BLAHAJ
/
libsigrok
10
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
libsigrok/NEWS

498 lines
20 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

0.3.0 (2014-05-06)
------------------
Note: This release DOES change the libsigrok API. That means it is NOT
backwards-compatible and frontends will need updates.
* New supported hardware:
- Logic analyzers:
- ChronoVu LA16
- Sysclk LWLA1034
- Oscilloscopes:
- Agilent DSO1000 series (various models)
- Hameg HMO compact series (various models)
- Rigol DS2000 series (various models)
- Rigol VS5000 series (various models)
- Multimeters:
- BBC Goerz Metrawatt M2110
- Brymen BM869
- Fluke 189
- Gossen Metrawatt MetraHIT 1x/2x series (various models)
- Tenma 72-7745 (rebadged UNI-T UT60E)
- Tenma 72-7750 (rebadged UNI-T UT60G)
- UNI-T UT60G
- UNI-T UT61B
- UNI-T UT61C
- V&A VA40B
- Voltcraft M-3650CR
- Voltcraft ME-42
- Thermometers:
- APPA 55II
- Programmable power supplies:
- Atten PPS3000 series (various models, tested on PPS3203T-3S).
- Conrad DIGI 35 CPU
* Add support for channel groups.
* Add generic SCPI backend code which can be used via various transports:
- Serial ports
- USBTMC
- TCP/RAW
- TCP/Rigol (Rigol-VS5000 series specific)
- VXI
- librevisa
* udev rules file: Add entries for newly supported hardware.
* New config keys:
- SR_CONF_DEMODULATOR
- SR_CONF_CENTER_FREQUENCY
- SR_CONF_NUM_LOGIC_CHANNELS
- SR_CONF_NUM_ANALOG_CHANNELS
- SR_CONF_CLOCK_EDGE
- SR_CONF_POWER_SUPPLY
- SR_CONF_OUTPUT_VOLTAGE
- SR_CONF_OUTPUT_VOLTAGE_MAX
- SR_CONF_OUTPUT_CURRENT
- SR_CONF_OUTPUT_CURRENT_MAX
- SR_CONF_OUTPUT_ENABLED
- SR_CONF_OUTPUT_CHANNEL
- SR_CONF_OVER_VOLTAGE_PROTECTION
- SR_CONF_OVER_CURRENT_PROTECTION
- SR_CONF_DEVICE_MODE
- SR_CONF_TEST_MODE
* New config info types:
- SR_T_INT32
* New measurement quantity keys:
- SR_MQ_TIME
* New measurement quantity flags:
- SR_MQFLAG_DURATION
- SR_MQFLAG_AVG
* New device instance types:
- SR_INST_SCPI
* New error codes:
- SR_ERR_CHANNEL_GROUP
∗ The SR_T_CHAR config type has been renamed to SR_T_STRING.
* New build dependencies:
- libserialport >= 0.1.0 (optional).
- All drivers that talk to serial ports now require libserialport.
- If libserialport is not found, those drivers will not be built.
- librevisa >= 0.0.20130812 (optional, only used by some drivers).
* Dropped build dependecies:
- libasound2 is no longer required (only the removed alsa driver used it).
- libudev is no longer required (only the removed link-mso19 driver used it).
* Serial port handling code:
- Add support for 5/6 data bits and non-standard baud rates.
- Fix an issue related to nonblocking reads (bug #188).
- Fix an 'invalid arguments' condition causing problems (bug #192).
* alsa: This driver was removed (also fixes bugs #28, #61, #96, #114).
* asix-sigma:
- Publish SR_CONF_CAPTURE_RATIO correctly (bugs #287, #291).
- Don't set invalid config options (bug #86).
- Various other bugfixes.
* cem-dt-885x: Fix a code portability issue (bug #267).
* chronovu-la:
- Rename the 'chronovu-la8' driver to 'chronovu-la'.
- Add support for the ChronoVu LA16.
- Fix a segfault when doing multiple acquisitions on an LA8 (bug #247).
- Document that streaming is not possible for LA8/LA16 (bug #261).
* demo:
- Add support for analog channels (bug #11).
- Make the number of channels user-configurable.
- Add per-channel-group options.
- Implement analog sample patterns: sine, triangle, sawtooth.
- Fix a samplerate related issue with rates >= 50kHz (bugs #294, #295).
- Fix an issue causing data glitches every 40ms (bug #297).
