Commit Graph

122 Commits

Author SHA1 Message Date
Bert Vermeulen 1987b8d63e drivers: use new sr_config struct
Sending an SR_DF_META packet at the start of every stream is not
mandatory; the frontend should ask for what it needs, and any extra
information the driver wants to send will come in due time.
2013-01-21 23:32:49 +01:00
Bert Vermeulen 6b8d6f93bb Get rid of obsolete SR_DI_NUM_PROBES and SR_DI_PROBE_NAMES.
Frontends should use the probe list in the device's sr_dev_inst
to get this information.
2013-01-15 17:42:23 +01:00
Uwe Hermann 7869340103 Shorten probe_names[] arrays everywhere.
Also, NULL-terminate all of them.
2012-12-26 00:16:07 +01:00
Uwe Hermann a873c5940c Consistently use 'di' as variable name.
Use 'di' consistently in all drivers as the name for a local, static
pointer to the respective driver's 'struct sr_dev_driver'.
2012-12-18 00:52:39 +01:00
Peter Stuge d4928d7102 hardware: Call libusb_error_name() in all USB-related error messages 2012-12-05 01:14:44 +01:00
Peter Stuge d4abb463a7 hardware: Make USB drivers use the libusb_context in struct sr_context 2012-12-03 12:07:40 +01:00
Peter Stuge 1ebe4b4e69 hw_init(): Save struct sr_context * parameter in struct drv_context 2012-12-03 12:07:40 +01:00
Peter Stuge 34f06b903e Add a struct sr_context * parameter to hw_init() 2012-12-03 12:07:40 +01:00
Uwe Hermann 64d33dc28e All drivers: Drop unneeded comments. 2012-11-11 18:09:11 +01:00
Bert Vermeulen 69b07d14db allow for intermediate stage in stopping acquisition
In the case of USB drivers, a driver's dev_acquisition_stop() cannot
simply remove its fd sources from the session and close its devices:
a USB transfer might still be underway, and it needs to be finished
(and its memory freed) properly.

An sr_dev_inst->status value is added: SR_ST_STOPPING, which should
be set when the driver's dev_acquisition_stop() is called, and acts
as a marker for the USB event handler to wind up its operations.

In order for dev_acquisition_stop() to be able to set the sdi status,
however, it needs to be unconstified.
2012-11-06 15:16:22 +01:00
Toshiaki Yoshida 0ab0cb942f zeroplus-logic-cube: Fix samplerate and trigger
- Default to 1MHz.
   The default sample rate is the lowest frequency (100Hz),
   but it takes a very long time until 128K memory is full.

 - Fix the 1MHz setting.

 - Use samplerate list.

 - Fix 10MHz frequency.

 - Fix trigger.

 - Change the size of memory according to the number of samples.

 - Add pre-trigger (capture ratio) setting.

 - Fix the first acquisition after power on.
2012-11-05 11:46:58 +01:00
Uwe Hermann 886a52b6fb Return SR_ERR_MALLOC upon allocation errors.
Add some TODOs.
2012-10-30 20:25:54 +01:00
Uwe Hermann 545f978639 config.h usage cleanups.
- Drop config.h #include from files that don't actually use any of
   its contents (at the moment).

 - Add comment for those that do need it.
2012-10-24 00:41:21 +02:00
Bert Vermeulen e9022f596d sr: make struct drv_context global 2012-09-11 21:27:26 +02:00
Bert Vermeulen 811deee4af sr/drivers: add API calls sr_dev_inst_list() and sr_dev_inst_clear()
These are used to list the device instances currently known to the driver,
and clear that list.

Drivers that don't necessarily clear their list of instances on every scan,
such as genericdmm, need to provide these to the frontend to keep instance
management sane.
2012-08-06 00:59:25 +02:00
Bert Vermeulen 014359e329 sr/drivers: obsolete SR_HWCAP_PROBECONFIG
Since probes now live in a struct sr_dev_inst owned by the driver, it
already knows about them. Instead of a frontend telling the driver to
configure probes, all driver now do this just before starting acquisition.
2012-08-05 18:56:12 +02:00
Bert Vermeulen fabe59b326 sr: drivers using sr_usb_dev_inst_new() must free it properly as well
sr_usb_dev_inst_free() doesn't really do anything, but it might one
day.
2012-08-04 12:21:02 +02:00
Bert Vermeulen 310e9e9be4 zeroplus: use driver-private storage for instances 2012-08-03 11:29:00 +02:00
Bert Vermeulen 6f57fd9694 sr: remove obsolete SR_DI_INST 2012-08-03 11:29:00 +02:00
Bert Vermeulen b35c829306 sr/drivers: fix off-by-one if frontend-initiated probe configuration 2012-08-03 11:29:00 +02:00
Bert Vermeulen 9e90dcba9c sr/drivers: remove driver API call dev_status_get()
It's obsolete: no frontend ever used it, and neither did libsigrok.
The sdi->status field is only used internally by some drivers, and
should probably be moved to the driver-specific context structs.
2012-08-03 11:27:31 +02:00
Bert Vermeulen 3f848bb7a9 zeroplus: comment out 32-probe models for now 2012-08-03 11:27:31 +02:00
Bert Vermeulen 428edbe13d zeroplus-logic-cube: fix scan to correctly find model 2012-08-03 11:27:31 +02:00
Bert Vermeulen 3ffb6964a1 sr/drivers: change driver dev_acquisition_start/_stop calls to use sdi 2012-08-03 11:27:31 +02:00
Bert Vermeulen 25a0f108f4 sr/drivers: change driver dev_open/dev_close calls to use sdi 2012-08-03 11:27:31 +02:00
Bert Vermeulen 6f4b1868e8 sr/drivers: use sr_dev_inst instead of device index for dev_config_set()
All driver API calls using device index as a parameter will instead use a
const struct sr_dev_inst.
2012-08-03 10:27:39 +02:00
Bert Vermeulen 444adea232 zeroplus-logic-cube: don't use deprecated hwcap_get_all() driver API call 2012-08-03 10:27:39 +02:00
Bert Vermeulen 626409abfb zeroplus-logic-cube: use new driver info_get() API call 2012-08-03 10:27:38 +02:00
Bert Vermeulen 7da6f9d54a zeroplus-logic-cube: init and scan fixes
libusb context needs to be initialized only once, not ever scan.
Every scan invalidates the last one, so clean up any previous run's
results first.
2012-08-03 10:27:38 +02:00
Bert Vermeulen 4ca3898445 zeroplus-logic-cube: use new scan API 2012-08-03 10:27:38 +02:00
Bert Vermeulen 3275654708 zeroplus-logic-cube: use driver struct-based device instance list 2012-08-03 10:27:38 +02:00
Bert Vermeulen 61136ea603 sr: add new driver API call: scan()
This changes the semantics of the init() call as well. That now only
initializes the driver -- an administrative affair, no hardware gets
touched during this call. It returns a standard SR_OK or SR_ERR* code.

