When checking architecture-specific things, always check $host, i.e. the
architecture we're building _for_, not the one we happen to build _on_.
E.g. when cross-compiling _for_ Android (or Windows or others) it's important
to check for Android in $host; whether we happen to cross-compile _on_ a Linux
or Windows or OpenBSD or FreeBSD machine ($build) doesn't matter, only the
fact that we compile _for_ Android is important for most checks.
On Windows/MinGW 'recv' seems to be already defined in windows.h/winsock2.h.
Use 'receive' instead, for now, otherwise we get an error:
vcd.c:147:17: error: conflicting types for 'recv'
In the configure summary at the end also print the architecture we're
building on ($build) and the target host we build for ($host). The two are
not necessarily the same, e.g. in the case of cross-compiles.
In the summary output at the end of a configure run, explicitly mention
which versions of which libraries are required, and also the version which
pkg-config has found.
Use the canonical driver name (all-lowercase, e.g. "serial-dmm") in the
list of enabled/disabled drivers that configure prints after a run.
It's common to many drivers that they support multiple devices, so
printing one device name (e.g. "ChronoVu LA8") is seldom really correct.
E.g. the agilent-dmm, asix-sigma, brymen-dmm, colead-slm, fluke-dmm,
fx2lafw, hantek-dso, lascar-el-usb, mic-985xx, openbench-logic-sniffer,
rigol-ds1xx2, uni-t-dmm, victor-dmm, and zeroplus-logic-cube drivers
all support more than just one device.
So, just print the driver name instead which is more correct anyway
since it's specifically a list of enabled/disabled drivers.
Don't rely on the "heuristic" that 'libusb_CFLAGS' will be non-empty if
libusb-1.0 was found, but rather use the proper method of checking the
variable 'have_libusb1_0' which pkg-config will set to "yes"/"no"
depending on whether it finds the library.
- If libusb-1.0 is not found, do not compile in ezusb.c and usb.c since
they require libusb.h. The respective hardware drivers that use
libusb-1.0, and usb.c and/or ezusb.c will be excluded from the build
elsewhere in configure.ac. Rename NEED_EZUSB to NEED_USB.
- Drop the NEED_SERIAL check and always compile in serial.c. This is a
very small chunk of code, it does not depend on any external
libraries that might be missing, and it compiles on all architectures.
Thus there's no need to conditionally include or exclude it.
In order for lib autodetection and disabling of drivers (which require
libs that cannot be found) to work, the order of AC_ARG_ENABLEs,
AM_CONDITIONALs, and AC_DEFINEs needs to be changed.
All drivers start out enabled or disabled (depending on whether
the --disable-drivers option was supplied or not). Then, any driver can
be enabled or disabled explicitly via --enable-<drivername> or the
resp. --disable-<drivername> option. Finally, pkg-config checks for all
libraries are performed, and all drivers which require a library that
cannot be found are disabled explicitly (regardless of any
--enable-<drivername> option that might have been supplied).
Until now, we checked for certain (optional) libraries via pkg-config and
the configure script would abort if any of them was not found, even
though they were optional. It was up to the user to then figure out which
combination of --disable-<drivername> switches were required for his
specific OS (and set of installed libs) to get a working configure run.
Only if the user already specified enough --disable-<drivername>
switches beforehand, so that all drivers which require a missing library
were disabled, would the configure run not check for that specific lib
(and would thus not fail).
With this change, we now always unconditionally check for all libs
(required and optional) via pkg-config. However, whether an (optional) lib
is found or not, configure will not abort. Instead, it'll just disable
all drivers which need a lib that cannot be found.
The user will no longer have to supply --disable-<drivername> parameters
in order to get a working build.
The automake 'std-options' option checks whether all installed tools
and scripts have a --help and --version CLI option. This check is not
needed for libsigrok though, since it doesn't install any tools.
Expresses the time between samples, in milliseconds. This can be used
for devices with a samplerate > 1 second, such as dataloggers, which
cannot be expressed with SR_CONF_SAMPLERATE.
This adds a suite of unit tests for libsigrok. It uses the 'Check'
tool/library (apt-get install check) to run the tests.
The configure tool tries to find libcheck. If it succeeds, a
"make check" will run all tests. Otherwise, none of the tests will
be built and "make check" will not run any tests.
This also means that users who don't have 'check' installed will still
be able to build and install libsigrok just fine.
This has been deprecated in favor of sr_session_stop() since a while.
None of the current frontends use sr_session_halt() anymore, neither
does libsigrok.
This is essential if a format contains e.g. the number of probes; the
init() function needs to initialize the sr_dev_inst struct, but needs
access to the file to properly add the probes to it.
Bert Vermeulen
Uwe Hermann
Alexandru Gagniuc
lelazary