854434de0b
Use std_serial_dev_open().
2013-12-07 21:54:08 +01:00
d43b090816
std: Standardize function name.
...
std_dev_acquisition_stop_serial() is now std_serial_dev_acquisition_stop().
2013-12-07 21:23:39 +01:00
bf2c987fde
Use std_serial_dev_close() to replace matching dev_close functions.
2013-12-07 19:43:47 +00:00
abc4b3356d
Route sr_source_add for all serial devices through a serial_source_add wrapper.
2013-12-07 19:43:47 +00:00
66a4357667
serial-dmm: No error message upon 0 new bytes.
2013-12-01 19:30:35 +01:00
61bab807f4
DT4000ZC/TP4000ZC: Force DTR=1 on the serial port.
...
This fixes the driver e.g. on NetBSD.
2013-11-20 00:42:08 +01:00
8f996b8948
probe_groups: API changes required to implement probe groups.
2013-11-08 01:03:16 +01:00
88f544f27e
Add support for the Metex M-4650CR.
...
(the Voltcraft M-4650CR is a rebadged Metex M-4650CR)
2013-10-30 14:44:44 +01:00
2b83d7fee1
Add support for the Voltcraft M-4650CR.
2013-10-30 14:44:44 +01:00
df6b0f99af
ISO-TECH IDM103N: remove the useless -ser postfix
2013-10-13 14:54:54 +02:00
72e1672fc9
es519xx: Cosmetics, coding style, minor fixes.
2013-10-07 00:36:18 +02:00
de737bfc11
add ISO-TECH IDM103N serial-dmm driver
2013-10-07 00:36:18 +02:00
e52bb9be83
Voltcraft VC-830: Fix diode mode handling.
...
This DMM is not using the standard bits in the FS9922 protocol/structure
to indicate the "volt" and "diode mode" flags. Instead, it only sets the
user-defined bit "z1" to indicate both "diode mode" and "volt".
This fixes #142 .
2013-09-01 15:27:21 +02:00
2b691be806
serial-dmm/uni-t-dmm: Drop Tecpel DMM-8060.
...
The Tecpel DMM-8060 was added since we assumed it would be a rebadged
Voltcraft VC-820 (since we know the Tecpel DMM-8061 is a rebadged VC-840).
However, according to the vendor webpage it doesn't have PC connectivity
at all, so drop it for now (until someone can confirm that it does or does
not actually have RS232/USB connectivity).
2013-07-18 12:43:07 +02:00
a7a163a795
Support for UNI-T UT60A/E multimeters via RS232 or USB
2013-07-09 22:57:55 +02:00
6045b91aa4
serial-dmm: Add support for the Voltcraft VC-830.
2013-06-23 10:23:21 +02:00
5f2a4aff4b
added Voltcraft M-3650D Multimeter
2013-06-14 01:03:29 +02:00
3b412e3a30
s/clear_instances/dev_clear/.
...
Consistently use the same name for the dev_clear() API callback
everywhere.
2013-06-02 16:56:41 +02:00
f6beaac55c
std: Drop hw_ from function names.
...
The per-driver API calls no longer have a hw_ prefix (e.g. hw_init()
became init() and so on), so drop the 'hw_' from the std versions
for those API callbacks too.
2013-06-02 16:46:18 +02:00
6078d2c996
Use consistent API callback function names.
...
This now matches what the 'new-driver' tool generates.
2013-05-10 20:01:37 +02:00
3f0513bac1
serial-dmm: Use std_dev_clear().
2013-05-10 18:53:42 +02:00
2a052cc4d6
Use consistent naming for internal libtool helper libs.
...
This now also matches what the 'new-driver' tool generates.
2013-05-10 17:44:01 +02:00
29a27196a1
s/DRIVER_LOG_DOMAIN/LOG_PREFIX/.
...
This is more correct anyway, and also a bit shorter and more readable.
2013-05-03 21:59:32 +02:00
c2fa697afa
serial-dmm: Add Tecpel DMM-8060 support.
2013-05-01 03:16:47 +02:00
b38e08fbb7
serial-dmm: Add Tecpel DMM-8061 support.
2013-05-01 03:13:43 +02:00
2451a20ff5
fs9721: Factor out common code from serial-dmm.
...
These functions are FS9721 specific (and DMM specific), and can be used
from various drivers (e.g. serial-dmm or uni-t-dmm or possibly others).
2013-05-01 02:16:55 +02:00
4853559466
uni-t-dmm/serial-dmm: Handle Voltcraft VC-840 temperature.
2013-05-01 01:58:42 +02:00
ae3a59de62
serial-dmm: Add support for the UNI-T UT61D.
...
