Log determined header format when parsing trace32 file headers. Keep
another log message during regular processing, but silence it during
format match.
Use more appropriate data types for local and instance variables. Adjust
format strings accordingly.
There were several issues with the previous implementation of the logic
which parses trace32 input files: A string comparison was inverted, and
compared a seven character literal to a five character copy of the input.
One more character was trimmed before CTRL-Z (the CP/M EOF), which often
is SPACE in input files, but might be excessive on other input files.
Replace a DIY character search while we are here. Use symbolic names for
special characters. Factor out a test and memory release, to simplify
error code paths in the remaining logic. Extend comments.
There is not much point in log messages about format mismatch in the
auto detect phase, where each module gets queried in turn and most are
supposed to not match.
Do not print non-printable characters in log messages. Those could occur
in the format detection phase, or in the regular processing of input
files that either are unexpected or invalid (or is there a binary header
format variant even?).
Although the file format handled by this input module appears to be of
fixed size (8MiB plus 5 more bytes), it's more reliable to use a data
type for the file size that is larger than "an int". Although off_t
would be most portable, use uint64_t to match the code which passes the
parameter to the input module.
The previous implementation already was inconsistent (used to allocate
255 bytes and claimed that 128 bytes were sufficient). While existing
formats already required more than a few bytes of input (regular VCD
files' header sections exceed 255 bytes length).
Increase the buffer size that gets passed to input modules' match
method. Use 4MiB for consistency with other locations. Do not enforce a
minimum size, as there are valid input files which are shorter than 128
bytes. Auto-detection failed on those.
This addresses part of bug #1200.
When users don't specify the input format, applications can try to have
the format auto-detected. Some of the tests were weak and could result
in false positives.
Add a 'confidence' parameter to the input modules' format_match()
method. Claim high confidence (1) for those formats which can check
magic strings or the presence of essential keywords (vcd, wav). Claim
medium confidence (10) for those formats which happened to mis-detect
inputs in the past (trace32_ad). Claim weak confidence (100) for those
formats which totally lack reliable conditions and rather guess than
detect (chronovu_la8).
Prefer the best match in public scan routines. Return at most one module
to callers even if multiple modules matched, to keep the current API.
This addresses part of bug #1200.
Implement an input module for .lpf files, the "LogicPort File" format of
the Intronix LA1034 vendor software. This version supports wires with
enabled and inverted state, compressed samples, signal names, signal
groups (but not multiple assignment), and automatic format detection.
The logic which determines whether "the file header" was completely
received, and sample data can get sent to the session, implements an
assumption in the absence of a better and more reliable condition.
Invalid input gets rejected, but diagnostics is rather limited. Since
all channels get to be the member of a channel group, either specified
by the user in the input file, or arranged for in the input module, the
"missing separator" part of bug 1186 has become obsolete.
src/analog.c:205:23: warning: declaration of ‘i’ shadows a previous local [-Wshadow]
for (unsigned int i = 0; i < count; i++) {
^
src/analog.c:178:18: note: shadowed declaration is here
unsigned int b, i, count;
^
[...]
src/analog.c: In function ‘sr_analog_to_float’:
src/analog.c:194:9: warning: declaration of ‘offset’ shadows a previous local [-Wshadow]
float offset = analog->encoding->offset.p / (float)analog->encoding->offset.q;
^~~~~~
src/analog.c:177:8: note: shadowed declaration is here
float offset;
^~~~~~
Allow developers to specify the (default) number of frames at compile
time (default to "off" as before). Accept the frame limit spec at scan()
time as well. This is useful when applications don't run config_set() at
runtime.
Tested with:
$ pulseview -d demo:logic_channels=0:analog_channels=1:limit_frames=4
The previous implementation supported the generation of frames as a
compile time option. This change lets users adjust the feature at
runtime.
In the absence of a frame count limit no frame begin/end markers get
sent (the default behaviour of the previous implementation). When a
frame count limit is specified, the respective number of frames gets
sent and acquisition stops.
The fixed amount of 1000 samples per frame is an arbitrary choice. This
compile time option is easily adjusted in the source code.
Introduce support for the "graycode" logic pattern. Generate up to
64 bits of graycode output (all logic lines, no repetition, not limited
by the generator's internal pattern buffer). The implementation was
tested with 16 channels.
