kicad/pcbnew/class_drawsegment.h

/**
 * @file class_drawsegment.h
 * @brief Class to handle a graphic segment.
 */

#ifndef CLASS_DRAWSEGMENT_H_
#define CLASS_DRAWSEGMENT_H_


#include "class_board_item.h"
#include "PolyLine.h"


class LINE_READER;
class EDA_DRAW_FRAME;
class MODULE;


class DRAWSEGMENT : public BOARD_ITEM
{
public:
    int     m_Width;            // thickness of lines ...
    wxPoint m_Start;            // Line start point or Circle and Arc center
    wxPoint m_End;              // Line end point or circle and arc start point

    int     m_Shape;            // Shape: line, Circle, Arc
    int     m_Type;             // Used in complex associations ( Dimensions.. )
    int     m_Angle;            // Used only for Arcs: Arc angle in 1/10 deg
    wxPoint m_BezierC1;         // Bezier Control Point 1
    wxPoint m_BezierC2;         // Bezier Control Point 1

protected:
    std::vector<wxPoint>    m_BezierPoints;
    std::vector<wxPoint>    m_PolyPoints;

public:
    DRAWSEGMENT( BOARD_ITEM* aParent, KICAD_T idtype = PCB_LINE_T );
    ~DRAWSEGMENT();

    DRAWSEGMENT* Next() const { return (DRAWSEGMENT*) Pnext; }
    DRAWSEGMENT* Back() const { return (DRAWSEGMENT*) Pback; }

    void SetWidth( int aWidth ) { m_Width = aWidth; }

    void SetStart( const wxPoint& aStart ) { m_Start = aStart; }

    void SetEnd( const wxPoint& aEnd ) { m_End = aEnd; }

    /**
     * Function SetAngle
     * sets the angle for arcs, and normalizes it within the range 0 - 360 degrees.
     * @param aAngle is tenths of degrees, but will soon be degrees.
     */
    void SetAngle( double aAngle );     // encapsulates the transition to degrees

    void SetType( int aType ) { m_Type = aType; }

    void SetShape( int aShape ) { m_Shape = aShape; }

    void SetBezControl1( const wxPoint& aPoint ) { m_BezierC1 = aPoint; }
    void SetBezControl2( const wxPoint& aPoint ) { m_BezierC2 = aPoint; }

    /**
     * Function GetPosition
     * returns the position of this object.
     * Required by pure virtual BOARD_ITEM::GetPosition()
     * @return const wxPoint - The position of this object.
     */
    const wxPoint GetPosition() const
    {
        return m_Start;
    }

    void SetPosition( const wxPoint& aPos ) { m_Start = aPos; }

    /**
     * Function GetStart
     * returns the starting point of the graphic
     */
    wxPoint      GetStart() const;

    /**
     * Function GetEnd
     * returns the ending point of the graphic
     */
    wxPoint      GetEnd() const;

    /**
     * Function GetRadius
     * returns the radius of this item
     * Has meaning only for arc and circle
     */
    int         GetRadius() const
    {
        double radius = hypot( (double) (m_End.x - m_Start.x), (double) (m_End.y - m_Start.y) );
        return wxRound( radius );
    }

    /**
     * Function GetParentModule
     * returns a pointer to the parent module, or NULL if DRAWSEGMENT does not
     * belong to a module.
     * @return MODULE* - pointer to the parent module or NULL.
     */
    MODULE* GetParentModule() const;

    std::vector<wxPoint>& GetBezierPoints() { return m_BezierPoints; };
    std::vector<wxPoint>& GetPolyPoints()   { return m_PolyPoints; };

    void SetBezierPoints( std::vector<wxPoint>& aPoints )
    {
        m_BezierPoints = aPoints;
    }

    void SetPolyPoints( std::vector<wxPoint>& aPoints )
    {
        m_PolyPoints = aPoints;
    }

