libsigrok/hardware/asix-sigma/asix-sigma.c

1427 lines
33 KiB
C

/*
* This file is part of the sigrok project.
*
* Copyright (C) 2010-2012 Håvard Espeland <gus@ping.uio.no>,
* Copyright (C) 2010 Martin Stensgård <mastensg@ping.uio.no>
* Copyright (C) 2010 Carl Henrik Lunde <chlunde@ping.uio.no>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* ASIX SIGMA/SIGMA2 logic analyzer driver
*/
#include <glib.h>
#include <glib/gstdio.h>
#include <ftdi.h>
#include <string.h>
#include "libsigrok.h"
#include "libsigrok-internal.h"
#include "asix-sigma.h"
#define USB_VENDOR 0xa600
#define USB_PRODUCT 0xa000
#define USB_DESCRIPTION "ASIX SIGMA"
#define USB_VENDOR_NAME "ASIX"
#define USB_MODEL_NAME "SIGMA"
#define USB_MODEL_VERSION ""
#define TRIGGER_TYPE "rf10"
#define NUM_PROBES 16
SR_PRIV struct sr_dev_driver asix_sigma_driver_info;
static struct sr_dev_driver *di = &asix_sigma_driver_info;
static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data);
static const uint64_t samplerates[] = {
SR_KHZ(200),
SR_KHZ(250),
SR_KHZ(500),
SR_MHZ(1),
SR_MHZ(5),
SR_MHZ(10),
SR_MHZ(25),
SR_MHZ(50),
SR_MHZ(100),
SR_MHZ(200),
};
/*
* Probe numbers seem to go from 1-16, according to this image:
* http://tools.asix.net/img/sigma_sigmacab_pins_720.jpg
* (the cable has two additional GND pins, and a TI and TO pin)
*/
static const char *probe_names[NUM_PROBES + 1] = {
"1", "2", "3", "4", "5", "6", "7", "8",
"9", "10", "11", "12", "13", "14", "15", "16",
NULL,
};
static const int32_t hwcaps[] = {
SR_CONF_LOGIC_ANALYZER,
SR_CONF_SAMPLERATE,
SR_CONF_CAPTURE_RATIO,
SR_CONF_LIMIT_MSEC,
};
/* Force the FPGA to reboot. */
static uint8_t suicide[] = {
0x84, 0x84, 0x88, 0x84, 0x88, 0x84, 0x88, 0x84,
};
/* Prepare to upload firmware (FPGA specific). */
static uint8_t init[] = {
0x03, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
};
/* Initialize the logic analyzer mode. */
static uint8_t logic_mode_start[] = {
0x00, 0x40, 0x0f, 0x25, 0x35, 0x40,
0x2a, 0x3a, 0x40, 0x03, 0x20, 0x38,
};
static const char *firmware_files[] = {
"asix-sigma-50.fw", /* 50 MHz, supports 8 bit fractions */
"asix-sigma-100.fw", /* 100 MHz */
"asix-sigma-200.fw", /* 200 MHz */
"asix-sigma-50sync.fw", /* Synchronous clock from pin */
"asix-sigma-phasor.fw", /* Frequency counter */
};
static int sigma_read(void *buf, size_t size, struct dev_context *devc)
{
int ret;
ret = ftdi_read_data(&devc->ftdic, (unsigned char *)buf, size);
if (ret < 0) {
sr_err("ftdi_read_data failed: %s",
ftdi_get_error_string(&devc->ftdic));
}
return ret;
}
static int sigma_write(void *buf, size_t size, struct dev_context *devc)
{
int ret;
ret = ftdi_write_data(&devc->ftdic, (unsigned char *)buf, size);
if (ret < 0) {
sr_err("ftdi_write_data failed: %s",
ftdi_get_error_string(&devc->ftdic));
} else if ((size_t) ret != size) {
sr_err("ftdi_write_data did not complete write.");
}
return ret;
}
static int sigma_write_register(uint8_t reg, uint8_t *data, size_t len,
struct dev_context *devc)
{
size_t i;
uint8_t buf[len + 2];
int idx = 0;
buf[idx++] = REG_ADDR_LOW | (reg & 0xf);
buf[idx++] = REG_ADDR_HIGH | (reg >> 4);
for (i = 0; i < len; ++i) {
buf[idx++] = REG_DATA_LOW | (data[i] & 0xf);
buf[idx++] = REG_DATA_HIGH_WRITE | (data[i] >> 4);
}
return sigma_write(buf, idx, devc);
}
static int sigma_set_register(uint8_t reg, uint8_t value, struct dev_context *devc)
{
return sigma_write_register(reg, &value, 1, devc);
}
static int sigma_read_register(uint8_t reg, uint8_t *data, size_t len,
struct dev_context *devc)
{
uint8_t buf[3];
buf[0] = REG_ADDR_LOW | (reg & 0xf);
buf[1] = REG_ADDR_HIGH | (reg >> 4);
buf[2] = REG_READ_ADDR;
sigma_write(buf, sizeof(buf), devc);
return sigma_read(data, len, devc);
}
static uint8_t sigma_get_register(uint8_t reg, struct dev_context *devc)
{
uint8_t value;
if (1 != sigma_read_register(reg, &value, 1, devc)) {
sr_err("sigma_get_register: 1 byte expected");
return 0;
}
return value;
}
static int sigma_read_pos(uint32_t *stoppos, uint32_t *triggerpos,
