650 lines
15 KiB
C
650 lines
15 KiB
C
/*
|
|
* This file is part of the sigrok project.
|
|
*
|
|
* Copyright (C) 2010 Sven Peter <sven@fail0verflow.com>
|
|
* Copyright (C) 2010 Haxx Enterprises <bushing@gmail.com>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or
|
|
* without modification, are permitted provided that the following
|
|
* conditions are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <assert.h>
|
|
#include "analyzer.h"
|
|
#include "gl_usb.h"
|
|
#include "libsigrok-internal.h"
|
|
|
|
enum {
|
|
HARD_DATA_CHECK_SUM = 0x00,
|
|
PASS_WORD,
|
|
|
|
DEV_ID0 = 0x10,
|
|
DEV_ID1,
|
|
|
|
START_STATUS = 0x20,
|
|
DEV_STATUS = 0x21,
|
|
FREQUENCY_REG0 = 0x30,
|
|
FREQUENCY_REG1,
|
|
FREQUENCY_REG2,
|
|
FREQUENCY_REG3,
|
|
FREQUENCY_REG4,
|
|
MEMORY_LENGTH,
|
|
CLOCK_SOURCE,
|
|
|
|
TRIGGER_STATUS0 = 0x40,
|
|
TRIGGER_STATUS1,
|
|
TRIGGER_STATUS2,
|
|
TRIGGER_STATUS3,
|
|
TRIGGER_STATUS4,
|
|
TRIGGER_STATUS5,
|
|
TRIGGER_STATUS6,
|
|
TRIGGER_STATUS7,
|
|
TRIGGER_STATUS8,
|
|
|
|
TRIGGER_COUNT0 = 0x50,
|
|
TRIGGER_COUNT1,
|
|
|
|
TRIGGER_LEVEL0 = 0x55,
|
|
TRIGGER_LEVEL1,
|
|
TRIGGER_LEVEL2,
|
|
TRIGGER_LEVEL3,
|
|
|
|
RAMSIZE_TRIGGERBAR_ADDRESS0 = 0x60,
|
|
RAMSIZE_TRIGGERBAR_ADDRESS1,
|
|
RAMSIZE_TRIGGERBAR_ADDRESS2,
|
|
TRIGGERBAR_ADDRESS0,
|
|
TRIGGERBAR_ADDRESS1,
|
|
TRIGGERBAR_ADDRESS2,
|
|
DONT_CARE_TRIGGERBAR,
|
|
|
|
FILTER_ENABLE = 0x70,
|
|
FILTER_STATUS,
|
|
|
|
ENABLE_DELAY_TIME0 = 0x7a,
|
|
ENABLE_DELAY_TIME1,
|
|
|
|
ENABLE_INSERT_DATA0 = 0x80,
|
|
ENABLE_INSERT_DATA1,
|
|
ENABLE_INSERT_DATA2,
|
|
ENABLE_INSERT_DATA3,
|
|
COMPRESSION_TYPE0,
|
|
COMPRESSION_TYPE1,
|
|
|
|
TRIGGER_ADDRESS0 = 0x90,
|
|
TRIGGER_ADDRESS1,
|
|
TRIGGER_ADDRESS2,
|
|
|
|
NOW_ADDRESS0 = 0x96,
|
|
NOW_ADDRESS1,
|
|
NOW_ADDRESS2,
|
|
|
|
STOP_ADDRESS0 = 0x9b,
|
|
STOP_ADDRESS1,
|
|
STOP_ADDRESS2,
|
|
|
|
READ_RAM_STATUS = 0xa0,
|
|
};
|
|
|
|
static int g_trigger_status[9] = { 0 };
|
|
static int g_trigger_count = 1;
|
|
static int g_filter_status[8] = { 0 };
|
|
static int g_filter_enable = 0;
|
|
|
|
static int g_freq_value = 1;
|
|
static int g_freq_scale = FREQ_SCALE_MHZ;
|
|
static int g_memory_size = MEMORY_SIZE_8K;
|
|
static int g_ramsize_triggerbar_addr = 2 * 1024;
|
|
static int g_triggerbar_addr = 0;
|
|
static int g_compression = COMPRESSION_NONE;
|
|
|
|
/* Maybe unk specifies an "endpoint" or "register" of sorts. */
|
|
static int analyzer_write_status(libusb_device_handle *devh, unsigned char unk,
|
|
unsigned char flags)
|
|
{
|
|
assert(unk <= 3);
|
|
return gl_reg_write(devh, START_STATUS, unk << 6 | flags);
|
|
}
|
|
|
|
#if 0
|
|
