The documented behavior is that it would disable auto-switching to it,
but users would still be available to toggle it.
This change restores that behavior. If the user has selected a layout
that will be preferred before cheching for this setting.
Ref: https://community.jitsi.org/t/how-to-disable-titleview/115093
In the past we used a PanResponder to detect user gestures in the sheet
to show a reduced version or a full-height version of it, and also to
close it.
There is an obvious conflic between the gestures and scrolling, which
didn't work all that great, but we could live with it.
After reactions were introduced we no longer rendered the 2 different
heights, so that functionaligy stopped being used but the PanResponder
still remained there.
This commit removes it completely and sets a max height of 75% on any
BottomSheet, so any tap outside will close it.
* fix(face-landmarks): set max detected faces up to 4
* add(face-landmarks): config for max faces detected
* fix(config.js): default value for capture interval face-landmarks
* add missing coma
When there is a password and lobby enabled, participants cannot enter password as the display name is stealing the focus.
When there is just password set the same field steals the focus from the password prompt.
* fix(multi-stream) RN Add listeners for track streaming status updates on large-video.
Fixes an issue where video on large-video is not being rendered when there is no filmstrip, i.e., there is only 1 remote participant in the call with source-name signaling enabled. Also do not show the screensharing indicator on the camera thumbnail when a virtual SS tile is created for the local screenshare.
* squash: add a comment
* fix(filmstrip) Add handlers for track streaming status on RN.
This is needed for switching between video and avatar when the track's streaming status changes in source-name signaling mode.
* squash: Add comment.
The device selection initialization on the prejoin use case was handled
like the welcome page. This was introducing issues with selecting the
stored devices and not the ones used, enabling the device selection when
it will fail and others.
On iOS Safari when the tracks for the previews are created the old ones
are auto destroyed which leads many issues like stop sending media while
the devie selectioin is displayed, error messages, etc.
Due to local storage limitations we might end up making the URL huge
when we save the state there. Avoid the issue at the root by never
storing URLs in that case.
Closes: https://github.com/jitsi/jitsi-meet/issues/11567
Add a screenshare status indicator at the bottom.
Fix the font and size of the resolution/fps stats so that it matches with that of the other thumbnails.
AV moderation does not work on brerakout rooms.
Since some of the options in the "breakoutRooms" config section no
longer apply, I moved the relevant ones to a new "participantsPane"
section.
This works together with the broader "notifications" config option. One
might choose to leave the existing option unespecified *thus allowing
all notifications) and then use this new one to be explicit about which
ones to disable.
There is a race condition in the root navigatior's initialization.
It's possible that it's initialized a touch too late and SDK users who
try to navigate to a conference end up stuck in the connecting screen
because the navigator is null.
This PR waits for it to be initilized by very unorthodox means, it's a
horrible hack which we need to undo, but for that we need to break
appart the inheritance relationship between App.{web,native},
AbstractApp and BaseApp because it's very inflexible.
The flags are now initialized very early so the naviggator sees if the
welcome page is enabled or not.
Only havee the screen in the hierarchy if we have a welcome page, since
it's the only way to access it.
Use goBack() from the navigator directly and avoid duplicating all props
to the screen.
It's about to become very confusing, since we are going to add actual
local recordings with video.
This feature was never fully finalizeed since it required manual
processing of the files, as they were not uploaded anywhere.
In addition, unless one opens the local audio device without any audio
processing first, any tracks opened later will have audio proceessing
turned on, something not desirable for the scenario this feature was
designed for in the first place: podcasts.
This feature will likely come back as a JaaS demo / MVP where the local
recording is made outside of the Jitsi Meet iframe.
* fix(multi-stream) update selector to find ss track by videoType or mediaType
* ref(multi-stream) move fake ss creation logic and support video type changed
* refactor(multi-stream) decouple sending and receiving multiple screenshare streams
* fix(multi-stream) fix receiver constraints with signaling and without multi-stream
* fix(mutli-stream) ensure plan b original SS thumbnail displays avatar
* fix(multi-stream) show fake SS for plan b sender
* refactor(multi-stream) poc for moving SS creation to state listener
* remove reference to fake SS creation
* fix lint errors
* rename to virtual screenshare participants
* fix minor bugs
* rename participant subscriber to specify web support only
Since all the auth logic is not ported to React on the web,
`_isWaitingForOwner` will always return `false` because the
`waitForOwner()` action is not (yet) used there.