struct dev_context *devc)
{
uint8_t buf[] = {
REG_ADDR_LOW | READ_TRIGGER_POS_LOW,
REG_READ_ADDR | NEXT_REG,
REG_READ_ADDR | NEXT_REG,
REG_READ_ADDR | NEXT_REG,
REG_READ_ADDR | NEXT_REG,
REG_READ_ADDR | NEXT_REG,
REG_READ_ADDR | NEXT_REG,
};
uint8_t result[6];
sigma_write(buf, sizeof(buf), devc);
sigma_read(result, sizeof(result), devc);
*triggerpos = result[0] | (result[1] << 8) | (result[2] << 16);
*stoppos = result[3] | (result[4] << 8) | (result[5] << 16);
/* Not really sure why this must be done, but according to spec. */
if ((--*stoppos & 0x1ff) == 0x1ff)
stoppos -= 64;
if ((*--triggerpos & 0x1ff) == 0x1ff)
triggerpos -= 64;
return 1;
}
static int sigma_read_dram(uint16_t startchunk, size_t numchunks,
uint8_t *data, struct dev_context *devc)
{
size_t i;
uint8_t buf[4096];
int idx = 0;
/* Send the startchunk. Index start with 1. */
buf[0] = startchunk >> 8;
buf[1] = startchunk & 0xff;
sigma_write_register(WRITE_MEMROW, buf, 2, devc);
/* Read the DRAM. */
buf[idx++] = REG_DRAM_BLOCK;
buf[idx++] = REG_DRAM_WAIT_ACK;
for (i = 0; i < numchunks; ++i) {
/* Alternate bit to copy from DRAM to cache. */
if (i != (numchunks - 1))
buf[idx++] = REG_DRAM_BLOCK | (((i + 1) % 2) << 4);
buf[idx++] = REG_DRAM_BLOCK_DATA | ((i % 2) << 4);
if (i != (numchunks - 1))
buf[idx++] = REG_DRAM_WAIT_ACK;
}
sigma_write(buf, idx, devc);
return sigma_read(data, numchunks * CHUNK_SIZE, devc);
}
/* Upload trigger look-up tables to Sigma. */
static int sigma_write_trigger_lut(struct triggerlut *lut, struct dev_context *devc)
{
int i;
uint8_t tmp[2];
uint16_t bit;
/* Transpose the table and send to Sigma. */
for (i = 0; i < 16; ++i) {
bit = 1 << i;
tmp[0] = tmp[1] = 0;
if (lut->m2d[0] & bit)
tmp[0] |= 0x01;
if (lut->m2d[1] & bit)
tmp[0] |= 0x02;
if (lut->m2d[2] & bit)
tmp[0] |= 0x04;
if (lut->m2d[3] & bit)
tmp[0] |= 0x08;
if (lut->m3 & bit)
tmp[0] |= 0x10;
if (lut->m3s & bit)
tmp[0] |= 0x20;
if (lut->m4 & bit)
tmp[0] |= 0x40;
if (lut->m0d[0] & bit)
tmp[1] |= 0x01;
if (lut->m0d[1] & bit)
tmp[1] |= 0x02;
if (lut->m0d[2] & bit)
tmp[1] |= 0x04;
if (lut->m0d[3] & bit)
tmp[1] |= 0x08;
if (lut->m1d[0] & bit)
tmp[1] |= 0x10;
if (lut->m1d[1] & bit)
tmp[1] |= 0x20;
if (lut->m1d[2] & bit)
tmp[1] |= 0x40;
if (lut->m1d[3] & bit)
tmp[1] |= 0x80;
sigma_write_register(WRITE_TRIGGER_SELECT0, tmp, sizeof(tmp),
devc);
sigma_set_register(WRITE_TRIGGER_SELECT1, 0x30 | i, devc);
}
/* Send the parameters */
sigma_write_register(WRITE_TRIGGER_SELECT0, (uint8_t *) &lut->params,
sizeof(lut->params), devc);
return SR_OK;
}
/* Generate the bitbang stream for programming the FPGA. */
static int bin2bitbang(const char *filename,
unsigned char **buf, size_t *buf_size)
{
FILE *f;
unsigned long file_size;
unsigned long offset = 0;
unsigned char *p;
uint8_t *firmware;
unsigned long fwsize = 0;
const int buffer_size = 65536;
size_t i;
int c, bit, v;
uint32_t imm = 0x3f6df2ab;
f = g_fopen(filename, "rb");
if (!f) {
sr_err("g_fopen(\"%s\", \"rb\")", filename);
return SR_ERR;
}
if (-1 == fseek(f, 0, SEEK_END)) {
sr_err("fseek on %s failed", filename);
fclose(f);
return SR_ERR;
}
file_size = ftell(f);
fseek(f, 0, SEEK_SET);
if (!(firmware = g_try_malloc(buffer_size))) {
sr_err("%s: firmware malloc failed", __func__);
fclose(f);
return SR_ERR_MALLOC;
}
while ((c = getc(f)) != EOF) {
imm = (imm + 0xa853753) % 177 + (imm * 0x8034052);
firmware[fwsize++] = c ^ imm;
}
fclose(f);
if(fwsize != file_size) {
sr_err("%s: Error reading firmware", filename);
fclose(f);
g_free(firmware);
return SR_ERR;
}
*buf_size = fwsize * 2 * 8;
*buf = p = (unsigned char *)g_try_malloc(*buf_size);
if (!p) {
sr_err("%s: buf/p malloc failed", __func__);
g_free(firmware);
return SR_ERR_MALLOC;
}
for (i = 0; i < fwsize; ++i) {
for (bit = 7; bit >= 0; --bit) {
v = firmware[i] & 1 << bit ? 0x40 : 0x00;
p[offset++] = v | 0x01;
p[offset++] = v;
}
}
g_free(firmware);
if (offset != *buf_size) {
g_free(*buf);
sr_err("Error reading firmware %s "