Keep a context variable around with a bit mask for all logic channels.
This is convenient in setup and generation routines, to avoid garbage
in unassigned bit positions of session feed packets.
Move the declaration of codes for pattern types before the declaration
of the context container such that the latter can reference the former.
Add 'int' to an unsigned variable that omitted the base type.
When auto-detection tries to find the input module that can handle a
file, unexpected input format should be considered non-fatal. Only emit
error messages when process_header() got invoked from process_buffer()
after initialization. Emit debug messages in early stages where no input
module context exists yet.
The initial voltage threshold in dev_open() was being set to a
default value in the devc->cur_threshold variable but not actually set
in the device itself.
Patch by Jörg Alpers <jalpers@gmx.net>, thanks a lot!
- fix LIBUSB_TIMEOUT errors
- fix same data receiving
- send reset vendor request before new data getting
- decrease USB polling timeout
This fixes bug #1190.
Signed-off-by: Andrej Valek <andy@skyrain.eu>
- use pragma to handle different behavior between gcc and minGW bit-field packing
- bit-field integer variables needs to be align to 2-byte boundary
Compiler does not produce an error when accessing into non-__packed pointer.
However, the field might not be properly aligned for this type.
More information could be found on:
- https://sourceforge.net/p/mingw-w64/bugs/275/
- http://www.keil.com/support/man/docs/ARMCC/armcc_chr1359124990875.htm
Signed-off-by: Andrej Valek <andy@skyrain.eu>
Before this change, the loglevel check would only be performed for the
default log handler in libsigrok, but not for other handlers set
via sr_log_callback_set().
This fixes bug #698.
A local buffer was too small, snprintf() was used to write the
name of the analog-1-1-xxx ZIP archive names in that buffer.
Due to the limited size, only 3 characters were usable for the last
number component, i.e. the code would loop around from analog-1-1-999
to analog-1-1-100 (instead of analog-1-1-1000).
As a quickfix, increase the buffer size by a large margin, a nicer
fix should be used later on.
These trigger quite often with unrelated devices and confuse people.
scpi_usbtmc: Failed to get configuration descriptor: LIBUSB_ERROR_NOT_FOUND, ignoring device.
The Modbus RTU implementation was inappropriately returning lengths
from the serial functions when the calling functions expect only an
sr_error_code value.
Make sure to not exceed the ctx->analog_samples[] array bounds. Don't
use the (huge) channel's index in the device's(!) channel list, instead
use the zero-based and dense index into the array of analog samples in
the accumulation buffer, before writing to the external file.
This fixes the segfault reported in bug #1124.
The process_analog() logic is rather complex, dealing with the total
list of channels in the device (which can be of different types), and a
number of submitted samples for a specified list of channels. Replace
the rather short variable names for i, j, c (and num_channels) with
something longer that hopefully increases readability of the complex
loop bodies.
Note that this change merely renames identifiers, and does not change
behaviour.
Instead of nesting indentation levels upon equality of a value, skip
iterations upon inequality. This reduces indentation, and might improve
readability.
[ Indentation changes, see 'diff -w -b' for the essence. ]
Use serial_readline in acquisition mode, otherwise data from the
Re:load Pro could get lost.
Use reloadpro_receive_data() for all commands when in acquisition
mode. When not using a single point of receiving data, data could get
lost.
Prefer sigrok's endianess conversion helper over the inet htons()
routine which is harder to read (is "network order" little or big?).
Writing the conversion results in units of bytes also avoids misaligned
memory access. The header length is odd, each payload item got written
as an uint16_t item to an odd address.
The config.h file must always be included as first file.