THis fix always tries to hide the dialog no matter what, which is not a
Bad Thing to do anyway.
There is a related bug remaining, however: if one pressed "I am the
host" and then cancel, it doesn't goo back to the previous dialog, but
it completely kils the meeting. This is a compromise we'll have to live
with for a bit longer.
Fixes: https://github.com/jitsi/jitsi-meet/issues/11413
Fixes: https://github.com/jitsi/jitsi-meet/issues/11432
* add and remove JitsiTrackEvents.TRACK_STREAMING_STATUS_CHANGED listener in middlewares
* add/remove listeners in components that use track streaming status
* remove track streaming status handler from ConnectionIndicatorIcon and ConnectionIndicatorContent
* check video track change before hanlding track streaming status
- if hiddenPremeetingButtons is undefined, toolbarButtons overwrite decides what buttons to show
- if hiddenPremeetingButtons is empty array, all buttons are show on premeeting screen regardless of toolbarButtons
- if hiddenPremeetingButtons hides some buttons, only those buttons will be hidden regardless of toolbarButtons overwrite
* fix(device-selection) Enable device selection on mobile Safari.
With https://bugs.webkit.org/show_bug.cgi?id=179363 being fixed, we should now be able to switch between devices in call. Also, before the webkit fix, we were able to continue to use the old track when a new track was created for preview in device settings before joining the call. This doesn't work anymore after the fix. Therefore, always replace the track in redux even if the selected device hasn't changed. Depends on https://github.com/jitsi/lib-jitsi-meet/pull/1993.
* chore(deps): update lib-jitsi-meet@latest.
If last N goes down to 1 it will be stuck there since it's > 0 and will
be our `lastNSelected`. When limits are applied we'll take the minimum,
so it will end up being 1.
Once can end up in last N being 1 by several means, the more obvious one
by entering Picture-in-Picture mode on mobile.
Fix it by not using the previous last N value for the current
calculation, at all.
Fixes: https://github.com/jitsi/jitsi-meet/issues/10257
Closes: https://github.com/jitsi/jitsi-meet/pull/10491
Fixes screensharing selection issues. Now when there’s a screen share we just use the old VERTICAL_FILMSTRIP_VIEW layout
Add THUMBAIL_TYPE to determine how to display thumbnails
It seems that showing the device selection dialog on ios Safari will
leads to not working audio. This is temporary fix until we find out
better solution.
In case of conference failed as max number of occupants reached, we should skip clearing the local tracks to keep state of pre-join screen. Otherwise, on join we will join muted even though on prejoin screen it was unmuted on the initial attempt.
Fix dominant speaker not removed on leave
Fix video not shown in vertical filmstrip when a remote screensharing was on
Refactor pin/ unpin. Add click to unpin
Remove from stage on unpin, except dominant (just change pin state)
Fix local shows video on both stage and vertical filmstrip
Don't reorder on stage base on queue (sort all by id)
* fix: Drop duplicate call of wait for owner.
* fix: Fixes leaking listeners while waiting for host to join.
While waiting for the host to join on the dialog we attempt to join over and over again till we are admitted to enter the meeting. While doing that authRequired flag is on, and we were adding listeners on and on.
* feat: Introduces conference join in progress action.
This event is coming from lib-jitsi-meet and is fired when we receive the first presence of series when joining. It is always fired before joined event.
* fix: Moves testing middleware to use CONFERENCE_JOIN_IN_PROGRESS.
* fix: Moves follow-me middleware to use CONFERENCE_JOIN_IN_PROGRESS.
* fix: Moves some polls logic to middleware and use CONFERENCE_JOIN_IN_PROGRESS.
* fix: Moves reactions middleware to use CONFERENCE_JOIN_IN_PROGRESS.
* fix: Moves recordings middleware to use CONFERENCE_JOIN_IN_PROGRESS.
* fix: Moves shared-video middleware to use CONFERENCE_JOIN_IN_PROGRESS.
* fix: Moves videosipgw middleware to use CONFERENCE_JOIN_IN_PROGRESS.
* squash: Fix comments.
* fix: Fixes join in progress on web.