"offset=%ld, file_size=%ld, buf_size=%zd.",
filename, offset, file_size, *buf_size);
return SR_ERR;
}
return SR_OK;
}
static int clear_instances(void)
{
GSList *l;
struct sr_dev_inst *sdi;
struct drv_context *drvc;
struct dev_context *devc;
drvc = di->priv;
/* Properly close all devices. */
for (l = drvc->instances; l; l = l->next) {
if (!(sdi = l->data)) {
/* Log error, but continue cleaning up the rest. */
sr_err("%s: sdi was NULL, continuing", __func__);
continue;
}
if (sdi->priv) {
devc = sdi->priv;
ftdi_deinit(&devc->ftdic);
}
sr_dev_inst_free(sdi);
}
g_slist_free(drvc->instances);
drvc->instances = NULL;
return SR_OK;
}
static int hw_init(struct sr_context *sr_ctx)
{
return std_hw_init(sr_ctx, di, DRIVER_LOG_DOMAIN);
}
static GSList *hw_scan(GSList *options)
{
struct sr_dev_inst *sdi;
struct sr_probe *probe;
struct drv_context *drvc;
struct dev_context *devc;
GSList *devices;
struct ftdi_device_list *devlist;
char serial_txt[10];
uint32_t serial;
int ret, i;
(void)options;
drvc = di->priv;
devices = NULL;
clear_instances();
if (!(devc = g_try_malloc(sizeof(struct dev_context)))) {
sr_err("%s: devc malloc failed", __func__);
return NULL;
}
ftdi_init(&devc->ftdic);
/* Look for SIGMAs. */
if ((ret = ftdi_usb_find_all(&devc->ftdic, &devlist,
USB_VENDOR, USB_PRODUCT)) <= 0) {
if (ret < 0)
sr_err("ftdi_usb_find_all(): %d", ret);
goto free;
}
/* Make sure it's a version 1 or 2 SIGMA. */
ftdi_usb_get_strings(&devc->ftdic, devlist->dev, NULL, 0, NULL, 0,
serial_txt, sizeof(serial_txt));
sscanf(serial_txt, "%x", &serial);
if (serial < 0xa6010000 || serial > 0xa602ffff) {
sr_err("Only SIGMA and SIGMA2 are supported "
"in this version of libsigrok.");
goto free;
}
sr_info("Found ASIX SIGMA - Serial: %s", serial_txt);
devc->cur_samplerate = 0;
devc->period_ps = 0;
devc->limit_msec = 0;
devc->cur_firmware = -1;
devc->num_probes = 0;
devc->samples_per_event = 0;
devc->capture_ratio = 50;
devc->use_triggers = 0;
/* Register SIGMA device. */
if (!(sdi = sr_dev_inst_new(0, SR_ST_INITIALIZING, USB_VENDOR_NAME,
USB_MODEL_NAME, USB_MODEL_VERSION))) {
sr_err("%s: sdi was NULL", __func__);
goto free;
}
sdi->driver = di;
for (i = 0; probe_names[i]; i++) {
if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
probe_names[i])))
return NULL;
sdi->probes = g_slist_append(sdi->probes, probe);
}
devices = g_slist_append(devices, sdi);
drvc->instances = g_slist_append(drvc->instances, sdi);
sdi->priv = devc;
/* We will open the device again when we need it. */
ftdi_list_free(&devlist);
return devices;
free:
ftdi_deinit(&devc->ftdic);
g_free(devc);
return NULL;
}
static GSList *hw_dev_list(void)
{
return ((struct drv_context *)(di->priv))->instances;
}
static int upload_firmware(int firmware_idx, struct dev_context *devc)
{
int ret;
unsigned char *buf;
unsigned char pins;
size_t buf_size;
unsigned char result[32];
char firmware_path[128];
/* Make sure it's an ASIX SIGMA. */
if ((ret = ftdi_usb_open_desc(&devc->ftdic,
USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) {
sr_err("ftdi_usb_open failed: %s",
ftdi_get_error_string(&devc->ftdic));
return 0;
}
if ((ret = ftdi_set_bitmode(&devc->ftdic, 0xdf, BITMODE_BITBANG)) < 0) {
sr_err("ftdi_set_bitmode failed: %s",
ftdi_get_error_string(&devc->ftdic));
return 0;
}
/* Four times the speed of sigmalogan - Works well. */
if ((ret = ftdi_set_baudrate(&devc->ftdic, 750000)) < 0) {
sr_err("ftdi_set_baudrate failed: %s",
ftdi_get_error_string(&devc->ftdic));
return 0;
}
/* Force the FPGA to reboot. */
sigma_write(suicide, sizeof(suicide), devc);
sigma_write(suicide, sizeof(suicide), devc);
sigma_write(suicide, sizeof(suicide), devc);
sigma_write(suicide, sizeof(suicide), devc);
/* Prepare to upload firmware (FPGA specific). */
sigma_write(init, sizeof(init), devc);
ftdi_usb_purge_buffers(&devc->ftdic);
/* Wait until the FPGA asserts INIT_B. */
while (1) {
ret = sigma_read(result, 1, devc);
if (result[0] & 0x20)
break;
}
/* Prepare firmware. */
