D_PAD conversion: m_Pos converted

PCB_ITEM: GetPosition -- removed reference
load/save length in config
This commit is contained in:
Vladimir Ur 2011-11-16 21:04:12 +04:00
commit 959e338698
65 changed files with 1065 additions and 665 deletions

View File

@ -884,7 +884,7 @@ void EDGE_MODULE::Draw3D( EDA_3D_CANVAS* glcanvas )
}
}
/** @TODO: move D_PAD method to appropriate file */
/* Draw 3D pads. */
void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
{
@ -903,8 +903,8 @@ void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
int color;
scale = g_Parm_3D_Visu.m_BoardScale;
holeX = (double) TO_LEGACY_LU_DBL( m_Drill.x ) * scale / 2;
holeY = (double) TO_LEGACY_LU_DBL( m_Drill.y ) * scale / 2;
holeX = (double) TO_LEGACY_LU_DBL( m_Drill.x() ) * scale / 2;
holeY = (double) TO_LEGACY_LU_DBL( m_Drill.y() ) * scale / 2;
hole = MIN( holeX, holeY );
/* Calculate the center of the pad. */
@ -914,12 +914,12 @@ void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
xc = ux0;
yc = uy0;
dx = dx0 = TO_LEGACY_LU( m_Size.x ) >> 1;
dy = dy0 = TO_LEGACY_LU( m_Size.y ) >> 1;
dx = dx0 = TO_LEGACY_LU( m_Size.x() ) >> 1;
dy = dy0 = TO_LEGACY_LU( m_Size.y() ) >> 1;
angle = m_Orient;
drillx = m_Pos.x * scale;
drilly = m_Pos.y * scale;
drillx = TO_LEGACY_LU( m_Pos.x() ) * scale;
drilly = TO_LEGACY_LU( m_Pos.y() ) * scale;
/* Draw the pad hole (TODO: draw OBLONG hole) */
if( holeX && holeY )
@ -980,13 +980,13 @@ void D_PAD::Draw3D( EDA_3D_CANVAS* glcanvas )
{
delta_cx = dx - dy;
delta_cy = 0;
w = TO_LEGACY_LU( m_Size.y ) * scale;
w = TO_LEGACY_LU( m_Size.y() ) * scale;
}
else /* Vertical ellipse */
{
delta_cx = 0;
delta_cy = dy - dx;
w = TO_LEGACY_LU( m_Size.x ) * scale;
w = TO_LEGACY_LU( m_Size.x() ) * scale;
}
RotatePoint( &delta_cx, &delta_cy, angle );

View File

@ -37,13 +37,6 @@
#include "auxiliary.h"
#ifndef max
#define max( a, b ) ( ( (a) > (b) ) ? (a) : (b) )
#endif
#ifndef min
#define min( a, b ) ( ( (a) < (b) ) ? (a) : (b) )
#endif
// Define some types used here from boost::polygon
namespace bpl = boost::polygon; // bpl = boost polygon library
using namespace bpl::operators; // +, -, =, ...
@ -476,7 +469,7 @@ void BezierToPolyline( std::vector <potrace_dpoint_t>& aCornersBuffer,
* occur at an endpoint. */
dd0 = sq( p1.x - 2 * p2.x + p3.x ) + sq( p1.y - 2 * p2.y + p3.y );
dd1 = sq( p2.x - 2 * p3.x + p4.x ) + sq( p2.y - 2 * p3.y + p4.y );
dd = 6 * sqrt( max( dd0, dd1 ) );
dd = 6 * sqrt( fmax( dd0, dd1 ) );
e2 = 8 * delta <= dd ? 8 * delta / dd : 1;
epsilon = sqrt( e2 ); /* necessary interval size */

View File

@ -418,7 +418,7 @@ int ReturnValueFromString( EDA_UNITS_T aUnit, const wxString& TextValue, int Int
const LENGTH_UNIT_DESC MillimetreDesc =
{
LENGTH_UNITS<LENGTH_DEF>::millimetre(),
LENGTH_UNITS<LENGTH_PCB>::millimetre(),
wxT( "mm" ),
6
};
@ -426,7 +426,7 @@ const LENGTH_UNIT_DESC MillimetreDesc =
const LENGTH_UNIT_DESC InchDesc =
{
LENGTH_UNITS<LENGTH_DEF>::inch(),
LENGTH_UNITS<LENGTH_PCB>::inch(),
wxT( "\"" ),
7
};
@ -434,7 +434,7 @@ const LENGTH_UNIT_DESC InchDesc =
const LENGTH_UNIT_DESC MilDesc =
{
LENGTH_UNITS<LENGTH_DEF>::mil(),
LENGTH_UNITS<LENGTH_PCB>::mil(),
wxT( "mil" ),
5
};
@ -442,7 +442,7 @@ const LENGTH_UNIT_DESC MilDesc =
const LENGTH_UNIT_DESC UnscaledDesc = /* stub */
{
LENGTH_DEF::quantum(),
LENGTH_PCB::quantum(),
wxT( "" ),
4
};
@ -461,7 +461,7 @@ const LENGTH_UNIT_DESC *UnitDescription( EDA_UNITS_T aUnit ) {
/* TODO: localisation */
wxString LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_DEF aValue,
wxString LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_PCB aValue,
bool aAdd_unit_symbol ) {
wxString StringValue;
double value_to_print;
@ -490,11 +490,11 @@ wxString LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_DEF aValue,
return StringValue;
}
LENGTH_DEF StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextValue )
LENGTH_PCB StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextValue )
{
LENGTH_DEF Value;
double dtmp = 0;
LENGTH_PCB Value;
double dtmp = 0;
/* Acquire the 'right' decimal point separator */
const struct lconv* lc = localeconv();
@ -544,21 +544,21 @@ LENGTH_DEF StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextVa
aUnit = &MilDesc;
}
Value = LENGTH_DEF( dtmp * LENGTH< double, 1 >( aUnit->m_Value ) );
Value = LENGTH_PCB( dtmp * LENGTH< double, 1 >( aUnit->m_Value ) );
return Value;
}
void LengthToTextCtrl( wxTextCtrl& TextCtr, LENGTH_DEF Value )
void LengthToTextCtrl( wxTextCtrl& TextCtr, LENGTH_PCB Value )
{
wxString msg = LengthToString( UnitDescription( g_UserUnit ), Value );
TextCtr.SetValue( msg );
}
LENGTH_DEF LengthFromTextCtrl( const wxTextCtrl& TextCtr )
LENGTH_PCB LengthFromTextCtrl( const wxTextCtrl& TextCtr )
{
LENGTH_DEF value;
LENGTH_PCB value;
wxString msg = TextCtr.GetValue();
value = StringToLength( UnitDescription( g_UserUnit ), msg );

View File

@ -802,3 +802,85 @@ void PARAM_CFG_LIBNAME_LIST::SaveParam( wxConfigBase* aConfig )
aConfig->Write( configkey, libname );
}
}
/*
* LENGTH_PCB
*/
PARAM_CFG_LENGTH_PCB::PARAM_CFG_LENGTH_PCB( const wxChar* ident,
LENGTH_PCB* ptparam,
LENGTH_PCB default_val,
LENGTH_PCB min,
LENGTH_PCB max,
const wxChar* group ) :
PARAM_CFG_BASE( ident, PARAM_DOUBLE, group )
{
m_Pt_param = ptparam;
m_Default = default_val;
m_Min = min;
m_Max = max;
}
PARAM_CFG_LENGTH_PCB::PARAM_CFG_LENGTH_PCB( bool Insetup,
const wxChar* ident,
LENGTH_PCB* ptparam,
LENGTH_PCB default_val,
LENGTH_PCB min,
LENGTH_PCB max,
const wxChar* group ) :
PARAM_CFG_BASE( ident, PARAM_DOUBLE, group )
{
m_Pt_param = ptparam;
m_Default = default_val;
m_Min = min;
m_Max = max;
m_Setup = Insetup;
}
/** ReadParam
* read the value of parameter this stored in aConfig
* @param aConfig = the wxConfigBase that store the parameter
*/
void PARAM_CFG_LENGTH_PCB::ReadParam( wxConfigBase* aConfig )
{
if( m_Pt_param == NULL || aConfig == NULL )
return;
LENGTH_PCB ftmp;
wxString msg;
msg = aConfig->Read( m_Ident, wxT( "" ) );
if( msg.IsEmpty() )
{
ftmp = m_Default;
}
else
{
double t;
msg.ToDouble( &t );
ftmp = FROM_LEGACY_LU( t );
if( (ftmp < m_Min) || (ftmp > m_Max) )
ftmp = m_Default;
}
*m_Pt_param = ftmp;
}
/** SaveParam
* save the the value of parameter this stored in aConfig
* @param aConfig = the wxConfigBase that can store the parameter
*/
void PARAM_CFG_LENGTH_PCB::SaveParam( wxConfigBase* aConfig )
{
if( m_Pt_param == NULL || aConfig == NULL )
return;
#ifdef KICAD_NANOMETRE
aConfig->Write( m_Ident, TO_LEGACY_LU_DBL( *m_Pt_param ) );
#else // save it as int to mantain compatibility while in transition to nanoscale
aConfig->Write( m_Ident, TO_LEGACY_LU( *m_Pt_param ) );
#endif
}

View File

@ -167,7 +167,7 @@ public:
* @return const wxPoint& - The position of this object.
* This function exists mainly to satisfy the virtual GetPosition() in parent class
*/
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return m_Start; // it had to be start or end.
}

View File

@ -76,9 +76,13 @@ public:
/**
* Function GetPosition
* returns the position of this object.
* @return wxPoint& - The position of this object, non-const so it can be changed
* @return wxPoint - The position of this object
* It seems this function could not return modifiable reference as this
* contradict good design practice: as the class could be able
* doing internal recalculations on reposition.
* @TODO: Check all the GetPosition calls for position assignments.
*/
virtual wxPoint& GetPosition() = 0;
virtual wxPoint GetPosition() const = 0;
/**
* Function GetLayer
@ -313,10 +317,9 @@ public:
{}
//-----< satisfy some virtual functions >------------------------------
wxPoint& GetPosition()
wxPoint GetPosition() const
{
static wxPoint dummy;
return dummy;
return wxPoint(0, 0);
}
void Draw( EDA_DRAW_PANEL* DrawPanel, wxDC* DC,

View File

@ -37,7 +37,7 @@
#ifdef KICAD_NANOMETRE
#include "length.h"
#include "lengthpcb.h"
#endif
class wxAboutDialogInfo;
@ -385,21 +385,21 @@ int ReturnValueFromTextCtrl( const wxTextCtrl& TextCtr, int Internal_Unit );
struct LENGTH_UNIT_DESC
{
LENGTH_DEF m_Value;
const wxString m_Symbol;
int m_Precision;
LENGTH_PCB m_Value;
const wxString m_Symbol;
int m_Precision;
};
extern const LENGTH_UNIT_DESC MillimetreDesc, InchDesc, MilDesc;
const LENGTH_UNIT_DESC *UnitDescription( EDA_UNITS_T aUnit );
LENGTH_DEF StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextValue );
wxString LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_DEF aValue,
LENGTH_PCB StringToLength( const LENGTH_UNIT_DESC *aUnit, const wxString& TextValue );
wxString LengthToString( const LENGTH_UNIT_DESC *aUnit, LENGTH_PCB aValue,
bool aAdd_unit_symbol = false );
void LengthToTextCtrl( wxTextCtrl& TextCtr, LENGTH_DEF Value );
LENGTH_DEF LengthFromTextCtrl( const wxTextCtrl& TextCtr );
void LengthToTextCtrl( wxTextCtrl& TextCtr, LENGTH_PCB Value );
LENGTH_PCB LengthFromTextCtrl( const wxTextCtrl& TextCtr );
/* transition macros */
#define STR_TO_LENGTH( unit, str, iu ) \

View File

@ -8,12 +8,9 @@
#ifndef LENGTH_H_INCLUDED
#define LENGTH_H_INCLUDED 1
#include "limited_int.h"
#include <math.h>
/* type to be used by length units by default */
typedef LIMITED_INT< int > DEF_LENGTH_VALUE;
/**
/*!
* Length template class.
* @param T actual type holding a value (be aware of precision and range!)
* @param P power of length unit: 1 - length, 2 - area, 3 - volume, -1 - lin. density etc...
@ -47,26 +44,34 @@ typedef LIMITED_INT< int > DEF_LENGTH_VALUE;
*
*/
template < typename T = DEF_LENGTH_VALUE, int P = 1 > class LENGTH;
template < typename T = double, int P = 1 > class LENGTH;
typedef LENGTH<DEF_LENGTH_VALUE, 1> LENGTH_DEF;
/**
* Length units contained in this class
/*!
* Length units.
*/
template <typename T> class LENGTH_UNITS;
/**
* For internal needs
/*!
* The template that "inflate" LENGTH< T, 0 > class to T. Used with (*) and (/).
*/
template < typename T, int P > struct LENGTH_TRAITS
{
typedef LENGTH<T, P> flat;
};
template < typename T > struct LENGTH_TRAITS< T, 0 >
{
/* length dimension to power 0 is just a number, so LENGTH<T, 0> should be automatically converted to T */
typedef T flat;
};
/*!
* The template for value type conversions
*/
template < typename T > struct LENGTH_CASTS
{
/*! This function to convert length value to given type T. */
template< typename X > static T cast( const X x )
{
return T( x );
@ -89,6 +94,9 @@ template <> struct LENGTH_CASTS < long >
}
};
/** Forward declaration for LIMITED_INT to use with casts. */
template < typename T > class LIMITED_INT;
template < typename T > struct LENGTH_CASTS < LIMITED_INT< T > >
{
static LIMITED_INT< T > cast( const double x )
@ -97,12 +105,6 @@ template < typename T > struct LENGTH_CASTS < LIMITED_INT< T > >
}
};
template < typename T > struct LENGTH_TRAITS< T, 0 >
{
/* length dimension to power 0 is just a number, so LENGTH<T, 0> should be automatically converted to T */
typedef T flat;
};
template< typename T, int P > class LENGTH
{
friend class LENGTH_UNITS< T >;
@ -110,29 +112,36 @@ template< typename T, int P > class LENGTH
template < typename Y, int R > friend class LENGTH;
protected:
T m_U;
LENGTH( T units ) : m_U( units )
T u;
LENGTH( T units ) : u( units )
{
}
static T RawValue( const LENGTH<T, P> &x )
{
return x.m_U;
return x.u;
}
static T RawValue( const T& x )
{
return x;
}
public:
typedef T value_type;
enum
{
dimension = P
};
template< typename U > LENGTH( const LENGTH< U, P > &orig )
: m_U( LENGTH_CASTS < T >::cast( orig.m_U ) )
: u( LENGTH_CASTS < T >::cast( orig.u ) )
{
}
LENGTH( void ) : m_U()
LENGTH( void ) : u()
{
}
@ -149,134 +158,181 @@ public:
LENGTH<T, P> & operator = ( const LENGTH<T, P> & y )
{
this->m_U = y.m_U;
this->u = y.u;
return *this;
}
template< typename Y > operator LENGTH< Y, P > ( void )
{
return LENGTH< Y, P >( this->m_U );
return LENGTH< Y, P >( this->u );
}
/*************************/
/* comparisons and tests */
/*************************/
bool operator ==( const LENGTH < T, P > y ) const
{
return m_U == y.m_U;
return u == y.u;
}
bool operator !=( const LENGTH < T, P > y ) const
{
return m_U != y.m_U;
return u != y.u;
}
bool operator <( const LENGTH < T, P > y ) const
{
return m_U < y.m_U;
return u < y.u;
}
bool operator >=( const LENGTH < T, P > y ) const
{
return m_U >= y.m_U;
return u >= y.u;
}
bool operator >( const LENGTH < T, P > y ) const
{
return m_U > y.m_U;
return u > y.u;
}
bool operator <=( const LENGTH < T, P > y ) const
{
return m_U <= y.m_U;
return u <= y.u;
}
bool operator !( void ) const
{
return !m_U;
return !u;
}
/*************************/
/* basic arithmetic */
/*************************/
LENGTH< T, P > operator - ( void ) const
{
return LENGTH<T, P>(-this->m_U);
LENGTH< T, P > z;
z.u = -u;
return z;
}
LENGTH< T, P > operator - ( const LENGTH< T, P > y ) const
LENGTH< T, P >& operator -= ( const LENGTH< T, P > y )
{
return m_U - y.m_U;
u -= y.u;
return *this;
}
LENGTH< T, P > operator + ( const LENGTH< T, P > y ) const
friend LENGTH< T, P > operator - ( const LENGTH< T, P > x, const LENGTH< T, P > y )
{
return m_U + y.m_U;
LENGTH< T, P > z = x;
z -= y;
return z;
}
LENGTH< T, P >& operator += ( const LENGTH< T, P > y )
{
u += y.u;
return *this;
}
friend LENGTH< T, P > operator + ( const LENGTH< T, P > x, const LENGTH< T, P > y )
{
LENGTH< T, P > z = x;
z += y;
return z;
}
LENGTH< T, P >& operator *= ( const T y )
{
u *= y;
return *this;
}
LENGTH< T, P > operator * ( const T & y) const
{
LENGTH< T, P > z = *this;
z *= y;
return z;
}
template < int R >
typename LENGTH_TRAITS< T, P + R >::flat operator * ( const LENGTH<T, R> &y ) const
{
return m_U * y.m_U;
}
LENGTH< T, P > operator * ( const T & y) const
{
return m_U * y;
}
LENGTH< T, P > friend operator * ( const T &y, const LENGTH<T, P> &x )
{
return x.m_U * y;
LENGTH< T, P > z;
z.u = u * y.u;
return z;
}
LENGTH< T, P > friend operator * ( const T &y, const LENGTH<T, P> &x )
{
return x.u * y;
}
LENGTH< T, P >& operator /= ( const T y )
{
u /= y;
return *this;
}
LENGTH< T, P > operator / ( const T &y ) const
{
return u / y;
}
template < int R >
typename LENGTH_TRAITS< T, P - R >::flat operator / ( const LENGTH<T, R> &y ) const
{
return m_U / y.m_U;
}
LENGTH< T, P > operator / ( const T &y ) const
{
return m_U / y;
}
LENGTH< T, -P > friend operator / ( const T &y, const LENGTH< T, P > &x )
{
return y / x.m_U;
}
/*************************/
/* assignment arithmetic */
/*************************/
LENGTH< T, P >& operator -= ( const LENGTH< T, P > y )
{
m_U -= y.m_U;
return *this;
}
LENGTH< T, P >& operator += ( const LENGTH< T, P > y )
{
m_U += y.m_U;
return *this;
}
LENGTH< T, P >& operator *= ( const T y )
{
m_U *= y;
return *this;
}
LENGTH< T, P >& operator /= ( const T y )
{
m_U /= y;
return *this;
return u / y.u;
}
/*************************/
/* more functions */
/*************************/
LENGTH< T, -P > friend operator / ( const T &y, const LENGTH< T, P > &x )
{
return y / x.u;
}
/******************************/
/* algebraic functions */
/******************************/
friend LENGTH< T, P > abs( LENGTH< T, P > y )
{
return 0 < y.u? y : -y;
}
friend LENGTH< T, P > max( LENGTH< T, P > x, LENGTH< T, P > y )
{
LENGTH< T, P > z;
z.u = hypot( x.u, y.u );
return z;
}
friend LENGTH< T, P > sqrt( LENGTH< T, P*2 > y )
{
return sqrt( y.m_U );
LENGTH< T, P > z;
z.u = sqrt( y.u );
return z;
}
friend LENGTH< T, P > cbrt( LENGTH< T, P*3 > y )
{
return cbrt( y.m_U );
LENGTH< T, P > z;
z.u = cbrt( y.u );
return z;
}
friend LENGTH< T, P > hypot( LENGTH< T, P > x, LENGTH< T, P > y )
{
return hypot( x.m_U, y.m_U );
LENGTH< T, P > z;
z.u = hypot( x.u, y.u );
return z;
}
friend double atan2( LENGTH< T, P > x, LENGTH< T, P > y )
{
return atan2( double ( x.m_U ), double( y.m_U ) );
return atan2( double ( x.u ), double( y.u ) );
}
};
/**
/*!
* Units of length
*
* How to use them:
@ -293,43 +349,61 @@ public:
* is going to use relative units.
*/
template < typename T = DEF_LENGTH_VALUE > class LENGTH_UNITS {
template < typename T > class LENGTH_UNITS {
protected:
enum
{
METRE = 1000000000, /* The ONLY constant connecting length to the real world */
METRE = 1000000000, /*!< The ONLY constant connecting length to the real world */
INCH = METRE / 10000 * 254
};
public:
static LENGTH< T, 1 > metre( void ) {
public:
/*! One metre. */
static LENGTH< T, 1 > metre( void )
{
return T( METRE );
}
static LENGTH< T, 1 > decimetre( void ) {
/*! One decimetre. */
static LENGTH< T, 1 > decimetre( void )
{
return T( METRE / 10 );
}
static LENGTH< T, 1 > centimetre( void ) {
static LENGTH< T, 1 > centimetre( void )
{
return T( METRE / 100 );
}
static LENGTH< T, 1 > millimetre( void ) {
static LENGTH< T, 1 > millimetre( void )
{
return T( METRE / 1000 );
}
static LENGTH< T, 1 > micrometre( void ) {
static LENGTH< T, 1 > micrometre( void )
{
return T( METRE / 1000000 );
}
static LENGTH< T, 1 > foot( void ) { /* do not think this will ever need */
static LENGTH< T, 1 > foot( void )
{
return T( INCH * 12 );
}
static LENGTH< T, 1 > inch( void ) {
static LENGTH< T, 1 > inch( void )
{
return T( INCH );
}
static LENGTH< T, 1 > mil( void ) {
static LENGTH< T, 1 > mil( void )
{
return T( INCH / 1000 );
}
};
/**
* shortcut to get units of given length type
* Shortcut to get units of given length type
*/
template < typename T, int D > class LENGTH_UNITS< LENGTH< T, D > >: public LENGTH_UNITS< T >
{