- Fix an issue related to channel group handling (bug #262).
* digitek-dt4000zc: Fix driver on NetBSD due to missing DTR=1 (bug #189).
* fx2lafw:
- Fix incorrect unitsize when a trigger fires (bug #182).
- Implement config_get() for SR_CONF_LIMIT_SAMPLES.
- Don't send more samples than requested to the session bus.
* gmc-mh-1x-2x:
- Add new (sub)driver 'gmc-mh-2x-bd232'.
- Add support for the SI232-II interface.
* hameg-hmo:
- Fix a build issue on Mac OS X (bug #216).
- Various fixes related to frame limit, samplerate, options, etc.
* link-mso19: Drop unfinished driver for now (until it starts working).
* openbench-logic-sniffer:
- Fix a serial port related issue/hang, seen on (e.g.) NetBSD.
- Fix an SR_CONF_PATTERN_MODE related problem (bugs #184, #190).
- Fix a serial (non)blocking mode issue (bug #231).
- Temporarily disable the driver on Windows (needs portability fixes).
- Fix an endianness issue in the protocol handling (bug #135).
- Fix a sampling issue when (samples % 4) != 0 (bug #200).
- Fix an issue occuring when all channels were disabled (bugs #316, #347).
- Add an option to turn test patterns off again (bug #293).
* rigol-ds:
- Rename the 'rigol-ds1xx2' driver to 'rigol-ds'.
- Add support for more models and unify the driver code (bug #212).
- Add support for RS232 connectivity (previously only USBTMC worked).
- Enable the driver on non-Linux platforms since all transports the driver
uses are provided by cross-platform code/libs now (e.g. serial, USBTMC).
- Add support for 4 channels (required by some models).
- Add support for channel groups.
- Advertise SR_CONF_LIMIT_FRAMES support.
- Fix an issue with SR_DF_END sending.
- Enable/disable LA pod when (de)selecting digital channels.
- Disable key lock when closing device.
- Work around issues due to DS1000 specific protocol changes (bug #283).
- Fix incorrect digital channel numbers on some models (bug #269).
- Fix an issue with partial data reads (bugs #220, #209, #207).
* saleae-logic16:
- Fix an issue related to USB device claiming (bug #159).
- Don't send more samples than requested to the session bus (bug #350).
- Use unitsize 1 (not 2) if none of channels 8-15 are used.
* serial-dmm: Fix some parse issues by increasing a timeout.
* sysclk-lwla: Fix a sampling issue related to a glib API call (bug #270).
* uni-t-ut32x: Fix typo which prevented usage with multiple devices.
* victor-dmm: Fix MIN/MAX always being reported (bug #228).
* zeroplus-logic-cube:
- Add support for 32-channel models and additional memory sizes.
- Fix a frontend issue due to missing SR_CONF_CAPTURE_RATIO.
- Fix an issue causing pre-trigger garbage data to be sent (bug #222).
- Add initial voltage threshold support.
* Various drivers:
- Expose missing SR_CONF_TRIGGER_TYPE.
- Report max. possible number of samples (bugs #197, #258, #263).
* Output modules:
- Skip analog channels in logic-only output formats.
- Remove the obolete output module API, add wrapper calls for the new one.
- Stop using the obsolete output API (bugs #288, #47, #48).
- Properly receive and handle samplerate metadata (bug #46).
* input/vcd: Abort with an error upon > 64 channels (bug #194).
* output/vcd:
- Fix output for more than 8 channels.
- Output timestamp only once per change.
- Minor whitespace changes of output files to make them more readable.
- Remove bogus $dumpvars and $dumpoff commands.
- Various bugfixes and portability fixes.
* output/csv:
- Remove a 64-channel limit (bug #193).
- Fix an issue resulting in incorrect trailing commas (bug #230).
- Fix an issue where all timestamps would be zero (bug #35).
* Rename 'probe' to 'channel' in all places, since libsigrok supports a lot
of gear where 'channel' fits better (bug #259).
* Change TRIGGER_SLOPE from SR_T_UINT64 to SR_T_STRING.
* Windows support improvements:
- Use libserialport (+other backend code) to fix serial devices (bug #91).
- Add serial source addition/removal backend code (bug #206).
- Add backend code for properly supporting USB based devices.
* Fix various memory leaks in the backend code.
* Fix some incorrect parsing of floating point numbers in the strutil code.
* Fix various endianness issues in backend code and drivers (bug #266).
