The 'period' member of the VCD output module's context is supposed to
hold frequencies that correspond to the timescale used during export.
An 'int' (in combination with VCD's 1/10/100 constraint) thus would
result in a 1GHz limit, use uint64_t instead to support higher rates.
Iterate over the received sample set first, before iterating over the
respective sample's number of channels. This avoids redundant extraction
of sampled bits (which saves only little), but also increases locality
of processed data (though string accumulation still may be expensive).
It also adds the future option of RLE compression during accumulation of
output data, which perfectly matches the WaveDrom syntax for repeated
bit patterns.
Rearrange the order of routines in the wavedrom output module. Keep the
flow of .receive() -> .process_logic() -> .wavedrom_render() in one common
group of routines, which is not disrupted by the .init() and .cleanup()
routines which are kind of boilerplate in the source file. This increases
readability and maintainability.
Adjust brace style, use C language comments, drop camel case. Use size_t
for indices and offsets. Unobfuscate the open/close logic of rendered
output. Allocate zero-filled memory, reduce sizeof() redundancy. Don't
SHOUT in the module's .name property.
[ Changes indentation, see 'git diff -w -b' for review. ]
Add a comment on the logic which skips the upper 64 bytes of a 512 bytes
chunk in the Asix Sigma's sample memory. Move the initial assignment and
the subsequent update from a value which was retrieved from a hardware
register closer together for awareness during maintenance. Pre-setting a
high position value that will never match when the feature is not in use
is very appropriate.
Adjust the sigma_read_pos() routine to handle triggerpos identically to
stoppos. The test condition's intention is to check whether a decrement
of the position ends up in the meta data section of a chunk. The previous
implementation tested whether a pointer to the position variable ended in
0x1ff when decremented -- which is unrelated to the driver's operation.
It's assumed that no harm was done because the trigger feature is
unsupported (see bug #359).
This silences the compiler warning reported in bug #1411.
The handler for fluke 18x and 28x DMMs allocates several data
structures on the stack that are used after they have been freed when
creating a data feed packet.
Restructure the code so that all handlers send their own packets. As a
bonus, this avoid a couple of small heap allocations.
By separating the variables that holds the get and set values, the output
state, OVP and OCP can now be set while the acquisition is running.
Also some variables are named more clearly.
The communication with the rdtech power supplies is not very reliable,
especially during the start. Because of that, the driver tries to read the
modbus registers up to three times.
Nevertheless there is the chance, that the communication fails.
Introduce quirks support for devices which provide incomplete metadata.
Add conservative logic to unbreak the Logic Shrimp. Amend previously
received information when it was incomplete, but don't interfere if a
future firmware version fixes the issue.
Without this change, the device gets detected but "has zero channels"
and would be unusable. Because when a device provides metadata, these
details are used exclusively, no fallbacks apply.
There is no reason to close the entire device in acquisition_stop and
this actually breaks pulseview on serial devices using this callback
when running multiple acquisition cycles
This fixes bug #1271.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
The Mooshimeter driver uses mem*() and str*() library calls. Include the
<string.h> header file to silence compiler warnings.
...
./src/hardware/mooshimeter-dmm/protocol.c: In function 'lookup_tree_path':
./src/hardware/mooshimeter-dmm/protocol.c:275:3: warning: implicit declaration of function 'strchr' [-Wimplicit-function-declaration]
end = strchr(path, ':');
^
./src/hardware/mooshimeter-dmm/protocol.c:275:9: warning: incompatible implicit declaration of built-in function 'strchr' [enabled by default]
end = strchr(path, ':');
^
...
Even working BLE devices won't immediately succeed in the first call to
connect(2), which is why the "in progress" phase was added. But absent
peers made the previous implementation try forever, getting stuck in the
sr_bt_connect_ble() call.
Try to balance these two constraints. Do terminate BLE connect attempts
after a generous timeout. When this 20s period passed, there probably is
a configuration error or unresponsive peer. Yet the timeout needs to be
in this ballpark to not erroneously fail for working setups.
This adds support for the Mooshim Engineering BLE based Mooshimeter.
Because the meter requires raw BLE packets, the driver uses the BLE
layer directly. Since the meter has no physical way of configuring it,
the actual configuration is set entirely with sigrok device options.
When libsigrok is compiled with link-time-optimization, the linker
stumbles over the section named the same as the function. Whether this
is a compiler/linker bug or a coding error is unknown.
Renaming the special section (to the same as already used on OS X) avoids
the problem.
This fixes bug #1416.
Doxygen version 1.8.16 introduced an issue which breaks the compilation
of sigrok's C++ binding (https://github.com/doxygen/doxygen/issues/7190).
Don't set the FILE_PATTERNS variable at all, instead of assigning an
empty value. This resolves bug #1422.
This adds basic support for the Rigol MSO5000 series. It has
the same problems as the DS4000 series: Live capture provides
one digital channel per byte. Buffered memory returns the data
compressed (one byte has 8 digital channels), but the banks are
read separately. It's not possible to read uint16.
Introduce the lcr/vc4080.c source file which implements the parser for
the serial data stream of the Voltcraft 4080 LCR meter. Add the meter to
the list of supported devices in the serial-lcr driver, as well as the
PeakTech 2165 LCR meter which is another compatible device.
This implementation contains a workaround for USB based serial cables
which seem to suffer from incomplete parity handling (observed with the
FT232R based PeakTech cable). Similar approaches were seen in existing
DMM drivers.
This implementation supports the main and secondary displays. The D and Q
"displays" which are communicated in the serial packets appear unreliable
and redundant, users can have the D and Q values shown in the supported
displays.
Commit cb5cd1538f introduced packet request support in the serial-lcr
device driver. Calls were added to the detection of the device's
presence, and the periodic acquisition of measurement data. Add another
call to the device configuration retrieval that follows the presence
detection, without it communication timed out with no data received.
Also slightly raise the timeout for this device configuration gathering
phase. With one second sharp, the VC4080 was detected, but getting its
current configuration kept failing. This device's serial communication
is extra slow (1200 bps) and the packets are rather large (39 bytes).
Which made the stream detect's receive routine stop checking for the
availability of more data while a packet was being received.
Move the initial device probe (LCR packet validity check), the creation
of the device instance after successful probe, and the subsequent packet
inspection after resource allocation out of the scan routine. This shall
improve readability of the serial-lcr driver's probe logic, and reduces
diffs when handling of multiple connections gets added later.
Add a developer comment, the serial-lcr driver needs to handle multiple
connections when the conn= spec is ambiguous (multiple cables of the
same type, with the same VID:PID).
The HID transport for serial communication was rather noisy at log
levels of 4 and above. Now that test coverage was increased and
operation is stable, drop a lot of the excessive and redundant debug
messages in regular code paths.
Gerhard Sittig
Marc Jacobi
Frank Stettner
Michał Janiszewski
Uwe Hermann
Adrian Godwin
Peter Åstrand
Sylvain Pelissier
Andreas Sandberg
Sylvain Munaut
Marc Schink
Derek Hageman
Stefan Brüns
Kate J. Temkin
Jan Luebbe
Sebastian Reichel
Miklos Marton
Elen Eisendle