src/output/csv.c: In function 'gen_header':
src/output/csv.c:64:20: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
#define LOG_PREFIX "output/csv"
^
./src/libsigrok-internal.h:753:42: note: in expansion of macro 'LOG_PREFIX'
#define sr_info(...) sr_log(SR_LOG_INFO, LOG_PREFIX ": " __VA_ARGS__)
^
src/output/csv.c:244:3: note: in expansion of macro 'sr_info'
sr_info("Set sample period to %" PRIu64 " %s",
^
src/output/csv.c: In function 'dump_saved_values':
src/output/csv.c:462:34: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
g_string_append_printf(*out, "%" PRIu64 "%s",
^
In file included from src/hardware/ftdi-la/protocol.c:21:0:
src/hardware/ftdi-la/protocol.c: In function 'send_samples':
src/hardware/ftdi-la/protocol.h:28:20: warning: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
#define LOG_PREFIX "ftdi-la"
^
./src/libsigrok-internal.h:751:42: note: in expansion of macro 'LOG_PREFIX'
#define sr_spew(...) sr_log(SR_LOG_SPEW, LOG_PREFIX ": " __VA_ARGS__)
^
src/hardware/ftdi-la/protocol.c:29:2: note: in expansion of macro 'sr_spew'
sr_spew("Sending %" PRIu64 " samples.", samples_to_send);
^
Optionally create multiple analog channels in serial-dmm's scan()
routine. Allow the meters' parse routines to fill in more than one
analog value from the inspection of a single packet.
Use "large" (4 times 14 bytes) packets for the Metex M-3860M and the
PeakTech 4390A meters, and have those large packets parsed by wrapping
the routines for regular 14-byte Metex packets, and sending four values
to the session bus after reception of one large packet.
Thanks to Frank Stettner <frank-stettner@gmx.net> for testing and
fixing the initial implementation of this extension.
Move the initial assignment to the 'offset' variable to the very spot
where it gets evaluated and subsequently manipulated.
Replace a DIY copy loop with the corresponding memmove(3) call.
Also use "r" and "f" as trigger slope values for now, since that's
what most other drivers do currently.
This also fixes two scan-build issues:
api.c:559:3: warning: Value stored to 'tmp_str' is never read
tmp_str = g_variant_get_string(data, NULL);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
api.c:561:9: warning: Use of memory after it is freed
ret = siglent_sds_config_set(sdi, "%s:TRSL %s",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The strcasestr() function is non-portable (e.g. not available on
MinGW, possibly elsewhere). Replace it with g_strstr_len() for the time
being. While the latter is not case-insensitive it appears that
that property doesn't matter here ("." should not be relevant anyway,
and e.g. an SDS1202X-E does indeed report "Mpts" as such).
Should it become necessary to have this code be case-insensitive,
we'll have to find a more portable solution than strcasestr().
This causes some compile errors on platforms where RPC is not available, e.g.
siglent-sds/api.c:25:21: fatal error: rpc/rpc.h: No such file or directory
Surrounding the #include (and later code) with "#if HAVE_RPC" should avoid
these compile errors, but since it's not used at all for now, drop it.
Make the USB reset for USB TMC devices conditional. Check a whitelist,
which in this implementation exclusively contains the Siglent VID.
The whitelist's comment may need adjustment. The VID probably not only
applies to SDS devices, but could be used for SDG and others as well.
And lsusb output suggests the VID is used by Atten, too.
Add the Siglent's VID to a list of blacklisted USB TMC devices.
Unconditionally reset USB devices in the open routine.
This was taken from marchel's development for Siglent SDS. Though the
reset should probably be conditional, and only get applied to devices
which are known to need it.
The comment may need adjustment, maybe individual PID entries are
required. The VID probably not only applies to SDS devices, but could
be used for SDG and other gear as well. And lsusb output suggests the
VID is used by Atten, too.
Implement a first version of the driver for the Siglent SDS1000 and
SDS2000 oscilloscopes.
[ gsi: This commit corresponds to git 0228126017e6 of marchelh's tree,
I adjusted the source to closer match the project's coding style. The
conversion was verified by this command:
$ git diff --word-diff=color -w -b <branch>:<dir> <branch>:<dir>
Changes include: Whitespace adjustment, dead code removal, separation
of variable declaration and assignment, alpha-sorted includes. Line
length was not addressed and not every location got adjusted, to keep
the diff minimal and to reduce effort during review of this version. ]
Check for successful allocation before accessing struct members. Return
with an error from device initialization when allocation fails.
This was reported by clang's scan-build.
Make sure to release the allocated "pod enabled" memory, too, when SCPI
communication during channel setup fails. Defer the return with an error
(instead of duplicating the free() invocation).
This was reported by clang's scan-build.
The compiler marks a potential use after free, which the current
implementation won't trigger. The error only occurs when a sigrok
channel is neither logic nor analog.
Address the issue nevertheless, to silence the compiler warning, and to
protect against possible programming errors when a future implementation
should support more channel types.
