libsigrok/NEWS

282 lines
11 KiB
Plaintext

0.2.2 (2013-11-04)
------------------
Note: This release does NOT change the libsigrok API. While new config keys,
config info types, and unit codes have been added (additional enum
entries / numbers), no existing interfaces were added/changed/removed.
Frontends should continue to work fine without recompiling or relinking.
* New supported hardware:
- Logic analyzers:
- Saleae Logic16
- Thermometers:
- Center 309
- UNI-T UT325
- Voltcraft K204
- Multimeters:
- ISOTECH IDM103N
- Metex M-4650CR
- Norma DM950
- Voltcraft M-4650CR
- Energy meters:
- EDF Teleinfo
* New config keys:
- SR_CONF_VOLTAGE_THRESHOLD
- SR_CONF_EXTERNAL_CLOCK
- SR_CONF_SWAP
- SR_CONF_ENERGYMETER
* New config info types:
- SR_T_DOUBLE_RANGE
* New units:
- SR_UNIT_REVOLUTIONS_PER_MINUTE
- SR_UNIT_VOLT_AMPERE
- SR_UNIT_WATT
- SR_UNIT_WATT_HOUR
* New input modules:
- csv (comma-separated values)
* Bump required libzip version to >= 0.10.
* uni-t-dmm: This driver now requires the specification of the USB VID/PID
of the cable that is used. Example for sigrok-cli:
- Old: sigrok-cli --driver voltcraft-vc820 ...
- New: sigrok-cli --driver voltcraft-vc820:conn=1a86.e008 ...
* openbench-logic-sniffer:
- Initial test pattern support (SR_CONF_PATTERN_MODE).
- Initial external clock support (SR_CONF_EXTERNAL_CLOCK).
- Initial channel swap support (SR_CONF_SWAP).
- Various minor fixes and improvements.
* When a frontend adds a device instance to a running session, start
acquisition on it. This helps with the collectd use-case where devices
can be removed and added dynamically while a session is running.
* rigol-ds1xx2: Support newer Linux kernels with USBTMC in /sys/class/usbmisc.
* rigol-ds1xx2: Also detect the Rigol DS1152E/DS1152D.
* agilent-dmm: Fix a segfault happening in certain cases.
* output/analog: Support all currently known MQFLAGs.
* Fix a minor compile issue due to an incorrect #include.
* Fix two compile issues on FreeBSD (bug #185).
* es519xx: New generic parser for various Cyrustek DMM ICs.
* es51922/fs9721/fs9922/metex14: Use diode MQFLAG (bug #141).
* voltcraft-vc830: Fix diode mode handling (bug #142).
* Add the missing HACKING file to the tarball.
* README.devices: Updates/notes for newly added devices.
0.2.1 (2013-08-07)
------------------
Note: This release does NOT change the libsigrok API. While new config keys,
config info types, and error codes have been added (additional enum
entries / numbers), no existing interfaces were added/changed/removed.
Frontends should continue to work fine without recompiling or relinking.
* New supported hardware:
- Logic analyzers:
- IKALOGIC Scanalogic-2
- IKALOGIC ScanaPLUS
- Sound level meters:
- CEM DT-8852
- Kecheng KC-330B
- Multimeters:
- UNI-T UT60A
- UNI-T UT60E
- Voltcraft M-3650D
- Voltcraft VC-830
* Drop the Tecpel DMM-8060 (doesn't have PC connectivity).
* New config keys:
- SR_CONF_SPL_WEIGHT_FREQ
- SR_CONF_SPL_WEIGHT_TIME
- SR_CONF_SPL_MEASUREMENT_RANGE
- SR_CONF_HOLD_MIN
- SR_CONF_HOLD_MAX
- SR_CONF_POWER_OFF
- SR_CONF_DATA_SOURCE
* New config info types:
- SR_T_UINT64_RANGE
* New error codes:
- SR_ERR_TIMEOUT
* Always link against libm, the math library (bug #115).
* Fix a bug in sr_si_string_u64() at al (bug #73).
* output/csv: Fix incorrect probe order.
* alsa: Fix a double-free issue (bug #129).
* zeroplus-logic-cube: Fix a bug in the driver cleanup code.
* ikalogic-scanalogic2: Use GET_REPORT (bug #130).
* uni-t-dmm: Fix a bug breaking the UNI-T UT61E (bug #136).
* Various internal consistency fixes and code cleanups.
* Improved Doxygen documentation.
* Fixed various memory leaks.
0.2.0 (2013-05-04)
------------------
Note: This release DOES change the libsigrok API. That means it is NOT
backwards-compatible and frontends will need updates.
* Support for analog sources (oscilloscopes, DMMs, data loggers) was added.
* New supported hardware:
- Logic analyzers:
- CWAV USBee DX
- ZEROPLUS LAP-16128U
- Oscilloscopes:
- Hantek DSO-2090 (USB scope)
- Rigol DS1052D
- Rigol DS1052E
- Rigol DS1102D
- Rigol DS1102E
- Multimeters:
- Agilent U1231A
- Agilent U1232A
- Agilent U1233A
- Brymen BM857
- Digitek DT4000ZC
- Fluke 187
- Fluke 189
- Fluke 287
- Fluke 289
- Fluke ScopeMeter 199B
- MASTECH MAS345
- Metex ME-31
- Metex M-3640D
- PCE PCE-DM32
- PeakTech 3410
- PeakTech 4370
- RadioShack 22-168
- RadioShack 22-805
- RadioShack 22-812
- Tecpel DMM-8060
- Tecpel DMM-8061
- TekPower TP4000ZC
- UNI-T UT61D
- UNI-T UT61E
- V&A VA18B
- Victor 70C
- Victor 86C
- Voltcraft VC-820
- Voltcraft VC-840
- Sound level meters:
- Colead SL-5868P
- Tondaj SL-814
- Temperature/humidity/CO loggers:
- Lascar EL-USB and EL-USB CO series (various models)
- MIC 98581
- MIC 98583
* The limitation of max. 64 digital probes has been removed in many places.
