Commit Graph

62 Commits

Author SHA1 Message Date
Bert Vermeulen fe9d5abefc agilent-dmm: Make protocol parser locale-independent. 2014-01-21 16:43:49 +01:00
Bert Vermeulen 67d6f6fca2 agilent-dmm: Shorten vendor name. 2014-01-20 19:07:48 +01:00
Martin Ling 3544f848e0 Centralise duplicated logging helper defines. 2013-12-27 12:54:05 +01:00
Bert Vermeulen 854434de0b Use std_serial_dev_open(). 2013-12-07 21:54:08 +01:00
Bert Vermeulen d43b090816 std: Standardize function name.
std_dev_acquisition_stop_serial() is now std_serial_dev_acquisition_stop().
2013-12-07 21:23:39 +01:00
Martin Ling bf2c987fde Use std_serial_dev_close() to replace matching dev_close functions. 2013-12-07 19:43:47 +00:00
Martin Ling abc4b3356d Route sr_source_add for all serial devices through a serial_source_add wrapper. 2013-12-07 19:43:47 +00:00
Martin Ling 8f996b8948 probe_groups: API changes required to implement probe groups. 2013-11-08 01:03:16 +01:00
Daniel Thompson fbf07e0209 agilent-dmm: Fix SEGV during incomplete reply from meter.
If buf contains exactly the string "Agilent Technologies" (for example if
there are bugs in the timeout logic or serial driver causing the reply from
the meter to be abridged) then this code will SEGV. This is because tokens[1]
is NULL but only tokens[2] and tokens[3] (both of which are undefined) are
NULL checked.

Can be trivially corrected by NULL checking tokens[1] as well.

Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
2013-10-04 13:30:49 +02:00
Uwe Hermann ce4d26ddf9 Various cosmetics, whitespace, consistency fixes. 2013-07-31 13:09:48 +02:00
Uwe Hermann 3b412e3a30 s/clear_instances/dev_clear/.
Consistently use the same name for the dev_clear() API callback
everywhere.
2013-06-02 16:56:41 +02:00
Uwe Hermann f6beaac55c std: Drop hw_ from function names.
The per-driver API calls no longer have a hw_ prefix (e.g. hw_init()
became init() and so on), so drop the 'hw_' from the std versions
for those API callbacks too.
2013-06-02 16:46:18 +02:00
Uwe Hermann 676c28a846 agilent-dmm: Use std_dev_clear(). 2013-06-02 13:52:39 +02:00
Uwe Hermann 6078d2c996 Use consistent API callback function names.
This now matches what the 'new-driver' tool generates.
2013-05-10 20:01:37 +02:00
Uwe Hermann 2a052cc4d6 Use consistent naming for internal libtool helper libs.
This now also matches what the 'new-driver' tool generates.
2013-05-10 17:44:01 +02:00
Uwe Hermann 29a27196a1 s/DRIVER_LOG_DOMAIN/LOG_PREFIX/.
This is more correct anyway, and also a bit shorter and more readable.
2013-05-03 21:59:32 +02:00
Bert Vermeulen e73ffd4238 Enforce open device before config_set()/dev_acquisition_start() 2013-04-24 22:03:50 +02:00
Uwe Hermann 50985c2019 GPL headers: Use correct project name. 2013-04-23 22:24:30 +02:00
Bert Vermeulen fb3a150599 agilent-dmm: Use sr_dev_inst to store connection handle 2013-04-21 21:49:15 +02:00
Bert Vermeulen bd6fbf628a drivers: return SR_ERR_NA on unsupported config key
Fixes bug 89.
2013-04-16 11:00:55 +02:00
Bert Vermeulen e44ac12a29 agilent-dmm: Adjust to GVariant-based sr_config_* functions 2013-04-11 18:32:07 +02:00
Uwe Hermann cd2f0fe22c Add/use std_hw_dev_acquisition_stop_serial(). 2013-02-08 23:32:45 +01:00
Uwe Hermann 6fab7b8f53 Driver struct cleanups.
- Explicitly list .config_get in all drivers for consistency, and set it
   to NULL if unused (whether or not a driver implements it is optional).

 - List all 'struct sr_dev_driver' entries in the same order in all drivers.

 - Move the check whether .config_set/.config_list exist (i.e., are non-NULL)
   into sanity_check_all_drivers().
2013-02-07 10:58:35 +01:00
Uwe Hermann 4afdfd4628 Add and use std_session_send_df_header().
This is a small helper function which sends the SR_DF_HEADER packet that
drivers usually emit in their hw_dev_acquisition_start() API callback.
It simplifies and shortens the hw_dev_acquisition_start() functions
quite a bit.

It also simplifies the input modules which send an SR_DF_HEADER packet, too.

