libsigrok/hardware/chronovu-la8/protocol.h

125 lines
3.9 KiB
C

/*
* This file is part of the libsigrok project.
*
* Copyright (C) 2011-2012 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef LIBSIGROK_HARDWARE_CHRONOVU_LA8_PROTOCOL_H
#define LIBSIGROK_HARDWARE_CHRONOVU_LA8_PROTOCOL_H
#include <glib.h>
#include <ftdi.h>
#include <stdint.h>
#include "libsigrok.h"
#include "libsigrok-internal.h"
#define LOG_PREFIX "chronovu-la8"
#define USB_VENDOR_ID 0x0403
#define USB_DESCRIPTION "ChronoVu LA8"
#define USB_VENDOR_NAME "ChronoVu"
#define USB_MODEL_NAME "LA8"
#define USB_MODEL_VERSION ""
#define NUM_CHANNELS 8
#define TRIGGER_TYPE "01"
#define SDRAM_SIZE (8 * 1024 * 1024)
#define MIN_NUM_SAMPLES 1
#define MAX_NUM_SAMPLES SDRAM_SIZE
#define BS 4096 /* Block size */
#define NUM_BLOCKS 2048 /* Number of blocks */
/* Private, per-device-instance driver context. */
struct dev_context {
/** FTDI device context (used by libftdi). */
struct ftdi_context *ftdic;
/** The currently configured samplerate of the device. */
uint64_t cur_samplerate;
/** The current sampling limit (in ms). */
uint64_t limit_msec;
/** The current sampling limit (in number of samples). */
uint64_t limit_samples;
void *cb_data;
/**
* A buffer containing some (mangled) samples from the device.
* Format: Pretty mangled-up (due to hardware reasons), see code.
*/
uint8_t mangled_buf[BS];
/**
* An 8MB buffer where we'll store the de-mangled samples.
* Format: Each sample is 1 byte, MSB is channel 7, LSB is channel 0.
*/
uint8_t *final_buf;
/**
* Trigger pattern (MSB = channel 7, LSB = channel 0).
* A 1 bit matches a high signal, 0 matches a low signal on a channel.
* Only low/high triggers (but not e.g. rising/falling) are supported.
*/
uint8_t trigger_pattern;
/**
* Trigger mask (MSB = channel 7, LSB = channel 0).
* A 1 bit means "must match trigger_pattern", 0 means "don't care".
*/
uint8_t trigger_mask;
/** Time (in seconds) before the trigger times out. */
uint64_t trigger_timeout;
/** Tells us whether an SR_DF_TRIGGER packet was already sent. */
int trigger_found;
/** TODO */
time_t done;
/** Counter/index for the data block to be read. */
int block_counter;
/** The divcount value (determines the sample period) for the LA8. */
uint8_t divcount;
/** This ChronoVu LA8's USB PID (multiple versions exist). */
uint16_t usb_pid;
};
/* protocol.c */
extern const int32_t chronovu_la8_hwcaps[];
extern uint64_t chronovu_la8_samplerates[];
extern SR_PRIV const char *chronovu_la8_channel_names[];
SR_PRIV void fill_supported_samplerates_if_needed(void);
SR_PRIV int is_valid_samplerate(uint64_t samplerate);
SR_PRIV uint8_t samplerate_to_divcount(uint64_t samplerate);
SR_PRIV int la8_write(struct dev_context *devc, uint8_t *buf, int size);
SR_PRIV int la8_read(struct dev_context *devc, uint8_t *buf, int size);
SR_PRIV int la8_close(struct dev_context *devc);
SR_PRIV int la8_close_usb_reset_sequencer(struct dev_context *devc);
SR_PRIV int la8_reset(struct dev_context *devc);
SR_PRIV int configure_channels(const struct sr_dev_inst *sdi);
SR_PRIV int set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate);
SR_PRIV int la8_read_block(struct dev_context *devc);
SR_PRIV void send_block_to_session_bus(struct dev_context *devc, int block);
#endif