snprintf(firmware_path, sizeof(firmware_path), "%s/%s", FIRMWARE_DIR,
firmware_files[firmware_idx]);
if ((ret = bin2bitbang(firmware_path, &buf, &buf_size)) != SR_OK) {
sr_err("An error occured while reading the firmware: %s",
firmware_path);
return ret;
}
/* Upload firmare. */
sr_info("Uploading firmware file '%s'.", firmware_files[firmware_idx]);
sigma_write(buf, buf_size, devc);
g_free(buf);
if ((ret = ftdi_set_bitmode(&devc->ftdic, 0x00, BITMODE_RESET)) < 0) {
sr_err("ftdi_set_bitmode failed: %s",
ftdi_get_error_string(&devc->ftdic));
return SR_ERR;
}
ftdi_usb_purge_buffers(&devc->ftdic);
/* Discard garbage. */
while (1 == sigma_read(&pins, 1, devc))
;
/* Initialize the logic analyzer mode. */
sigma_write(logic_mode_start, sizeof(logic_mode_start), devc);
/* Expect a 3 byte reply. */
ret = sigma_read(result, 3, devc);
if (ret != 3 ||
result[0] != 0xa6 || result[1] != 0x55 || result[2] != 0xaa) {
sr_err("Configuration failed. Invalid reply received.");
return SR_ERR;
}
devc->cur_firmware = firmware_idx;
sr_info("Firmware uploaded.");
return SR_OK;
}
static int hw_dev_open(struct sr_dev_inst *sdi)
{
struct dev_context *devc;
int ret;
devc = sdi->priv;
/* Make sure it's an ASIX SIGMA. */
if ((ret = ftdi_usb_open_desc(&devc->ftdic,
USB_VENDOR, USB_PRODUCT, USB_DESCRIPTION, NULL)) < 0) {
sr_err("ftdi_usb_open failed: %s",
ftdi_get_error_string(&devc->ftdic));
return 0;
}
sdi->status = SR_ST_ACTIVE;
return SR_OK;
}
static int set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate)
{
struct dev_context *devc;
unsigned int i;
int ret;
devc = sdi->priv;
ret = SR_OK;
for (i = 0; i < ARRAY_SIZE(samplerates); i++) {
if (samplerates[i] == samplerate)
break;
}
if (samplerates[i] == 0)
return SR_ERR_SAMPLERATE;
if (samplerate <= SR_MHZ(50)) {
ret = upload_firmware(0, devc);
devc->num_probes = 16;
}
if (samplerate == SR_MHZ(100)) {
ret = upload_firmware(1, devc);
devc->num_probes = 8;
}
else if (samplerate == SR_MHZ(200)) {
ret = upload_firmware(2, devc);
devc->num_probes = 4;
}
devc->cur_samplerate = samplerate;
devc->period_ps = 1000000000000ULL / samplerate;
devc->samples_per_event = 16 / devc->num_probes;
devc->state.state = SIGMA_IDLE;
return ret;
}
/*
* In 100 and 200 MHz mode, only a single pin rising/falling can be
* set as trigger. In other modes, two rising/falling triggers can be set,
* in addition to value/mask trigger for any number of probes.
*
* The Sigma supports complex triggers using boolean expressions, but this
* has not been implemented yet.
*/
static int configure_probes(const struct sr_dev_inst *sdi)
{
struct dev_context *devc = sdi->priv;
const struct sr_probe *probe;
const GSList *l;
int trigger_set = 0;
int probebit;
memset(&devc->trigger, 0, sizeof(struct sigma_trigger));
for (l = sdi->probes; l; l = l->next) {
probe = (struct sr_probe *)l->data;
probebit = 1 << (probe->index);
if (!probe->enabled || !probe->trigger)
continue;
if (devc->cur_samplerate >= SR_MHZ(100)) {
/* Fast trigger support. */
if (trigger_set) {
sr_err("Only a single pin trigger in 100 and "
"200MHz mode is supported.");
return SR_ERR;
}
if (probe->trigger[0] == 'f')
devc->trigger.fallingmask |= probebit;
else if (probe->trigger[0] == 'r')
devc->trigger.risingmask |= probebit;
else {
sr_err("Only rising/falling trigger in 100 "
"and 200MHz mode is supported.");
return SR_ERR;
}
++trigger_set;
} else {
/* Simple trigger support (event). */
if (probe->trigger[0] == '1') {
devc->trigger.simplevalue |= probebit;
devc->trigger.simplemask |= probebit;
}
else if (probe->trigger[0] == '0') {
devc->trigger.simplevalue &= ~probebit;
devc->trigger.simplemask |= probebit;
}
else if (probe->trigger[0] == 'f') {
devc->trigger.fallingmask |= probebit;
++trigger_set;
}
else if (probe->trigger[0] == 'r') {
devc->trigger.risingmask |= probebit;
++trigger_set;
}
/*
* Actually, Sigma supports 2 rising/falling triggers,
* but they are ORed and the current trigger syntax
* does not permit ORed triggers.