View File

@ -8,6 +8,7 @@
#ifdef KICAD_NANOMETRE
#include "length.h"
#include "limited_int.h"
/* switched type! */
typedef LENGTH< LIMITED_INT< int >, 1 > LENGTH_PCB;
@ -43,7 +44,6 @@ static LENGTH_PCB_DBL from_legacy_lu_dbl( double x ) {
#define ZERO_LENGTH ( LENGTH_PCB::zero() )
/* SAVE FILE macros */
#define FM_LENSV "%lf" ///< format specifier for saving
#define ARG_LENSV( x ) TO_LEGACY_LU_DBL( x ) ///< argument for saving
@ -63,6 +63,7 @@ typedef double LENGTH_PCB_DBL;
#define ZERO_LENGTH 0
/* SAVE FILE macros */
/** @TODO: after transition process this could be wrapped in some class */
#define FM_LENSV "%d"
@ -70,6 +71,7 @@ typedef double LENGTH_PCB_DBL;
#endif
/* LOAD FILE macros */
#define FM_LENLD "%lf" ///< scanf format macro for loading
#define ARG_LENLD_TYPE double ///< tmp variable for length read
@ -80,55 +82,7 @@ typedef double LENGTH_PCB_DBL;
#define LENGTH_LOAD_TMP( x ) ( FROM_LEGACY_LU( x ) ) ///< reads tmp value from above
#define LENGTH_LOAD_STR( s ) ( FROM_LEGACY_LU( atof( s ) ) ) ///< reads string
/// @TODO: nice template and refiling for it
struct VECTOR_PCB
{
LENGTH_PCB x, y;
VECTOR_PCB()
{
}
VECTOR_PCB( LENGTH_PCB ax, LENGTH_PCB ay ): x( ax ), y( ay )
{
}
bool operator == ( const VECTOR_PCB &a ) const {
return x == a.x && y == a.y;
}
bool operator != ( const VECTOR_PCB &a ) const {
return x != a.x || y != a.y;
}
VECTOR_PCB & operator = (const VECTOR_PCB &a ) {
x = a.x;
y = a.y;
return *this;
}
VECTOR_PCB & operator += (const VECTOR_PCB &a ) {
x += a.x;
y += a.y;
return *this;
}
VECTOR_PCB & operator -= (const VECTOR_PCB &a ) {
x -= a.x;
y -= a.y;
return *this;
}
VECTOR_PCB operator + (VECTOR_PCB add) const {
return VECTOR_PCB(x + add.x, y + add.y);
}
VECTOR_PCB operator - (VECTOR_PCB add) const {
return VECTOR_PCB(x - add.x, y - add.y);
}
VECTOR_PCB operator * (int factor) const {
return VECTOR_PCB(x * factor, y * factor);
}
VECTOR_PCB operator / (int factor) const {
return VECTOR_PCB(x / factor, y / factor);
}
};
#define TO_LEGACY_LU_WXP( p ) ( wxPoint( TO_LEGACY_LU( ( p ).x ), TO_LEGACY_LU( ( p ).y ) ) )
#define TO_LEGACY_LU_WXS( p ) ( wxSize( TO_LEGACY_LU( ( p ).x ), TO_LEGACY_LU( ( p ).y ) ) )
#define FROM_LEGACY_LU_VEC( p ) ( VECTOR_PCB( FROM_LEGACY_LU( ( p ).x ), FROM_LEGACY_LU( ( p ).y ) ) )
/* used fo loading/saving config */
#define LENGTH_MAX_CONFIG ( FROM_LEGACY_LU( 393700 ) )
#endif /* def LENGTHPCB_H_INCLUDED */

View File

@ -15,21 +15,25 @@
template < typename T = int > class LIMITED_INT {
private:
T m_Value;
public:
LIMITED_INT( void ) : m_Value() {
}
template<typename V> LIMITED_INT( const LIMITED_INT< V >& orig )
: m_Value( orig.m_Value )
{
assert(std::numeric_limits<T>::min() <= orig.m_Value);
assert(orig.m_Value <= std::numeric_limits<T>::max());
}
template<typename V> LIMITED_INT( const double v )
: m_Value( floor(v+0.5) )
{
assert(std::numeric_limits<T>::min() <= v);
assert(v <= std::numeric_limits<T>::max());
}
LIMITED_INT( T v ): m_Value( v )
{
}
@ -38,6 +42,7 @@ public:
{
return m_Value;
}
operator double( void ) const
{
return ( double )m_Value;
@ -48,11 +53,13 @@ public:
m_Value = src.m_Value;
return *this;
}
LIMITED_INT<T> & operator = ( T src )
{
m_Value = src;
return *this;
}
/*************************/
/* comparisons and tests */
/*************************/
@ -64,10 +71,12 @@ public:
{
return m_Value == y.m_Value;
}
bool operator == ( const T y ) const
{
return m_Value == y;
}
friend bool operator == ( const T x, const LIMITED_INT< T > &y )
{
return x == y.m_Value;
@ -77,10 +86,12 @@ public:
{
return m_Value != y.m_Value;
}
bool operator != ( const T y ) const
{
return m_Value != y;
}
friend bool operator != ( const T x, const LIMITED_INT< T > &y )
{
return x != y.m_Value;
@ -90,10 +101,12 @@ public:
{
return m_Value < y.m_Value;
}
bool operator < ( const T y ) const
{
return m_Value < y;
}
friend bool operator < ( const T x, const LIMITED_INT< T > &y )
{
return x < y.m_Value;
@ -103,10 +116,12 @@ public:
{
return m_Value >= y.m_Value;
}
bool operator >= ( const T y ) const
{
return m_Value >= y;
}
friend bool operator >= ( const T x, const LIMITED_INT<T> &y )
{
return x >= y.m_Value;
@ -116,10 +131,12 @@ public:
{
return m_Value > y.m_Value;
}
bool operator > ( const T y ) const
{
return m_Value > y;
}
friend bool operator > ( const T x, const LIMITED_INT< T > &y )
{
return x > y.m_Value;
@ -129,10 +146,12 @@ public:
{
return m_Value <= y.m_Value;
}
bool operator <= ( const T y ) const
{
return m_Value <= y;
}
friend bool operator <= ( const T x, const LIMITED_INT< T > &y )
{
return x <= y.m_Value;
@ -147,18 +166,22 @@ public:
assert( !( m_Value < 0 ) || std::numeric_limits< T >::min() - m_Value <= y.m_Value );
return m_Value + y.m_Value;
}
LIMITED_INT< T > operator + ( const T y ) const
{
return *this + LIMITED_INT< T >( y );
}
friend LIMITED_INT< T > operator + ( const T x, const LIMITED_INT< T > &y )
{
return LIMITED_INT< T >( x ) + y;
}
double operator + ( const double y ) const
{
return double( m_Value ) + y;
}
friend double operator + ( const double x, const LIMITED_INT< T > &y )
{
return x + double( y.m_Value );
@ -169,24 +192,29 @@ public:
assert( -std::numeric_limits< T >::max() <= m_Value );
return -m_Value;
}
LIMITED_INT< T > operator - ( const LIMITED_INT< T > &y ) const
{
assert( !( 0 < m_Value ) || m_Value - std::numeric_limits< T >::max() <= y.m_Value );
assert( !( m_Value < 0 ) || y.m_Value <= m_Value - std::numeric_limits< T >::min() );
return m_Value - y.m_Value;
}
LIMITED_INT< T > operator - ( const T y ) const
{
return *this - LIMITED_INT< T >( y );
}
friend LIMITED_INT< T > operator - ( const T x, const LIMITED_INT< T > &y )
{
return LIMITED_INT< T >( x ) - y;
}
double operator - ( const double y ) const
{
return double( m_Value ) - y;
}
friend double operator - ( const double x, const LIMITED_INT< T > &y )
{
return x - double( y.m_Value );
@ -204,18 +232,22 @@ public:
|| std::numeric_limits<T>::max() / m_Value <= y.m_Value );
return m_Value * y.m_Value;
}
LIMITED_INT<T> operator * ( const T y) const
{
return *this * LIMITED_INT< T >( y );
}
friend LIMITED_INT< T > operator *( const T x, const LIMITED_INT< T > &y )
{
return LIMITED_INT< T >( x ) * y;
}
double operator * ( const double y ) const
{
return double( m_Value ) * y;
}
friend double operator * ( const double x, const LIMITED_INT< T > &y )
{
return x * double( y.m_Value );
@ -227,18 +259,22 @@ public:
|| -std::numeric_limits< T >::max() <= m_Value );
return m_Value / y.m_Value;
}
LIMITED_INT<T> operator / ( const T y ) const
{
return *this / LIMITED_INT<T>(y);
}
friend LIMITED_INT< T > operator / ( const T x, const LIMITED_INT< T > &y )
{
return LIMITED_INT< T >( x ) / y;
}
double operator / ( const double y ) const
{
return double( m_Value ) / y;
}
friend double operator / ( const double x, const LIMITED_INT< T > &y )
{
return x / double( y.m_Value );
@ -248,62 +284,71 @@ public:
{
return m_Value % y.m_Value;
}
LIMITED_INT<T> operator % ( const T y ) const
{
return *this % LIMITED_INT<T>(y);
}
friend LIMITED_INT< T > operator % ( const T x, const LIMITED_INT< T > &y )
{
return LIMITED_INT< T >( x ) % y;
}
/*************************/
/* assignment arithmetic */
/*************************/
LIMITED_INT< T >& operator += ( const LIMITED_INT< T > &y )
{
*this = *this + y;
return *this;
}
LIMITED_INT< T >& operator += ( const T y )
{
*this = *this + y;
return *this;
}
LIMITED_INT< T >& operator ++ ( void )
{
*this = *this + 1;
return *this;
}
LIMITED_INT< T >& operator -= ( const LIMITED_INT< T > &y )
{
*this = *this - y;
return *this;
}
LIMITED_INT< T >& operator -= ( const T y )
{
*this = *this - y;
return *this;
}
LIMITED_INT< T >& operator -- ( void )
{
*this = *this - 1;
return *this;
}
LIMITED_INT< T >& operator *= ( const LIMITED_INT< T > &y )
{
*this = *this * y;
return *this;
}
LIMITED_INT< T >& operator *= ( const T y )
{
*this = *this * y;
return *this;
}
LIMITED_INT< T >& operator /= ( const LIMITED_INT< T > &y )
{
*this = *this / y;
return *this;
}
LIMITED_INT< T >& operator /= ( const T y )
{
*this = *this / y;

View File

@ -10,6 +10,7 @@
#include "wx/fileconf.h"
#include <boost/ptr_container/ptr_vector.hpp>
#include "lengthpcb.h"
/** Type of parameter in the configuration file */
enum paramcfg_id {
@ -85,6 +86,35 @@ public: PARAM_CFG_INT( const wxChar* ident, int* ptparam,
virtual void SaveParam( wxConfigBase* aConfig );
};
/**
* Configuration parameter - Length PCB Class
*
*/
class PARAM_CFG_LENGTH_PCB : public PARAM_CFG_BASE
{
public:
LENGTH_PCB * m_Pt_param; ///< Pointer to the parameter value
LENGTH_PCB m_Min, m_Max; ///< Minimum and maximum values of the param type
LENGTH_PCB m_Default; ///< The default value of the parameter
public:
PARAM_CFG_LENGTH_PCB( const wxChar* ident, /// @TODO: remove hardcoded constants
LENGTH_PCB* ptparam,
LENGTH_PCB default_val = ZERO_LENGTH,
LENGTH_PCB min = -LENGTH_MAX_CONFIG,
LENGTH_PCB max = LENGTH_MAX_CONFIG,
const wxChar* group = NULL );
PARAM_CFG_LENGTH_PCB( bool Insetup,
const wxChar* ident,
LENGTH_PCB* ptparam,
LENGTH_PCB default_val = ZERO_LENGTH,
LENGTH_PCB min = -LENGTH_MAX_CONFIG,
LENGTH_PCB max = LENGTH_MAX_CONFIG,
const wxChar* group = NULL );
virtual void ReadParam( wxConfigBase* aConfig );
virtual void SaveParam( wxConfigBase* aConfig );
};
/**
* Configuration parameter - SetColor Class

131
include/vectorpcb.h Normal file
View File

@ -0,0 +1,131 @@
/**
* @file vectorpcb.h
* @brief Planar vector definitions for PCBNEW.
*/
#ifndef VECTORPCB_H_INCLUDED
#define VECTORPCB_H_INCLUDED 1
/// @TODO: nice template and refiling for it
class VECTOR_PCB
{
public:
LENGTH_PCB data[2];
/** A vector from pair of coords. Constructor is avoided in favor to POD-like object.
*/
static VECTOR_PCB fromXY( LENGTH_PCB x, LENGTH_PCB y )
{
VECTOR_PCB z = { { x, y } };
return z;
}
LENGTH_PCB &operator[]( int i )
{
return data[i];
}
const LENGTH_PCB &operator[]( int i ) const
{
return data[i];
}
LENGTH_PCB & x()
{
return data[0];
}
const LENGTH_PCB & x() const
{
return data[0];
}
LENGTH_PCB & y()
{
return data[1];
}
const LENGTH_PCB & y() const
{
return data[1];
}
//LENGTH_PCB x, y;
bool operator == ( const VECTOR_PCB &b ) const
{
return data[0] == b.data[0] && data[1] == b.data[1];
}
bool operator != ( const VECTOR_PCB &b ) const
{
return !(*this == b);
}
VECTOR_PCB & operator -= ( const VECTOR_PCB &b )
{
data[0] -= b.data[0];
data[1] -= b.data[1];
return *this;
}
VECTOR_PCB operator - ( const VECTOR_PCB &b ) const
{
VECTOR_PCB z = *this;
z -= b;
return z;
}
VECTOR_PCB & operator += ( const VECTOR_PCB &b )
{
data[0] += b.data[0];
data[1] += b.data[1];
return *this;
}
VECTOR_PCB operator + ( VECTOR_PCB b ) const
{
VECTOR_PCB z = *this;
z += b;
return z;
}
VECTOR_PCB & operator *= ( int b )
{
data[0] *= b;
data[1] *= b;
return *this;
}
VECTOR_PCB operator * ( int b ) const
{
VECTOR_PCB z = *this;
z *= b;
return z;
}
VECTOR_PCB & operator /= ( int b )
{
data[0] /= b;
data[1] /= b;
return *this;
}
VECTOR_PCB operator / ( int b ) const
{
VECTOR_PCB z = *this;
z /= b;
return z;
}
};
#define TO_LEGACY_LU_WXP( p ) ( wxPoint( \
TO_LEGACY_LU( ( p )[0] ), \
TO_LEGACY_LU( ( p )[1] ) ) )
#define TO_LEGACY_LU_WXS( p ) ( wxSize( \
TO_LEGACY_LU( ( p )[0] ), \
TO_LEGACY_LU( ( p )[1] ) ) )
#define FROM_LEGACY_LU_VEC( p ) ( VECTOR_PCB::fromXY( \
FROM_LEGACY_LU( ( p ).x ), \
FROM_LEGACY_LU( ( p ).y ) ) )
#endif /* def VECTORPCB_H_INCLUDED */

View File

@ -550,9 +550,9 @@ void MirrorMarkedItems( MODULE* module, wxPoint offset )
continue;
SETMIRROR( pad->GetPosition().x );
pad->m_Pos0.x = FROM_LEGACY_LU( pad->GetPosition().x );
NEGATE( pad->m_Offset.x );
NEGATE( pad->m_DeltaSize.x );
pad->m_Pos0.x() = FROM_LEGACY_LU( pad->GetPosition().x );
NEGATE( pad->m_Offset.x() );
NEGATE( pad->m_DeltaSize.x() );
pad->m_Orient = 1800 - pad->m_Orient;
NORMALIZE_ANGLE_POS( pad->m_Orient );
}
@ -608,8 +608,9 @@ void RotateMarkedItems( MODULE* module, wxPoint offset )
{
if( pad->m_Selected == 0 )
continue;
ROTATE( pad->GetPosition() );
wxPoint pos = pad->GetPosition();
ROTATE( pos );
pad->SetPosition( pos );
pad->m_Pos0 = FROM_LEGACY_LU_VEC( pad->GetPosition() );
pad->m_Orient += 900;
NORMALIZE_ANGLE_POS( pad->m_Orient );
@ -632,7 +633,11 @@ void RotateMarkedItems( MODULE* module, wxPoint offset )
break;
case PCB_MODULE_TEXT_T:
ROTATE( ( (TEXTE_MODULE*) item )->GetPosition() );
{
wxPoint pos = ( (TEXTE_MODULE*) item )->m_Pos;
ROTATE( pos );
( (TEXTE_MODULE*) item )->m_Pos = pos;
}
( (TEXTE_MODULE*) item )->m_Pos0 = ( (TEXTE_MODULE*) item )->GetPosition();
( (TEXTE_MODULE*) item )->m_Orient += 900;
break;

View File

@ -328,8 +328,8 @@ void D_PAD:: TransformShapeWithClearanceToPolygon( std:: vector < CPolyPt>& aCor
{
wxPoint corner_position;
int ii, angle;
int dx = TO_LEGACY_LU( m_Size.x / 2 ) + aClearanceValue;
int dy = TO_LEGACY_LU( m_Size.y / 2 ) + aClearanceValue;
int dx = TO_LEGACY_LU( m_Size.x() / 2 ) + aClearanceValue;
int dy = TO_LEGACY_LU( m_Size.y() / 2 ) + aClearanceValue;
int delta = 3600 / aCircleToSegmentsCount; // rot angle in 0.1 degree
wxPoint PadShapePos = ReturnShapePos(); /* Note: for pad having a shape offset,
@ -437,8 +437,8 @@ void D_PAD:: TransformShapeWithClearanceToPolygon( std:: vector < CPolyPt>& aCor
default:
case PAD_TRAPEZOID:
psize.x += TO_LEGACY_LU( ABS( m_DeltaSize.y ) );
psize.y += TO_LEGACY_LU( ABS( m_DeltaSize.x ) );
psize.x += TO_LEGACY_LU( abs( m_DeltaSize.y() ) );
psize.y += TO_LEGACY_LU( abs( m_DeltaSize.x() ) );
// fall through
case PAD_RECT:
@ -572,8 +572,8 @@ void CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
wxPoint PadShapePos = aPad.ReturnShapePos(); /* Note: for pad having a shape offset,
* the pad position is NOT the shape position */
wxSize copper_thickness;
int dx = TO_LEGACY_LU( aPad.m_Size.x / 2 );
int dy = TO_LEGACY_LU( aPad.m_Size.y / 2 );
int dx = TO_LEGACY_LU( aPad.m_Size.x() / 2 );
int dy = TO_LEGACY_LU( aPad.m_Size.y() / 2 );
int delta = 3600 / aCircleToSegmentsCount; // rot angle in 0.1 degree
@ -684,8 +684,8 @@ void CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
// Oval pad support along the lines of round and rectangular pads
std::vector <wxPoint> corners_buffer; // Polygon buffer as vector
int dx = TO_LEGACY_LU( aPad.m_Size.x / 2 ) + aThermalGap; // Cutout radius x
int dy = TO_LEGACY_LU( aPad.m_Size.y / 2 ) + aThermalGap; // Cutout radius y
int dx = TO_LEGACY_LU( aPad.m_Size.x() / 2 ) + aThermalGap; // Cutout radius x
int dy = TO_LEGACY_LU( aPad.m_Size.y() / 2 ) + aThermalGap; // Cutout radius y
wxPoint shape_offset;
@ -839,8 +839,8 @@ void CreateThermalReliefPadPolygon( std::vector<CPolyPt>& aCornerBuffer,
std::vector <wxPoint> corners_buffer; // Polygon buffer as vector
int dx = TO_LEGACY_LU( aPad.m_Size.x / 2 ) + aThermalGap; // Cutout radius x
int dy = TO_LEGACY_LU( aPad.m_Size.y / 2 ) + aThermalGap; // Cutout radius y
int dx = TO_LEGACY_LU( aPad.m_Size.x() / 2 ) + aThermalGap; // Cutout radius x
int dy = TO_LEGACY_LU( aPad.m_Size.y() / 2 ) + aThermalGap; // Cutout radius y
// The first point of polygon buffer is left lower corner, second the crosspoint of
// thermal spoke sides, the third is upper right corner and the rest are rounding

