libsigrok/hardware/openbench-logic-sniffer/protocol.h

118 lines
3.7 KiB
C

/*
* This file is part of the libsigrok project.
*
* Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef LIBSIGROK_HARDWARE_OPENBENCH_LOGIC_SNIFFER_PROTOCOL_H
#define LIBSIGROK_HARDWARE_OPENBENCH_LOGIC_SNIFFER_PROTOCOL_H
#include <stdint.h>
#include <string.h>
#include <glib.h>
#include "libsigrok.h"
#include "libsigrok-internal.h"
#define LOG_PREFIX "ols"
#define NUM_PROBES 32
#define NUM_TRIGGER_STAGES 4
#define TRIGGER_TYPE "01"
#define SERIAL_SPEED B115200
#define CLOCK_RATE SR_MHZ(100)
#define MIN_NUM_SAMPLES 4
#define DEFAULT_SAMPLERATE SR_KHZ(200)
/* Command opcodes */
#define CMD_RESET 0x00
#define CMD_RUN 0x01
#define CMD_TESTMODE 0x03
#define CMD_ID 0x02
#define CMD_METADATA 0x04
#define CMD_SET_FLAGS 0x82
#define CMD_SET_DIVIDER 0x80
#define CMD_CAPTURE_SIZE 0x81
#define CMD_SET_TRIGGER_MASK 0xc0
#define CMD_SET_TRIGGER_VALUE 0xc1
#define CMD_SET_TRIGGER_CONFIG 0xc2
/* Trigger config */
#define TRIGGER_START (1 << 3)
/* Bitmasks for CMD_FLAGS */
/* 12-13 unused, 14-15 RLE mode (we hardcode mode 0). */
#define FLAG_INTERNAL_TEST_MODE (1 << 11)
#define FLAG_EXTERNAL_TEST_MODE (1 << 10)
#define FLAG_SWAP_PROBES (1 << 9)
#define FLAG_RLE (1 << 8)
#define FLAG_SLOPE_FALLING (1 << 7)
#define FLAG_CLOCK_EXTERNAL (1 << 6)
#define FLAG_CHANNELGROUP_4 (1 << 5)
#define FLAG_CHANNELGROUP_3 (1 << 4)
#define FLAG_CHANNELGROUP_2 (1 << 3)
#define FLAG_CHANNELGROUP_1 (1 << 2)
#define FLAG_FILTER (1 << 1)
#define FLAG_DEMUX (1 << 0)
/* Private, per-device-instance driver context. */
struct dev_context {
/* Fixed device settings */
int max_probes;
uint32_t max_samples;
uint32_t max_samplerate;
uint32_t protocol_version;
/* Acquisition settings */
uint64_t cur_samplerate;
uint32_t cur_samplerate_divider;
uint64_t limit_samples;
int capture_ratio;
int trigger_at;
uint32_t probe_mask;
uint32_t trigger_mask[4];
uint32_t trigger_value[4];
int num_stages;
uint16_t flag_reg;
/* Operational states */
unsigned int num_transfers;
unsigned int num_samples;
int num_bytes;
/* Temporary variables */
unsigned int rle_count;
unsigned char sample[4];
unsigned char tmp_sample[4];
unsigned char *raw_sample_buf;
};
SR_PRIV extern const char *ols_probe_names[NUM_PROBES + 1];
SR_PRIV int send_shortcommand(struct sr_serial_dev_inst *serial,
uint8_t command);
SR_PRIV int send_longcommand(struct sr_serial_dev_inst *serial,
uint8_t command, uint8_t *data);
SR_PRIV int ols_configure_probes(const struct sr_dev_inst *sdi);
SR_PRIV struct dev_context *ols_dev_new(void);
SR_PRIV struct sr_dev_inst *get_metadata(struct sr_serial_dev_inst *serial);
SR_PRIV int ols_set_samplerate(const struct sr_dev_inst *sdi,
uint64_t samplerate);
SR_PRIV void abort_acquisition(const struct sr_dev_inst *sdi);
SR_PRIV int ols_receive_data(int fd, int revents, void *cb_data);
#endif