*/
if (trigger_set > 1) {
sr_err("Only 1 rising/falling trigger "
"is supported.");
return SR_ERR;
}
}
if (trigger_set)
devc->use_triggers = 1;
}
return SR_OK;
}
static int hw_dev_close(struct sr_dev_inst *sdi)
{
struct dev_context *devc;
devc = sdi->priv;
/* TODO */
if (sdi->status == SR_ST_ACTIVE)
ftdi_usb_close(&devc->ftdic);
sdi->status = SR_ST_INACTIVE;
return SR_OK;
}
static int hw_cleanup(void)
{
if (!di->priv)
return SR_OK;
clear_instances();
return SR_OK;
}
static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
switch (id) {
case SR_CONF_SAMPLERATE:
if (sdi) {
devc = sdi->priv;
*data = g_variant_new_uint64(devc->cur_samplerate);
} else
return SR_ERR;
break;
default:
return SR_ERR_NA;
}
return SR_OK;
}
static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
int ret;
devc = sdi->priv;
if (id == SR_CONF_SAMPLERATE) {
ret = set_samplerate(sdi, g_variant_get_uint64(data));
} else if (id == SR_CONF_LIMIT_MSEC) {
devc->limit_msec = g_variant_get_uint64(data);
if (devc->limit_msec > 0)
ret = SR_OK;
else
ret = SR_ERR;
} else if (id == SR_CONF_CAPTURE_RATIO) {
devc->capture_ratio = g_variant_get_uint64(data);
if (devc->capture_ratio < 0 || devc->capture_ratio > 100)
ret = SR_ERR;
else
ret = SR_OK;
} else {
ret = SR_ERR_NA;
}
return ret;
}
static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
{
GVariant *gvar;
GVariantBuilder gvb;
(void)sdi;
switch (key) {
case SR_CONF_DEVICE_OPTIONS:
*data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
break;
case SR_CONF_SAMPLERATE:
g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
ARRAY_SIZE(samplerates), sizeof(uint64_t));
g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
*data = g_variant_builder_end(&gvb);
break;
case SR_CONF_TRIGGER_TYPE:
*data = g_variant_new_string(TRIGGER_TYPE);
break;
default:
return SR_ERR_NA;
}
return SR_OK;
}
/* Software trigger to determine exact trigger position. */
static int get_trigger_offset(uint16_t *samples, uint16_t last_sample,
struct sigma_trigger *t)
{
int i;
for (i = 0; i < 8; ++i) {
if (i > 0)
last_sample = samples[i-1];
/* Simple triggers. */
if ((samples[i] & t->simplemask) != t->simplevalue)
continue;
/* Rising edge. */
if ((last_sample & t->risingmask) != 0 || (samples[i] &
t->risingmask) != t->risingmask)
continue;
/* Falling edge. */
if ((last_sample & t->fallingmask) != t->fallingmask ||
(samples[i] & t->fallingmask) != 0)
continue;
break;
}
/* If we did not match, return original trigger pos. */
return i & 0x7;
}
/*
* Decode chunk of 1024 bytes, 64 clusters, 7 events per cluster.
* Each event is 20ns apart, and can contain multiple samples.
*
* For 200 MHz, events contain 4 samples for each channel, spread 5 ns apart.
* For 100 MHz, events contain 2 samples for each channel, spread 10 ns apart.
* For 50 MHz and below, events contain one sample for each channel,
* spread 20 ns apart.