This DMM is already supported via the uni-t-dmm driver when using the
USB/HID cable. The serial-dmm support makes it usable with the RS232
cable too.
2013-04-30 20:22:17 +02:00
e73ffd4238
Enforce open device before config_set()/dev_acquisition_start()
2013-04-24 22:03:50 +02:00
50985c2019
GPL headers: Use correct project name.
2013-04-23 22:24:30 +02:00
1e1bfcd0fe
serial-dmm: Use sr_dev_inst to store connection handle.
2013-04-23 20:55:04 +02:00
bd6fbf628a
drivers: return SR_ERR_NA on unsupported config key
...
Fixes bug 89.
2013-04-16 11:00:55 +02:00
ede25f4e6f
serial-dmm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
3864648bb6
serial-dmm: Add support for RadioShack 22-805
...
Protocol-wise, this is identical to the 22-168, except that it communicates at
600 baud instead of 1200 baud.
2013-03-20 20:36:56 -05:00
cd2f0fe22c
Add/use std_hw_dev_acquisition_stop_serial().
2013-02-08 23:32:45 +01:00
6fab7b8f53
Driver struct cleanups.
...
- Explicitly list .config_get in all drivers for consistency, and set it
to NULL if unused (whether or not a driver implements it is optional).
- List all 'struct sr_dev_driver' entries in the same order in all drivers.
- Move the check whether .config_set/.config_list exist (i.e., are non-NULL)
into sanity_check_all_drivers().
2013-02-07 10:58:35 +01:00
4afdfd4628
Add and use std_session_send_df_header().
...
This is a small helper function which sends the SR_DF_HEADER packet that
drivers usually emit in their hw_dev_acquisition_start() API callback.
It simplifies and shortens the hw_dev_acquisition_start() functions
quite a bit.
It also simplifies the input modules which send an SR_DF_HEADER packet, too.
This patch also automatically removes some unneeded malloc/free in some
drivers for the 'packet' and 'header' structs used for SR_DF_HEADER.
2013-02-07 10:46:28 +01:00
961009b0c4
hw_dev_close(): Move common checks to wrapper.
...
Check the relevant arguments for != NULL before calling the actual
driver-specific function, so that the driver can safely assume those
arguments are non-NULL. This removes the need to duplicate these
checks in every driver.
2013-02-05 18:46:33 +01:00
0e94d524c1
Shorten/simplify hw_dev_list() implementations.
2013-02-05 18:27:05 +01:00
7c8a9e1e0f
serial-dmm: Drop unneeded g_try_malloc0().
2013-02-02 12:34:25 +01:00
063e7aef6d
Factor out common hw_init() driver code.
...
Most drivers do pretty much the same things in their hw_init()
right now, so factor out that code to std_hw_init() in std.c.
2013-01-29 12:56:02 +01:00
6a4710fac2
drivers: Trim unused config_get() calls
...
None of the driver config_get/set/list calls are required.
2013-01-25 16:05:48 +01:00
0d485e30c6
Deprecate SR_DI_HWOPTS.
...
This is replaced by SR_CONF_SCAN_OPTIONS.
2013-01-25 15:09:20 +01:00
9a6517d14b
Deprecate SR_DI_HWCAPS.
...
This is replaced by SR_CONF_DEVICE_OPTIONS.
2013-01-25 15:01:49 +01:00
a1c743fc51
drivers: implement config_list()
2013-01-25 02:37:26 +01:00
035a1078fd
drivers: rename and reorganize config get/set
...
The driver API calls info_get() and dev_config_set() have been renamed
to config_get() and config_set(), respectively.
2013-01-24 19:19:09 +01:00
69e19dd769
Always interleave analog data with all enabled probes.
...
The new "probes" field in sr_datafeed_analog contains a copy
of all enabled struct sr_probe.
2013-01-23 03:40:44 +01:00
1953564a96
Rename SR_HWOPT_* and SR_HWCAP_* to SR_CONF_*
2013-01-21 23:32:50 +01:00
1987b8d63e
drivers: use new sr_config struct
...
Sending an SR_DF_META packet at the start of every stream is not
mandatory; the frontend should ask for what it needs, and any extra
information the driver wants to send will come in due time.
2013-01-21 23:32:49 +01:00
6b8d6f93bb
Get rid of obsolete SR_DI_NUM_PROBES and SR_DI_PROBE_NAMES.
...
Frontends should use the probe list in the device's sr_dev_inst
to get this information.
2013-01-15 17:42:23 +01:00
Bert Vermeulen
Martin Ling
Uwe Hermann
Aurelien Jacobs
Florian Knodt
Florian Steinhardt
Alexandru Gagniuc