* Fix a few issues related to incorrect parsing with non-ANSI-C locales
(bugs #271, #272, #273, #274).
* Fix an issue related to data being sent to the libsigrok session which
was not a multiple of the unit/sample size (bugs, #289, #290).
* Drop the es51922 DMM parser (replaced by the generic es519xx parser).
* libsigrok session files:
- The libsigrok session file format (for *.sr files) has changed, and the
file format 'version' field is bumped to 2. Older libsigrok versions will
not be able to handle version 2 files, but new libsigrok versions can
handle both version 1 and version 2 files. New libsigrok versions will
always write/output version 2 files.
- Fix an issue resulting in left-over temporary files (bug #276).
- Fix an issue with analog probes (unsupported) in *.sr files (bug #277).
- Fix an issue with missing samplerate from session files (bug #275).
* Improved API documentation.
* Major API changes (overview):
- Change various function/macro names related to the probe->channel rename.
- Change various functions due to the new channel group feature.
- All enums in the public API now have names (e.g. 'enum sr_mqflag').
- The lib no longer defineѕ names with _t suffix (POSIX reserved).
- New API calls:
- sr_session_dev_list()
- sr_session_save_init()
- sr_session_append()
- sr_config_commit()
- sr_output_new()
- sr_output_send()
- sr_output_free()
- Obsoleted and removed API calls:
- sr_filter_channels()
- 'struct sr_session' is now opaque (contents shouldn't be used directly).
- Please see the Doxygen API documentation for further details.
* Build system:
- Switch to a non-recursive automake setup (fewer files, faster builds).
- configure: Clearly mark required and optional libs.
0.2.2 (2013-11-04)
------------------
Note: This release does NOT change the libsigrok API. While new config keys,
config info types, and unit codes have been added (additional enum
entries / numbers), no existing interfaces were added/changed/removed.
Frontends should continue to work fine without recompiling or relinking.
* New supported hardware:
- Logic analyzers:
- Saleae Logic16
- Thermometers:
- Center 309
- UNI-T UT325
- Voltcraft K204
- Multimeters:
- ISOTECH IDM103N
- Metex M-4650CR
- Norma DM950
- Voltcraft M-4650CR
- Energy meters:
- EDF Teleinfo
* New config keys:
- SR_CONF_VOLTAGE_THRESHOLD
- SR_CONF_EXTERNAL_CLOCK
- SR_CONF_SWAP
- SR_CONF_ENERGYMETER
* New config info types:
- SR_T_DOUBLE_RANGE
* New units:
- SR_UNIT_REVOLUTIONS_PER_MINUTE
- SR_UNIT_VOLT_AMPERE
- SR_UNIT_WATT
- SR_UNIT_WATT_HOUR
* New input modules:
- csv (comma-separated values)
* Bump required libzip version to >= 0.10.
* uni-t-dmm: This driver now requires the specification of the USB VID/PID
of the cable that is used. Example for sigrok-cli:
- Old: sigrok-cli --driver voltcraft-vc820 ...
- New: sigrok-cli --driver voltcraft-vc820:conn=1a86.e008 ...
* openbench-logic-sniffer:
- Initial test pattern support (SR_CONF_PATTERN_MODE).
- Initial external clock support (SR_CONF_EXTERNAL_CLOCK).
- Initial channel swap support (SR_CONF_SWAP).
- Various minor fixes and improvements.
* When a frontend adds a device instance to a running session, start
acquisition on it. This helps with the collectd use-case where devices
can be removed and added dynamically while a session is running.
* rigol-ds1xx2: Support newer Linux kernels with USBTMC in /sys/class/usbmisc.
* rigol-ds1xx2: Also detect the Rigol DS1152E/DS1152D.
* agilent-dmm: Fix a segfault happening in certain cases.
* output/analog: Support all currently known MQFLAGs.
* Fix a minor compile issue due to an incorrect #include.
* Fix two compile issues on FreeBSD (bug #185).
* es519xx: New generic parser for various Cyrustek DMM ICs.
* es51922/fs9721/fs9922/metex14: Use diode MQFLAG (bug #141).
* voltcraft-vc830: Fix diode mode handling (bug #142).
* Add the missing HACKING file to the tarball.
* README.devices: Updates/notes for newly added devices.
0.2.1 (2013-08-07)
------------------
Note: This release does NOT change the libsigrok API. While new config keys,
config info types, and error codes have been added (additional enum
entries / numbers), no existing interfaces were added/changed/removed.