    /**
     * Function Save
     * writes the data structures for this object out to a FILE in "*.brd" format.
     * @param aFile The FILE to write to.
     * @return bool - true if success writing else false.
     */
    bool         Save( FILE* aFile ) const;

    bool         ReadDrawSegmentDescr( LINE_READER* aReader );

    void         Copy( DRAWSEGMENT* source );


    void         Draw( EDA_DRAW_PANEL* panel, wxDC* DC,
                       int aDrawMode, const wxPoint& aOffset = ZeroOffset );

    /**
     * Function DisplayInfo
     * has knowledge about the frame and how and where to put status information
     * about this object into the frame's message panel.
     * Is virtual from EDA_ITEM.
     * @param frame A PCB_BASE_FRAME in which to print status information.
     */
    virtual void DisplayInfo( EDA_DRAW_FRAME* frame );


    /**
     * Function GetBoundingBox
     * returns the orthogonal, bounding box of this object for display purposes.
     * This box should be an enclosing perimeter for visible components of this
     * object, and the units should be in the pcb or schematic coordinate system.
     * It is OK to overestimate the size by a few counts.
     */
    virtual EDA_RECT GetBoundingBox() const;


    /**
     * Function HitTest
     * tests if the given wxPoint is within the bounds of this object.
     * @param aRefPos A wxPoint to test
     * @return bool - true if a hit, else false
     */
    bool         HitTest( const wxPoint& aRefPos );

    /**
     * Function HitTest (overlayed)
     * tests if the given EDA_RECT intersect this object.
     * For now, an ending point must be inside this rect.
     * @param refArea the given EDA_RECT to test
     * @return bool - true if a hit, else false
     */
    bool         HitTest( EDA_RECT& refArea );

    /**
     * Function GetClass
     * returns the class name.
     * @return wxString
     */
    wxString GetClass() const
    {
        return wxT( "DRAWSEGMENT" );
    }


    /**
     * Function GetLength
     * returns the length of the track using the hypotenuse calculation.
     * @return double - the length of the track
     */
    double  GetLength() const
    {
        wxPoint delta = GetEnd() - GetStart();

        return hypot( double( delta.x ), double( delta.y ) );
    }


    /**
     * Function Move
     * move this object.
     * @param aMoveVector - the move vector for this object.
     */
    virtual void Move( const wxPoint& aMoveVector )
    {
        m_Start += aMoveVector;
        m_End   += aMoveVector;
    }


    /**
     * Function Rotate
     * Rotate this object.
     * @param aRotCentre - the rotation point.
     * @param aAngle - the rotation angle in 0.1 degree.
     */
    virtual void Rotate( const wxPoint& aRotCentre, int aAngle );

    /**
     * Function Flip
     * Flip this object, i.e. change the board side for this object
     * @param aCentre - the rotation point.
     */
    virtual void Flip( const wxPoint& aCentre );

    /**
     * Function TransformShapeWithClearanceToPolygon
     * Convert the track shape to a closed polygon
     * Used in filling zones calculations
     * Circles and arcs are approximated by segments
     * @param aCornerBuffer = a buffer to store the polygon
     * @param aClearanceValue = the clearance around the pad
     * @param aCircleToSegmentsCount = the number of segments to approximate a circle
     * @param aCorrectionFactor = the correction to apply to circles radius to keep
     * clearance when the circle is approximated by segment bigger or equal
     * to the real clearance value (usually near from 1.0)
     */
    void TransformShapeWithClearanceToPolygon( std::vector <CPolyPt>& aCornerBuffer,
                                               int                    aClearanceValue,
                                               int                    aCircleToSegmentsCount,
                                               double                 aCorrectionFactor );

    virtual wxString GetSelectMenuText() const;

    virtual BITMAP_DEF GetMenuImage() const { return  add_dashed_line_xpm; }

#if defined(DEBUG)
    void Show( int nestLevel, std::ostream& os );
#endif
};

#endif  // CLASS_DRAWSEGMENT_H_