* Added generic DMM protocol parsers usable for various DMMs, over various
cables and/or transports (e.g. same protocol over serial or USB/HID):
- Cyrustek ES51922 binary protocol.
- Fortune Semiconductor FS9721_LP3/FS9721B binary protocol.
- Fortune Semiconductor FS9922-DMM3/DMM4 binary protocol.
- Metex 14-byte ASCII protocol.
- RadioShack 22-812 binary protocol.
* zeroplus-logic-cube driver:
- Fix acquisition at some specific samplerates. Only report valid ones.
- Default to a samplerate of 1MHz.
- Fix trigger code.
- Add pre-trigger (capture ratio) setting.
- Add support for the ZEROPLUS LAP-16128U.
* fx2lafw driver:
- Add support for the CWAV USBee DX. This requires the latest version of
the fx2lafw firmware files.
- Add support for wide sampling (i.e. 16 probes instead of just 8).
- Fix multi-stage (software) triggers.
- Fix various memory leaks, firmware upload timeout bugs, and other issues.
- Various performance and memory usage improvements in the driver.
* chronovu-la8 driver:
- Add support for newer LA8 versions with USB VID/PID 0403:8867.
* demo driver:
- Various bugfixes when setting time/sample limits.
* openbench-logic-sniffer driver:
- Don't try to scan all available serial ports for OLS devices. Instead,
the serial port to use now has to be specified by the user.
- Allow disabling RLE.
* udev rules file: Add many new entries for additional devices.
* New output formats:
- analog: Prints analog values and their unit (e.g. from scopes or DMMs).
* New input formats:
- vcd: Value Change Dump format
- wav: Waveform audio file format (for analog data)
* 'binary' input format: Add support for a 'samplerate' option.
* API related changes:
- There is generated Doxygen API documentation now.
- The header that frontends should include is: <libsigrok/libsigrok.h>.
There are other headers which are installed, but those are not meant to
be included directly by the frontends.
- There were numerous API changes, additions and removals, too many to list
here. Please check the source code or Doxygen API documentation for the
current set of API functions.
* Serial port code:
- Various improvements and fixes related to multiple parameters such as
directions, baudrate, flow control, and others.
- Add support for more baudrates (e.g. very low ones such as 600/1200)
that are used in some devices.
- Add support for setting DTR/RTS.
* gnuplot files: Add sample files for CWAV USBee DX (for 8/16 bit sampling).
* Documentation updates:
- Add a README.devices file which contains various notes for users of
libsigrok about device- and/or driver-specific issues.
- Update README, HACKING, and other documents.
- Updated build dependencies list.
- The following libs are needed in more recent versions now:
- glib (required): Now must be >= 2.32.0.
- libusb-1.0 (optional): Now must be >= 1.0.9.
- The following new libs were added as (optional) dependencies:
- libasound / alsa-lib (optional): >= 1.0
- check (optional, only needed for unit tests): >= 0.9.4
* Portability:
- Various compile fixes for Windows, FreeBSD/NetBSD/OpenBSD, and Mac OS X.
- Simplify/allow/fix cross-compilation of libsigrok.
- Various bugfixes for 32bit systems.
- Various endianness fixes.
* configure:
- Add a --disable-all-drivers option. This can be overridden by
additional --enable-<drivername> options to selectively enable only some.
- Improve autodetection of libraries, and only enable drivers for which
all required libraries were found.
* Add a test suite for libsigrok with a few unit tests (the list will grow).
0.1.1 (2012-05-30)
------------------
Note: This release does NOT change the libsigrok API.
* The 'saleae-logic' driver (which depends on the Saleae firmware), has
been replaced with the new 'fx2lafw' driver, which uses an open-source
firmware for Cypress FX2 chips which is also named 'fx2lafw'.
Details: http://sigrok.org/wiki/Fx2lafw
This new driver (+ firmware) currently supports the following devices:
- ARMFLY AX-Pro
- Braintechnology USB-LPS
- EE Electronics ESLA100
- EE Electronics ESLA201A
- Robomotic MiniLogic
- Robomotic BugLogic 3
- Saleae Logic
- USBee AX
- USBee SX
- All Cypress FX2 eval boards with stock Cypress VID/PID, including:
- Lcsoft Mini Board
- Braintechnology USB Interface V2.x
Only acquisition with 8 probes is supported so far. Support for 16 probes
and support for analog signal acquisition (on devices which have these
capabilities) will be added later.
* ASIX SIGMA driver:
- Add support for the ASIX SIGMA2. This requires the latest version of
the SIGMA/SIGMA2 firmware files.
Details: http://sigrok.org/wiki/Firmware
- Various bugfixes.
* ZEROPLUS Logic Cube LAP-C (16032): Fix a segfault.
* udev file: Add entries for Robomotic BugLogic 3, Velleman PCSU1000,
Ideofy LA-08, ARMFLY AX-Pro, and Braintechnology USB Interface V2.x.
* The zlib dependency has been removed (no longer needed).
* Fix compiling with "Homebrew" (Mac OS X).
* libsigrok now expects firmware files in $prefix/share/sigrok-firmware by
default (was $prefix/share/libsigrok/firmware before).
* Fix a Makefile.am bug which caused the generated ChangeLog files being
accidentally deleted upon 'make distclean'.
* ChronoVu LA8 input file format: Improve autodetection of the file format.
We now only accept files of the size 8388613 bytes (all LA8 files have
exactly this amount of bytes).
0.1.0 (2012-04-17)
------------------
* Initial release.