View File

@ -647,11 +647,9 @@ bool BOARD::IsModuleLayerVisible( int layer )
wxPoint& BOARD::GetPosition()
wxPoint BOARD::GetPosition() const
{
static wxPoint dummy( 0, 0 );
return dummy; // a reference
return wxPoint ( 0, 0 ); // a reference
}
@ -1668,7 +1666,7 @@ D_PAD* BOARD::GetPadFast( const wxPoint& aPosition, int aLayerMask )
{
D_PAD* pad = m_NetInfo->GetPad(i);
if( pad->m_Pos != aPosition )
if( TO_LEGACY_LU_WXP( pad->m_Pos ) != aPosition )
continue;
/* Pad found, it must be on the correct layer */
@ -1699,7 +1697,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
D_PAD* pad = aPadList[idx];
if( pad->m_Pos == aPosition ) // candidate found
if( TO_LEGACY_LU_WXP( pad->m_Pos ) == aPosition ) // candidate found
{
// The pad must match the layer mask:
if( (aLayerMask & pad->m_layerMask) != 0 )
@ -1712,7 +1710,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
for( int ii = idx+1; ii <= idxmax; ii++ )
{
pad = aPadList[ii];
if( pad->m_Pos != aPosition )
if( TO_LEGACY_LU_WXP( pad->m_Pos ) != aPosition )
break;
if( (aLayerMask & pad->m_layerMask) != 0 )
return pad;
@ -1721,7 +1719,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
for( int ii = idx-1 ;ii >=0; ii-- )
{
pad = aPadList[ii];
if( pad->m_Pos != aPosition )
if( TO_LEGACY_LU_WXP( pad->m_Pos ) != aPosition )
break;
if( (aLayerMask & pad->m_layerMask) != 0 )
return pad;
@ -1731,9 +1729,9 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
return 0;
}
if( pad->m_Pos.x == aPosition.x ) // Must search considering Y coordinate
if( TO_LEGACY_LU( pad->m_Pos.x() ) == aPosition.x ) // Must search considering Y coordinate
{
if(pad->m_Pos.y < aPosition.y) // Must search after this item
if( TO_LEGACY_LU( pad->m_Pos.y() ) < aPosition.y ) // Must search after this item
{
idx += delta;
if( idx > idxmax )
@ -1746,7 +1744,7 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
idx = 0;
}
}
else if( pad->m_Pos.x < aPosition.x ) // Must search after this item
else if( TO_LEGACY_LU( pad->m_Pos.x() ) < aPosition.x ) // Must search after this item
{
idx += delta;
if( idx > idxmax )
@ -1770,9 +1768,9 @@ D_PAD* BOARD::GetPad( std::vector<D_PAD*>& aPadList, const wxPoint& aPosition, i
*/
static bool sortPadsByXthenYCoord( D_PAD* const & ref, D_PAD* const & comp )
{
if( ref->m_Pos.x == comp->m_Pos.x )
return ref->m_Pos.y < comp->m_Pos.y;
return ref->m_Pos.x < comp->m_Pos.x;
if( ref->m_Pos.x() == comp->m_Pos.x() )
return ref->m_Pos.y() < comp->m_Pos.y();
return ref->m_Pos.x() < comp->m_Pos.x();
}

View File

@ -226,7 +226,7 @@ public:
* is a dummy.
* @return const wxPoint& of (0,0)
*/
wxPoint& GetPosition();
wxPoint GetPosition() const;
/**
* Function Add

View File

@ -37,7 +37,7 @@ public:
DIMENSION( BOARD_ITEM* aParent );
~DIMENSION();
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return m_Pos;
}

View File

@ -46,7 +46,7 @@ public:
* Required by pure virtual BOARD_ITEM::GetPosition()
* @return const wxPoint& - The position of this object.
*/
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return m_Start;
}

View File

@ -81,7 +81,7 @@ public:
* Function GetPosition
* returns the position of this MARKER_PCB.
*/
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return (wxPoint&) m_Pos;
}

View File

@ -30,7 +30,7 @@ public:
PCB_TARGET* Next() const { return (PCB_TARGET*) Pnext; }
PCB_TARGET* Back() const { return (PCB_TARGET*) Pnext; }
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return m_Pos;
}

View File

@ -534,9 +534,11 @@ int MODULE::ReadDescr( LINE_READER* aReader )
{
D_PAD* pad = new D_PAD( this );
pad->ReadDescr( aReader );
RotatePoint( &pad->m_Pos, m_Orient );
pad->m_Pos.x += m_Pos.x;
pad->m_Pos.y += m_Pos.y;
wxPoint pos = TO_LEGACY_LU_WXP( pad->m_Pos );
RotatePoint( &pos, m_Orient );
pad->m_Pos = FROM_LEGACY_LU_VEC( pos );
pad->m_Pos.x() += FROM_LEGACY_LU( m_Pos.x );
pad->m_Pos.y() += FROM_LEGACY_LU( m_Pos.y );
m_Pads.PushBack( pad );
continue;

View File

@ -135,9 +135,9 @@ public:
* Function GetPosition
* returns the position of this object.
* Required by pure virtual BOARD_ITEM::GetPosition()
* @return const wxPoint& - The position of this object.
* @return const wxPoint - The position of this object.
*/
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return m_Pos;
}

View File

@ -183,12 +183,12 @@ void MODULE::Flip(const wxPoint& aCentre )
for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
{
pt_pad->m_Pos.y -= m_Pos.y;
pt_pad->m_Pos.y = -pt_pad->m_Pos.y;
pt_pad->m_Pos.y += m_Pos.y;
NEGATE( pt_pad->m_Pos0.y );
NEGATE( pt_pad->m_Offset.y );
NEGATE( pt_pad->m_DeltaSize.y );
pt_pad->m_Pos.y() -= FROM_LEGACY_LU( m_Pos.y );
pt_pad->m_Pos.y() = -pt_pad->m_Pos.y();
pt_pad->m_Pos.y() += FROM_LEGACY_LU( m_Pos.y );
NEGATE( pt_pad->m_Pos0.y() );
NEGATE( pt_pad->m_Offset.y() );
NEGATE( pt_pad->m_DeltaSize.y() );
NEGATE_AND_NORMALIZE_ANGLE_POS( pt_pad->m_Orient );
/* flip pads layers*/
@ -308,7 +308,7 @@ void MODULE::SetPosition( const wxPoint& newpos )
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
{
pad->m_Pos += delta;
pad->m_Pos += FROM_LEGACY_LU_VEC( delta );
}
EDA_ITEM* PtStruct = m_Drawings;
@ -352,15 +352,15 @@ void MODULE::SetOrientation( int newangle )
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
{
px = TO_LEGACY_LU( pad->m_Pos0.x );
py = TO_LEGACY_LU( pad->m_Pos0.y );
px = TO_LEGACY_LU( pad->m_Pos0.x() );
py = TO_LEGACY_LU( pad->m_Pos0.y() );
pad->m_Orient += newangle; /* change m_Orientation */
NORMALIZE_ANGLE_POS( pad->m_Orient );
RotatePoint( &px, &py, m_Orient );
pad->m_Pos.x = m_Pos.x + px;
pad->m_Pos.y = m_Pos.y + py;
pad->m_Pos.x() = FROM_LEGACY_LU( m_Pos.x + px );
pad->m_Pos.y() = FROM_LEGACY_LU( m_Pos.y + py );
}
/* Update of the reference and value. */

View File

@ -224,6 +224,6 @@ void RATSNEST_ITEM::Draw( EDA_DRAW_PANEL* panel,
{
GRSetDrawMode( DC, aDrawMode );
int color = g_ColorsSettings.GetItemColor(RATSNEST_VISIBLE);
GRLine( &panel->m_ClipBox, DC, m_PadStart->m_Pos - aOffset,
m_PadEnd->m_Pos - aOffset, 0, color );
GRLine( &panel->m_ClipBox, DC, TO_LEGACY_LU_WXP( m_PadStart->m_Pos ) - aOffset,
TO_LEGACY_LU_WXP( m_PadEnd->m_Pos ) - aOffset, 0, color );
}

View File

@ -27,14 +27,14 @@ D_PAD::D_PAD( MODULE* parent ) : BOARD_CONNECTED_ITEM( parent, PCB_PAD_T )
{
m_NumPadName = 0;
m_Size.x = m_Size.y = FROM_LEGACY_LU( 500 ); // give it a reasonable size
m_Size[0] = m_Size[1] = FROM_LEGACY_LU( 500 ); // give it a reasonable size
/// TODO: remove hardcoded constant
m_Orient = 0; // Pad rotation in 1/10 degrees
m_LengthDie = ZERO_LENGTH;
if( m_Parent && (m_Parent->Type() == PCB_MODULE_T) )
{
m_Pos = ( (MODULE*) m_Parent )->GetPosition();
m_Pos = FROM_LEGACY_LU_VEC( ( (MODULE*) m_Parent )->GetPosition() );
}
m_PadShape = PAD_CIRCLE; // Shape: PAD_CIRCLE, PAD_RECT PAD_OVAL
@ -68,23 +68,23 @@ int D_PAD::GetMaxRadius() const
switch( m_PadShape & 0x7F )
{
case PAD_CIRCLE:
radius = TO_LEGACY_LU( m_Size.x / 2 );
radius = TO_LEGACY_LU( m_Size.x() / 2 );
break;
case PAD_OVAL:
radius = TO_LEGACY_LU( MAX( m_Size.x, m_Size.y ) / 2 );
radius = TO_LEGACY_LU( max( m_Size.x(), m_Size.y() ) / 2 );
break;
case PAD_RECT:
x = TO_LEGACY_LU( m_Size.x );
y = TO_LEGACY_LU( m_Size.y );
x = TO_LEGACY_LU( m_Size.x() );
y = TO_LEGACY_LU( m_Size.y() );
radius = 1 + (int) ( sqrt( (double) y * y
+ (double) x * x ) / 2 );
break;
case PAD_TRAPEZOID:
x = TO_LEGACY_LU( m_Size.x + ABS( m_DeltaSize.y ) ); // Remember: m_DeltaSize.y is the m_Size.x change
y = TO_LEGACY_LU( m_Size.y + ABS( m_DeltaSize.x ) ); // Remember: m_DeltaSize.x is the m_Size.y change
x = TO_LEGACY_LU( m_Size.x() + abs( m_DeltaSize.y() ) ); // Remember: m_DeltaSize.y is the m_Size.x change
y = TO_LEGACY_LU( m_Size.y() + abs( m_DeltaSize.x() ) ); // Remember: m_DeltaSize.x is the m_Size.y change
radius = 1 + (int) ( sqrt( (double) y * y + (double) x * x ) / 2 );
break;
@ -114,7 +114,7 @@ EDA_RECT D_PAD::GetBoundingBox() const
EDA_RECT area;
int radius = GetMaxRadius(); // Calculate the radius of the area, considered as a circle
area.SetOrigin( m_Pos );
area.SetOrigin( TO_LEGACY_LU_WXP( m_Pos ) );
area.Inflate( radius );
return area;
@ -124,19 +124,19 @@ EDA_RECT D_PAD::GetBoundingBox() const
// Returns the position of the pad.
const wxPoint D_PAD::ReturnShapePos()
{
if( m_Offset.x == ZERO_LENGTH && m_Offset.y == ZERO_LENGTH )
return m_Pos;
if( m_Offset[0] == ZERO_LENGTH && m_Offset[0] == ZERO_LENGTH )
return TO_LEGACY_LU_WXP( m_Pos );
wxPoint shape_pos;
int dX, dY;
dX = TO_LEGACY_LU( m_Offset.x );
dY = TO_LEGACY_LU( m_Offset.y );
dX = TO_LEGACY_LU( m_Offset[0] );
dY = TO_LEGACY_LU( m_Offset[1] );
RotatePoint( &dX, &dY, m_Orient );
shape_pos.x = m_Pos.x + dX;
shape_pos.y = m_Pos.y + dY;
shape_pos.x = TO_LEGACY_LU( m_Pos.x() ) + dX;
shape_pos.y = TO_LEGACY_LU( m_Pos.y() ) + dY;
return shape_pos;
}
@ -304,7 +304,7 @@ int D_PAD::GetSolderMaskMargin()
// ensure mask have a size always >= 0
if( margin < 0 )
{
int minsize = TO_LEGACY_LU( -MIN( m_Size.x, m_Size.y ) / 2 );
int minsize = TO_LEGACY_LU( -min( m_Size.x(), m_Size.y() ) / 2 );
if( margin < minsize )
minsize = minsize;
@ -349,15 +349,15 @@ wxSize D_PAD::GetSolderPasteMargin()
}
wxSize pad_margin;
pad_margin.x = margin + wxRound( TO_LEGACY_LU_DBL( m_Size.x ) * mratio );
pad_margin.y = margin + wxRound( TO_LEGACY_LU_DBL( m_Size.y ) * mratio );
pad_margin.x = margin + wxRound( TO_LEGACY_LU_DBL( m_Size.x() ) * mratio );
pad_margin.y = margin + wxRound( TO_LEGACY_LU_DBL( m_Size.y() ) * mratio );
// ensure mask have a size always >= 0
if( pad_margin.x < TO_LEGACY_LU( -m_Size.x / 2 ) )
pad_margin.x = TO_LEGACY_LU( -m_Size.x / 2 );
if( pad_margin.x < TO_LEGACY_LU( -m_Size.x() / 2 ) )
pad_margin.x = TO_LEGACY_LU( -m_Size.x() / 2 );
if( pad_margin.y < TO_LEGACY_LU( -m_Size.y / 2 ) )
pad_margin.y = TO_LEGACY_LU( -m_Size.y / 2 );
if( pad_margin.y < TO_LEGACY_LU( -m_Size.y() / 2 ) )
pad_margin.y = TO_LEGACY_LU( -m_Size.y() / 2 );
return pad_margin;
}
@ -426,10 +426,10 @@ int D_PAD::ReadDescr( LINE_READER* aReader )
BufCar, &sx, &sy,
&dx, &dy,
&m_Orient );
m_Size.x = LENGTH_LOAD_TMP( sx );
m_Size.y = LENGTH_LOAD_TMP( sy );
m_DeltaSize.x = LENGTH_LOAD_TMP( dx );
m_DeltaSize.y = LENGTH_LOAD_TMP( dy );
m_Size.x() = LENGTH_LOAD_TMP( sx );
m_Size.y() = LENGTH_LOAD_TMP( sy );
m_DeltaSize.x() = LENGTH_LOAD_TMP( dx );
m_DeltaSize.y() = LENGTH_LOAD_TMP( dy );
ll = 0xFF & BufCar[0];
/* Read pad shape */
@ -457,17 +457,17 @@ int D_PAD::ReadDescr( LINE_READER* aReader )
BufCar[0] = 0;
nn = sscanf( PtLine, FM_LENLD" "FM_LENLD" "FM_LENLD" %s "FM_LENLD" "FM_LENLD, &dr,
&ox, &oy, BufCar, &dx, &dy );
m_Offset.x = LENGTH_LOAD_TMP( ox );
m_Offset.y = LENGTH_LOAD_TMP( oy );
m_Drill.y = m_Drill.x = LENGTH_LOAD_TMP( dr );
m_Offset.x() = LENGTH_LOAD_TMP( ox );
m_Offset.y() = LENGTH_LOAD_TMP( oy );
m_Drill.y() = m_Drill.x() = LENGTH_LOAD_TMP( dr );
m_DrillShape = PAD_CIRCLE;
if( nn >= 6 ) // Drill shape = OVAL ?
{
if( BufCar[0] == 'O' )
{
m_Drill.x = FROM_LEGACY_LU( dx );
m_Drill.y = FROM_LEGACY_LU( dy );
m_Drill.x() = FROM_LEGACY_LU( dx );
m_Drill.y() = FROM_LEGACY_LU( dy );
m_DrillShape = PAD_OVAL;
}
}
@ -503,8 +503,8 @@ int D_PAD::ReadDescr( LINE_READER* aReader )
case 'P':
nn = sscanf( PtLine, FM_LENLD" "FM_LENLD, &ox, &oy );
m_Pos0 = VECTOR_PCB( LENGTH_LOAD_TMP( ox ), LENGTH_LOAD_TMP( oy ) );
m_Pos = TO_LEGACY_LU_WXP( m_Pos0 );
m_Pos0 = VECTOR_PCB::fromXY( LENGTH_LOAD_TMP( ox ), LENGTH_LOAD_TMP( oy ) );
m_Pos = m_Pos0;
break;
case 'L':
@ -563,14 +563,14 @@ bool D_PAD::Save( FILE* aFile ) const
}
fprintf( aFile, "Sh \"%.4s\" %c "FM_LENSV" "FM_LENSV" "FM_LENSV" "FM_LENSV" %d\n", // TODO: pad name length limit!
m_Padname, cshape, ARG_LENSV( m_Size.x ), ARG_LENSV( m_Size.y ),
ARG_LENSV( m_DeltaSize.x ), ARG_LENSV( m_DeltaSize.y ), m_Orient );
m_Padname, cshape, ARG_LENSV( m_Size.x() ), ARG_LENSV( m_Size.y() ),
ARG_LENSV( m_DeltaSize.x() ), ARG_LENSV( m_DeltaSize.y() ), m_Orient );
fprintf( aFile, "Dr "FM_LENSV" "FM_LENSV" "FM_LENSV, ARG_LENSV( m_Drill.x ), ARG_LENSV( m_Offset.x ), ARG_LENSV( m_Offset.y ) );
fprintf( aFile, "Dr "FM_LENSV" "FM_LENSV" "FM_LENSV, ARG_LENSV( m_Drill.x() ), ARG_LENSV( m_Offset.x() ), ARG_LENSV( m_Offset.y() ) );
if( m_DrillShape == PAD_OVAL )
{
fprintf( aFile, " %c "FM_LENSV" "FM_LENSV, 'O', ARG_LENSV( m_Drill.x ), ARG_LENSV( m_Drill.y ) );
fprintf( aFile, " %c "FM_LENSV" "FM_LENSV, 'O', ARG_LENSV( m_Drill.x() ), ARG_LENSV( m_Drill.y() ) );
}
fprintf( aFile, "\n" );
@ -599,7 +599,7 @@ bool D_PAD::Save( FILE* aFile ) const
fprintf( aFile, "Ne %d %s\n", GetNet(), EscapedUTF8( m_Netname ).c_str() );
fprintf( aFile, "Po "FM_LENSV" "FM_LENSV"\n", ARG_LENSV( m_Pos0.x ), ARG_LENSV( m_Pos0.y ) );
fprintf( aFile, "Po "FM_LENSV" "FM_LENSV"\n", ARG_LENSV( m_Pos0.x() ), ARG_LENSV( m_Pos0.y() ) );
if( m_LengthDie != ZERO_LENGTH )
fprintf( aFile, "Le "FM_LENSV"\n", ARG_LENSV( m_LengthDie ) );
@ -755,13 +755,13 @@ void D_PAD::DisplayInfo( EDA_DRAW_FRAME* frame )
frame->AppendMsgPanel( ShowPadShape(), ShowPadAttr(), DARKGREEN );
valeur_param( TO_LEGACY_LU( m_Size.x ), Line );
valeur_param( TO_LEGACY_LU( m_Size.x() ), Line );
frame->AppendMsgPanel( _( "H Size" ), Line, RED );
valeur_param( TO_LEGACY_LU( m_Size.y ), Line );
valeur_param( TO_LEGACY_LU( m_Size.y() ), Line );
frame->AppendMsgPanel( _( "V Size" ), Line, RED );
valeur_param( (unsigned)(int) TO_LEGACY_LU( m_Drill.x ), Line );
valeur_param( (unsigned)(int) TO_LEGACY_LU( m_Drill.x() ), Line );
if( m_DrillShape == PAD_CIRCLE )
{
@ -769,9 +769,9 @@ void D_PAD::DisplayInfo( EDA_DRAW_FRAME* frame )
}
else
{
valeur_param( (unsigned) TO_LEGACY_LU( m_Drill.x ), Line );
valeur_param( (unsigned) TO_LEGACY_LU( m_Drill.x() ), Line );
wxString msg;
valeur_param( (unsigned) TO_LEGACY_LU( m_Drill.y ), msg );
valeur_param( (unsigned) TO_LEGACY_LU( m_Drill.y() ), msg );
Line += wxT( " / " ) + msg;
frame->AppendMsgPanel( _( "Drill X / Y" ), Line, RED );
}
@ -787,10 +787,10 @@ void D_PAD::DisplayInfo( EDA_DRAW_FRAME* frame )
frame->AppendMsgPanel( _( "Orient" ), Line, LIGHTBLUE );
valeur_param( m_Pos.x, Line );
valeur_param( TO_LEGACY_LU( m_Pos.x() ), Line );
frame->AppendMsgPanel( _( "X Pos" ), Line, LIGHTBLUE );
valeur_param( m_Pos.y, Line );
valeur_param( TO_LEGACY_LU( m_Pos.y() ), Line );
frame->AppendMsgPanel( _( "Y pos" ), Line, LIGHTBLUE );
if( m_LengthDie != ZERO_LENGTH )
@ -827,8 +827,8 @@ bool D_PAD::HitTest( const wxPoint& refPos )
if( ( abs( delta.x ) > m_ShapeMaxRadius ) || ( abs( delta.y ) > m_ShapeMaxRadius ) )
return false;
dx = TO_LEGACY_LU( m_Size.x / 2 ); // dx also is the radius for rounded pads
dy = TO_LEGACY_LU( m_Size.y / 2 );
dx = TO_LEGACY_LU( m_Size.x() / 2 ); // dx also is the radius for rounded pads
dy = TO_LEGACY_LU( m_Size.y() / 2 );
switch( m_PadShape & 0x7F )
{
@ -868,22 +868,22 @@ int D_PAD::Compare( const D_PAD* padref, const D_PAD* padcmp )
if( ( diff = padref->m_PadShape - padcmp->m_PadShape) )
return diff;
if( ( diff = TO_LEGACY_LU( padref->m_Size.x - padcmp->m_Size.x ) ) )
if( ( diff = TO_LEGACY_LU( padref->m_Size.x() - padcmp->m_Size.x() ) ) )
return diff;
if( ( diff = TO_LEGACY_LU( padref->m_Size.y - padcmp->m_Size.y ) ) )
if( ( diff = TO_LEGACY_LU( padref->m_Size.y() - padcmp->m_Size.y() ) ) )
return diff;
if( ( diff = TO_LEGACY_LU( padref->m_Offset.x - padcmp->m_Offset.x ) ) )
if( ( diff = TO_LEGACY_LU( padref->m_Offset.x() - padcmp->m_Offset.x() ) ) )
return diff;
if( ( diff = TO_LEGACY_LU( padref->m_Offset.y - padcmp->m_Offset.y ) ) )
if( ( diff = TO_LEGACY_LU( padref->m_Offset.y() - padcmp->m_Offset.y() ) ) )
return diff;
if( ( diff = TO_LEGACY_LU( padref->m_DeltaSize.x - padcmp->m_DeltaSize.x ) ) )
if( ( diff = TO_LEGACY_LU( padref->m_DeltaSize.x() - padcmp->m_DeltaSize.x() ) ) )
return diff;
if( ( diff = TO_LEGACY_LU( padref->m_DeltaSize.y - padcmp->m_DeltaSize.y ) ) )
if( ( diff = TO_LEGACY_LU( padref->m_DeltaSize.y() - padcmp->m_DeltaSize.y() ) ) )
return diff;
// @todo check if export_gencad still works:

