:logic_channels=0:analog_channels=1:limit_frames=4
The previous implementation supported the generation of frames as a
compile time option. This change lets users adjust the feature at
runtime.
In the absence of a frame count limit no frame begin/end markers get
sent (the default behaviour of the previous implementation). When a
frame count limit is specified, the respective number of frames gets
sent and acquisition stops.
The fixed amount of 1000 samples per frame is an arbitrary choice. This
compile time option is easily adjusted in the source code.
Introduce support for the "graycode" logic pattern. Generate up to
64 bits of graycode output (all logic lines, no repetition, not limited
by the generator's internal pattern buffer). The implementation was
tested with 16 channels.
Keep a context variable around with a bit mask for all logic channels.
This is convenient in setup and generation routines, to avoid garbage
in unassigned bit positions of session feed packets.
Move the declaration of codes for pattern types before the declaration
of the context container such that the latter can reference the former.
Add 'int' to an unsigned variable that omitted the base type.
A "low samplerate" in this case means anything where
samples_todo is less than SAMPLES_PER_FRAME. This case
wasn't handled properly before, resulting in wrong
amounts of data being sent out.
This ensures consistent handling of the SR_CONF_SCAN_OPTIONS and
SR_CONF_DEVICE_OPTIONS (with sdi NULL or non-NULL) config keys
and also reduces copy-pasted boilerplate in the drivers a bit.
This function does not handle channel-group specific items, that's
very driver-specific and thus left to the individual drivers.
Also move some generic checks and error messages from the drivers into
the sr_config_list() wrapper.
Until now, clear_helper() callbacks for std_dev_clear_with_callback()
were expected to g_free(devc), but not all of them did that.
Have std_dev_clear_with_callback() unconditionally g_free(sdi->priv)
(i.e., devc), regardless of whether a clear_helper() callback was
provided or not. It was doing g_free(sdi->priv) when no callback
was provided already anyway.
This makes the individual drivers' clear_helper() implementations
shorter and prevents errors such as missing g_free(devc) calls.
This works, because all drivers either call std_dev_clear_with_callback()
directly, or indirectly via std_dev_clear().
This also allows us to remove some no-longer needed dev_clear()
and clear_helper() implementations that only did g_free(devc)
in favor of std_dev_clear().
Drop unneeded log messages, add some others that might be useful,
document which ones we're intentionally not emitting.
Don't log "$operation successful" type of messages in most cases,
that's too verbose; logging failures only is sufficient there.
baylibre-acme: Don't log "No such file or directory" messages during scan,
this triggers on all kinds of unrelated devices (e.g. "AMDGPU i2c bit
bus 0x91" in this case):
sr: [...] baylibre-acme: Name for probe 1 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0040/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 2 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0041/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 3 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0044/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 4 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0045/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 5 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0042/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 5 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-004c/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 6 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0043/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 6 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0049/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 7 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0046/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 7 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-004f/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 8 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0047/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 8 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-004b/name”: No such file or directory
The previous implementation used to provide datafeed packets which
contain logic data in positions that correspond to disabled channels.
Do mask out logic data of disabled channels in the memory image before
it is sent to the session's datafeed. This implementation works fine for
those situations where either all logic channels are enabled (default
configuration) or when only the upper channels get disabled (which can
be considered a typical use case).
For those configurations where enabled channels follow disabled channels
(i.e. setups with gaps in the sequence of enabled channels) behaviour
will be unexpected: Neither is the mask adjusted to contain gaps, nor
will enabled channels get mapped to result in a dense representation.
The respective code paths are marked with TODO comments.
Add a comment to discuss a non-obvious generator call for analog data in
the acquisition start routine, while we are here.
The generator logic determines how many samples per group (analog and
logic) need to get produced, then keeps iterating until each group has
reached the specified count. Different groups can generate different
numbers of samples per iteration, they have their own stride.
It's essential to check whether all channels in a group are disabled, to
then completely skip the respective half of the generation loop. Without
this check, the group would be expected to generate data but it won't,
which results in an endless loop. This was observed with analog channels.
There was another issue with logic channels. Unexpected logic data was
seen in the output although neither logic channel was selected.
This commit fixes bug #923.
Skip the emission of session datafeed packets for disabled analog
channels.
Implementation detail: Allow for quick lookup of the channel that is
associated with an analog generator, as the data generation routines
only pass generator references in later calls.
This fixes part of bug #923 (which initially is about unexpected
logic data while analog channels were affected in similar ways).
After the requested number of samples was sent, another session df
packet was emitted with one sample for the analog channels, which
contained the most recent result of averaging. Make this emission
depend on the "averaging requested?" flag.
This fixes bug #930.
The 'demo' driver supports scan options to adjust the number of
supported channels, and runtime control for the enabled state of
channels.
Starting with zero analog channels created (scan option) resulted in a
runtime assertion. Creating but disabling analog channels (GUI checkbox,
CLI option) resulted in unexpected output for disabled channels.
Move the creation of a hash table out of the conditional loop that
iterates over created analog channels. Which results in the table's
always being valid, and iteration during data acquisition yields no
analog output as is expected.
This fixes bug #625.
A previous implementation of the demo driver supported the creation of
larger channel counts yet only enabling part of them by default. This
was kind of pointless, I just was not aware of the available scan
options.
Drop the "enabled channels" limitation, enable all channels that get
created (like the implementation before the experiment did), and create
as many channels as was compiled in by default or later got specified
by scan options.
Bump the number of supported logic channels from 8 to 128. This is
mostly motivated to test the 64 channels limit which some of the
components/subprojects of the sigrok project might have (input/output
modules, user interfaces).
Only automatically enable the first 8 of the 128 total logic channels,
i.e. default to the previous behaviour. Prepare to only enable part of
the set of analog channels, but stick with their being active by default
as well.
Factor out the choice for the default logic pattern, too. This allows
for easier adjustment of the default configuration, when settings are
concentrated in a single spot.
Extend the demo driver, add another waveform choice for logic channels.
Create a "cable squid" logo representation which occupies a large number
of channels.
This pattern occupies 128x128 pixels. Unlike the 'sigrok' pattern it
gets repeated when more channels are involved, but is not shifted in the
repetition.
devc->step is not reset on acquistion start, so acquisition
starts with a different value every time. Thats annoying when
using the demo driver to debug sigrok, so lets make sure that
it's reset to 0.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Uwe Hermann
Frank Stettner
Soeren Apel
luftek
Gerhard Sittig
Sven Schnelle