static int __analyzer_set_freq(libusb_device_handle *devh, int freq, int scale)
|
|
{
|
|
int reg0 = 0, divisor = 0, reg2 = 0;
|
|
|
|
switch (scale) {
|
|
case FREQ_SCALE_MHZ: /* MHz */
|
|
if (freq >= 100 && freq <= 200) {
|
|
reg0 = freq * 0.1;
|
|
divisor = 1;
|
|
reg2 = 0;
|
|
break;
|
|
}
|
|
if (freq >= 50 && freq < 100) {
|
|
reg0 = freq * 0.2;
|
|
divisor = 2;
|
|
reg2 = 0;
|
|
break;
|
|
}
|
|
if (freq >= 10 && freq < 50) {
|
|
if (freq == 25) {
|
|
reg0 = 25;
|
|
divisor = 5;
|
|
reg2 = 1;
|
|
break;
|
|
} else {
|
|
reg0 = freq * 0.5;
|
|
divisor = 5;
|
|
reg2 = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (freq >= 2 && freq < 10) {
|
|
divisor = 5;
|
|
reg0 = freq * 2;
|
|
reg2 = 2;
|
|
break;
|
|
}
|
|
if (freq == 1) {
|
|
divisor = 5;
|
|
reg2 = 16;
|
|
reg0 = 5;
|
|
break;
|
|
}
|
|
divisor = 5;
|
|
reg0 = 5;
|
|
reg2 = 64;
|
|
break;
|
|
case FREQ_SCALE_HZ: /* Hz */
|
|
if (freq >= 500 && freq < 1000) {
|
|
reg0 = freq * 0.01;
|
|
divisor = 10;
|
|
reg2 = 64;
|
|
break;
|
|
}
|
|
if (freq >= 300 && freq < 500) {
|
|
reg0 = freq * 0.005 * 8;
|
|
divisor = 5;
|
|
reg2 = 67;
|
|
break;
|
|
}
|
|
if (freq >= 100 && freq < 300) {
|
|
reg0 = freq * 0.005 * 16;
|
|
divisor = 5;
|
|
reg2 = 68;
|
|
break;
|
|
}
|
|
divisor = 5;
|
|
reg0 = 5;
|
|
reg2 = 64;
|
|
break;
|
|
case FREQ_SCALE_KHZ: /* kHz */
|
|
if (freq >= 500 && freq < 1000) {
|
|
reg0 = freq * 0.01;
|
|
divisor = 5;
|
|
reg2 = 17;
|
|
break;
|
|
}
|
|
if (freq >= 100 && freq < 500) {
|
|
reg0 = freq * 0.05;
|
|
divisor = 5;
|
|
reg2 = 32;
|
|
break;
|
|
}
|
|
if (freq >= 50 && freq < 100) {
|
|
reg0 = freq * 0.1;
|
|
divisor = 5;
|
|
reg2 = 33;
|
|
break;
|
|
}
|
|
if (freq >= 10 && freq < 50) {
|
|
if (freq == 25) {
|
|
reg0 = 25;
|
|
divisor = 5;
|
|
reg2 = 49;
|
|
break;
|
|
}
|
|
reg0 = freq * 0.5;
|
|
divisor = 5;
|
|
reg2 = 48;
|
|
break;
|
|
}
|
|
if (freq >= 2 && freq < 10) {
|
|
divisor = 5;
|
|
reg0 = freq * 2;
|
|
reg2 = 50;
|
|
break;
|
|
}
|
|
divisor = 5;
|
|
reg0 = 5;
|
|
reg2 = 64;
|
|
break;
|
|
default:
|
|
divisor = 5;
|
|
reg0 = 5;
|
|
reg2 = 64;
|
|
break;
|
|
}
|
|
|
|
sr_dbg("zp: Setting samplerate regs (freq=%d, scale=%d): "
|
|
"reg0: %d, reg1: %d, reg2: %d, reg3: %d.",
|
|
freq, scale, divisor, reg0, 0x02, reg2);
|
|
|
|
if (gl_reg_write(devh, FREQUENCY_REG0, divisor) < 0)
|
|
return -1; /* Divisor maybe? */
|
|
|
|
if (gl_reg_write(devh, FREQUENCY_REG1, reg0) < 0)
|
|
return -1; /* 10 / 0.2 */
|
|
|
|
if (gl_reg_write(devh, FREQUENCY_REG2, 0x02) < 0)
|
|
return -1; /* Always 2 */
|
|
|
|
if (gl_reg_write(devh, FREQUENCY_REG4, reg2) < 0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* It seems that ...