View File

@ -12,7 +12,7 @@
#include "PolyLine.h"
#include "lengthpcb.h"
#include "vectorpcb.h"
class LINE_READER;
class EDA_3D_CANVAS;
@ -72,8 +72,9 @@ private:
wxString m_ShortNetname; // short net name, like vout from /mysheet/mysubsheet/vout
public:
wxPoint m_Pos; // pad Position on board
public: /** TODO: that's not so good if parameters are easily modifiable outside
(e. g. m_Pos, which could be coherent with m_Pos and module orient/pos ) */
VECTOR_PCB m_Pos; // pad Position on board
union
{
@ -114,7 +115,7 @@ public:
VECTOR_PCB m_DeltaSize; // delta on rectangular shapes
VECTOR_PCB m_Pos0; // Initial Pad position (i.e. pas position relative to the
VECTOR_PCB m_Pos0; // Initial Pad position (i.e. pad position relative to the
// module anchor, orientation 0
int m_ShapeMaxRadius; // radius of the circle containing the pad shape
@ -177,16 +178,17 @@ public:
* Function GetPosition
* returns the position of this object.
* @return const wxPoint& - The position of this object.
* @TODO: could move virtual method to .c file
*/
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return m_Pos;
return TO_LEGACY_LU_WXP( m_Pos );
}
void SetPosition( const wxPoint& aPos )
{
m_Pos = aPos;
m_Pos = FROM_LEGACY_LU_VEC( aPos );
}
/**
@ -385,7 +387,7 @@ public:
*/
virtual void Move( const wxPoint& aMoveVector )
{
m_Pos += aMoveVector;
m_Pos += FROM_LEGACY_LU_VEC( aMoveVector );
}

View File

@ -475,8 +475,8 @@ void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
}
/* Draw the pad hole */
wxPoint holepos = m_Pos - aDrawInfo.m_Offset;
int hole = TO_LEGACY_LU( m_Drill.x ) / 2;
wxPoint holepos = TO_LEGACY_LU_WXP( m_Pos ) - aDrawInfo.m_Offset;
int hole = TO_LEGACY_LU( m_Drill.x() ) / 2;
bool drawhole = hole > 0;
@ -513,20 +513,20 @@ void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
break;
case PAD_OVAL:
halfsize.x = TO_LEGACY_LU( m_Drill.x ) / 2;
halfsize.y = TO_LEGACY_LU( m_Drill.y ) / 2;
halfsize.x = TO_LEGACY_LU( m_Drill.x() ) / 2;
halfsize.y = TO_LEGACY_LU( m_Drill.y() ) / 2;
if( m_Drill.x > m_Drill.y ) /* horizontal */
if( m_Drill.x() > m_Drill.y() ) /* horizontal */
{
delta_cx = halfsize.x - halfsize.y;
delta_cy = 0;
seg_width = TO_LEGACY_LU( m_Drill.y );
seg_width = TO_LEGACY_LU( m_Drill.y() );
}
else /* vertical */
{
delta_cx = 0;
delta_cy = halfsize.y - halfsize.x;
seg_width = TO_LEGACY_LU( m_Drill.x );
seg_width = TO_LEGACY_LU( m_Drill.x() );
}
RotatePoint( &delta_cx, &delta_cy, angle );
@ -578,11 +578,11 @@ void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
AreaSize = TO_LEGACY_LU_WXS( m_Size );
if( m_Size.y > m_Size.x )
if( m_Size.y() > m_Size.x() )
{
angle += 900;
AreaSize.x = TO_LEGACY_LU( m_Size.y );
AreaSize.y = TO_LEGACY_LU( m_Size.x );
AreaSize.x = TO_LEGACY_LU( m_Size.y() );
AreaSize.y = TO_LEGACY_LU( m_Size.x() );
}
if( shortname_len > 0 ) // if there is a netname, provides room to display this netname
@ -664,23 +664,23 @@ int D_PAD::BuildSegmentFromOvalShape(wxPoint& aSegStart, wxPoint& aSegEnd, int a
{
int width;
if( m_Size.y < m_Size.x ) // Build an horizontal equiv segment
if( m_Size.y() < m_Size.x() ) // Build an horizontal equiv segment
{
int delta = TO_LEGACY_LU( ( m_Size.x - m_Size.y ) / 2 );
int delta = TO_LEGACY_LU( ( m_Size.x() - m_Size.y() ) / 2 );
aSegStart.x = -delta;
aSegStart.y = 0;
aSegEnd.x = delta;
aSegEnd.y = 0;
width = TO_LEGACY_LU( m_Size.y );
width = TO_LEGACY_LU( m_Size.y() );
}
else // Vertical oval: build a vertical equiv segment
{
int delta = TO_LEGACY_LU( ( m_Size.y -m_Size.x ) / 2 );
int delta = TO_LEGACY_LU( ( m_Size.y() -m_Size.x() ) / 2 );
aSegStart.x = 0;
aSegStart.y = -delta;
aSegEnd.x = 0;
aSegEnd.y = delta;
width = TO_LEGACY_LU( m_Size.x );
width = TO_LEGACY_LU( m_Size.x() );
}
if( aRotation )
@ -701,8 +701,8 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
wxSize delta;
wxSize halfsize;
halfsize.x = TO_LEGACY_LU( m_Size.x / 2 );
halfsize.y = TO_LEGACY_LU( m_Size.y / 2 );
halfsize.x = TO_LEGACY_LU( m_Size.x() / 2 );
halfsize.y = TO_LEGACY_LU( m_Size.y() / 2 );
/* For rectangular shapes, inflate is easy
*/
@ -721,8 +721,8 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
else
{
// Trapezoidal pad: verify delta values
delta.x = TO_LEGACY_LU( m_DeltaSize.x / 2 );
delta.y = TO_LEGACY_LU( m_DeltaSize.y / 2 );
delta.x = TO_LEGACY_LU( m_DeltaSize.x() / 2 );
delta.y = TO_LEGACY_LU( m_DeltaSize.y() / 2 );
// be sure delta values are not to large
if( (delta.x < 0) && (delta.x <= -halfsize.y) )
@ -762,7 +762,7 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
if( delta.y ) // lower and upper segment is horizontal
{
// Calculate angle of left (or right) segment with vertical axis
angle = atan2( m_DeltaSize.y, m_Size.y ); /// TODO: make atan2 available to LENGTH
angle = atan2( m_DeltaSize.y(), m_Size.y() );
// left and right sides are moved by aInflateValue.x in their perpendicular direction
// We must calculate the corresponding displacement on the horizontal axis
@ -778,7 +778,7 @@ void D_PAD::BuildPadPolygon( wxPoint aCoord[4], wxSize aInflateValue, int aRotat
else if( delta.x ) // left and right segment is vertical
{
// Calculate angle of lower (or upper) segment with horizontal axis
angle = atan2( m_DeltaSize.x, m_Size.x );
angle = atan2( m_DeltaSize.x(), m_Size.x() );
// lower and upper sides are moved by aInflateValue.x in their perpendicular direction
// We must calculate the corresponding displacement on the vertical axis

View File

@ -26,7 +26,7 @@ public:
* returns the position of this object.
* @return wxPoint& - The position of this object, non-const so it can be changed
*/
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return m_Pos; // within EDA_TEXT
}

View File

@ -51,7 +51,7 @@ public:
* Required by pure virtual BOARD_ITEM::GetPosition()
* @return const wxPoint& - The position of this object.
*/
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return m_Pos;
}

View File

@ -122,7 +122,7 @@ public:
* returns the position of this object.
* @return const wxPoint& - The position of this object.
*/
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return m_Start; // it had to be start or end.
}
@ -470,7 +470,7 @@ public:
* returns the position of this object.
* @return const wxPoint& - The position of this object.
*/
wxPoint& GetPosition()
wxPoint GetPosition() const
{
return m_Start;
}

View File

@ -84,18 +84,9 @@ bool ZONE_CONTAINER::UnFill()
}
wxPoint& ZONE_CONTAINER::GetPosition()
wxPoint ZONE_CONTAINER::GetPosition() const
{
static wxPoint pos;
if( m_Poly )
{
pos = GetCornerPosition( 0 );
}
else
pos = wxPoint( 0, 0 );
return pos;
return m_Poly? GetCornerPosition( 0 ) : wxPoint( 0, 0 );
}

View File

@ -118,7 +118,7 @@ public:
* Function GetPosition
* @return a wxPoint, position of the first point of the outline
*/
wxPoint& GetPosition();
wxPoint GetPosition() const;
/**
* Function copy

View File

@ -850,7 +850,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
if( pad )
{
// test if the track start point is not exactly starting on the pad
if( segment->m_Start != pad->m_Pos )
if( segment->m_Start != TO_LEGACY_LU_WXP( pad->m_Pos ) )
{
if( segment->GetTrace( frame->GetBoard()->m_Track, NULL, START ) == NULL )
{
@ -858,7 +858,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
frame->GetBoard()->m_Track.Insert( newTrack, segment->Next() );
newTrack->m_End = pad->m_Pos;
newTrack->m_End = TO_LEGACY_LU_WXP( pad->m_Pos );
newTrack->start = segment;
newTrack->end = pad;
@ -872,7 +872,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
if( pad )
{
// test if the track end point is not exactly on the pad
if( segment->m_End != pad->m_Pos )
if( segment->m_End != TO_LEGACY_LU_WXP( pad->m_Pos ) )
{
if( segment->GetTrace( frame->GetBoard()->m_Track, NULL, END ) == NULL )
{
@ -880,7 +880,7 @@ void ConnectDanglingEndToPad( PCB_EDIT_FRAME* frame )
frame->GetBoard()->m_Track.Insert( newTrack, segment->Next() );
newTrack->m_Start = pad->m_Pos;
newTrack->m_Start = TO_LEGACY_LU_WXP( pad->m_Pos );
newTrack->start = pad;
newTrack->end = segment;

View File

@ -185,7 +185,7 @@ void DIALOG_GENDRILL::InitDisplayParams( void )
{
if( pad->m_DrillShape == PAD_CIRCLE )
{
if( pad->m_Drill.x != ZERO_LENGTH )
if( pad->m_Drill.x() != ZERO_LENGTH )
{
if( pad->m_Attribut == PAD_HOLE_NOT_PLATED )
m_notplatedPadsHoleCount++;
@ -195,7 +195,7 @@ void DIALOG_GENDRILL::InitDisplayParams( void )
}
else
{
if( MIN( TO_LEGACY_LU( pad->m_Drill.x ), TO_LEGACY_LU( pad->m_Drill.y ) ) != 0 )
if( min( TO_LEGACY_LU( pad->m_Drill.x() ), TO_LEGACY_LU( pad->m_Drill.y() ) ) != 0 )
{
if( pad->m_Attribut == PAD_HOLE_NOT_PLATED )
m_notplatedPadsHoleCount++;

