344 lines
9.5 KiB
C
344 lines
9.5 KiB
C
/*
|
|
* This file is part of the libsigrok project.
|
|
*
|
|
* Copyright (C) 2012-2013 Uwe Hermann <uwe@hermann-uwe.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
/**
|
|
* @file
|
|
*
|
|
* Metex 14-bytes ASCII protocol parser.
|
|
*
|
|
* @internal
|
|
* This should work for various multimeters which use this kind of protocol,
|
|
* even though there is some variation in which modes each DMM supports.
|
|
*
|
|
* It does _not_ work for all Metex DMMs, some use a quite different protocol.
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include <ctype.h>
|
|
#include <math.h>
|
|
#include <glib.h>
|
|
#include "libsigrok.h"
|
|
#include "libsigrok-internal.h"
|
|
|
|
#define LOG_PREFIX "metex14"
|
|
|
|
/** Parse value from buf, byte 2-8. */
|
|
static int parse_value(const uint8_t *buf, struct metex14_info *info,
|
|
float *result)
|
|
{
|
|
int i, is_ol, cnt;
|
|
char valstr[7 + 1];
|
|
|
|
/* Strip all spaces from bytes 2-8. */
|
|
memset(&valstr, 0, 7 + 1);
|
|
for (i = 0, cnt = 0; i < 7; i++) {
|
|
if (buf[2 + i] != ' ')
|
|
valstr[cnt++] = buf[2 + i];
|
|
}
|
|
|
|
/* Bytes 5-7: Over limit (various forms) */
|
|
is_ol = 0;
|
|
is_ol += (!strcasecmp((const char *)&valstr, ".OL")) ? 1 : 0;
|
|
is_ol += (!strcasecmp((const char *)&valstr, "O.L")) ? 1 : 0;
|
|
is_ol += (!strcasecmp((const char *)&valstr, "OL.")) ? 1 : 0;
|
|
is_ol += (!strcasecmp((const char *)&valstr, "OL")) ? 1 : 0;
|
|
is_ol += (!strcasecmp((const char *)&valstr, "-.OL")) ? 1 : 0;
|
|
is_ol += (!strcasecmp((const char *)&valstr, "-O.L")) ? 1 : 0;
|
|
is_ol += (!strcasecmp((const char *)&valstr, "-OL.")) ? 1 : 0;
|
|
is_ol += (!strcasecmp((const char *)&valstr, "-OL")) ? 1 : 0;
|
|
if (is_ol != 0) {
|
|
sr_spew("Over limit.");
|
|
*result = INFINITY;
|
|
return SR_OK;
|
|
}
|
|
|
|
/* Logic functions */
|
|
if (!strcmp((const char *)&valstr, "READY") ||
|
|
!strcmp((const char *)&valstr, "FLOAT")) {
|
|
*result = INFINITY;
|
|
info->is_logic = TRUE;
|
|
} else if (!strcmp((const char *)&valstr, "Hi")) {
|
|
*result = 1.0;
|
|
info->is_logic = TRUE;
|
|
} else if (!strcmp((const char *)&valstr, "Lo")) {
|
|
*result = 0.0;
|
|
info->is_logic = TRUE;
|
|
}
|
|
if (info->is_logic)
|
|
return SR_OK;
|
|
|
|
/* Bytes 2-8: Sign, value (up to 5 digits) and decimal point */
|
|
sscanf((const char *)&valstr, "%f", result);
|
|
|
|
sr_spew("The display value is %f.", *result);
|
|
|
|
return SR_OK;
|
|
}
|
|
|
|
static void parse_flags(const char *buf, struct metex14_info *info)
|
|
{
|
|
int i, cnt;
|
|
char unit[4 + 1];
|
|
const char *u;
|
|
|
|
/* Bytes 0-1: Measurement mode AC, DC */
|
|
info->is_ac = !strncmp(buf, "AC", 2);
|
|
info->is_dc = !strncmp(buf, "DC", 2);
|
|
|
|
/* Bytes 2-8: See parse_value(). */
|
|
|
|
/* Strip all spaces from bytes 9-12. */
|
|
memset(&unit, 0, 4 + 1);
|
|
for (i = 0, cnt = 0; i < 4; i++) {
|
|
if (buf[9 + i] != ' ')
|
|
unit[cnt++] = buf[9 + i];
|
|
}
|
|
|
|
/* Bytes 9-12: Unit */
|
|
u = (const char *)&unit;
|
|
if (!strcasecmp(u, "A"))
|
|
info->is_ampere = TRUE;
|
|
else if (!strcasecmp(u, "mA"))
|
|
info->is_milli = info->is_ampere = TRUE;
|
|
else if (!strcasecmp(u, "uA"))
|
|
info->is_micro = info->is_ampere = TRUE;
|
|
else if (!strcasecmp(u, "V"))
|
|
info->is_volt = TRUE;
|
|
else if (!strcasecmp(u, "mV"))
|
|