Frontends should continue to work fine without recompiling or relinking.
* New supported hardware:
- Logic analyzers:
- IKALOGIC Scanalogic-2
- IKALOGIC ScanaPLUS
- Sound level meters:
- CEM DT-8852
- Kecheng KC-330B
- Multimeters:
- UNI-T UT60A
- UNI-T UT60E
- Voltcraft M-3650D
- Voltcraft VC-830
* Drop the Tecpel DMM-8060 (doesn't have PC connectivity).
* New config keys:
- SR_CONF_SPL_WEIGHT_FREQ
- SR_CONF_SPL_WEIGHT_TIME
- SR_CONF_SPL_MEASUREMENT_RANGE
- SR_CONF_HOLD_MIN
- SR_CONF_HOLD_MAX
- SR_CONF_POWER_OFF
- SR_CONF_DATA_SOURCE
* New config info types:
- SR_T_UINT64_RANGE
* New error codes:
- SR_ERR_TIMEOUT
* Always link against libm, the math library (bug #115).
* Fix a bug in sr_si_string_u64() at al (bug #73).
* output/csv: Fix incorrect probe order.
* alsa: Fix a double-free issue (bug #129).
* zeroplus-logic-cube: Fix a bug in the driver cleanup code.
* ikalogic-scanalogic2: Use GET_REPORT (bug #130).
* uni-t-dmm: Fix a bug breaking the UNI-T UT61E (bug #136).
* Various internal consistency fixes and code cleanups.
* Improved Doxygen documentation.
* Fixed various memory leaks.
0.2.0 (2013-05-04)
------------------
Note: This release DOES change the libsigrok API. That means it is NOT
backwards-compatible and frontends will need updates.
* Support for analog sources (oscilloscopes, DMMs, data loggers) was added.
* New supported hardware:
- Logic analyzers:
- CWAV USBee DX
- ZEROPLUS LAP-16128U
- Oscilloscopes:
- Hantek DSO-2090 (USB scope)
- Rigol DS1052D
- Rigol DS1052E
- Rigol DS1102D
- Rigol DS1102E
- Multimeters:
- Agilent U1231A
- Agilent U1232A
- Agilent U1233A
- Brymen BM857
- Digitek DT4000ZC
- Fluke 187
- Fluke 189
- Fluke 287
- Fluke 289
- Fluke ScopeMeter 199B
- MASTECH MAS345
- Metex ME-31
- Metex M-3640D
- PCE PCE-DM32
- PeakTech 3410
- PeakTech 4370
- RadioShack 22-168
- RadioShack 22-805
- RadioShack 22-812
- Tecpel DMM-8060
- Tecpel DMM-8061
- TekPower TP4000ZC
- UNI-T UT61D
- UNI-T UT61E
- V&A VA18B
- Victor 70C
- Victor 86C
- Voltcraft VC-820
- Voltcraft VC-840
- Sound level meters:
- Colead SL-5868P
- Tondaj SL-814
- Temperature/humidity/CO loggers:
- Lascar EL-USB and EL-USB CO series (various models)
- MIC 98581
- MIC 98583
* The limitation of max. 64 digital probes has been removed in many places.
* Added generic DMM protocol parsers usable for various DMMs, over various
cables and/or transports (e.g. same protocol over serial or USB/HID):
- Cyrustek ES51922 binary protocol.
- Fortune Semiconductor FS9721_LP3/FS9721B binary protocol.
- Fortune Semiconductor FS9922-DMM3/DMM4 binary protocol.
- Metex 14-byte ASCII protocol.
- RadioShack 22-812 binary protocol.
* zeroplus-logic-cube driver:
- Fix acquisition at some specific samplerates. Only report valid ones.
- Default to a samplerate of 1MHz.
- Fix trigger code.
- Add pre-trigger (capture ratio) setting.
- Add support for the ZEROPLUS LAP-16128U.
* fx2lafw driver:
- Add support for the CWAV USBee DX. This requires the latest version of
the fx2lafw firmware files.
- Add support for wide sampling (i.e. 16 probes instead of just 8).
- Fix multi-stage (software) triggers.
- Fix various memory leaks, firmware upload timeout bugs, and other issues.
- Various performance and memory usage improvements in the driver.
* chronovu-la8 driver:
- Add support for newer LA8 versions with USB VID/PID 0403:8867.