View File

@ -117,7 +117,7 @@ void DIALOG_PAD_PROPERTIES::OnPaintShowPanel( wxPaintEvent& event )
drawInfo.m_Color = color;
drawInfo.m_HoleColor = DARKGRAY;
drawInfo.m_Offset = m_dummyPad->m_Pos;
drawInfo.m_Offset = TO_LEGACY_LU_WXP( m_dummyPad->m_Pos );
drawInfo.m_Display_padnum = true;
drawInfo.m_Display_netname = true;
if( m_dummyPad->m_Attribut == PAD_HOLE_NOT_PLATED )
@ -130,11 +130,11 @@ void DIALOG_PAD_PROPERTIES::OnPaintShowPanel( wxPaintEvent& event )
dc.SetDeviceOrigin( dc_size.x / 2, dc_size.y / 2 );
// Calculate a suitable scale to fit the available draw area
int dim = TO_LEGACY_LU( m_dummyPad->m_Size.x + ABS( m_dummyPad->m_DeltaSize.y ) );
int dim = TO_LEGACY_LU( m_dummyPad->m_Size.x() + abs( m_dummyPad->m_DeltaSize.y() ) );
if( m_dummyPad->m_LocalClearance > ZERO_LENGTH )
dim += TO_LEGACY_LU( m_dummyPad->m_LocalClearance * 2 );
double scale = (double) dc_size.x / dim;
dim = TO_LEGACY_LU( m_dummyPad->m_Size.y + ABS( m_dummyPad->m_DeltaSize.x ) );
dim = TO_LEGACY_LU( m_dummyPad->m_Size.y() + abs( m_dummyPad->m_DeltaSize.x() ) );
if( m_dummyPad->m_LocalClearance > ZERO_LENGTH )
dim += TO_LEGACY_LU( m_dummyPad->m_LocalClearance * 2 );
double altscale = (double) dc_size.y / dim;
@ -207,8 +207,8 @@ void DIALOG_PAD_PROPERTIES::initValues()
if( m_isFlipped )
{
NEGATE( m_dummyPad->m_Offset.y );
NEGATE( m_dummyPad->m_DeltaSize.y );
NEGATE( m_dummyPad->m_Offset.y() );
NEGATE( m_dummyPad->m_DeltaSize.y() );
/* flip pads layers*/
m_dummyPad->m_layerMask = ChangeSideMaskLayer( m_dummyPad->m_layerMask );
}
@ -236,26 +236,26 @@ void DIALOG_PAD_PROPERTIES::initValues()
m_SolderPasteMarginUnits->SetLabel( GetUnitsLabel( g_UserUnit ) );
// Display current pad parameters units:
PutValueInLocalUnits( *m_PadPosition_X_Ctrl, m_dummyPad->m_Pos.x, internalUnits );
PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, m_dummyPad->m_Pos.y, internalUnits );
CTR_PUT_LENGTH( *m_PadPosition_X_Ctrl, m_dummyPad->m_Pos.x(), internalUnits );
CTR_PUT_LENGTH( *m_PadPosition_Y_Ctrl, m_dummyPad->m_Pos.y(), internalUnits );
CTR_PUT_LENGTH( *m_PadDrill_X_Ctrl, m_dummyPad->m_Drill.x, internalUnits );
CTR_PUT_LENGTH( *m_PadDrill_Y_Ctrl, m_dummyPad->m_Drill.y, internalUnits );
CTR_PUT_LENGTH( *m_PadDrill_X_Ctrl, m_dummyPad->m_Drill.x(), internalUnits );
CTR_PUT_LENGTH( *m_PadDrill_Y_Ctrl, m_dummyPad->m_Drill.y(), internalUnits );
CTR_PUT_LENGTH( *m_ShapeSize_X_Ctrl, m_dummyPad->m_Size.x, internalUnits );
CTR_PUT_LENGTH( *m_ShapeSize_Y_Ctrl, m_dummyPad->m_Size.y, internalUnits );
CTR_PUT_LENGTH( *m_ShapeSize_X_Ctrl, m_dummyPad->m_Size.x(), internalUnits );
CTR_PUT_LENGTH( *m_ShapeSize_Y_Ctrl, m_dummyPad->m_Size.y(), internalUnits );
CTR_PUT_LENGTH( *m_ShapeOffset_X_Ctrl, m_dummyPad->m_Offset.x, internalUnits );
CTR_PUT_LENGTH( *m_ShapeOffset_Y_Ctrl, m_dummyPad->m_Offset.y, internalUnits );
CTR_PUT_LENGTH( *m_ShapeOffset_X_Ctrl, m_dummyPad->m_Offset.x(), internalUnits );
CTR_PUT_LENGTH( *m_ShapeOffset_Y_Ctrl, m_dummyPad->m_Offset.y(), internalUnits );
if( m_dummyPad->m_DeltaSize.x != ZERO_LENGTH )
if( m_dummyPad->m_DeltaSize.x() != ZERO_LENGTH )
{
CTR_PUT_LENGTH( *m_ShapeDelta_Ctrl, m_dummyPad->m_DeltaSize.x, internalUnits );
CTR_PUT_LENGTH( *m_ShapeDelta_Ctrl, m_dummyPad->m_DeltaSize.x(), internalUnits );
m_radioBtnDeltaXdir->SetValue(true);
}
else
{
CTR_PUT_LENGTH( *m_ShapeDelta_Ctrl, m_dummyPad->m_DeltaSize.y, internalUnits );
CTR_PUT_LENGTH( *m_ShapeDelta_Ctrl, m_dummyPad->m_DeltaSize.y(), internalUnits );
m_radioBtnDeltaYdir->SetValue(true);
}
@ -613,7 +613,7 @@ void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
/* compute the pos 0 value, i.e. pad position for module orient = 0 i.e.
* refer to module origin (module position) */
m_CurrentPad->m_Pos0 = FROM_LEGACY_LU_VEC( m_CurrentPad->m_Pos );
m_CurrentPad->m_Pos0 = m_CurrentPad->m_Pos;
m_CurrentPad->m_Pos0 -= FROM_LEGACY_LU_VEC( Module->m_Pos );
m_CurrentPad->m_Orient = (g_Pad_Master.m_Orient * isign) + Module->m_Orient;
wxPoint p = TO_LEGACY_LU_WXP( m_CurrentPad->m_Pos0 );
@ -621,12 +621,12 @@ void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
m_CurrentPad->m_Pos0 = FROM_LEGACY_LU_VEC( p );
m_CurrentPad->m_Size = g_Pad_Master.m_Size;
m_CurrentPad->m_DeltaSize = g_Pad_Master.m_DeltaSize;
m_CurrentPad->m_DeltaSize.y *= isign;
m_CurrentPad->m_Drill = g_Pad_Master.m_Drill;
m_CurrentPad->m_DrillShape = g_Pad_Master.m_DrillShape;
m_CurrentPad->m_Offset = g_Pad_Master.m_Offset;
m_CurrentPad->m_Offset.y *= isign;
m_CurrentPad->m_DeltaSize = g_Pad_Master.m_DeltaSize;
m_CurrentPad->m_DeltaSize.y() *= isign;
m_CurrentPad->m_Drill = g_Pad_Master.m_Drill;
m_CurrentPad->m_DrillShape = g_Pad_Master.m_DrillShape;
m_CurrentPad->m_Offset = g_Pad_Master.m_Offset;
m_CurrentPad->m_Offset.y() *= isign;
m_CurrentPad->m_LengthDie = g_Pad_Master.m_LengthDie;
@ -711,26 +711,26 @@ bool DIALOG_PAD_PROPERTIES::TransfertDataToPad( D_PAD* aPad, bool aPromptOnError
aPad->m_LocalSolderPasteMarginRatio = dtmp / 100;
// Read pad position:
aPad->m_Pos.x = ReturnValueFromTextCtrl( *m_PadPosition_X_Ctrl, internalUnits );
aPad->m_Pos.y = ReturnValueFromTextCtrl( *m_PadPosition_Y_Ctrl, internalUnits );
aPad->m_Pos0 = FROM_LEGACY_LU_VEC( aPad->m_Pos );
aPad->m_Pos.x() = CTR_GET_LENGTH( *m_PadPosition_X_Ctrl, internalUnits );
aPad->m_Pos.y() = CTR_GET_LENGTH( *m_PadPosition_Y_Ctrl, internalUnits );
aPad->m_Pos0 = aPad->m_Pos;
// Read pad drill:
aPad->m_Drill.x = CTR_GET_LENGTH( *m_PadDrill_X_Ctrl, internalUnits );
aPad->m_Drill.y = CTR_GET_LENGTH( *m_PadDrill_Y_Ctrl, internalUnits );
aPad->m_Drill.x() = CTR_GET_LENGTH( *m_PadDrill_X_Ctrl, internalUnits );
aPad->m_Drill.y() = CTR_GET_LENGTH( *m_PadDrill_Y_Ctrl, internalUnits );
if( m_DrillShapeCtrl->GetSelection() == 0 )
{
aPad->m_DrillShape = PAD_CIRCLE;
aPad->m_Drill.y = aPad->m_Drill.x;
aPad->m_Drill.y() = aPad->m_Drill.x();
}
else
aPad->m_DrillShape = PAD_OVAL;
// Read pad shape size:
aPad->m_Size.x = CTR_GET_LENGTH( *m_ShapeSize_X_Ctrl, internalUnits );
aPad->m_Size.y = CTR_GET_LENGTH( *m_ShapeSize_Y_Ctrl, internalUnits );
aPad->m_Size.x() = CTR_GET_LENGTH( *m_ShapeSize_X_Ctrl, internalUnits );
aPad->m_Size.y() = CTR_GET_LENGTH( *m_ShapeSize_Y_Ctrl, internalUnits );
if( aPad->m_PadShape == PAD_CIRCLE )
aPad->m_Size.y = aPad->m_Size.x;
aPad->m_Size.y() = aPad->m_Size.x();
// Read pad shape delta size:
// m_DeltaSize.x or m_DeltaSize.y must be NULL. for a trapezoid.
@ -738,8 +738,8 @@ bool DIALOG_PAD_PROPERTIES::TransfertDataToPad( D_PAD* aPad, bool aPromptOnError
LENGTH_PCB delta;
delta = CTR_GET_LENGTH( *m_ShapeDelta_Ctrl, internalUnits );
aPad->m_DeltaSize = m_radioBtnDeltaXdir->GetValue()?
VECTOR_PCB( delta, ZERO_LENGTH ):
VECTOR_PCB( ZERO_LENGTH, delta );
VECTOR_PCB::fromXY( delta, ZERO_LENGTH ):
VECTOR_PCB::fromXY( ZERO_LENGTH, delta );
// Read pad lenght die
aPad->m_LengthDie = CTR_GET_LENGTH( *m_LengthDieCtrl, internalUnits );
@ -747,30 +747,30 @@ bool DIALOG_PAD_PROPERTIES::TransfertDataToPad( D_PAD* aPad, bool aPromptOnError
// Test bad values (be sure delta values are not to large)
// remember DeltaSize.x is the Y size variation TODO: this can be optimized
bool error = false;
if( (aPad->m_DeltaSize.x < ZERO_LENGTH) && (aPad->m_DeltaSize.x <= -aPad->m_Size.y ) )
if( (aPad->m_DeltaSize.x() < ZERO_LENGTH) && (aPad->m_DeltaSize.x() <= -aPad->m_Size.y() ) )
{
aPad->m_DeltaSize.x = -aPad->m_Size.y + FROM_LEGACY_LU( 2 );
aPad->m_DeltaSize.x() = -aPad->m_Size.y() + FROM_LEGACY_LU( 2 );
error = true;
}
if( (aPad->m_DeltaSize.x > ZERO_LENGTH) && (aPad->m_DeltaSize.x >= aPad->m_Size.y ) )
if( (aPad->m_DeltaSize.x() > ZERO_LENGTH) && (aPad->m_DeltaSize.x() >= aPad->m_Size.y() ) )
{
aPad->m_DeltaSize.x = aPad->m_Size.y - FROM_LEGACY_LU( 2 );
aPad->m_DeltaSize.x() = aPad->m_Size.y() - FROM_LEGACY_LU( 2 );
error = true;
}
if( (aPad->m_DeltaSize.y < ZERO_LENGTH) && (aPad->m_DeltaSize.y <= -aPad->m_Size.x ) )
if( (aPad->m_DeltaSize.y() < ZERO_LENGTH) && (aPad->m_DeltaSize.y() <= -aPad->m_Size.x() ) )
{
aPad->m_DeltaSize.y = -aPad->m_Size.x + FROM_LEGACY_LU( 2 );
aPad->m_DeltaSize.y() = -aPad->m_Size.x() + FROM_LEGACY_LU( 2 );
error = true;
}
if( (aPad->m_DeltaSize.y > ZERO_LENGTH) && (aPad->m_DeltaSize.y >= aPad->m_Size.x ) )
if( (aPad->m_DeltaSize.y() > ZERO_LENGTH) && (aPad->m_DeltaSize.y() >= aPad->m_Size.x() ) )
{
aPad->m_DeltaSize.y = aPad->m_Size.x - FROM_LEGACY_LU( 2 );
aPad->m_DeltaSize.y() = aPad->m_Size.x() - FROM_LEGACY_LU( 2 );
error = true;
}
// Read pad shape offset:
aPad->m_Offset.x = CTR_GET_LENGTH( *m_ShapeOffset_X_Ctrl, internalUnits );
aPad->m_Offset.y = CTR_GET_LENGTH( *m_ShapeOffset_Y_Ctrl, internalUnits );
aPad->m_Offset.x() = CTR_GET_LENGTH( *m_ShapeOffset_X_Ctrl, internalUnits );
aPad->m_Offset.y() = CTR_GET_LENGTH( *m_ShapeOffset_Y_Ctrl, internalUnits );
long orient_value = 0;
msg = m_PadOrientCtrl->GetValue();
@ -785,17 +785,17 @@ bool DIALOG_PAD_PROPERTIES::TransfertDataToPad( D_PAD* aPad, bool aPromptOnError
switch( aPad->m_PadShape )
{
case PAD_CIRCLE:
aPad->m_Offset = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH ); // wxSize( 0, 0 );
aPad->m_DeltaSize = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH );
aPad->m_Size.y = aPad->m_Size.x;
aPad->m_Offset = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH ); // wxSize( 0, 0 );
aPad->m_DeltaSize = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );
aPad->m_Size.y() = aPad->m_Size.x();
break;
case PAD_RECT:
aPad->m_DeltaSize = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH );
aPad->m_DeltaSize = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );
break;
case PAD_OVAL:
aPad->m_DeltaSize = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH );
aPad->m_DeltaSize = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );
break;
case PAD_TRAPEZOID:
@ -809,14 +809,14 @@ bool DIALOG_PAD_PROPERTIES::TransfertDataToPad( D_PAD* aPad, bool aPromptOnError
case PAD_CONN:
case PAD_SMD:
aPad->m_Offset = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH );
aPad->m_Drill = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH );
aPad->m_Offset = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );
aPad->m_Drill = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );
break;
case PAD_HOLE_NOT_PLATED:
// Mechanical purpose only:
// no offset, no net name, no pad name allowed
aPad->m_Offset = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH ); //wxSize( 0, 0 );
aPad->m_Offset = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH ); //wxSize( 0, 0 );
aPad->SetPadName( wxEmptyString );
aPad->SetNetname( wxEmptyString );
break;
@ -873,8 +873,8 @@ bool DIALOG_PAD_PROPERTIES::TransfertDataToPad( D_PAD* aPad, bool aPromptOnError
/* Test for incorrect values */
if( aPromptOnError )
{
if( (aPad->m_Size.x < aPad->m_Drill.x )
|| (aPad->m_Size.y < aPad->m_Drill.y ) )
if( (aPad->m_Size.x() < aPad->m_Drill.x() )
|| (aPad->m_Size.y() < aPad->m_Drill.y() ) )
{
DisplayError( NULL, _( "Incorrect value for pad drill: pad drill bigger than pad size" ) );
return false;
@ -883,7 +883,7 @@ bool DIALOG_PAD_PROPERTIES::TransfertDataToPad( D_PAD* aPad, bool aPromptOnError
int padlayers_mask = PadLayerMask & (LAYER_BACK | LAYER_FRONT);
if( padlayers_mask == 0 )
{
if( aPad->m_Drill.x != ZERO_LENGTH || aPad->m_Drill.y != ZERO_LENGTH )
if( aPad->m_Drill.x() != ZERO_LENGTH || aPad->m_Drill.y() != ZERO_LENGTH )
{
msg = _( "Error: pad is not on a copper layer and has a hole" );
if( aPad->m_Attribut == PAD_HOLE_NOT_PLATED )
@ -897,8 +897,8 @@ if you do not want this pad plotted in gerber files");
}
}
if( ( aPad->m_Size.x / 2 <= ABS( aPad->m_Offset.x ) )
|| ( aPad->m_Size.y / 2 <= ABS( aPad->m_Offset.y ) ) )
if( ( aPad->m_Size.x() / 2 <= abs( aPad->m_Offset.x() ) )
|| ( aPad->m_Size.y() / 2 <= abs( aPad->m_Offset.y() ) ) )
{
DisplayError( NULL, _( "Incorrect value for pad offset" ) );
return false;

View File

@ -52,7 +52,7 @@ void DrawSegmentWhileMovingFootprint( EDA_DRAW_PANEL* panel, wxDC* DC )
if( pt_pad )
{
pos = pt_pad->m_Pos - g_Offset_Module;
pos = TO_LEGACY_LU_WXP( pt_pad->m_Pos ) - g_Offset_Module;
Track->m_Start = pos;
}
@ -60,7 +60,7 @@ void DrawSegmentWhileMovingFootprint( EDA_DRAW_PANEL* panel, wxDC* DC )
if( pt_pad )
{
pos = pt_pad->m_Pos - g_Offset_Module;
pos = TO_LEGACY_LU_WXP( pt_pad->m_Pos ) - g_Offset_Module;
Track->m_End = pos;
}
@ -105,7 +105,7 @@ void Build_1_Pad_SegmentsToDrag( EDA_DRAW_PANEL* panel, wxDC* DC, D_PAD* PtPad )
Track = pcb->m_Track->GetStartNetCode( net_code );
pos = PtPad->m_Pos;
pos = TO_LEGACY_LU_WXP( PtPad->m_Pos );
LayerMask = PtPad->m_layerMask;
for( ; Track; Track = Track->Next() )

View File

@ -592,7 +592,7 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_li
// We can stop the test when pad->m_Pos.x > x_limit
// because the list is sorted by X values
if( pad->m_Pos.x > x_limit )
if( TO_LEGACY_LU( pad->m_Pos.x() ) > x_limit )
break;
// No problem if pads are on different copper layers,
@ -617,7 +617,7 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_li
/* Here, we must test clearance between holes and pads
* dummy pad size and shape is adjusted to pad drill size and shape
*/
if( pad->m_Drill.x != ZERO_LENGTH )
if( pad->m_Drill.x() != ZERO_LENGTH )
{
// pad under testing has a hole, test this hole against pad reference
dummypad.SetPosition( pad->GetPosition() );
@ -637,7 +637,7 @@ bool DRC::doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_li
}
}
if( aRefPad->m_Drill.x != ZERO_LENGTH ) // pad reference has a hole
if( aRefPad->m_Drill.x() != ZERO_LENGTH ) // pad reference has a hole
{
dummypad.SetPosition( aRefPad->GetPosition() );
dummypad.m_Size = aRefPad->m_Drill;

View File

@ -290,7 +290,7 @@ bool DRC::doTrackDrc( TRACK* aRefSeg, TRACK* aStart, bool testPads )
* checkClearanceSegmToPad(),a pseudo pad is used, with a shape and a
* size like the hole
*/
if( pad->m_Drill.x == ZERO_LENGTH )
if( pad->m_Drill.x() == ZERO_LENGTH )
continue;
dummypad.m_Size = pad->m_Drill;
@ -633,7 +633,7 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
m_segmEnd.x = m_segmEnd.y = 0;
m_padToTestPos = relativePadPos;
diag = checkClearanceSegmToPad( aPad, TO_LEGACY_LU( aRefPad->m_Size.x ), dist_min );
diag = checkClearanceSegmToPad( aPad, TO_LEGACY_LU( aRefPad->m_Size.x() ), dist_min );
break;
case PAD_RECT:
@ -664,10 +664,10 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
relativePadPos.x = ABS( relativePadPos.x );
relativePadPos.y = ABS( relativePadPos.y );
if( ( relativePadPos.x - ( (size.x + TO_LEGACY_LU( aRefPad->m_Size.x ) ) / 2 ) ) >= dist_min )
if( ( relativePadPos.x - ( (size.x + TO_LEGACY_LU( aRefPad->m_Size.x() ) ) / 2 ) ) >= dist_min )
diag = true;
if( ( relativePadPos.y - ( (size.y + TO_LEGACY_LU( aRefPad->m_Size.y) ) / 2 ) ) >= dist_min )
if( ( relativePadPos.y - ( (size.y + TO_LEGACY_LU( aRefPad->m_Size.y() ) ) / 2 ) ) >= dist_min )
diag = true;
}
else // at least one pad has any other orient. Test is more tricky
@ -716,15 +716,15 @@ bool DRC::checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad )
int segm_width;
m_segmAngle = aRefPad->m_Orient; // Segment orient.
if( aRefPad->m_Size.y < aRefPad->m_Size.x ) // Build an horizontal equiv segment
if( aRefPad->m_Size.y() < aRefPad->m_Size.x() ) // Build an horizontal equiv segment
{
segm_width = TO_LEGACY_LU( aRefPad->m_Size.y );
m_segmLength = TO_LEGACY_LU( aRefPad->m_Size.x - aRefPad->m_Size.y );
segm_width = TO_LEGACY_LU( aRefPad->m_Size.y() );
m_segmLength = TO_LEGACY_LU( aRefPad->m_Size.x() - aRefPad->m_Size.y() );
}
else // Vertical oval: build an horizontal equiv segment and rotate 90.0 deg
{
segm_width = TO_LEGACY_LU( aRefPad->m_Size.x );
m_segmLength = TO_LEGACY_LU( aRefPad->m_Size.y - aRefPad->m_Size.x );
segm_width = TO_LEGACY_LU( aRefPad->m_Size.x() );
m_segmLength = TO_LEGACY_LU( aRefPad->m_Size.y() - aRefPad->m_Size.x() );
m_segmAngle += 900;
}
@ -796,13 +796,13 @@ bool DRC::checkClearanceSegmToPad( const D_PAD* aPad, int aSegmentWidth, int aMi
int segmHalfWidth = aSegmentWidth / 2;
seuil = segmHalfWidth + aMinDist;
padHalfsize.x = TO_LEGACY_LU( aPad->m_Size.x / 2 );
padHalfsize.y = TO_LEGACY_LU( aPad->m_Size.y / 2 );
padHalfsize.x = TO_LEGACY_LU( aPad->m_Size.x() / 2 );
padHalfsize.y = TO_LEGACY_LU( aPad->m_Size.y() / 2 );
if( aPad->m_PadShape == PAD_TRAPEZOID ) // The size is bigger, due to m_DeltaSize extra size
{
padHalfsize.x += TO_LEGACY_LU( ABS(aPad->m_DeltaSize.y) / 2 ); // Remember: m_DeltaSize.y is the m_Size.x change
padHalfsize.y += TO_LEGACY_LU( ABS(aPad->m_DeltaSize.x) / 2 ); // Remember: m_DeltaSize.x is the m_Size.y change
padHalfsize.x += TO_LEGACY_LU( abs( aPad->m_DeltaSize.y() ) / 2 ); // Remember: m_DeltaSize.y is the m_Size.x change
padHalfsize.y += TO_LEGACY_LU( abs( aPad->m_DeltaSize.x() ) / 2 ); // Remember: m_DeltaSize.x is the m_Size.y change
}
if( aPad->m_PadShape == PAD_CIRCLE )

View File

@ -82,7 +82,7 @@ void FOOTPRINT_EDIT_FRAME::Place_Ancre( MODULE* pt_mod )
for( ; pt_pad != NULL; pt_pad = pt_pad->Next() )
{
pt_pad->m_Pos0 += VECTOR_PCB( FROM_LEGACY_LU( moveVector.x ), FROM_LEGACY_LU( moveVector.y ) );
pt_pad->m_Pos0 += VECTOR_PCB::fromXY( FROM_LEGACY_LU( moveVector.x ), FROM_LEGACY_LU( moveVector.y ) );
}
/* Update the draw element coordinates. */

View File

@ -125,7 +125,7 @@ TRACK* PCB_EDIT_FRAME::Begin_Route( TRACK* aTrack, wxDC* aDC )
pt_pad = (D_PAD*) LockPoint;
/* A pad is found: put the starting point on pad center */
pos = pt_pad->m_Pos;
pos = TO_LEGACY_LU_WXP( pt_pad->m_Pos );
GetBoard()->SetHighLightNet( pt_pad->GetNet() );
}
else /* A track segment is found */
@ -1067,7 +1067,7 @@ void DeleteNullTrackSegments( BOARD* pcb, DLIST<TRACK>& aTrackList )
*/
void EnsureEndTrackOnPad( D_PAD* Pad )
{
if( g_CurrentTrackSegment->m_End == Pad->m_Pos ) // Ok !
if( g_CurrentTrackSegment->m_End == TO_LEGACY_LU_WXP( Pad->m_Pos ) ) // Ok !
{
g_CurrentTrackSegment->end = Pad;
g_CurrentTrackSegment->SetState( END_ONPAD, ON );
@ -1084,7 +1084,7 @@ void EnsureEndTrackOnPad( D_PAD* Pad )
lasttrack->end = g_CurrentTrackSegment;
}
g_CurrentTrackSegment->m_End = Pad->m_Pos;
g_CurrentTrackSegment->m_End = TO_LEGACY_LU_WXP( Pad->m_Pos );
g_CurrentTrackSegment->SetState( END_ONPAD, OFF );
g_CurrentTrackSegment->end = Pad;