info->is_milli = info->is_volt = TRUE;
|
|
else if (!strcasecmp(u, "Ohm"))
|
|
info->is_ohm = TRUE;
|
|
else if (!strcasecmp(u, "KOhm"))
|
|
info->is_kilo = info->is_ohm = TRUE;
|
|
else if (!strcasecmp(u, "MOhm"))
|
|
info->is_mega = info->is_ohm = TRUE;
|
|
else if (!strcasecmp(u, "pF"))
|
|
info->is_pico = info->is_farad = TRUE;
|
|
else if (!strcasecmp(u, "nF"))
|
|
info->is_nano = info->is_farad = TRUE;
|
|
else if (!strcasecmp(u, "uF"))
|
|
info->is_micro = info->is_farad = TRUE;
|
|
else if (!strcasecmp(u, "KHz"))
|
|
info->is_kilo = info->is_hertz = TRUE;
|
|
else if (!strcasecmp(u, "C"))
|
|
info->is_celsius = TRUE;
|
|
else if (!strcasecmp(u, "DB"))
|
|
info->is_decibel = TRUE;
|
|
else if (!strcasecmp(u, ""))
|
|
info->is_unitless = TRUE;
|
|
|
|
/* Bytes 0-1: Measurement mode, except AC/DC */
|
|
info->is_resistance = !strncmp(buf, "OH", 2) ||
|
|
(!strncmp(buf, " ", 2) && info->is_ohm);
|
|
info->is_capacity = !strncmp(buf, "CA", 2) ||
|
|
(!strncmp(buf, " ", 2) && info->is_farad);
|
|
info->is_temperature = !strncmp(buf, "TE", 2);
|
|
info->is_diode = !strncmp(buf, "DI", 2) ||
|
|
(!strncmp(buf, " ", 2) && info->is_volt && info->is_milli);
|
|
info->is_frequency = !strncmp(buf, "FR", 2) ||
|
|
(!strncmp(buf, " ", 2) && info->is_hertz);
|
|
info->is_gain = !strncmp(buf, "DB", 2);
|
|
info->is_hfe = !strncmp(buf, "HF", 2) ||
|
|
(!strncmp(buf, " ", 2) && !info->is_volt && !info->is_ohm &&
|
|
!info->is_logic && !info->is_farad && !info->is_hertz);
|
|
/*
|
|
* Note:
|
|
* - Protocol doesn't distinguish "resistance" from "beep" mode.
|
|
* - "DB" shows the logarithmic ratio of input voltage to a
|
|
* pre-stored (user-changeable) value in the DMM.
|
|
*/
|
|
|
|
/* Byte 13: Always '\r' (carriage return, 0x0d, 13) */
|
|
}
|
|
|
|
static void handle_flags(struct sr_datafeed_analog *analog, float *floatval,
|
|
const struct metex14_info *info)
|
|
{
|
|
/* Factors */
|
|
if (info->is_pico)
|
|
*floatval /= 1000000000000ULL;
|
|
if (info->is_nano)
|
|
*floatval /= 1000000000;
|
|
if (info->is_micro)
|
|
*floatval /= 1000000;
|
|
if (info->is_milli)
|
|
*floatval /= 1000;
|
|
if (info->is_kilo)
|
|
*floatval *= 1000;
|
|
if (info->is_mega)
|
|
*floatval *= 1000000;
|
|
|
|
/* Measurement modes */
|
|
if (info->is_volt) {
|
|
analog->mq = SR_MQ_VOLTAGE;
|
|
analog->unit = SR_UNIT_VOLT;
|
|
}
|
|
if (info->is_ampere) {
|
|
analog->mq = SR_MQ_CURRENT;
|
|
analog->unit = SR_UNIT_AMPERE;
|
|
}
|
|
if (info->is_ohm) {
|
|
analog->mq = SR_MQ_RESISTANCE;
|
|
analog->unit = SR_UNIT_OHM;
|
|
}
|
|
if (info->is_hertz) {
|
|
analog->mq = SR_MQ_FREQUENCY;
|
|
analog->unit = SR_UNIT_HERTZ;
|
|
}
|
|
if (info->is_farad) {
|
|
analog->mq = SR_MQ_CAPACITANCE;
|
|
analog->unit = SR_UNIT_FARAD;
|
|
}
|
|
if (info->is_celsius) {
|
|
analog->mq = SR_MQ_TEMPERATURE;
|
|
analog->unit = SR_UNIT_CELSIUS;
|
|
}
|
|
if (info->is_diode) {
|
|
analog->mq = SR_MQ_VOLTAGE;
|
|
analog->unit = SR_UNIT_VOLT;
|
|
}
|
|
if (info->is_gain) {
|
|
analog->mq = SR_MQ_GAIN;
|
|
analog->unit = SR_UNIT_DECIBEL_VOLT;
|
|
}
|
|
if (info->is_hfe) {
|
|
analog->mq = SR_MQ_GAIN;
|
|
analog->unit = SR_UNIT_UNITLESS;
|
|
}
|
|
if (info->is_logic) {
|
|
analog->mq = SR_MQ_GAIN;
|
|
analog->unit = SR_UNIT_UNITLESS;
|
|
}
|
|
|
|
/* Measurement related flags */
|
|
if (info->is_ac)
|
|
analog->mqflags |= SR_MQFLAG_AC;
|