This was reported by clang's scan-build.
Fixup unbalanced braces for more complex if statements, to better
reflect the project's official coding style.
Adjust data types in the float_to_le() routine. A float value gets
copied to a buffer of bytes (uint8_t). Don't use 'char' on the other
side of assignments, to not assume a specific width for char, and to
avoid potential signedness issues. Copy from bytes to bytes instead.
The WAV output module supports an optional 'scale' factor, in its
absence the samples will pass unmodified. The builtin help text is
unexpected, and reads:
$ sigrok-cli -O wav --show
...
Options:
scale: Scale values by factor (default 0.0)
Setup a default scale factor of 1.0, which results in identical
behaviour and better reflects what is happening.
The previous implementation only emitted data for the first enabled
channels, and "saw no changes" after emission of the initial value for
channels on positions that followed a disabled channel.
Assume that the received data from the session bus communicates the bits
of enabled channels in a packed representation. Skip the mapping of
output bit indices to sigrok channel numbers.
This fixes the remaining part of bug #519.
Tested by inspecting in gtkwave the result of command:
$ sigrok-cli -d demo -C D1,D3,D6 -c samplerate=2M --samples 2500 -O vcd -o trace.vcd
When we find that all input sources (device drivers, and input modules)
provide a dense bit field, all of the mapping logic can get removed
here. This commit just quickly disables the logic.
Identifiers for channels in the VCD header section could be "sparse"
when sigrok channels were disabled. Make sure to not assign names to
disabled channels. This will e.g. assign !, ", and # to channels D1, D3,
and D6, when D0, D2, D4-D5, and D7 are disabled.
This addresses part of bug #519.
Few DMM drivers already did it. This commit adjusts the remaining DMM
drivers, to set the "DC" flag for measurements in diode mode.
This fixes bug #144.
Although I don't have the hardware to test, the nature of the change and
the arrangement of driver code suggests it's good. When a meter already
communicated the "DC" status, the change does nothing and won't harm.
The change ensures "DC" is flagged for those meters which previously
didn't, which is desirable.
Some SCPI based drivers fail to convert response data, because strutil
conversion helpers sr_atol() and sr_atof() don't like trailing spaces
after the number's text that successfully got converted.
It's yet to get determined whether all call sites of the conversion
routines like their eating adjacent whitespace. But given that the
conversion routine explicitly checks for end of the string after the
number, no call site should expect or even depend on trailing text to
keep its whitespace.
See bug #788 for a discussion and example data.
Synchronize sr_parse_sizestring() with sr_si_string_u64() capabilities.
Add support for the T/P/E suffixes. Since this conversion helper deals
with integer values exclusively, there is no issue with case insensitive
matches. The value cannot be pico. Neither is there an ambiguity with
the 10e6 notation.
This addresses bug #763.
Fix a style nit while we are here. Put braces around both arms of a
complex conditional.
Explicitly assign NULL to param to avoid the "may be used uninitialized"
warning reported in bug #1094. Behaviour remains unchanged. All references
to the variable were under "if (!conn)", and the assigning arm of the
branch checked for "if (!param)" after assignment. So the error could
not happen, but compilers may not have noticed depending on the width of
their scope during compilation.
Move the initialization of 'conn' closer to the conditional assignment,
such that all paths are seen in one spot during maintenance.
This fixes bug #1094.
Although log messages are terminated by a line feed, output still might
get buffered when the program does not talk to a terminal (that it is
aware of). Add an fflush(3) call to the printf(3) sequence such that log
output will immediately show up when writing to pipes or sockets, too.
Early sr_init() steps can just 'return' fine. After allocation of the
'context' memory, make all error paths 'goto done' before returning,
to undo the memory allocation.
The srzip output module dropped support for the "filename" option in
commit 37875f7506 on 2015-07-30, but still used to assign to slot
options[0] which clobbers the array's sentinel. Remove those accesses
to the non-existing option.
api.c: In function 'config_set':
api.c:352:5: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'uint64_t' [-Wformat=]
sr_err("invalid sample range 2k...64M: %ld",
^
Gerhard Sittig
Uwe Hermann
Mandl
Andrej Valek
Sven Bursch-Osewold
James Churchill
Soeren Apel
Axel Hinrichs
Frank Stettner
marchelh
Romain Tartière