*/
static int decode_chunk_ts(uint8_t *buf, uint16_t *lastts,
uint16_t *lastsample, int triggerpos,
uint16_t limit_chunk, void *cb_data)
{
struct sr_dev_inst *sdi = cb_data;
struct dev_context *devc = sdi->priv;
uint16_t tsdiff, ts;
uint16_t samples[65536 * devc->samples_per_event];
struct sr_datafeed_packet packet;
struct sr_datafeed_logic logic;
int i, j, k, l, numpad, tosend;
size_t n = 0, sent = 0;
int clustersize = EVENTS_PER_CLUSTER * devc->samples_per_event;
uint16_t *event;
uint16_t cur_sample;
int triggerts = -1;
/* Check if trigger is in this chunk. */
if (triggerpos != -1) {
if (devc->cur_samplerate <= SR_MHZ(50))
triggerpos -= EVENTS_PER_CLUSTER - 1;
if (triggerpos < 0)
triggerpos = 0;
/* Find in which cluster the trigger occured. */
triggerts = triggerpos / 7;
}
/* For each ts. */
for (i = 0; i < 64; ++i) {
ts = *(uint16_t *) &buf[i * 16];
tsdiff = ts - *lastts;
*lastts = ts;
/* Decode partial chunk. */
if (limit_chunk && ts > limit_chunk)
return SR_OK;
/* Pad last sample up to current point. */
numpad = tsdiff * devc->samples_per_event - clustersize;
if (numpad > 0) {
for (j = 0; j < numpad; ++j)
samples[j] = *lastsample;
n = numpad;
}
/* Send samples between previous and this timestamp to sigrok. */
sent = 0;
while (sent < n) {
tosend = MIN(2048, n - sent);
packet.type = SR_DF_LOGIC;
packet.payload = &logic;
logic.length = tosend * sizeof(uint16_t);
logic.unitsize = 2;
logic.data = samples + sent;
sr_session_send(devc->cb_data, &packet);
sent += tosend;
}
n = 0;
event = (uint16_t *) &buf[i * 16 + 2];
cur_sample = 0;
/* For each event in cluster. */
for (j = 0; j < 7; ++j) {
/* For each sample in event. */
for (k = 0; k < devc->samples_per_event; ++k) {
cur_sample = 0;
/* For each probe. */
for (l = 0; l < devc->num_probes; ++l)
cur_sample |= (!!(event[j] & (1 << (l *
devc->samples_per_event + k)))) << l;
samples[n++] = cur_sample;
}
}
/* Send data up to trigger point (if triggered). */
sent = 0;
if (i == triggerts) {
/*
* Trigger is not always accurate to sample because of
* pipeline delay. However, it always triggers before
* the actual event. We therefore look at the next
* samples to pinpoint the exact position of the trigger.
*/
tosend = get_trigger_offset(samples, *lastsample,
&devc->trigger);
if (tosend > 0) {
packet.type = SR_DF_LOGIC;
packet.payload = &logic;
logic.length = tosend * sizeof(uint16_t);
logic.unitsize = 2;
logic.data = samples;
sr_session_send(devc->cb_data, &packet);
sent += tosend;
}
/* Only send trigger if explicitly enabled. */
if (devc->use_triggers) {
packet.type = SR_DF_TRIGGER;
sr_session_send(devc->cb_data, &packet);
}
}
/* Send rest of the chunk to sigrok. */
tosend = n - sent;
if (tosend > 0) {
packet.type = SR_DF_LOGIC;
packet.payload = &logic;
logic.length = tosend * sizeof(uint16_t);
logic.unitsize = 2;
logic.data = samples + sent;
sr_session_send(devc->cb_data, &packet);
}
*lastsample = samples[n - 1];
}
return SR_OK;
}
static int receive_data(int fd, int revents, void *cb_data)
{
struct sr_dev_inst *sdi = cb_data;
struct dev_context *devc = sdi->priv;
struct sr_datafeed_packet packet;
const int chunks_per_read = 32;
unsigned char buf[chunks_per_read * CHUNK_SIZE];
int bufsz, numchunks, i, newchunks;
uint64_t running_msec;
struct timeval tv;
(void)fd;
(void)revents;
/* Get the current position. */
sigma_read_pos(&devc->state.stoppos, &devc->state.triggerpos, devc);
numchunks = (devc->state.stoppos + 511) / 512;
if (devc->state.state == SIGMA_IDLE)
return TRUE;
if (devc->state.state == SIGMA_CAPTURE) {
/* Check if the timer has expired, or memory is full. */
gettimeofday(&tv, 0);
running_msec = (tv.tv_sec - devc->start_tv.tv_sec) * 1000 +
(tv.tv_usec - devc->start_tv.tv_usec) / 1000;
if (running_msec < devc->limit_msec && numchunks < 32767)
return TRUE; /* While capturing... */
else
hw_dev_acquisition_stop(sdi, sdi);
}
if (devc->state.state == SIGMA_DOWNLOAD) {
if (devc->state.chunks_downloaded >= numchunks) {
/* End of samples. */
packet.type = SR_DF_END;
sr_session_send(devc->cb_data, &packet);
devc->state.state = SIGMA_IDLE;
return TRUE;
}
newchunks = MIN(chunks_per_read,
numchunks - devc->state.chunks_downloaded);