|
if (info->is_dc)
|
|
analog->mqflags |= SR_MQFLAG_DC;
|
|
if (info->is_diode)
|
|
analog->mqflags |= SR_MQFLAG_DIODE;
|
|
}
|
|
|
|
static gboolean flags_valid(const struct metex14_info *info)
|
|
{
|
|
int count;
|
|
|
|
/* Does the packet have more than one multiplier? */
|
|
count = 0;
|
|
count += (info->is_pico) ? 1 : 0;
|
|
count += (info->is_nano) ? 1 : 0;
|
|
count += (info->is_micro) ? 1 : 0;
|
|
count += (info->is_milli) ? 1 : 0;
|
|
count += (info->is_kilo) ? 1 : 0;
|
|
count += (info->is_mega) ? 1 : 0;
|
|
if (count > 1) {
|
|
sr_dbg("More than one multiplier detected in packet.");
|
|
return FALSE;
|
|
}
|
|
|
|
/* Does the packet "measure" more than one type of value? */
|
|
count = 0;
|
|
count += (info->is_ac) ? 1 : 0;
|
|
count += (info->is_dc) ? 1 : 0;
|
|
count += (info->is_resistance) ? 1 : 0;
|
|
count += (info->is_capacity) ? 1 : 0;
|
|
count += (info->is_temperature) ? 1 : 0;
|
|
count += (info->is_diode) ? 1 : 0;
|
|
count += (info->is_frequency) ? 1 : 0;
|
|
if (count > 1) {
|
|
sr_dbg("More than one measurement type detected in packet.");
|
|
return FALSE;
|
|
}
|
|
|
|
/* Both AC and DC set? */
|
|
if (info->is_ac && info->is_dc) {
|
|
sr_dbg("Both AC and DC flags detected in packet.");
|
|
return FALSE;
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
#ifdef HAVE_LIBSERIALPORT
|
|
SR_PRIV int sr_metex14_packet_request(struct sr_serial_dev_inst *serial)
|
|
{
|
|
const uint8_t wbuf = 'D';
|
|
|
|
sr_spew("Requesting DMM packet.");
|
|
|
|
return (serial_write(serial, &wbuf, 1) == 1) ? SR_OK : SR_ERR;
|
|
}
|
|
#endif
|
|
|
|
SR_PRIV gboolean sr_metex14_packet_valid(const uint8_t *buf)
|
|
{
|
|
struct metex14_info info;
|
|
|
|
memset(&info, 0x00, sizeof(struct metex14_info));
|
|
parse_flags((const char *)buf, &info);
|
|
|
|
if (!flags_valid(&info))
|
|
return FALSE;
|
|
|
|
if (buf[13] != '\r')
|
|
return FALSE;
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/**
|
|
* Parse a protocol packet.
|
|
*
|
|
* @param buf Buffer containing the protocol packet. Must not be NULL.
|
|
* @param floatval Pointer to a float variable. That variable will be modified
|
|
* in-place depending on the protocol packet. Must not be NULL.
|
|
* @param analog Pointer to a struct sr_datafeed_analog. The struct will be
|
|
* filled with data according to the protocol packet.
|
|
* Must not be NULL.
|
|
* @param info Pointer to a struct metex14_info. The struct will be filled
|
|
* with data according to the protocol packet. Must not be NULL.
|
|
*
|
|
* @return SR_OK upon success, SR_ERR upon failure. Upon errors, the
|
|
* 'analog' variable contents are undefined and should not be used.
|
|
*/
|
|
SR_PRIV int sr_metex14_parse(const uint8_t *buf, float *floatval,
|
|
struct sr_datafeed_analog *analog, void *info)
|
|
{
|
|
int ret;
|
|
struct metex14_info *info_local;
|
|
|
|
info_local = (struct metex14_info *)info;
|
|
|
|
/* Don't print byte 13. That one contains the carriage return. */
|
|
sr_dbg("DMM packet: \"%.13s\"", buf);
|
|
|
|
memset(info_local, 0x00, sizeof(struct metex14_info));
|
|
|
|
if ((ret = parse_value(buf, info_local, floatval)) != SR_OK) {
|
|
sr_dbg("Error parsing value: %d.", ret);
|
|
return ret;
|
|
}
|
|
|
|
parse_flags((const char *)buf, info_local);
|
|
handle_flags(analog, floatval, info_local);
|
|
|
|
return SR_OK;
|
|
}
|