|
|
* FREQUENCT_REG0 - division factor (?)
|
|
* FREQUENCT_REG1 - multiplication factor (?)
|
|
* FREQUENCT_REG4 - clock selection (?)
|
|
*
|
|
* clock selection
|
|
* 0 10MHz 16 1MHz 32 100kHz 48 10kHz 64 1kHz
|
|
* 1 5MHz 17 500kHz 33 50kHz 49 5kHz 65 500Hz
|
|
* 2 2.5MHz . . 50 2.5kHz 66 250Hz
|
|
* . . . . 67 125Hz
|
|
* . . . . 68 62.5Hz
|
|
*/
|
|
static int __analyzer_set_freq(libusb_device_handle *devh, int freq, int scale)
|
|
{
|
|
struct freq_factor {
|
|
int freq;
|
|
int scale;
|
|
int sel;
|
|
int div;
|
|
int mul;
|
|
};
|
|
|
|
static const struct freq_factor f[] = {
|
|
{ 200, FREQ_SCALE_MHZ, 0, 1, 20 },
|
|
{ 150, FREQ_SCALE_MHZ, 0, 1, 15 },
|
|
{ 100, FREQ_SCALE_MHZ, 0, 1, 10 },
|
|
{ 80, FREQ_SCALE_MHZ, 0, 2, 16 },
|
|
{ 50, FREQ_SCALE_MHZ, 0, 2, 10 },
|
|
{ 25, FREQ_SCALE_MHZ, 1, 5, 25 },
|
|
{ 10, FREQ_SCALE_MHZ, 1, 5, 10 },
|
|
{ 1, FREQ_SCALE_MHZ, 16, 5, 5 },
|
|
{ 800, FREQ_SCALE_KHZ, 17, 5, 8 },
|
|
{ 400, FREQ_SCALE_KHZ, 32, 5, 20 },
|
|
{ 200, FREQ_SCALE_KHZ, 32, 5, 10 },
|
|
{ 100, FREQ_SCALE_KHZ, 32, 5, 5 },
|
|
{ 50, FREQ_SCALE_KHZ, 33, 5, 5 },
|
|
{ 25, FREQ_SCALE_KHZ, 49, 5, 25 },
|
|
{ 5, FREQ_SCALE_KHZ, 50, 5, 10 },
|
|
{ 1, FREQ_SCALE_KHZ, 64, 5, 5 },
|
|
{ 500, FREQ_SCALE_HZ, 64, 10, 5 },
|
|
{ 100, FREQ_SCALE_HZ, 68, 5, 8 },
|
|
{ 0, 0, 0, 0, 0 }
|
|
};
|
|
|
|
int i;
|
|
|
|
for (i = 0; f[i].freq; i++) {
|
|
if (scale == f[i].scale && freq == f[i].freq)
|
|
break;
|
|
}
|
|
if (!f[i].freq)
|
|
return -1;
|
|
|
|
sr_dbg("zp: Setting samplerate regs (freq=%d, scale=%d): "
|
|
"reg0: %d, reg1: %d, reg2: %d, reg3: %d.",
|
|
freq, scale, f[i].div, f[i].mul, 0x02, f[i].sel);
|
|
|
|
if (gl_reg_write(devh, FREQUENCY_REG0, f[i].div) < 0)
|
|
return -1;
|
|
|
|
if (gl_reg_write(devh, FREQUENCY_REG1, f[i].mul) < 0)
|
|
return -1;
|
|
|
|
if (gl_reg_write(devh, FREQUENCY_REG2, 0x02) < 0)
|
|
return -1;
|
|
|
|
if (gl_reg_write(devh, FREQUENCY_REG4, f[i].sel) < 0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __analyzer_set_ramsize_trigger_address(libusb_device_handle *devh,
|
|
unsigned int address)
|
|
{
|
|
gl_reg_write(devh, RAMSIZE_TRIGGERBAR_ADDRESS0, (address >> 0) & 0xFF);
|
|
gl_reg_write(devh, RAMSIZE_TRIGGERBAR_ADDRESS1, (address >> 8) & 0xFF);
|
|
gl_reg_write(devh, RAMSIZE_TRIGGERBAR_ADDRESS2, (address >> 16) & 0xFF);
|
|
}
|
|
|
|
static void __analyzer_set_triggerbar_address(libusb_device_handle *devh,
|
|
unsigned int address)
|
|
{
|
|
gl_reg_write(devh, TRIGGERBAR_ADDRESS0, (address >> 0) & 0xFF);
|
|
gl_reg_write(devh, TRIGGERBAR_ADDRESS1, (address >> 8) & 0xFF);
|
|
gl_reg_write(devh, TRIGGERBAR_ADDRESS2, (address >> 16) & 0xFF);
|
|
}
|
|
|
|
static void __analyzer_set_compression(libusb_device_handle *devh,