* demo driver:
- Various bugfixes when setting time/sample limits.
* openbench-logic-sniffer driver:
- Don't try to scan all available serial ports for OLS devices. Instead,
the serial port to use now has to be specified by the user.
- Allow disabling RLE.
* udev rules file: Add many new entries for additional devices.
* New output formats:
- analog: Prints analog values and their unit (e.g. from scopes or DMMs).
* New input formats:
- vcd: Value Change Dump format
- wav: Waveform audio file format (for analog data)
* 'binary' input format: Add support for a 'samplerate' option.
* API related changes:
- There is generated Doxygen API documentation now.
- The header that frontends should include is: <libsigrok/libsigrok.h>.
There are other headers which are installed, but those are not meant to
be included directly by the frontends.
- There were numerous API changes, additions and removals, too many to list
here. Please check the source code or Doxygen API documentation for the
current set of API functions.
* Serial port code:
- Various improvements and fixes related to multiple parameters such as
directions, baudrate, flow control, and others.
- Add support for more baudrates (e.g. very low ones such as 600/1200)
that are used in some devices.
- Add support for setting DTR/RTS.
* gnuplot files: Add sample files for CWAV USBee DX (for 8/16 bit sampling).
* Documentation updates:
- Add a README.devices file which contains various notes for users of
libsigrok about device- and/or driver-specific issues.
- Update README, HACKING, and other documents.
- Updated build dependencies list.
- The following libs are needed in more recent versions now:
- glib (required): Now must be >= 2.32.0.
- libusb-1.0 (optional): Now must be >= 1.0.9.
- The following new libs were added as (optional) dependencies:
- libasound / alsa-lib (optional): >= 1.0
- check (optional, only needed for unit tests): >= 0.9.4
* Portability:
- Various compile fixes for Windows, FreeBSD/NetBSD/OpenBSD, and Mac OS X.
- Simplify/allow/fix cross-compilation of libsigrok.
- Various bugfixes for 32bit systems.
- Various endianness fixes.
* configure:
- Add a --disable-all-drivers option. This can be overridden by
additional --enable-<drivername> options to selectively enable only some.
- Improve autodetection of libraries, and only enable drivers for which
all required libraries were found.
* Add a test suite for libsigrok with a few unit tests (the list will grow).
0.1.1 (2012-05-30)
------------------
Note: This release does NOT change the libsigrok API.
* The 'saleae-logic' driver (which depends on the Saleae firmware), has
been replaced with the new 'fx2lafw' driver, which uses an open-source
firmware for Cypress FX2 chips which is also named 'fx2lafw'.
Details: http://sigrok.org/wiki/Fx2lafw
This new driver (+ firmware) currently supports the following devices:
- ARMFLY AX-Pro
- Braintechnology USB-LPS
- EE Electronics ESLA100
- EE Electronics ESLA201A
- Robomotic MiniLogic
- Robomotic BugLogic 3
- Saleae Logic
- USBee AX
- USBee SX
- All Cypress FX2 eval boards with stock Cypress VID/PID, including:
- Lcsoft Mini Board
- Braintechnology USB Interface V2.x
Only acquisition with 8 probes is supported so far. Support for 16 probes
and support for analog signal acquisition (on devices which have these
capabilities) will be added later.
* ASIX SIGMA driver:
- Add support for the ASIX SIGMA2. This requires the latest version of
the SIGMA/SIGMA2 firmware files.
Details: http://sigrok.org/wiki/Firmware
- Various bugfixes.
* ZEROPLUS Logic Cube LAP-C (16032): Fix a segfault.
* udev file: Add entries for Robomotic BugLogic 3, Velleman PCSU1000,
Ideofy LA-08, ARMFLY AX-Pro, and Braintechnology USB Interface V2.x.
* The zlib dependency has been removed (no longer needed).
* Fix compiling with "Homebrew" (Mac OS X).
* libsigrok now expects firmware files in $prefix/share/sigrok-firmware by
default (was $prefix/share/libsigrok/firmware before).
* Fix a Makefile.am bug which caused the generated ChangeLog files being
accidentally deleted upon 'make distclean'.
* ChronoVu LA8 input file format: Improve autodetection of the file format.
We now only accept files of the size 8388613 bytes (all LA8 files have
exactly this amount of bytes).
0.1.0 (2012-04-17)
------------------
* Initial release.
Reference in New Issue View Git Blame Copy Permalink