View File

@ -252,70 +252,70 @@ void CreatePadsShapesSection( FILE* file, BOARD* pcb )
fprintf( file, "PAD PAD%d", pad->GetSubRatsnest() );
int dx = TO_LEGACY_LU( pad->m_Size.x / 2 );
int dy = TO_LEGACY_LU( pad->m_Size.y / 2 );
int dx = TO_LEGACY_LU( pad->m_Size.x() / 2 );
int dy = TO_LEGACY_LU( pad->m_Size.y() / 2 );
switch( pad->m_PadShape )
{
default:
case PAD_CIRCLE:
pad_type = "ROUND"; // how about oval holes?
fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x ) );
fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x() ) );
fprintf( file, "CIRCLE %d %d %d\n",
TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ), dx );
TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ), dx );
break;
case PAD_RECT:
pad_type = "RECTANGULAR";
fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x ) );
fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x() ) );
fprintf( file, "RECTANGLE %d %d %d %d\n",
TO_LEGACY_LU( pad->m_Offset.x ) - dx, -TO_LEGACY_LU( pad->m_Offset.y ) - dy,
TO_LEGACY_LU( pad->m_Size.x ), TO_LEGACY_LU( pad->m_Size.y ) );
TO_LEGACY_LU( pad->m_Offset.x() ) - dx, -TO_LEGACY_LU( pad->m_Offset.y() ) - dy,
TO_LEGACY_LU( pad->m_Size.x() ), TO_LEGACY_LU( pad->m_Size.y() ) );
break;
case PAD_OVAL: /* Create outline by 2 lines and 2 arcs */
{
pad_type = "FINGER";
fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x ) );
fprintf( file, " %s %d\n", pad_type, ( int )TO_LEGACY_LU( pad->m_Drill.x() ) );
int dr = dx - dy;
if( dr >= 0 ) // Horizontal oval
{
int radius = dy;
fprintf( file, "LINE %d %d %d %d\n",
-dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - radius,
dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - radius );
-dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius,
dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius );
fprintf( file, "ARC %d %d %d %d %d %d\n",
dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - radius,
dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + radius,
dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) );
dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius,
dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius,
dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) );
fprintf( file, "LINE %d %d %d %d\n",
dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + radius,
-dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + radius );
dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius,
-dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius );
fprintf( file, "ARC %d %d %d %d %d %d\n",
-dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + radius,
-dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - radius,
-dr + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) );
-dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + radius,
-dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - radius,
-dr + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) );
}
else // Vertical oval
{
dr = -dr;
int radius = dx;
fprintf( file, "LINE %d %d %d %d\n",
-radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - dr,
-radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + dr );
-radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr,
-radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr );
fprintf( file, "ARC %d %d %d %d %d %d\n",
-radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + dr,
radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + dr,
TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + dr );
-radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr,
radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr,
TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr );
fprintf( file, "LINE %d %d %d %d\n",
radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) + dr,
radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - dr );
radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) + dr,
radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr );
fprintf( file, "ARC %d %d %d %d %d %d\n",
radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - dr,
-radius + TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - dr,
TO_LEGACY_LU( pad->m_Offset.x ), -TO_LEGACY_LU( pad->m_Offset.y ) - dr );
radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr,
-radius + TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr,
TO_LEGACY_LU( pad->m_Offset.x() ), -TO_LEGACY_LU( pad->m_Offset.y() ) - dr );
}
break;
}
@ -410,7 +410,7 @@ void CreateShapesSection( FILE* file, BOARD* pcb )
NORMALIZE_ANGLE_POS( orient );
fprintf( file, "PIN %s PAD%d %d %d %s %d %s",
TO_UTF8( pinname ), pad->GetSubRatsnest(),
TO_LEGACY_LU( pad->m_Pos0.x ), TO_LEGACY_LU( -pad->m_Pos0.y ),
TO_LEGACY_LU( pad->m_Pos0.x() ), TO_LEGACY_LU( -pad->m_Pos0.y() ),
layer, orient / 10, mirror );
if( orient % 10 )

View File

@ -881,11 +881,11 @@ static void export_vrml_edge_module( EDGE_MODULE* module ) /*{{{*/
static void export_vrml_pad( BOARD* pcb, D_PAD* pad ) /*{{{*/
{
double hole_drill_w = (double) TO_LEGACY_LU_DBL( pad->m_Drill.x / 2 );
double hole_drill_h = (double) TO_LEGACY_LU_DBL( pad->m_Drill.y / 2 );
double hole_drill_w = (double) TO_LEGACY_LU_DBL( pad->m_Drill.x() / 2 );
double hole_drill_h = (double) TO_LEGACY_LU_DBL( pad->m_Drill.y() / 2 );
double hole_drill = MIN( hole_drill_w, hole_drill_h );
double hole_x = pad->m_Pos.x;
double hole_y = pad->m_Pos.y;
double hole_x = TO_LEGACY_LU_DBL( pad->m_Pos.x() );
double hole_y = TO_LEGACY_LU_DBL( pad->m_Pos.y() );
/* Export the hole on the edge layer */
if( hole_drill > 0 )
@ -916,8 +916,8 @@ static void export_vrml_pad( BOARD* pcb, D_PAD* pad ) /*{{{*/
wxSize pad_delta = TO_LEGACY_LU_WXS( pad->m_DeltaSize );
double pad_dx = pad_delta.x / 2;
double pad_dy = pad_delta.y / 2;
double pad_w = TO_LEGACY_LU_DBL( pad->m_Size.x / 2 );
double pad_h = TO_LEGACY_LU_DBL( pad->m_Size.y / 2 );
double pad_w = TO_LEGACY_LU_DBL( pad->m_Size.x() / 2 );
double pad_h = TO_LEGACY_LU_DBL( pad->m_Size.y() / 2 );
for( int layer = FIRST_COPPER_LAYER; layer < copper_layers; layer++ )
{

View File

@ -127,22 +127,22 @@ void Build_Holes_List( BOARD* aPcb,
if( aGenerateNPTH_list && pad->m_Attribut != PAD_HOLE_NOT_PLATED )
continue;
if( pad->m_Drill.x == ZERO_LENGTH )
if( pad->m_Drill.x() == ZERO_LENGTH )
continue;
new_hole.m_Hole_NotPlated = (pad->m_Attribut == PAD_HOLE_NOT_PLATED);
new_hole.m_Tool_Reference = -1; // Flag is: Not initialized
new_hole.m_Hole_Orient = pad->m_Orient;
new_hole.m_Hole_Shape = 0; // hole shape: round
new_hole.m_Hole_Diameter = min( TO_LEGACY_LU( pad->m_Drill.x ), TO_LEGACY_LU( pad->m_Drill.y ) );
new_hole.m_Hole_Diameter = min( TO_LEGACY_LU( pad->m_Drill.x() ), TO_LEGACY_LU( pad->m_Drill.y() ) );
new_hole.m_Hole_Size.x = new_hole.m_Hole_Size.y = new_hole.m_Hole_Diameter;
if( pad->m_DrillShape != PAD_CIRCLE )
new_hole.m_Hole_Shape = 1; // oval flag set
new_hole.m_Hole_Size.x = TO_LEGACY_LU( pad->m_Drill.x );
new_hole.m_Hole_Size.y = TO_LEGACY_LU( pad->m_Drill.y );
new_hole.m_Hole_Pos = pad->m_Pos; // hole position
new_hole.m_Hole_Size.x = TO_LEGACY_LU( pad->m_Drill.x() );
new_hole.m_Hole_Size.y = TO_LEGACY_LU( pad->m_Drill.y() );
new_hole.m_Hole_Pos = TO_LEGACY_LU_WXP( pad->m_Pos ); // hole position
new_hole.m_Hole_Bottom_Layer = LAYER_N_BACK;
new_hole.m_Hole_Top_Layer = LAYER_N_FRONT;// pad holes are through holes
aHoleListBuffer.push_back( new_hole );

View File

@ -438,19 +438,20 @@ void PCB_EDIT_FRAME::GenModuleReport( wxCommandEvent& event )
{
fprintf( rptfile, "$PAD \"%.4s\"\n", pad->m_Padname );
sprintf( line, "position %9.6f %9.6f\n",
TO_LEGACY_LU_DBL( pad->m_Pos0.x ) * conv_unit,
TO_LEGACY_LU_DBL( pad->m_Pos0.y ) * conv_unit );
TO_LEGACY_LU_DBL( pad->m_Pos0.x() ) * conv_unit,
TO_LEGACY_LU_DBL( pad->m_Pos0.y() ) * conv_unit );
fputs( line, rptfile );
sprintf( line, "size %9.6f %9.6f\n",
TO_LEGACY_LU_DBL( pad->m_Size.x ) * conv_unit,
TO_LEGACY_LU_DBL( pad->m_Size.y ) * conv_unit );
TO_LEGACY_LU_DBL( pad->m_Size.x() ) * conv_unit,
TO_LEGACY_LU_DBL( pad->m_Size.y() ) * conv_unit );
fputs( line, rptfile );
sprintf( line, "drill %9.6f\n", TO_LEGACY_LU_DBL( pad->m_Drill.x ) * conv_unit );
sprintf( line, "drill %9.6f\n",
TO_LEGACY_LU_DBL( pad->m_Drill.x() ) * conv_unit );
fputs( line, rptfile );
sprintf( line, "shape_offset %9.6f %9.6f\n",
TO_LEGACY_LU_DBL( pad->m_Offset.x ) * conv_unit,
TO_LEGACY_LU_DBL( pad->m_Offset.y ) * conv_unit );
TO_LEGACY_LU_DBL( pad->m_Offset.x() ) * conv_unit,
TO_LEGACY_LU_DBL( pad->m_Offset.y() ) * conv_unit );
fputs( line, rptfile );
sprintf( line, "orientation %.2f\n",

View File

@ -254,19 +254,19 @@ void PCB_BASE_FRAME::Global_Import_Pad_Settings( D_PAD* aPad, bool aDraw )
if( pt_pad->m_PadShape != PAD_TRAPEZOID )
{
pt_pad->m_DeltaSize.x = ZERO_LENGTH;
pt_pad->m_DeltaSize.y = ZERO_LENGTH;
pt_pad->m_DeltaSize.x() = ZERO_LENGTH;
pt_pad->m_DeltaSize.y() = ZERO_LENGTH;
}
if( pt_pad->m_PadShape == PAD_CIRCLE )
pt_pad->m_Size.y = pt_pad->m_Size.x;
pt_pad->m_Size.y() = pt_pad->m_Size.x();
switch( pt_pad->m_Attribut & 0x7F )
{
case PAD_SMD:
case PAD_CONN:
pt_pad->m_Drill = VECTOR_PCB(ZERO_LENGTH, ZERO_LENGTH);//wxSize( 0, 0 );
pt_pad->m_Offset.x = ZERO_LENGTH;
pt_pad->m_Offset.y = ZERO_LENGTH;
pt_pad->m_Drill = VECTOR_PCB::fromXY(ZERO_LENGTH, ZERO_LENGTH);//wxSize( 0, 0 );
pt_pad->m_Offset.x() = ZERO_LENGTH;
pt_pad->m_Offset.y() = ZERO_LENGTH;
break;
default:

View File

@ -369,16 +369,16 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
{
Pad->SetPadName( params[10] );
}
Pad->m_Pos.x = (ibuf[0] + ibuf[2]) / 2;
Pad->m_Pos.y = (ibuf[1] + ibuf[3]) / 2;
Pad->m_Size.x = FROM_LEGACY_LU( ibuf[4] + abs( ibuf[0] - ibuf[2] ) );
Pad->m_Size.y = FROM_LEGACY_LU( ibuf[4] + abs( ibuf[1] - ibuf[3] ) );
Pad->m_Pos.x += m_Pos.x;
Pad->m_Pos.y += m_Pos.y;
Pad->m_Pos.x() = FROM_LEGACY_LU( (ibuf[0] + ibuf[2]) / 2 );
Pad->m_Pos.y() = FROM_LEGACY_LU( (ibuf[1] + ibuf[3]) / 2 );
Pad->m_Size.x() = FROM_LEGACY_LU( ibuf[4] + abs( ibuf[0] - ibuf[2] ) );
Pad->m_Size.y() = FROM_LEGACY_LU( ibuf[4] + abs( ibuf[1] - ibuf[3] ) );
Pad->m_Pos.x() += FROM_LEGACY_LU( m_Pos.x );
Pad->m_Pos.y() += FROM_LEGACY_LU( m_Pos.y );
if( !TestFlags( params[iflgidx], 0x0100, wxT( "square" ) ) )
{
if( Pad->m_Size.x == Pad->m_Size.y )
if( Pad->m_Size.x() == Pad->m_Size.y() )
Pad->m_PadShape = PAD_ROUND;
else
Pad->m_PadShape = PAD_OVAL;
@ -428,14 +428,15 @@ bool MODULE::Read_GPCB_Descr( const wxString& CmpFullFileName )
Pad->SetPadName( params[9] );
}
Pad->m_Pos.x = ibuf[0];
Pad->m_Pos.y = ibuf[1];
Pad->m_Drill.x = Pad->m_Drill.y = FROM_LEGACY_LU( (int) ibuf[5] );
Pad->m_Size.x = Pad->m_Size.y = FROM_LEGACY_LU( ibuf[3] ) + Pad->m_Drill.x;
Pad->m_Pos.x += m_Pos.x;
Pad->m_Pos.y += m_Pos.y;
Pad->m_Pos.x() = FROM_LEGACY_LU( ibuf[0] );
Pad->m_Pos.y() = FROM_LEGACY_LU( ibuf[1] );
Pad->m_Drill.x() = Pad->m_Drill.y() = FROM_LEGACY_LU( (int) ibuf[5] );
Pad->m_Size.x() = Pad->m_Size.y() =
FROM_LEGACY_LU( ibuf[3] ) + Pad->m_Drill.x();
Pad->m_Pos.x() += FROM_LEGACY_LU( m_Pos.x );
Pad->m_Pos.y() += FROM_LEGACY_LU( m_Pos.y );
if( (Pad->m_PadShape == PAD_ROUND) && (Pad->m_Size.x != Pad->m_Size.y) )
if( (Pad->m_PadShape == PAD_ROUND) && (Pad->m_Size.x() != Pad->m_Size.y()) )
Pad->m_PadShape = PAD_OVAL;
m_Pads.PushBack( Pad );

View File

@ -89,7 +89,7 @@ void PlacePad( BOARD* Pcb, D_PAD* pt_pad, int color, int marge, int op_logic )
int dx, dy;
wxPoint shape_pos = pt_pad->ReturnShapePos();
dx = TO_LEGACY_LU( pt_pad->m_Size.x / 2 );
dx = TO_LEGACY_LU( pt_pad->m_Size.x() / 2 );
dx += marge;
if( pt_pad->m_PadShape == PAD_CIRCLE )
@ -100,13 +100,13 @@ void PlacePad( BOARD* Pcb, D_PAD* pt_pad, int color, int marge, int op_logic )
}
dy = TO_LEGACY_LU( pt_pad->m_Size.y / 2 );
dy = TO_LEGACY_LU( pt_pad->m_Size.y() / 2 );
dy += marge;
if( pt_pad->m_PadShape == PAD_TRAPEZOID )
{
dx += TO_LEGACY_LU( ABS( pt_pad->m_DeltaSize.y ) / 2 );
dy += TO_LEGACY_LU( ABS( pt_pad->m_DeltaSize.x ) / 2 );
dx += TO_LEGACY_LU( abs( pt_pad->m_DeltaSize.y() ) / 2 );
dy += TO_LEGACY_LU( abs( pt_pad->m_DeltaSize.x() ) / 2 );
}
if( ( pt_pad->m_Orient % 900 ) == 0 ) /* The pad is a rectangle

View File

@ -586,16 +586,16 @@ int PCB_BASE_FRAME::ReadSetup( LINE_READER* aReader )
if( stricmp( line, "PadSize" ) == 0 )
{
g_Pad_Master.m_Size.x = LENGTH_LOAD_STR( data );
g_Pad_Master.m_Size.x() = LENGTH_LOAD_STR( data );
data = strtok( NULL, delims );
g_Pad_Master.m_Size.y = LENGTH_LOAD_STR( data );
g_Pad_Master.m_Size.y() = LENGTH_LOAD_STR( data );
continue;
}
if( stricmp( line, "PadDrill" ) == 0 )
{
g_Pad_Master.m_Drill.x = LENGTH_LOAD_STR( data );
g_Pad_Master.m_Drill.y = g_Pad_Master.m_Drill.x;
g_Pad_Master.m_Drill.x() = LENGTH_LOAD_STR( data );
g_Pad_Master.m_Drill.y() = g_Pad_Master.m_Drill.x();
continue;
}
@ -757,8 +757,8 @@ static int WriteSetup( FILE* aFile, PCB_EDIT_FRAME* aFrame, BOARD* aBoard )
fprintf( aFile, "EdgeModWidth %d\n", g_ModuleSegmentWidth );
fprintf( aFile, "TextModSize %d %d\n", g_ModuleTextSize.x, g_ModuleTextSize.y );
fprintf( aFile, "TextModWidth %d\n", g_ModuleTextWidth );
fprintf( aFile, "PadSize "FM_LENSV" "FM_LENSV"\n", ARG_LENSV( g_Pad_Master.m_Size.x ), ARG_LENSV( g_Pad_Master.m_Size.y ) );
fprintf( aFile, "PadDrill "FM_LENSV"\n", ARG_LENSV( g_Pad_Master.m_Drill.x ) );
fprintf( aFile, "PadSize "FM_LENSV" "FM_LENSV"\n", ARG_LENSV( g_Pad_Master.m_Size.x() ), ARG_LENSV( g_Pad_Master.m_Size.y() ) );
fprintf( aFile, "PadDrill "FM_LENSV"\n", ARG_LENSV( g_Pad_Master.m_Drill.x() ) );
fprintf( aFile,
"Pad2MaskClearance %d\n",
aBoard->GetBoardDesignSettings()->m_SolderMaskMargin );

View File

@ -165,7 +165,7 @@ bool Magnetize( BOARD* m_Pcb, PCB_EDIT_FRAME* frame, int aCurrentTool, wxSize gr
if( doCheckNet && currTrack && currTrack->GetNet() != pad->GetNet() )
return false;
*curpos = pad->m_Pos;
*curpos = TO_LEGACY_LU_WXP( pad->m_Pos );
return true;
}
}

View File

@ -708,18 +708,18 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
for( ; pad != NULL; pad = (D_PAD*) pad->Next() )
{
pad->m_Pos0 = FROM_LEGACY_LU_VEC( pad->m_Pos );
pad->m_Pos0 = pad->m_Pos;
pad->m_Orient -= angle;
wxPoint of;
of.x = TO_LEGACY_LU( pad->m_Offset.x );
of.y = TO_LEGACY_LU( pad->m_Offset.y );
of.x = TO_LEGACY_LU( pad->m_Offset.x() );
of.y = TO_LEGACY_LU( pad->m_Offset.y() );
RotatePoint( &of.x, &of.y, angle );
pad->m_Offset.x = FROM_LEGACY_LU( of.x );
pad->m_Offset.y = FROM_LEGACY_LU( of.y );
EXCHG( pad->m_Size.x, pad->m_Size.y );
pad->m_Offset.x() = FROM_LEGACY_LU( of.x );
pad->m_Offset.y() = FROM_LEGACY_LU( of.y );
EXCHG( pad->m_Size.x(), pad->m_Size.y() );
wxSize delta = TO_LEGACY_LU_WXS( pad->m_DeltaSize );
RotatePoint( &delta.x, &delta.y, -angle );
pad->m_DeltaSize = VECTOR_PCB( FROM_LEGACY_LU( delta.x ), FROM_LEGACY_LU( delta.y ) );
pad->m_DeltaSize = VECTOR_PCB::fromXY( FROM_LEGACY_LU( delta.x ), FROM_LEGACY_LU( delta.y ) );
}
module->m_Reference->m_Pos0 = module->m_Reference->m_Pos;
@ -756,10 +756,10 @@ void FOOTPRINT_EDIT_FRAME::Transform( MODULE* module, int transform )
case ID_MODEDIT_MODULE_MIRROR:
for( ; pad != NULL; pad = (D_PAD*) pad->Next() )
{
NEGATE( pad->m_Pos.y );
NEGATE( pad->m_Pos0.y );
NEGATE( pad->m_Offset.y );
NEGATE( pad->m_DeltaSize.y );
NEGATE( pad->m_Pos.y() );
NEGATE( pad->m_Pos0.y() );
NEGATE( pad->m_Offset.y() );
NEGATE( pad->m_DeltaSize.y() );
if( pad->m_Orient )
pad->m_Orient = 3600 - pad->m_Orient;