|
|
unsigned int type)
|
|
{
|
|
gl_reg_write(devh, COMPRESSION_TYPE0, (type >> 0) & 0xFF);
|
|
gl_reg_write(devh, COMPRESSION_TYPE1, (type >> 8) & 0xFF);
|
|
}
|
|
|
|
static void __analyzer_set_trigger_count(libusb_device_handle *devh,
|
|
unsigned int count)
|
|
{
|
|
gl_reg_write(devh, TRIGGER_COUNT0, (count >> 0) & 0xFF);
|
|
gl_reg_write(devh, TRIGGER_COUNT1, (count >> 8) & 0xFF);
|
|
}
|
|
|
|
static void analyzer_write_enable_insert_data(libusb_device_handle *devh)
|
|
{
|
|
gl_reg_write(devh, ENABLE_INSERT_DATA0, 0x12);
|
|
gl_reg_write(devh, ENABLE_INSERT_DATA1, 0x34);
|
|
gl_reg_write(devh, ENABLE_INSERT_DATA2, 0x56);
|
|
gl_reg_write(devh, ENABLE_INSERT_DATA3, 0x78);
|
|
}
|
|
|
|
static void analyzer_set_filter(libusb_device_handle *devh)
|
|
{
|
|
int i;
|
|
gl_reg_write(devh, FILTER_ENABLE, g_filter_enable);
|
|
for (i = 0; i < 8; i++)
|
|
gl_reg_write(devh, FILTER_STATUS + i, g_filter_status[i]);
|
|
}
|
|
|
|
SR_PRIV void analyzer_reset(libusb_device_handle *devh)
|
|
{
|
|
analyzer_write_status(devh, 3, STATUS_FLAG_NONE); // reset device
|
|
analyzer_write_status(devh, 3, STATUS_FLAG_RESET); // reset device
|
|
}
|
|
|
|
SR_PRIV void analyzer_initialize(libusb_device_handle *devh)
|
|
{
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_NONE);
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_INIT);
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_NONE);
|
|
}
|
|
|
|
SR_PRIV void analyzer_wait(libusb_device_handle *devh, int set, int unset)
|
|
{
|
|
int status;
|
|
while (1) {
|
|
status = gl_reg_read(devh, DEV_STATUS);
|
|
if ((status & set) && ((status & unset) == 0))
|
|
return;
|
|
}
|
|
}
|
|
|
|
SR_PRIV void analyzer_read_start(libusb_device_handle *devh)
|
|
{
|
|
int i;
|
|
|
|
analyzer_write_status(devh, 3, STATUS_FLAG_20 | STATUS_FLAG_READ);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
(void)gl_reg_read(devh, READ_RAM_STATUS);
|
|
}
|
|
|
|
SR_PRIV int analyzer_read_data(libusb_device_handle *devh, void *buffer,
|
|
unsigned int size)
|
|
{
|
|
return gl_read_bulk(devh, buffer, size);
|
|
}
|
|
|
|
SR_PRIV void analyzer_read_stop(libusb_device_handle *devh)
|
|
{
|
|
analyzer_write_status(devh, 3, STATUS_FLAG_20);
|
|
analyzer_write_status(devh, 3, STATUS_FLAG_NONE);
|
|
}
|
|
|
|
SR_PRIV void analyzer_start(libusb_device_handle *devh)
|
|
{
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_NONE);
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_INIT);
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_NONE);
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_GO);
|
|
}
|
|
|
|
SR_PRIV void analyzer_configure(libusb_device_handle *devh)
|
|
{
|
|