The scan() call does a discovery run for devices it knows, and returns
the number found. It can be called at any time.
2012-08-03 10:27:36 +02:00
Bert Vermeulen 40dda2c3a5 sr: remove unused argument from hardware driver function init()
It was actually used in one way: the session file loaded abused it for
passing in the filename -- something it definitely wasn't intended for.
This now uses the proper way to pass arguments to a driver: the new
SR_HWCAP_SESSIONFILE.

The OLS driver could also use it as an indication of the serial port to
use instead of actively probing all serial ports on the system, but there
wasn't any frontend code that passed in such a parameter, making it
entirely useless. That will soon be handled differently with the new
scan() API call, regardless.
2012-08-03 10:27:36 +02:00
Bert Vermeulen 45c59c8bdd sr: moved sigrok.h so libsigrok/libsigrok.h
All frontends will have to include <libsigrok/libsigrok.h> from now on.
This header includes proto.h and version.h, both installed from the
distribution into $INCLUDE/libsigrok/ as well.

The only dynamically changed header is now version.h, which has both
libsigrok and libtool compile-time versions in it.
2012-07-05 01:17:28 +02:00
Joel Holdsworth a533743dd1 sr: Made sample rate lists const 2012-05-31 19:51:11 +01:00
Joel Holdsworth 1b79df2f57 sr: Made the dev_config_set parameter a const pointer 2012-05-31 19:51:11 +01:00
Joel Holdsworth b7f578bef5 sr: Made the dev_info_get return value const 2012-05-31 19:51:10 +01:00
Joel Holdsworth 915f7cc87a sr: Made hwcap const 2012-05-31 19:51:09 +01:00
Bert Vermeulen f366e86c68 sr: change all drivers to use SR_DF_META_LOGIC 2012-05-30 23:55:36 +02:00
Uwe Hermann 8fdecced96 sr: Consistently use ZEROPLUS spelling.
This is the version used throughout their website, let's use it.
2012-05-30 23:23:14 +02:00
Uwe Hermann 6752905e6b sr: zeroplus: Fix segfault, add debug output.
There are various ZEROPLUS models with different probe numbers. For now
hardcode to 16 (for the popular LAP-C(16032)). This will need to be
fixed in a dynamic way later.

This fixes a segfault due to only 16 probe-names being defined, but the
drivers returning 32 as probecount.

Also, add some additional debug output.
2012-04-26 23:18:05 +02:00
Uwe Hermann 590b9f9a91 sr: Fix some samplerate fields. 2012-03-24 22:32:47 +01:00
Uwe Hermann ebc3473882 sr: s/err/ret/ for consistency.
We use ret, err, error, and others for return codes of functions.
Standardize on 'ret' for consistency reasons for now.
2012-03-21 23:20:06 +01:00
Uwe Hermann 3cd3a20b35 sr: More callback param renames.
Start/stop acquisition callbacks: Consistently name the 'void *' parameter
cb_data for now. The per-device-instance device pointer is called
'session_dev_id' everywhere for now, but this should be renamed to
something more clear.
2012-03-04 15:10:09 +01:00
Uwe Hermann 1f9813eb6c sr: Name all callback data 'cb_data'. 2012-03-02 02:25:42 +01:00
Uwe Hermann 31ccebc492 sr: s/sr_session_bus/sr_session_send/. 2012-03-01 23:49:25 +01:00
Uwe Hermann c09f0b578c sr/cli/gtk/qt/: s/plugin/driver/. 2012-02-28 23:52:30 +01:00
Bert Vermeulen 2285cf9bc5 sr: code cleanup 2012-02-28 17:47:02 +01:00
Uwe Hermann d261dbbfcc sr: Fix/document probe names. 2012-02-28 01:09:29 +01:00
Uwe Hermann ea9cfed7a5 sr: Consistent ctx name for per-dev-inst context. 2012-02-18 18:07:42 +01:00