View File

@ -23,7 +23,7 @@
static D_PAD* s_CurrentSelectedPad;
static wxPoint Pad_OldPos;
static VECTOR_PCB Pad_OldPos;
/* Cancel move pad command.
@ -76,7 +76,7 @@ static void Show_Pad_Move( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPo
if( aErase )
pad->Draw( aPanel, aDC, GR_XOR );
pad->m_Pos = screen->GetCrossHairPosition();
pad->m_Pos = FROM_LEGACY_LU_VEC( screen->GetCrossHairPosition() );
pad->Draw( aPanel, aDC, GR_XOR );
if( !g_Drag_Pistes_On )
@ -91,12 +91,12 @@ static void Show_Pad_Move( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPo
if( g_DragSegmentList[ii].m_Pad_Start )
{
Track->m_Start = pad->m_Pos;
Track->m_Start = TO_LEGACY_LU_WXP( pad->m_Pos );
}
if( g_DragSegmentList[ii].m_Pad_End )
{
Track->m_End = pad->m_Pos;
Track->m_End = TO_LEGACY_LU_WXP( pad->m_Pos );
}
Track->Draw( aPanel, aDC, GR_XOR );
@ -148,7 +148,7 @@ void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
aPad->m_Orient = g_Pad_Master.m_Orient +
( (MODULE*) aPad->GetParent() )->m_Orient;
aPad->m_Size = g_Pad_Master.m_Size;
aPad->m_DeltaSize = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH );//wxSize( 0, 0 );
aPad->m_DeltaSize = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );//wxSize( 0, 0 );
aPad->m_Offset = g_Pad_Master.m_Offset;
aPad->m_Drill = g_Pad_Master.m_Drill;
aPad->m_DrillShape = g_Pad_Master.m_DrillShape;
@ -160,7 +160,7 @@ void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
break;
case PAD_CIRCLE:
aPad->m_Size.y = aPad->m_Size.x;
aPad->m_Size.y() = aPad->m_Size.x();
break;
}
@ -168,8 +168,8 @@ void PCB_BASE_FRAME::Import_Pad_Settings( D_PAD* aPad, bool aDraw )
{
case PAD_SMD:
case PAD_CONN:
aPad->m_Drill = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH ); //wxSize( 0, 0 );
aPad->m_Offset = VECTOR_PCB( ZERO_LENGTH, ZERO_LENGTH );
aPad->m_Drill = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH ); //wxSize( 0, 0 );
aPad->m_Offset = VECTOR_PCB::fromXY( ZERO_LENGTH, ZERO_LENGTH );
}
aPad->ComputeShapeMaxRadius();
@ -200,11 +200,11 @@ void PCB_BASE_FRAME::AddPad( MODULE* Module, bool draw )
Import_Pad_Settings( Pad, false );
Pad->SetNetname( wxEmptyString );
Pad->m_Pos = GetScreen()->GetCrossHairPosition();
Pad->m_Pos = FROM_LEGACY_LU_VEC( GetScreen()->GetCrossHairPosition() );
// Set the relative pad position
// ( pad position for module orient, 0, and relative to the module position)
Pad->m_Pos0 = FROM_LEGACY_LU_VEC( Pad->m_Pos - Module->m_Pos );
Pad->m_Pos0 = Pad->m_Pos - FROM_LEGACY_LU_VEC( Module->m_Pos );
wxPoint p = TO_LEGACY_LU_WXP( Pad->m_Pos0 );
RotatePoint( &p, -Module->m_Orient );
Pad->m_Pos0 = FROM_LEGACY_LU_VEC( p );
@ -317,17 +317,17 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
// Set the old state
if( g_DragSegmentList[ii].m_Pad_Start )
Track->m_Start = Pad_OldPos;
Track->m_Start = TO_LEGACY_LU_WXP( Pad_OldPos );
if( g_DragSegmentList[ii].m_Pad_End )
Track->m_End = Pad_OldPos;
Track->m_End = TO_LEGACY_LU_WXP( Pad_OldPos );
picker.m_PickedItem = Track;
pickList.PushItem( picker );
}
/* Save old module and old items values */
wxPoint pad_curr_position = Pad->m_Pos;
wxPoint pad_curr_position = TO_LEGACY_LU_WXP( Pad->m_Pos );
Pad->m_Pos = Pad_OldPos;
@ -340,7 +340,7 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
SaveCopyInUndoList( pickList, UR_CHANGED );
}
Pad->m_Pos = pad_curr_position;
Pad->m_Pos = FROM_LEGACY_LU_VEC( pad_curr_position );
Pad->Draw( DrawPanel, DC, GR_XOR );
/* Redraw dragged track segments */
@ -350,10 +350,10 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
// Set the new state
if( g_DragSegmentList[ii].m_Pad_Start )
Track->m_Start = Pad->m_Pos;
Track->m_Start = TO_LEGACY_LU_WXP( Pad->m_Pos );
if( g_DragSegmentList[ii].m_Pad_End )
Track->m_End = Pad->m_Pos;
Track->m_End = TO_LEGACY_LU_WXP( Pad->m_Pos );
Track->SetState( IN_EDIT, OFF );
@ -362,12 +362,12 @@ void PCB_BASE_FRAME::PlacePad( D_PAD* Pad, wxDC* DC )
}
/* Compute local coordinates (i.e refer to Module position and for Module orient = 0) */
dX = Pad->m_Pos.x - Pad_OldPos.x;
dY = Pad->m_Pos.y - Pad_OldPos.y;
dX = TO_LEGACY_LU( Pad->m_Pos.x() - Pad_OldPos.x() );
dY = TO_LEGACY_LU( Pad->m_Pos.y() - Pad_OldPos.y() );
RotatePoint( &dX, &dY, -Module->m_Orient );
Pad->m_Pos0.x += FROM_LEGACY_LU( dX );
s_CurrentSelectedPad->m_Pos0.y += FROM_LEGACY_LU( dY ); /// @BUG???
Pad->m_Pos0.x() += FROM_LEGACY_LU( dX );
s_CurrentSelectedPad->m_Pos0.y() += FROM_LEGACY_LU( dY ); /// @BUG???
Pad->m_Flags = 0;
@ -402,13 +402,13 @@ void PCB_BASE_FRAME::RotatePad( D_PAD* Pad, wxDC* DC )
if( DC )
Module->Draw( DrawPanel, DC, GR_XOR );
EXCHG( Pad->m_Size.x, Pad->m_Size.y );
EXCHG( Pad->m_Drill.x, Pad->m_Drill.y );
EXCHG( Pad->m_Offset.x, Pad->m_Offset.y );
Pad->m_Offset.y = -Pad->m_Offset.y;
EXCHG( Pad->m_Size.x(), Pad->m_Size.y() );
EXCHG( Pad->m_Drill.x(), Pad->m_Drill.y() );
EXCHG( Pad->m_Offset.x(), Pad->m_Offset.y() );
Pad->m_Offset.y() = -Pad->m_Offset.y();
EXCHG( Pad->m_DeltaSize.x, Pad->m_DeltaSize.y );
Pad->m_DeltaSize.x = -Pad->m_DeltaSize.x;
EXCHG( Pad->m_DeltaSize.x(), Pad->m_DeltaSize.y() );
Pad->m_DeltaSize.x() = -Pad->m_DeltaSize.x();
Module->CalculateBoundingBox();
Pad->DisplayInfo( this );

View File

@ -260,10 +260,10 @@ MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
Module->m_Pads.PushFront( PtPad );
PtPad->SetPadName( wxT( "1" ) );
PtPad->m_Pos = Mself.m_End;
PtPad->m_Pos0 = FROM_LEGACY_LU_VEC( PtPad->m_Pos - Module->m_Pos );
PtPad->m_Size.x = PtPad->m_Size.y = FROM_LEGACY_LU( Mself.m_Width );
PtPad->m_layerMask = g_TabOneLayerMask[Module->GetLayer()];
PtPad->m_Pos = FROM_LEGACY_LU_VEC( Mself.m_End );
PtPad->m_Pos0 = PtPad->m_Pos - FROM_LEGACY_LU_VEC( Module->m_Pos );
PtPad->m_Size.x() = PtPad->m_Size.y() = FROM_LEGACY_LU( Mself.m_Width );
PtPad->m_layerMask = g_TabOneLayerMask[Module->GetLayer()];
PtPad->m_Attribut = PAD_SMD;
PtPad->m_PadShape = PAD_CIRCLE;
PtPad->ComputeShapeMaxRadius();
@ -275,8 +275,8 @@ MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
PtPad = newpad;
PtPad->SetPadName( wxT( "2" ) );
PtPad->m_Pos = Mself.m_Start;
PtPad->m_Pos0 = FROM_LEGACY_LU_VEC( PtPad->m_Pos - Module->m_Pos );
PtPad->m_Pos = FROM_LEGACY_LU_VEC( Mself.m_Start );
PtPad->m_Pos0 = PtPad->m_Pos - FROM_LEGACY_LU_VEC( Module->m_Pos );
/* Modify text positions. */
Module->DisplayInfo( this );
@ -552,8 +552,8 @@ MODULE* PCB_EDIT_FRAME::Create_MuWaveBasicShape( const wxString& name, int pad_c
Module->m_Pads.PushFront( pad );
pad->m_Size.x = pad->m_Size.y = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
pad->m_Pos = Module->m_Pos;
pad->m_Size.x() = pad->m_Size.y() = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
pad->m_Pos = FROM_LEGACY_LU_VEC( Module->m_Pos );
pad->m_PadShape = PAD_RECT;
pad->m_Attribut = PAD_SMD;
pad->m_layerMask = LAYER_FRONT;
@ -656,19 +656,19 @@ MODULE* PCB_EDIT_FRAME::Create_MuWaveComponent( int shape_type )
switch( shape_type )
{
case 0: //Gap :
pad->m_Pos0.x = FROM_LEGACY_LU( oX = -( gap_size + TO_LEGACY_LU( pad->m_Size.x ) ) / 2 );
pad->m_Pos.x += TO_LEGACY_LU( pad->m_Pos0.x );
pad->m_Pos0.x() = FROM_LEGACY_LU( oX = -( gap_size + TO_LEGACY_LU( pad->m_Size.x() ) ) / 2 );
pad->m_Pos.x() += pad->m_Pos0.x();
pad = pad->Next();
pad->m_Pos0.x = FROM_LEGACY_LU( oX + gap_size + TO_LEGACY_LU( pad->m_Size.x ) );
pad->m_Pos.x += TO_LEGACY_LU( pad->m_Pos0.x );
pad->m_Pos0.x() = FROM_LEGACY_LU( oX + gap_size + TO_LEGACY_LU( pad->m_Size.x() ) );
pad->m_Pos.x() += pad->m_Pos0.x();
break;
case 1: //Stub :
pad->SetPadName( wxT( "1" ) );
pad = pad->Next();
pad->m_Pos0.y = FROM_LEGACY_LU( -( gap_size + TO_LEGACY_LU( pad->m_Size.y ) ) / 2 );
pad->m_Size.y = FROM_LEGACY_LU( gap_size );
pad->m_Pos.y += TO_LEGACY_LU( pad->m_Pos0.y );
pad->m_Pos0.y() = FROM_LEGACY_LU( -( gap_size + TO_LEGACY_LU( pad->m_Size.y() ) ) / 2 );
pad->m_Size.y() = FROM_LEGACY_LU( gap_size );
pad->m_Pos.y() += pad->m_Pos0.y();
break;
case 2: // Arc Stub created by a polygonal approach:
@ -683,7 +683,7 @@ MODULE* PCB_EDIT_FRAME::Create_MuWaveComponent( int shape_type )
std::vector<wxPoint> polyPoints = edge->GetPolyPoints();
polyPoints.reserve( numPoints );
edge->m_Start0.y = TO_LEGACY_LU( -pad->m_Size.y / 2 );
edge->m_Start0.y = TO_LEGACY_LU( -pad->m_Size.y() / 2 );
polyPoints.push_back( wxPoint( 0, 0 ) );
@ -968,12 +968,12 @@ MODULE* PCB_EDIT_FRAME::Create_MuWavePolygonShape()
Module = Create_MuWaveBasicShape( cmp_name, pad_count );
pad1 = Module->m_Pads;
pad1->m_Pos0.x = FROM_LEGACY_LU( -ShapeSize.x / 2 );
pad1->m_Pos.x += TO_LEGACY_LU( pad1->m_Pos0.x );
pad1->m_Pos0.x() = FROM_LEGACY_LU( -ShapeSize.x / 2 );
pad1->m_Pos.x() += pad1->m_Pos0.x();
pad2 = (D_PAD*) pad1->Next();
pad2->m_Pos0.x = pad1->m_Pos0.x + FROM_LEGACY_LU( ShapeSize.x );
pad2->m_Pos.x += TO_LEGACY_LU( pad2->m_Pos0.x );
pad2->m_Pos0.x() = pad1->m_Pos0.x() + FROM_LEGACY_LU( ShapeSize.x );
pad2->m_Pos.x() += pad2->m_Pos0.x();
edge = new EDGE_MODULE( Module );
@ -987,13 +987,13 @@ MODULE* PCB_EDIT_FRAME::Create_MuWavePolygonShape()
polyPoints.reserve( 2 * PolyEdges.size() + 2 );
// Init start point coord:
polyPoints.push_back( wxPoint( TO_LEGACY_LU( pad1->m_Pos0.x ), 0 ) );
polyPoints.push_back( wxPoint( TO_LEGACY_LU( pad1->m_Pos0.x() ), 0 ) );
wxPoint first_coordinate, last_coordinate;
for( ii = 0; ii < PolyEdges.size(); ii++ ) // Copy points
{
last_coordinate.x = wxRound( PolyEdges[ii] * ShapeScaleX ) + TO_LEGACY_LU( pad1->m_Pos0.x );
last_coordinate.x = wxRound( PolyEdges[ii] * ShapeScaleX ) + TO_LEGACY_LU( pad1->m_Pos0.x() );
last_coordinate.y = -wxRound( PolyEdges[ii] * ShapeScaleY );
polyPoints.push_back( last_coordinate );
}
@ -1005,15 +1005,15 @@ MODULE* PCB_EDIT_FRAME::Create_MuWavePolygonShape()
case 0: // Single
case 2: // Single mirrored
// Init end point coord:
pad2->m_Pos0.x = FROM_LEGACY_LU( last_coordinate.x );
pad2->m_Pos0.x() = FROM_LEGACY_LU( last_coordinate.x );
polyPoints.push_back( wxPoint( last_coordinate.x, 0 ) );
pad1->m_Size.x = pad1->m_Size.y = FROM_LEGACY_LU( ABS( first_coordinate.y ) );
pad2->m_Size.x = pad2->m_Size.y = FROM_LEGACY_LU( ABS( last_coordinate.y ) );
pad1->m_Pos0.y = FROM_LEGACY_LU( first_coordinate.y / 2 );
pad2->m_Pos0.y = FROM_LEGACY_LU( last_coordinate.y / 2 );
pad1->m_Pos.y = TO_LEGACY_LU( pad1->m_Pos0.y ) + Module->m_Pos.y;
pad2->m_Pos.y = TO_LEGACY_LU( pad2->m_Pos0.y ) + Module->m_Pos.y;
pad1->m_Size.x() = pad1->m_Size.y() = FROM_LEGACY_LU( abs( first_coordinate.y ) );
pad2->m_Size.x() = pad2->m_Size.y() = FROM_LEGACY_LU( abs( last_coordinate.y ) );
pad1->m_Pos0.y() = FROM_LEGACY_LU( first_coordinate.y / 2 );
pad2->m_Pos0.y() = FROM_LEGACY_LU( last_coordinate.y / 2 );
pad1->m_Pos.y() = pad1->m_Pos0.y() + FROM_LEGACY_LU( Module->m_Pos.y );
pad2->m_Pos.y() = pad2->m_Pos0.y() + FROM_LEGACY_LU( Module->m_Pos.y );
break;
case 1: // Symmetric
@ -1026,8 +1026,8 @@ MODULE* PCB_EDIT_FRAME::Create_MuWavePolygonShape()
polyPoints.push_back( pt );
}
pad1->m_Size.x = pad1->m_Size.y = FROM_LEGACY_LU( 2 * ABS( first_coordinate.y ) );
pad2->m_Size.x = pad2->m_Size.y = FROM_LEGACY_LU( 2 * ABS( last_coordinate.y ) );
pad1->m_Size.x() = pad1->m_Size.y() = FROM_LEGACY_LU( 2 * abs( first_coordinate.y ) );
pad2->m_Size.x() = pad2->m_Size.y() = FROM_LEGACY_LU( 2 * abs( last_coordinate.y ) );
break;
}
@ -1073,7 +1073,7 @@ void PCB_EDIT_FRAME::Edit_Gap( wxDC* DC, MODULE* Module )
Module->Draw( DrawPanel, DC, GR_XOR );
/* Calculate the current dimension. */
gap_size = TO_LEGACY_LU( next_pad->m_Pos0.x - pad->m_Pos0.x - pad->m_Size.x );
gap_size = TO_LEGACY_LU( next_pad->m_Pos0.x() - pad->m_Pos0.x() - pad->m_Size.x() );
/* Entrer the desired length of the gap. */
msg = ReturnStringFromValue( g_UserUnit, gap_size, GetScreen()->GetInternalUnits() );
@ -1086,21 +1086,25 @@ void PCB_EDIT_FRAME::Edit_Gap( wxDC* DC, MODULE* Module )
gap_size = ReturnValueFromString( g_UserUnit, msg, GetScreen()->GetInternalUnits() );
/* Updating sizes of pads forming the gap. */
pad->m_Size.x = pad->m_Size.y = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
pad->m_Pos0.y = ZERO_LENGTH;
pad->m_Pos0.x = FROM_LEGACY_LU( oX = -( ( gap_size + TO_LEGACY_LU( pad->m_Size.x ) ) / 2 ) );
pad->m_Pos.x = TO_LEGACY_LU( pad->m_Pos0.x ) + Module->m_Pos.x;
pad->m_Pos.y = TO_LEGACY_LU( pad->m_Pos0.y ) + Module->m_Pos.y;
RotatePoint( &pad->m_Pos.x, &pad->m_Pos.y,
Module->m_Pos.x, Module->m_Pos.y, Module->m_Orient );
pad->m_Size.x() = pad->m_Size.y() = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
pad->m_Pos0.y() = ZERO_LENGTH;
pad->m_Pos0.x() = FROM_LEGACY_LU( oX = -( ( gap_size + TO_LEGACY_LU( pad->m_Size.x() ) ) / 2 ) );
pad->m_Pos.x() = pad->m_Pos0.x() + FROM_LEGACY_LU( Module->m_Pos.x );
pad->m_Pos.y() = pad->m_Pos0.y() + FROM_LEGACY_LU( Module->m_Pos.y );
next_pad->m_Size.x = next_pad->m_Size.y = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
next_pad->m_Pos0.y = ZERO_LENGTH;
next_pad->m_Pos0.x = FROM_LEGACY_LU( oX + gap_size + TO_LEGACY_LU( next_pad->m_Size.x ) );
next_pad->m_Pos.x = TO_LEGACY_LU( next_pad->m_Pos0.x ) + Module->m_Pos.x;
next_pad->m_Pos.y = TO_LEGACY_LU( next_pad->m_Pos0.y ) + Module->m_Pos.y;
RotatePoint( &next_pad->m_Pos.x, &next_pad->m_Pos.y,
wxPoint pos = TO_LEGACY_LU_WXP( pad->m_Pos );
RotatePoint( &pos.x, &pos.y,
Module->m_Pos.x, Module->m_Pos.y, Module->m_Orient );
pad->m_Pos = FROM_LEGACY_LU_VEC( pos );
next_pad->m_Size.x() = next_pad->m_Size.y() = FROM_LEGACY_LU( GetBoard()->GetCurrentTrackWidth() );
next_pad->m_Pos0.y() = ZERO_LENGTH;
next_pad->m_Pos0.x() = FROM_LEGACY_LU( oX + gap_size + TO_LEGACY_LU( next_pad->m_Size.x() ) );
next_pad->m_Pos.x() = next_pad->m_Pos0.x() + FROM_LEGACY_LU( Module->m_Pos.x );
next_pad->m_Pos.y() = next_pad->m_Pos0.y() + FROM_LEGACY_LU( Module->m_Pos.y );
pos = TO_LEGACY_LU_WXP( next_pad->m_Pos );
RotatePoint( &pos.x, &pos.y,
Module->m_Pos.x, Module->m_Pos.y, Module->m_Orient );
next_pad->m_Pos = FROM_LEGACY_LU_VEC( pos );
Module->Draw( DrawPanel, DC, GR_OR );
}