int i;
|
|
|
|
/* Write_Start_Status */
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_RESET);
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_NONE);
|
|
|
|
/* Start_Config_Outside_Device ? */
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_INIT);
|
|
analyzer_write_status(devh, 1, STATUS_FLAG_NONE);
|
|
|
|
/* SetData_To_Frequence_Reg */
|
|
__analyzer_set_freq(devh, g_freq_value, g_freq_scale);
|
|
|
|
/* SetMemory_Length */
|
|
gl_reg_write(devh, MEMORY_LENGTH, g_memory_size);
|
|
|
|
/* Sele_Inside_Outside_Clock */
|
|
gl_reg_write(devh, CLOCK_SOURCE, 0x03);
|
|
|
|
/* Set_Trigger_Status */
|
|
for (i = 0; i < 9; i++)
|
|
gl_reg_write(devh, TRIGGER_STATUS0 + i, g_trigger_status[i]);
|
|
|
|
__analyzer_set_trigger_count(devh, g_trigger_count);
|
|
|
|
/* Set_Trigger_Level */
|
|
gl_reg_write(devh, TRIGGER_LEVEL0, 0x31);
|
|
gl_reg_write(devh, TRIGGER_LEVEL1, 0x31);
|
|
gl_reg_write(devh, TRIGGER_LEVEL2, 0x31);
|
|
gl_reg_write(devh, TRIGGER_LEVEL3, 0x31);
|
|
|
|
/* Size of actual memory >> 2 */
|
|
__analyzer_set_ramsize_trigger_address(devh, g_ramsize_triggerbar_addr);
|
|
__analyzer_set_triggerbar_address(devh, g_triggerbar_addr);
|
|
|
|
/* Set_Dont_Care_TriggerBar */
|
|
if (g_triggerbar_addr)
|
|
gl_reg_write(devh, DONT_CARE_TRIGGERBAR, 0x00);
|
|
else
|
|
gl_reg_write(devh, DONT_CARE_TRIGGERBAR, 0x01);
|
|
|
|
/* Enable_Status */
|
|
analyzer_set_filter(devh);
|
|
|
|
/* Set_Enable_Delay_Time */
|
|
gl_reg_write(devh, 0x7a, 0x00);
|
|
gl_reg_write(devh, 0x7b, 0x00);
|
|
analyzer_write_enable_insert_data(devh);
|
|
__analyzer_set_compression(devh, g_compression);
|
|
}
|
|
|
|
SR_PRIV void analyzer_add_trigger(int channel, int type)
|
|
{
|
|
switch (type) {
|
|
case TRIGGER_HIGH:
|
|
g_trigger_status[channel / 4] |= 1 << (channel % 4 * 2);
|
|
break;
|
|
case TRIGGER_LOW:
|
|
g_trigger_status[channel / 4] |= 2 << (channel % 4 * 2);
|
|
break;
|
|
#if 0
|
|
case TRIGGER_POSEDGE:
|
|
g_trigger_status[8] = 0x40 | channel;
|
|
break;
|
|
case TRIGGER_NEGEDGE:
|
|
g_trigger_status[8] = 0x80 | channel;
|
|
break;
|
|
case TRIGGER_ANYEDGE:
|
|
g_trigger_status[8] = 0xc0 | channel;
|
|
break;
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
SR_PRIV void analyzer_add_filter(int channel, int type)
|
|
{
|
|
int i;
|
|
|
|
if (type != FILTER_HIGH && type != FILTER_LOW)
|
|
return;
|
|
if ((channel & 0xf) >= 8)
|
|
return;
|
|
|
|
if (channel & CHANNEL_A)
|
|
i = 0;
|
|
else if (channel & CHANNEL_B)
|
|
i = 2;
|
|
else if (channel & CHANNEL_C)
|
|
i = 4;
|
|
else if (channel & CHANNEL_D)
|
|
i = 6;
|
|
else
|
|
return;
|
|
|
|
if ((channel & 0xf) >= 4) {
|
|
i++;
|
|
channel -= 4;
|
|
}
|
|
|
|
g_filter_status[i] |=