* fix: Moves variable extraction inside handlers.
* fix: Moves variable extraction inside handlers again.
* fix: Moves etherpad middleware to use CONFERENCE_JOIN_IN_PROGRESS.
On follow me enabled all participants will see the participants pinned by the moderator
Fix pinned indicator to work when stage filmstrip is disabled
Fix add participant on dominant speaker change: if the participant was already pinned keep it as pinned
Don’t add local participant on stage (on automatic selection)
prioritize participants with screen shares
support local screen share track
auto pin screen share
support screen share for large video
ensure fake screen share participants are sorted
fix local screen share in vertical filmstrip
fix local screen share in tile mode
use FakeScreenShareParticipant component for screen share thumbnails
ensure changes are behind feature flag and update jsdocs
fix bug where local screen share was not rendering
update receiver constraints to include SS source names
remove fake ss participant creation on track update
fix: handle screenshare muted change and track removal
refactor: update key values for sortedFakeScreenShareParticipants
address PR comments
refactor getter for screenshare tracks
rename state to sortedRemoteFakeScreenShareParticipants
* Pushes e2e pings to rtcstats
* linter fixes
* linter fixes
* Re-use existing event instead of introducing a new one.
* Don't update the connection info popup stats when the e2e rtt changes.
* Bumps ljm version to the latest
* e2e pings should work on mobile
* tweak the e2eRttChanged action properties
* fixes comments
Remove tint for participant in large view
Change pinned indicator from border to icon
On stage view move screen sharing indicator from top to bottom
On stage view show pinned indicator instead of moderator indicator
Update Android build to support gif
Use GIF format instead of animated webp
Show GIFs in chat messages
Display GIF over tile
Add Giphy button in reactions menu
Added Giphy dialog
Fix isGifMessage to also allow upper case
We used to have a registry which registered a single handlerwith RN.
THis was registered really early in the app.
When React Navigation was introduced we ddidn't realize it interacts
with the back button. In a stack nagigator it will navigate to the
previous screen. This meant our back button handling was broken.
This commit removes our previous registry and uses the RN back button
handler directly in the 2 components that use it: the conference and
bottom sheets.
Since these handlers are registered after navigation, our handlers are
going to run first so we cna implement the behavior we need, namely to
dismiss an open botom sheet or set the conference in PiP mode.
See multiple participants on stage
Pin and unpin to stage
Automatic selection of participants to be displayed on the stage filmstrip based on dominant speaker changes
Make Filmstrip a reusable component. Used by MainFilmstrip (old functionality) and the new StageFilmstrip
Rename DominantSpeakerName to StageParticipantNameLabel
Active border now showed only for the dominant speaker (no longer for the pinned participant)
Hide video from the vertical filmstrip for the participants on stage
Update video constraints
Updated pinned indicator
* add(highlight): mobile initial flow
* fix(hightlight): get meeting fqn on mobile
* fix(dynamic-branding): extract fqn on mobile
* fix(highlights): remove local fqn extraction and grounp dispatches in batch
* fix(dynamic-branding): check if state is defined in extract fqn
Converted LoadConfigOverlay to a JitsiScreen component that right now is part of navigation as ConnectingPage, plus I
separated appNative and other actions into web and native.
* feat(multi-stream-support) Add screenshare as a second video track to the call.
This feature is behind a sendMultipleVideoStreams config.js flag. sourceNameSignaling flag also needs to enabled. Sending multiple tracks is currently supported only on endpoints running in unified plan mode. However, clients with source-name signaling enabled and running in plan-b can still receive multiple streams .
* squash: check if there is an existing track before adding camera/desktop
* squash: enable multi-stream only on unified plan endpoints.
Now the algorithm that calculates the
rows/columns/thumbnail-width/thumbnail-height configuration will
go trough all possible configurations and will choose the one
that covers with thumbnails the biggest area of the window.
Show GIF menu in reactions menu
Search GIFs using the GIPHY API
Show GIFs as images in chat
Show GIFs on the thumbnail of the participant that sent it
Move GIF focus using up/ down arrows and send with Enter
Added analytics
Move label to LargeVideo so that's it's centred in the view instead of the whole screen
Move vertical filmstrip max width calculation to a function and use it to set the large video width
[features/base/app] <APP.componentDidCatch>: TypeError: Failed to set an indexed property on 'CSSStyleDeclaration': Indexed property setter is not supported.