This patch also automatically removes some unneeded malloc/free in some
drivers for the 'packet' and 'header' structs used for SR_DF_HEADER.
2013-02-07 10:46:28 +01:00
Uwe Hermann 961009b0c4 hw_dev_close(): Move common checks to wrapper.
Check the relevant arguments for != NULL before calling the actual
driver-specific function, so that the driver can safely assume those
arguments are non-NULL. This removes the need to duplicate these
checks in every driver.
2013-02-05 18:46:33 +01:00
Uwe Hermann 0e94d524c1 Shorten/simplify hw_dev_list() implementations. 2013-02-05 18:27:05 +01:00
Uwe Hermann 063e7aef6d Factor out common hw_init() driver code.
Most drivers do pretty much the same things in their hw_init()
right now, so factor out that code to std_hw_init() in std.c.
2013-01-29 12:56:02 +01:00
Bert Vermeulen 6a4710fac2 drivers: Trim unused config_get() calls
None of the driver config_get/set/list calls are required.
2013-01-25 16:05:48 +01:00
Bert Vermeulen 0d485e30c6 Deprecate SR_DI_HWOPTS.
This is replaced by SR_CONF_SCAN_OPTIONS.
2013-01-25 15:09:20 +01:00
Bert Vermeulen 9a6517d14b Deprecate SR_DI_HWCAPS.
This is replaced by SR_CONF_DEVICE_OPTIONS.
2013-01-25 15:01:49 +01:00
Bert Vermeulen a1c743fc51 drivers: implement config_list() 2013-01-25 02:37:26 +01:00
Bert Vermeulen 035a1078fd drivers: rename and reorganize config get/set
The driver API calls info_get() and dev_config_set() have been renamed
to config_get() and config_set(), respectively.
2013-01-24 19:19:09 +01:00
Bert Vermeulen 69e19dd769 Always interleave analog data with all enabled probes.
The new "probes" field in sr_datafeed_analog contains a copy
of all enabled struct sr_probe.
2013-01-23 03:40:44 +01:00
Bert Vermeulen 1953564a96 Rename SR_HWOPT_* and SR_HWCAP_* to SR_CONF_* 2013-01-21 23:32:50 +01:00
Bert Vermeulen 1987b8d63e drivers: use new sr_config struct
Sending an SR_DF_META packet at the start of every stream is not
mandatory; the frontend should ask for what it needs, and any extra
information the driver wants to send will come in due time.
2013-01-21 23:32:49 +01:00
Uwe Hermann 4ebd48b352 Remove non-error hw_info_get() messages.
Currently hw_info_get() can receive requests for entries (info_id) that
the specific driver doesn't support. That is (right now) a valid
use-case and not an error (might change later, though).

Thus, for now, don't output messages for such requests at all (certainly
not as sr_err() where they show up in e.g. sigrok-cli output per default).
2013-01-20 18:48:02 +01:00
Bert Vermeulen 6b8d6f93bb Get rid of obsolete SR_DI_NUM_PROBES and SR_DI_PROBE_NAMES.
Frontends should use the probe list in the device's sr_dev_inst
to get this information.
2013-01-15 17:42:23 +01:00
Uwe Hermann 35e199da50 Fix limit_samples check in various drivers.
Check whether a sample limit was actually set (> 0) before checking if
that sample limit is reached. This also fixes continuous acquisition mode
for drivers which have that.
2012-12-26 02:11:00 +01:00
Uwe Hermann 16d6e56d12 hardware/agilent-dmm/Makefile.am: Fix typo. 2012-12-18 02:25:17 +01:00
Peter Stuge 1ebe4b4e69 hw_init(): Save struct sr_context * parameter in struct drv_context 2012-12-03 12:07:40 +01:00
Peter Stuge 34f06b903e Add a struct sr_context * parameter to hw_init() 2012-12-03 12:07:40 +01:00
Uwe Hermann a54dd31e38 serial: Use OS-independent flags for serial port opening.
Add SERIAL_RDWR, SERIAL_RDONLY, and SERIAL_NONBLOCK (for now), which are
mapped to the respective OS-specific mechanism in serial_open().
2012-12-02 12:45:54 +01:00
Bert Vermeulen 109a3ba413 agilent-dmm: use new serial API 2012-11-12 02:25:37 +01:00
Bert Vermeulen 63f7cb9791 agilent-dmm: use standard serial_readline() 2012-11-07 01:25:10 +01:00
Bert Vermeulen 74ac7d7f73 agilent-dmm: no need to specify a serialcomm scan parameter
It's always 9600/8n1 anyway.
2012-11-07 00:46:30 +01:00
Bert Vermeulen 642e9d623c more deconstifying sr_dev_inst for dev_acquisition_stop() 2012-11-06 19:32:53 +01:00
Bert Vermeulen 69b07d14db allow for intermediate stage in stopping acquisition
In the case of USB drivers, a driver's dev_acquisition_stop() cannot
simply remove its fd sources from the session and close its devices:
a USB transfer might still be underway, and it needs to be finished
(and its memory freed) properly.

An sr_dev_inst->status value is added: SR_ST_STOPPING, which should
be set when the driver's dev_acquisition_stop() is called, and acts
as a marker for the USB event handler to wind up its operations.

In order for dev_acquisition_stop() to be able to set the sdi status,
however, it needs to be unconstified.
2012-11-06 15:16:22 +01:00
Uwe Hermann 886a52b6fb Return SR_ERR_MALLOC upon allocation errors.
Add some TODOs.
2012-10-30 20:25:54 +01:00
Uwe Hermann 6f22a8ef2c Factor out serial_readline() to serial.c.
Only one (slightly different) variant remains in agilent-dmm, this will
be merged soon too, though.
2012-10-30 19:59:21 +01:00
Uwe Hermann 38d326e879 agilent-dmm: Use message logging helpers. 2012-10-30 19:35:35 +01:00