sr_info("Downloading sample data: %.0f %%.",
100.0 * devc->state.chunks_downloaded / numchunks);
bufsz = sigma_read_dram(devc->state.chunks_downloaded,
newchunks, buf, devc);
/* TODO: Check bufsz. For now, just avoid compiler warnings. */
(void)bufsz;
/* Find first ts. */
if (devc->state.chunks_downloaded == 0) {
devc->state.lastts = *(uint16_t *) buf - 1;
devc->state.lastsample = 0;
}
/* Decode chunks and send them to sigrok. */
for (i = 0; i < newchunks; ++i) {
int limit_chunk = 0;
/* The last chunk may potentially be only in part. */
if (devc->state.chunks_downloaded == numchunks - 1) {
/* Find the last valid timestamp */
limit_chunk = devc->state.stoppos % 512 + devc->state.lastts;
}
if (devc->state.chunks_downloaded + i == devc->state.triggerchunk)
decode_chunk_ts(buf + (i * CHUNK_SIZE),
&devc->state.lastts,
&devc->state.lastsample,
devc->state.triggerpos & 0x1ff,
limit_chunk, sdi);
else
decode_chunk_ts(buf + (i * CHUNK_SIZE),
&devc->state.lastts,
&devc->state.lastsample,
-1, limit_chunk, sdi);
++devc->state.chunks_downloaded;
}
}
return TRUE;
}
/* Build a LUT entry used by the trigger functions. */
static void build_lut_entry(uint16_t value, uint16_t mask, uint16_t *entry)
{
int i, j, k, bit;
/* For each quad probe. */
for (i = 0; i < 4; ++i) {
entry[i] = 0xffff;
/* For each bit in LUT. */
for (j = 0; j < 16; ++j)
/* For each probe in quad. */
for (k = 0; k < 4; ++k) {
bit = 1 << (i * 4 + k);
/* Set bit in entry */
if ((mask & bit) &&
((!(value & bit)) !=
(!(j & (1 << k)))))
entry[i] &= ~(1 << j);
}
}
}
/* Add a logical function to LUT mask. */
static void add_trigger_function(enum triggerop oper, enum triggerfunc func,
int index, int neg, uint16_t *mask)
{
int i, j;
int x[2][2], tmp, a, b, aset, bset, rset;
memset(x, 0, 4 * sizeof(int));
/* Trigger detect condition. */
switch (oper) {
case OP_LEVEL:
x[0][1] = 1;
x[1][1] = 1;
break;
case OP_NOT:
x[0][0] = 1;
x[1][0] = 1;
break;
case OP_RISE:
x[0][1] = 1;
break;
case OP_FALL:
x[1][0] = 1;
break;
case OP_RISEFALL:
x[0][1] = 1;
x[1][0] = 1;
break;
case OP_NOTRISE:
x[1][1] = 1;
x[0][0] = 1;
x[1][0] = 1;
break;
case OP_NOTFALL:
x[1][1] = 1;
x[0][0] = 1;
x[0][1] = 1;
break;
case OP_NOTRISEFALL:
x[1][1] = 1;
x[0][0] = 1;
break;
}
/* Transpose if neg is set. */
if (neg) {
for (i = 0; i < 2; ++i) {
for (j = 0; j < 2; ++j) {
tmp = x[i][j];
x[i][j] = x[1-i][1-j];
x[1-i][1-j] = tmp;
}
}
}
/* Update mask with function. */
for (i = 0; i < 16; ++i) {
a = (i >> (2 * index + 0)) & 1;
b = (i >> (2 * index + 1)) & 1;
aset = (*mask >> i) & 1;
bset = x[b][a];
if (func == FUNC_AND || func == FUNC_NAND)
rset = aset & bset;
else if (func == FUNC_OR || func == FUNC_NOR)
rset = aset | bset;
else if (func == FUNC_XOR || func == FUNC_NXOR)
rset = aset ^ bset;
if (func == FUNC_NAND || func == FUNC_NOR || func == FUNC_NXOR)
rset = !rset;
*mask &= ~(1 << i);
if (rset)
*mask |= 1 << i;
}
}
/*
* Build trigger LUTs used by 50 MHz and lower sample rates for supporting
* simple pin change and state triggers. Only two transitions (rise/fall) can be
* set at any time, but a full mask and value can be set (0/1).
*/
static int build_basic_trigger(struct triggerlut *lut, struct dev_context *devc)
{
int i,j;
uint16_t masks[2] = { 0, 0 };
memset(lut, 0, sizeof(struct triggerlut));
/* Contant for simple triggers. */
lut->m4 = 0xa000;
/* Value/mask trigger support. */
build_lut_entry(devc->trigger.simplevalue, devc->trigger.simplemask,
lut->m2d);
/* Rise/fall trigger support. */
for (i = 0, j = 0; i < 16; ++i) {
if (devc->trigger.risingmask & (1 << i) ||
devc->trigger.fallingmask & (1 << i))
masks[j++] = 1 << i;
}
build_lut_entry(masks[0], masks[0], lut->m0d);
build_lut_entry(masks[1], masks[1], lut->m1d);
/* Add glue logic */
if (masks[0] || masks[1]) {
/* Transition trigger. */
if (masks[0] & devc->trigger.risingmask)
add_trigger_function(OP_RISE, FUNC_OR, 0, 0, &lut->m3);
if (masks[0] & devc->trigger.fallingmask)
add_trigger_function(OP_FALL, FUNC_OR, 0, 0, &lut->m3);
if (masks[1] & devc->trigger.risingmask)
add_trigger_function(OP_RISE, FUNC_OR, 1, 0, &lut->m3);
if (masks[1] & devc->trigger.fallingmask)
add_trigger_function(OP_FALL, FUNC_OR, 1, 0, &lut->m3);
} else {
/* Only value/mask trigger. */