|
|
1 << ((2 * channel) + (type == FILTER_LOW ? 1 : 0));
|
|
|
|
g_filter_enable = 1;
|
|
}
|
|
|
|
SR_PRIV void analyzer_set_trigger_count(int count)
|
|
{
|
|
g_trigger_count = count;
|
|
}
|
|
|
|
SR_PRIV void analyzer_set_freq(int freq, int scale)
|
|
{
|
|
g_freq_value = freq;
|
|
g_freq_scale = scale;
|
|
}
|
|
|
|
SR_PRIV void analyzer_set_memory_size(unsigned int size)
|
|
{
|
|
g_memory_size = size;
|
|
}
|
|
|
|
SR_PRIV void analyzer_set_ramsize_trigger_address(unsigned int address)
|
|
{
|
|
g_ramsize_triggerbar_addr = address;
|
|
}
|
|
|
|
SR_PRIV void analyzer_set_triggerbar_address(unsigned int address)
|
|
{
|
|
g_triggerbar_addr = address;
|
|
}
|
|
|
|
SR_PRIV unsigned int analyzer_read_status(libusb_device_handle *devh)
|
|
{
|
|
return gl_reg_read(devh, DEV_STATUS);
|
|
}
|
|
|
|
SR_PRIV unsigned int analyzer_read_id(libusb_device_handle *devh)
|
|
{
|
|
return gl_reg_read(devh, DEV_ID1) << 8 | gl_reg_read(devh, DEV_ID0);
|
|
}
|
|
|
|
SR_PRIV unsigned int analyzer_get_stop_address(libusb_device_handle *devh)
|
|
{
|
|
return gl_reg_read(devh, STOP_ADDRESS2) << 16 | gl_reg_read(devh,
|
|
STOP_ADDRESS1) << 8 | gl_reg_read(devh, STOP_ADDRESS0);
|
|
}
|
|
|
|
SR_PRIV unsigned int analyzer_get_now_address(libusb_device_handle *devh)
|
|
{
|
|
return gl_reg_read(devh, NOW_ADDRESS2) << 16 | gl_reg_read(devh,
|
|
NOW_ADDRESS1) << 8 | gl_reg_read(devh, NOW_ADDRESS0);
|
|
}
|
|
|
|
SR_PRIV unsigned int analyzer_get_trigger_address(libusb_device_handle *devh)
|
|
{
|
|
return gl_reg_read(devh, TRIGGER_ADDRESS2) << 16 | gl_reg_read(devh,
|
|
TRIGGER_ADDRESS1) << 8 | gl_reg_read(devh, TRIGGER_ADDRESS0);
|
|
}
|
|
|
|
SR_PRIV void analyzer_set_compression(unsigned int type)
|
|
{
|
|
g_compression = type;
|
|
}
|
|
|
|
SR_PRIV void analyzer_wait_button(libusb_device_handle *devh)
|
|
{
|
|
analyzer_wait(devh, STATUS_BUTTON_PRESSED, 0);
|
|
}
|
|
|
|
SR_PRIV void analyzer_wait_data(libusb_device_handle *devh)
|
|
{
|
|
analyzer_wait(devh, STATUS_READY | 8, STATUS_BUSY);
|
|
}
|
|
|
|
SR_PRIV int analyzer_decompress(void *input, unsigned int input_len,
|
|
void *output, unsigned int output_len)
|
|
{
|
|
unsigned char *in = input;
|
|
unsigned char *out = output;
|
|
unsigned int A, B, C, count;
|
|
unsigned int written = 0;
|
|
|
|
while (input_len > 0) {
|
|
A = *in++;
|
|
B = *in++;
|
|
C = *in++;
|
|
count = (*in++) + 1;
|
|
|
|
if (count > output_len)
|
|
count = output_len;
|
|
output_len -= count;
|
|
written += count;
|
|
|
|
while (count--) {
|
|
*out++ = A;
|
|
*out++ = B;
|
|
*out++ = C;
|
|
*out++ = 0; /* Channel D */
|
|
}
|
|
|
|
input_len -= 4;
|
|
if (output_len == 0)
|
|
break;
|
|
}
|
|
|
|
return written;
|
|
}
|