...when new participant joins.
Repro steps:
1. With p2p disabled and source name signaling enabled.
2. Start a call with 2 tabs.
3. Reload the 2nd tab.
4. The receiver constraints should be updated when the 2nd
user rejoins. They were not updated, because
getTrackSourceNameByMediaTypeAndParticipant doesn't have
the track yet at the time when visibleRemoteParticipants
are updated. This is fixed by also checking on
the remote tracks state.
Re-calculate tile sizes after config loaded
Make local tile always respect the ratio in interface_config
Merge calculate size for vertical view functions into one function
* fix: Moves getDialInConferenceID, so we can reuse conf mapper url generation.
* fix: Moves getDialInNumbers, so we can reuse url generation.
* squash: Moves dialInInfo page path to constants.
* feat: Adds the location address as a param to the conf mapper request.
* feat: Adds option conf mapper and numbers urls to contain parameters (?).
* squash: Adds more doc comments.
* squash: Makes sure we strip url params if any, and they do not reach fetch.
Make conference info and toolbar appear on top of the filmstrip
After a breakpoint, filmstrip pushes over the stage view instead of appearing on top
On user resize make tiles wider; after a breakpoint show grid view in the filmstrip
On filmstrip visibility toggle animate stage view resize
Added config for filmstrip with disableResizableFilmstrip
This applies to android only, where we don't separate the local
thumbnail.
In portrait mode the local thumbnail needs to be on the right, aka the
last one. In landscape mode it needs to be on top, aka the first.
This "feature" has been dead (and most likely buggy) for years. The
recommended way is for apps to implement their own incoming call
handling and then call into the JitsiMeetActivity. We did not have those
APIs back then.
* feat: Handles hidden-from-recorder from jwt.
Hides the participant that has this flag in jwt from the recorder. A hidden meeting moderator.
Makes sure follows me works and no tracks are being added.
* squash: Skips showing notification when disabling
local audio and video.
* squash: Fixes comments.
* squash: Updates with ljm changes.
They don't render the toolbar so there is more space available.
The reason this commit does that is because getToolboxHeight will now
always be 0 for recorders.
* fix(facial-expressions): set window screen size from worker with the value from main thread
* fix(facial-expressions): refactor worker and add constants for message types
Workaround for the issue when the mouse enter event is not triggered in
the use case where the layout changes and the mouse appears onn top of the
thumbnail. Example: Closing the participant pane.
Added config to choose between recording and always mode
Created function to check if feature should be used
Removed check from stop feature as it now checks if the feature was previously on
Only get video track on feature start
The CONFERENCE_WILL_LEAVE reducer in base/conference wipes the state so
we cannot rely on the old room value.
We may want to revisit this in the future.
In addition, replace the from with a div because they shouldn't be
nested.
Since we are no longer in a form, manually validate the password. This
was necessary regardless, because it was possible to bypass the digits
rule by pressing "add".
[0] introduced sorted language keys, but we had the assumption that the
first one meant to indicate the default language.
Break that assumption and be explicit about English being the default
language.
[0]: 7fe319d965
Joining a room while hand is raised caused the local raised hand total to be wrong.
This is because when the local participant id changes, the old id is not cleared from the raisedHandQueue.
Only display Picture-in-Picture button when feature is available
Moved conference timer before title
Created new always-on container for labels
Moved recording labels to always-on
Updated expanded label to support new always-on labels
Added raised hands counter label
Added speaker - earpiece toggle button
Lifted state up
I'm updating to RN 0.63 instead of the latest (0.66 at the time of this writing)
so we can update the navigation related libraries to their latest versions, and
then proceed with the larger leap towards the latest RN.