lut->m3 = 0xffff;
}
/* Triggertype: event. */
lut->params.selres = 3;
return SR_OK;
}
static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
void *cb_data)
{
struct dev_context *devc;
struct clockselect_50 clockselect;
int frac, triggerpin, ret;
uint8_t triggerselect = 0;
struct triggerinout triggerinout_conf;
struct triggerlut lut;
devc = sdi->priv;
if (configure_probes(sdi) != SR_OK) {
sr_err("Failed to configure probes.");
return SR_ERR;
}
/* If the samplerate has not been set, default to 200 kHz. */
if (devc->cur_firmware == -1) {
if ((ret = set_samplerate(sdi, SR_KHZ(200))) != SR_OK)
return ret;
}
/* Enter trigger programming mode. */
sigma_set_register(WRITE_TRIGGER_SELECT1, 0x20, devc);
/* 100 and 200 MHz mode. */
if (devc->cur_samplerate >= SR_MHZ(100)) {
sigma_set_register(WRITE_TRIGGER_SELECT1, 0x81, devc);
/* Find which pin to trigger on from mask. */
for (triggerpin = 0; triggerpin < 8; ++triggerpin)
if ((devc->trigger.risingmask | devc->trigger.fallingmask) &
(1 << triggerpin))
break;
/* Set trigger pin and light LED on trigger. */
triggerselect = (1 << LEDSEL1) | (triggerpin & 0x7);
/* Default rising edge. */
if (devc->trigger.fallingmask)
triggerselect |= 1 << 3;
/* All other modes. */
} else if (devc->cur_samplerate <= SR_MHZ(50)) {
build_basic_trigger(&lut, devc);
sigma_write_trigger_lut(&lut, devc);
triggerselect = (1 << LEDSEL1) | (1 << LEDSEL0);
}
/* Setup trigger in and out pins to default values. */
memset(&triggerinout_conf, 0, sizeof(struct triggerinout));
triggerinout_conf.trgout_bytrigger = 1;
triggerinout_conf.trgout_enable = 1;
sigma_write_register(WRITE_TRIGGER_OPTION,
(uint8_t *) &triggerinout_conf,
sizeof(struct triggerinout), devc);
/* Go back to normal mode. */
sigma_set_register(WRITE_TRIGGER_SELECT1, triggerselect, devc);
/* Set clock select register. */
if (devc->cur_samplerate == SR_MHZ(200))
/* Enable 4 probes. */
sigma_set_register(WRITE_CLOCK_SELECT, 0xf0, devc);
else if (devc->cur_samplerate == SR_MHZ(100))
/* Enable 8 probes. */
sigma_set_register(WRITE_CLOCK_SELECT, 0x00, devc);
else {
/*
* 50 MHz mode (or fraction thereof). Any fraction down to
* 50 MHz / 256 can be used, but is not supported by sigrok API.
*/
frac = SR_MHZ(50) / devc->cur_samplerate - 1;
clockselect.async = 0;
clockselect.fraction = frac;
clockselect.disabled_probes = 0;
sigma_write_register(WRITE_CLOCK_SELECT,
(uint8_t *) &clockselect,
sizeof(clockselect), devc);
}
/* Setup maximum post trigger time. */
sigma_set_register(WRITE_POST_TRIGGER,
(devc->capture_ratio * 255) / 100, devc);
/* Start acqusition. */
gettimeofday(&devc->start_tv, 0);
sigma_set_register(WRITE_MODE, 0x0d, devc);
devc->cb_data = cb_data;
/* Send header packet to the session bus. */
std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN);
/* Add capture source. */
sr_source_add(0, G_IO_IN, 10, receive_data, (void *)sdi);
devc->state.state = SIGMA_CAPTURE;
return SR_OK;
}
static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
{
struct dev_context *devc;
uint8_t modestatus;
(void)cb_data;
sr_source_remove(0);
if (!(devc = sdi->priv)) {
sr_err("%s: sdi->priv was NULL", __func__);
return SR_ERR_BUG;
}
/* Stop acquisition. */
sigma_set_register(WRITE_MODE, 0x11, devc);
/* Set SDRAM Read Enable. */
sigma_set_register(WRITE_MODE, 0x02, devc);
/* Get the current position. */
sigma_read_pos(&devc->state.stoppos, &devc->state.triggerpos, devc);
/* Check if trigger has fired. */
modestatus = sigma_get_register(READ_MODE, devc);
if (modestatus & 0x20)
devc->state.triggerchunk = devc->state.triggerpos / 512;
else
devc->state.triggerchunk = -1;
devc->state.chunks_downloaded = 0;
devc->state.state = SIGMA_DOWNLOAD;
return SR_OK;
}
SR_PRIV struct sr_dev_driver asix_sigma_driver_info = {
.name = "asix-sigma",
.longname = "ASIX SIGMA/SIGMA2",
.api_version = 1,
.init = hw_init,
.cleanup = hw_cleanup,
.scan = hw_scan,
.dev_list = hw_dev_list,
.dev_clear = clear_instances,
.config_get = config_get,
.config_set = config_set,
.config_list = config_list,
.dev_open = hw_dev_open,
.dev_close = hw_dev_close,
.dev_acquisition_start = hw_dev_acquisition_start,
.dev_acquisition_stop = hw_dev_acquisition_stop,
.priv = NULL,
};