- add possibility to allow execution of the button's routine besides triggering
`toolbarButtonClicked` API event
- keep backwards compatibility
- get rid of `ToolbarButton`
disableTileEnlargement config now uses old behaviour (small tiles, not just small video in the tiles)
Update Firefox scrollbar style to match webkit
Show more rows when height allows it instead of stretching a fixed number of rows, but make sure we always try to fill the whole viewport
Added constraints for how narrow portrait tiles can be and how wide landscape tiles can be
Video should cover whole tile in tile view unless disableTileEnlargement is set or video is portrait
Added min height in px for tiles
* feat: Use source name based receiver constraints
* add sourceNameSignaling feature flag to config
* move source name specific variables into if block
* ensure sourceName is defined in constraints
* use source name for selectedSources
* use selector to find video track by participant id
* add selector to encapsulate logic to get track source name
* refactor getTrackSourceNameByMediaTypeAndParticipant selector
* rename variable
* move flags config into Feature Flags section
* do not set constraints for local large video
* rename prioritizedSources to onStageSources
* fix flow error
* refactor visibleRemoteTrackSourceNames to a constant
* use selector to get feature flags
* rename selector function
* fix flow error
* add selector for sourceNameSignaling feature flag
* feat: Drops hide self-view setting from profile tab.
* feat: Moves function for disableSelfView value in base/settings.
* squash: Drops notification.
* feat: Move hide self view option in more tab.
* feat: Move hide self view option in more tab.
* feat: Adds option to disable self view UI settings.
* squash: Disable settings when controlled from config.
Moving to breakout room and back in main room do not fire videoConferenceLeft events.
And the videoConferenceJoined was reporting wrong conference name on join.
Update video thumbnail design
Update design of indicators
In filmstrip view move Screen Sharing indicator to the top
Removed dominant speaker indicator
Use ContextMenu component for the connection stats popover
Combine Remove video menu and Meeting participant context menu into one component
Moved some styles from SCSS to JSS
Fix mobile avatars too big
Fix mobile horizontal scroll
Created button for Send to breakout room action
* fix: Fixes disable moderation sounds in meeting.
Moderators in the meeting were sending presence update after one moderator turn it on, which even my result a inconsistent state and flipping the state between moderators several times.
* squash: Adds option to disable reaction moderation.
* fix(speaker-stats): prevent search from closing when enter pressed and from keeping previous state
* fix(speaker-stats): remove unnecessary blank lines
* fix(speaker-stats): add empty dependencies to prevent dismiss callback
* add(speaker-stats): reset search criteria action
* feat(tracks) Clean up the track if a source addition is rejected.
When jicofo rejects a source-add because of sendder limits, dispose and remove the local track from the conference.
* chore(deps) update LJM to latest.
Added config option disableSelfView. This disables it on web and native
Added button on local video menu and toggle in settings on web to change the setting
Close the menu after sending a participant to a breakout room, that will detach
the context menu from the current participant and it will work properly when
they join back.
* fix(screenshot-capture) Update screenshot capture feature
Add participants jid list to request
Enable screenshot capture only when recording is also on
Updated interval
* feat(conference) Impl audio/video mute disable when sender limit is reached.
Jicofo sends a presence when the audio/video sender limit is reached in the conference. The client can then proceed to disable the audio and video mute buttons when this occurs.
* squash: use a different action type and show notification.
Don't show more menu on the main room
Fix join room on mobile web
When moving to room reset breakout rooms state to avoid showing incorrect data before response from prosody is received
This event is the event host applications need to listen to for knowing when to
dispose the SDK from now on.
Since the introduction of breakout rooms it's possible that we navigate from one
meeting to another, so there will be several conference join / terminations.
In addition, local track destruction is now moved to SET_ROOM when there is no
room, aka, we are going back to the welcome page or to the black page.
Calinteodor
Titus Moldovan
hmuresan
Robert Pintilii
Nils Ohlmeier
Shahab
Saúl Ibarra Corretgé
Gabriel Borlea
Horatiu Muresan
Avram Tudor
Дамян Минков
Werner Fleischer
Jaya Allamsetty
Hristo Terezov
Gabriel Borlea
George Politis
pangrr
Mihaela Dumitru
William Liang
William Liang
Shahab
Tudor D. Pop
zygisS22
Christoph Settgast
Doganbros
Pawel Domas
Izak Glasencnik
Calinteodor
Shawn Chin
Shawn
tudordan7
nbeck.indy
Avram Tudor
Akshay Raje
tmoldovan8x8
abora8x8
Roshan Pulapura
wfleischer
Vlad Piersec
Jaya Allamsetty
Andrei Oltean
Jasper Hugo
Andrei Gavrilescu
Alex Bumbu