View File

@ -217,16 +217,25 @@ PARAM_CFG_ARRAY& PCB_EDIT_FRAME::GetProjectFileParameters()
m_projectFileParams.push_back( new PARAM_CFG_LIBNAME_LIST( wxT( "LibName" ),
&g_LibraryNames,
GROUPLIB ) );
#ifdef KICAD_NANOMETRE
//#ifdef KICAD_NANOMETRE
/* TODO: something should be done here!!! */
#else
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDrlX" ), &g_Pad_Master.m_Drill.x,
320, 0, 0x7FFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimH" ), &g_Pad_Master.m_Size.x,
550, 0, 0x7FFF ) );
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "PadDimV" ), &g_Pad_Master.m_Size.y,
550, 0, 0x7FFF ) );
#endif
//#else
m_projectFileParams.push_back( new PARAM_CFG_LENGTH_PCB( wxT( "PadDrlX" ),
&g_Pad_Master.m_Drill.x(),
FROM_LEGACY_LU( 320 ),
ZERO_LENGTH,
FROM_LEGACY_LU( 0x7FFF ) ) );
m_projectFileParams.push_back( new PARAM_CFG_LENGTH_PCB( wxT( "PadDimH" ),
&g_Pad_Master.m_Size.x(),
FROM_LEGACY_LU( 550 ),
ZERO_LENGTH,
FROM_LEGACY_LU( 0x7FFF ) ) );
m_projectFileParams.push_back( new PARAM_CFG_LENGTH_PCB( wxT( "PadDimV" ),
&g_Pad_Master.m_Size.y(),
FROM_LEGACY_LU( 550 ),
ZERO_LENGTH,
FROM_LEGACY_LU( 0x7FFF ) ) );
//#endif
m_projectFileParams.push_back( new PARAM_CFG_INT( wxT( "BoardThickness" ),
&boardDesignSettings.m_BoardThickness,
630, 0, 0xFFFF ) );

View File

@ -97,7 +97,7 @@ void PCB_BASE_FRAME::PlotSilkScreen( PLOTTER* plotter, int aLayerMask, GRTraceMo
switch( pad->m_PadShape & 0x7F )
{
case PAD_CIRCLE:
plotter->flash_pad_circle( shape_pos, TO_LEGACY_LU( pad->m_Size.x ), FILAIRE );
plotter->flash_pad_circle( shape_pos, TO_LEGACY_LU( pad->m_Size.x() ), FILAIRE );
break;
case PAD_OVAL:
@ -840,8 +840,8 @@ void PCB_BASE_FRAME::Plot_Standard_Layer( PLOTTER* aPlotter,
break;
}
size.x = TO_LEGACY_LU( pad->m_Size.x ) + ( 2 * margin.x );
size.y = TO_LEGACY_LU( pad->m_Size.y ) + ( 2 * margin.y );
size.x = TO_LEGACY_LU( pad->m_Size.x() ) + ( 2 * margin.x );
size.y = TO_LEGACY_LU( pad->m_Size.y() ) + ( 2 * margin.y );
/* Don't draw a null size item : */
if( size.x <= 0 || size.y <= 0 )
@ -851,8 +851,8 @@ void PCB_BASE_FRAME::Plot_Standard_Layer( PLOTTER* aPlotter,
{
case PAD_CIRCLE:
if( aSkipNPTH_Pads &&
( pad->m_Size.x == pad->m_Drill.x ) &&
( pad->m_Size.y == pad->m_Drill.y ) &&
( pad->m_Size.x() == pad->m_Drill.x() ) &&
( pad->m_Size.y() == pad->m_Drill.y() ) &&
(pad->m_Attribut == PAD_HOLE_NOT_PLATED) )
break;
@ -861,8 +861,8 @@ void PCB_BASE_FRAME::Plot_Standard_Layer( PLOTTER* aPlotter,
case PAD_OVAL:
if( aSkipNPTH_Pads &&
(pad->m_Size.x == pad->m_Drill.x ) &&
(pad->m_Size.y == pad->m_Drill.y ) &&
(pad->m_Size.x() == pad->m_Drill.x() ) &&
(pad->m_Size.y() == pad->m_Drill.y() ) &&
(pad->m_Attribut == PAD_HOLE_NOT_PLATED) )
break;
@ -1018,21 +1018,21 @@ void PCB_BASE_FRAME::PlotDrillMark( PLOTTER* aPlotter,
{
for( PtPad = Module->m_Pads; PtPad != NULL; PtPad = PtPad->Next() )
{
if( PtPad->m_Drill.x == ZERO_LENGTH )
if( PtPad->m_Drill.x() == ZERO_LENGTH )
continue;
// Output hole shapes:
pos = PtPad->m_Pos;
pos = TO_LEGACY_LU_WXP( PtPad->m_Pos );
if( PtPad->m_DrillShape == PAD_OVAL )
{
diam.x = TO_LEGACY_LU( PtPad->m_Drill.x );
diam.y = TO_LEGACY_LU( PtPad->m_Drill.y );
diam.x = TO_LEGACY_LU( PtPad->m_Drill.x() );
diam.y = TO_LEGACY_LU( PtPad->m_Drill.y() );
aPlotter->flash_pad_oval( pos, diam, PtPad->m_Orient, aTraceMode );
}
else
{
diam.x = aSmallDrillShape ? SMALL_DRILL : TO_LEGACY_LU( PtPad->m_Drill.x );
diam.x = aSmallDrillShape ? SMALL_DRILL : TO_LEGACY_LU( PtPad->m_Drill.x() );
aPlotter->flash_pad_circle( pos, diam.x, aTraceMode );
}
}

View File

@ -352,17 +352,17 @@ static void Print_Module( EDA_DRAW_PANEL* aPanel, wxDC* aDC, MODULE* aModule,
// Manage hole according to the print drill option
wxSize drill_tmp;
drill_tmp.x = TO_LEGACY_LU( pt_pad->m_Drill.x );
drill_tmp.y = TO_LEGACY_LU( pt_pad->m_Drill.y );
drill_tmp.x = TO_LEGACY_LU( pt_pad->m_Drill.x() );
drill_tmp.y = TO_LEGACY_LU( pt_pad->m_Drill.y() );
switch ( aDrillShapeOpt )
{
case PRINT_PARAMETERS::NO_DRILL_SHAPE:
pt_pad->m_Drill = VECTOR_PCB(ZERO_LENGTH, ZERO_LENGTH); //wxSize(0,0);
pt_pad->m_Drill = VECTOR_PCB::fromXY(ZERO_LENGTH, ZERO_LENGTH); //wxSize(0,0);
break;
case PRINT_PARAMETERS::SMALL_DRILL_SHAPE:
pt_pad->m_Drill.x = MIN(FROM_LEGACY_LU( SMALL_DRILL ),pt_pad->m_Drill.x );
pt_pad->m_Drill.y = MIN(FROM_LEGACY_LU( SMALL_DRILL ),pt_pad->m_Drill.y );
pt_pad->m_Drill.x() = min( FROM_LEGACY_LU( SMALL_DRILL ),pt_pad->m_Drill.x() );
pt_pad->m_Drill.y() = min( FROM_LEGACY_LU( SMALL_DRILL ),pt_pad->m_Drill.y() );
break;
case PRINT_PARAMETERS::FULL_DRILL_SHAPE:
// Do nothing
@ -370,8 +370,8 @@ static void Print_Module( EDA_DRAW_PANEL* aPanel, wxDC* aDC, MODULE* aModule,
}
pt_pad->Draw( aPanel, aDC, aDraw_mode );
pt_pad->m_Drill.x = FROM_LEGACY_LU( drill_tmp.x );
pt_pad->m_Drill.y = FROM_LEGACY_LU( drill_tmp.y );
pt_pad->m_Drill.x() = FROM_LEGACY_LU( drill_tmp.x );
pt_pad->m_Drill.y() = FROM_LEGACY_LU( drill_tmp.y );
}
/* Print footprint graphic shapes */

View File

@ -107,8 +107,8 @@ int MIN_SPAN_TREE_PADS::GetWeight( int aItem1, int aItem2 )
if( pad1 == pad2 )
return 0;
int weight = abs( pad2->m_Pos.x - pad1->m_Pos.x ) +
abs( pad2->m_Pos.y - pad1->m_Pos.y );
int weight = TO_LEGACY_LU( abs( pad2->m_Pos.x() - pad1->m_Pos.x() ) +
abs( pad2->m_Pos.y() - pad1->m_Pos.y() ) );
return weight + 1;
}
@ -667,7 +667,7 @@ void PCB_BASE_FRAME::build_ratsnest_module( MODULE* aModule )
local_rats.m_Lenght = INT_MAX;
}
pad_pos = pad_ref->m_Pos - g_Offset_Module;
pad_pos = TO_LEGACY_LU_WXP( pad_ref->m_Pos ) - g_Offset_Module;
// Search the nearest external pad of this current pad
for( unsigned jj = pads_module_count; jj < localPadList.size(); jj++ )
@ -681,8 +681,8 @@ void PCB_BASE_FRAME::build_ratsnest_module( MODULE* aModule )
if( pad_externe->GetNet() > pad_ref->GetNet() ) // pads are sorted by net code
break;
distance = abs( pad_externe->m_Pos.x - pad_pos.x ) +
abs( pad_externe->m_Pos.y - pad_pos.y );
distance = abs( TO_LEGACY_LU( pad_externe->m_Pos.x() ) - pad_pos.x ) +
abs( TO_LEGACY_LU( pad_externe->m_Pos.y() ) - pad_pos.y );
if( distance < local_rats.m_Lenght )
{
@ -724,8 +724,8 @@ void PCB_BASE_FRAME::TraceModuleRatsNest( wxDC* DC )
else
{
g_ColorsSettings.SetItemColor(RATSNEST_VISIBLE, tmpcolor);
wxPoint tmp = rats->m_PadStart->m_Pos;
rats->m_PadStart->m_Pos -= g_Offset_Module;
VECTOR_PCB tmp = rats->m_PadStart->m_Pos;
rats->m_PadStart->m_Pos -= FROM_LEGACY_LU_VEC( g_Offset_Module );
rats->Draw( DrawPanel, DC, GR_XOR, wxPoint( 0, 0 ) );
rats->m_PadStart->m_Pos = tmp;
}
@ -827,7 +827,7 @@ void PCB_BASE_FRAME::BuildAirWiresTargetsList( BOARD_CONNECTED_ITEM* aItemRef,
continue;
if( !pad->GetSubNet() || (pad->GetSubNet() != subnet) )
s_TargetsLocations.push_back( pad->m_Pos );
s_TargetsLocations.push_back( TO_LEGACY_LU_WXP( pad->m_Pos ) );
}
// Create a list of tracks ends candidates, not already connected to the

View File

@ -464,8 +464,8 @@ static int Autoroute_One_Track( PCB_EDIT_FRAME* pcbframe,
+ pcbframe->GetBoard()->m_BoundaryBox.m_Pos.x;
int cY = ( Board.m_GridRouting * row_source )
+ pcbframe->GetBoard()->m_BoundaryBox.m_Pos.y;
int dx = TO_LEGACY_LU( pt_cur_ch->m_PadStart->m_Size.x / 2 );
int dy = TO_LEGACY_LU( pt_cur_ch->m_PadStart->m_Size.y / 2 );
int dx = TO_LEGACY_LU( pt_cur_ch->m_PadStart->m_Size.x() / 2 );
int dy = TO_LEGACY_LU( pt_cur_ch->m_PadStart->m_Size.y() / 2 );
int px = pt_cur_ch->m_PadStart->GetPosition().x;
int py = pt_cur_ch->m_PadStart->GetPosition().y;
@ -479,8 +479,8 @@ static int Autoroute_One_Track( PCB_EDIT_FRAME* pcbframe,
+ pcbframe->GetBoard()->m_BoundaryBox.m_Pos.x;
cY = ( Board.m_GridRouting * row_target )
+ pcbframe->GetBoard()->m_BoundaryBox.m_Pos.y;
dx = TO_LEGACY_LU( pt_cur_ch->m_PadEnd->m_Size.x / 2 );
dy = TO_LEGACY_LU( pt_cur_ch->m_PadEnd->m_Size.y / 2 );
dx = TO_LEGACY_LU( pt_cur_ch->m_PadEnd->m_Size.x() / 2 );
dy = TO_LEGACY_LU( pt_cur_ch->m_PadEnd->m_Size.y() / 2 );
px = pt_cur_ch->m_PadEnd->GetPosition().x;
py = pt_cur_ch->m_PadEnd->GetPosition().y;

View File

@ -250,7 +250,7 @@ static bool isRoundKeepout( D_PAD* aPad )
{
if( aPad->m_PadShape==PAD_CIRCLE )
{
if( aPad->m_Drill.x >= aPad->m_Size.x )
if( aPad->m_Drill.x() >= aPad->m_Size.x() )
return true;
if( (aPad->m_layerMask & ALL_CU_LAYERS) == 0 )
@ -321,11 +321,11 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
POINT dsnOffset;
if( aPad->m_Offset.x != ZERO_LENGTH || aPad->m_Offset.y != ZERO_LENGTH )
if( aPad->m_Offset.x() != ZERO_LENGTH || aPad->m_Offset.y() != ZERO_LENGTH )
{
char offsetTxt[64]; /// @BUG !!!Unsafe
wxPoint offset( TO_LEGACY_LU( aPad->m_Offset.x ), TO_LEGACY_LU( aPad->m_Offset.y ) );
wxPoint offset( TO_LEGACY_LU( aPad->m_Offset.x() ), TO_LEGACY_LU( aPad->m_Offset.y() ) );
dsnOffset = mapPt( offset );
@ -341,7 +341,7 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
default:
case PAD_CIRCLE:
{
double diameter = scale( TO_LEGACY_LU( aPad->m_Size.x ) );
double diameter = scale( TO_LEGACY_LU( aPad->m_Size.x() ) );
for( int ndx=0; ndx<reportedLayers; ++ndx )
{
@ -357,7 +357,7 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
}
snprintf( name, sizeof(name), "Round%sPad_%.6g_mil",
uniqifier.c_str(), scale(TO_LEGACY_LU( aPad->m_Size.x ) ) );
uniqifier.c_str(), scale(TO_LEGACY_LU( aPad->m_Size.x() ) ) );
name[ sizeof(name)-1 ] = 0;
padstack->SetPadstackId( name );
@ -366,8 +366,8 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
case PAD_RECT:
{
double dx = scale( TO_LEGACY_LU( aPad->m_Size.x ) ) / 2.0;
double dy = scale( TO_LEGACY_LU( aPad->m_Size.y ) ) / 2.0;
double dx = scale( TO_LEGACY_LU( aPad->m_Size.x() ) ) / 2.0;
double dy = scale( TO_LEGACY_LU( aPad->m_Size.y() ) ) / 2.0;
POINT lowerLeft( -dx, -dy );
POINT upperRight( dx, dy );
@ -388,7 +388,7 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
}
snprintf( name, sizeof(name), "Rect%sPad_%.6gx%.6g_mil",
uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x ) ), scale( TO_LEGACY_LU( aPad->m_Size.y ) ) );
uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x() ) ), scale( TO_LEGACY_LU( aPad->m_Size.y() ) ) );
name[ sizeof(name)-1 ] = 0;
padstack->SetPadstackId( name );
@ -397,8 +397,8 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
case PAD_OVAL:
{
double dx = scale( TO_LEGACY_LU( aPad->m_Size.x ) ) / 2.0;
double dy = scale( TO_LEGACY_LU( aPad->m_Size.y ) ) / 2.0;
double dx = scale( TO_LEGACY_LU( aPad->m_Size.x() ) ) / 2.0;
double dy = scale( TO_LEGACY_LU( aPad->m_Size.y() ) ) / 2.0;
double dr = dx - dy;
double radius;
POINT start;
@ -436,7 +436,7 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
}
snprintf( name, sizeof(name), "Oval%sPad_%.6gx%.6g_mil",
uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x ) ), scale( TO_LEGACY_LU( aPad->m_Size.y ) ) );
uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x() ) ), scale( TO_LEGACY_LU( aPad->m_Size.y() ) ) );
name[ sizeof(name)-1 ] = 0;
padstack->SetPadstackId( name );
@ -445,11 +445,11 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
case PAD_TRAPEZOID:
{
double dx = scale( TO_LEGACY_LU( aPad->m_Size.x ) ) / 2.0;
double dy = scale( TO_LEGACY_LU( aPad->m_Size.y ) ) / 2.0;
double dx = scale( TO_LEGACY_LU( aPad->m_Size.x() ) ) / 2.0;
double dy = scale( TO_LEGACY_LU( aPad->m_Size.y() ) ) / 2.0;
double ddx = scale( TO_LEGACY_LU( aPad->m_DeltaSize.x ) ) / 2.0;
double ddy = scale( TO_LEGACY_LU( aPad->m_DeltaSize.y ) ) / 2.0;
double ddx = scale( TO_LEGACY_LU( aPad->m_DeltaSize.x() ) ) / 2.0;
double ddy = scale( TO_LEGACY_LU( aPad->m_DeltaSize.y() ) ) / 2.0;
// see class_pad_draw_functions.cpp which draws the trapezoid pad
POINT lowerLeft( -dx - ddy, -dy - ddx );
@ -483,11 +483,11 @@ PADSTACK* SPECCTRA_DB::makePADSTACK( BOARD* aBoard, D_PAD* aPad )
// this string _must_ be unique for a given physical shape
snprintf( name, sizeof(name), "Trapz%sPad_%.6gx%.6g_%c%.6gx%c%.6g_mil",
uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x ) ), scale( TO_LEGACY_LU( aPad->m_Size.y ) ),
aPad->m_DeltaSize.x < ZERO_LENGTH ? 'n' : 'p',
abs( scale( TO_LEGACY_LU( aPad->m_DeltaSize.x ) )),
aPad->m_DeltaSize.y < ZERO_LENGTH ? 'n' : 'p',
abs( scale( TO_LEGACY_LU( aPad->m_DeltaSize.y ) ))
uniqifier.c_str(), scale( TO_LEGACY_LU( aPad->m_Size.x() ) ), scale( TO_LEGACY_LU( aPad->m_Size.y() ) ),
aPad->m_DeltaSize.x() < ZERO_LENGTH ? 'n' : 'p',
fabs( scale( TO_LEGACY_LU( aPad->m_DeltaSize.x() ) )),
aPad->m_DeltaSize.y() < ZERO_LENGTH ? 'n' : 'p',
fabs( scale( TO_LEGACY_LU( aPad->m_DeltaSize.y() ) ))
);
name[ sizeof(name)-1 ] = 0;
@ -527,7 +527,7 @@ IMAGE* SPECCTRA_DB::makeIMAGE( BOARD* aBoard, MODULE* aModule )
// see if this pad is a through hole with no copper on its perimeter
if( isRoundKeepout( pad ) )
{
double diameter = scale( TO_LEGACY_LU( pad->m_Drill.x ) );
double diameter = scale( TO_LEGACY_LU( pad->m_Drill.x() ) );
POINT vertex = mapPt( TO_LEGACY_LU_WXP( pad->m_Pos0 ) );
int layerCount = aBoard->GetCopperLayerCount();

View File

@ -201,7 +201,7 @@ void ZONE_CONTAINER::AddClearanceAreasPolygonsToPolysList( BOARD* aPcb )
* inside the board (in fact inside the hole. Some photo diodes and Leds are
* like this)
*/
if( (pad->m_Drill.x == ZERO_LENGTH) && (pad->m_Drill.y == ZERO_LENGTH) )
if( (pad->m_Drill.x() == ZERO_LENGTH) && (pad->m_Drill.y() == ZERO_LENGTH) )
continue;
// Use a dummy pad to calculate a hole shape that have the same dimension as

View File

@ -68,15 +68,15 @@ void BuildUnconnectedThermalStubsPolygonList( std::vector<CPolyPt>& aCornerBuffe
// Thermal bridges are like a segment from a starting point inside the pad
// to an ending point outside the pad
wxPoint startpoint, endpoint;
endpoint.x = ( TO_LEGACY_LU( pad->m_Size.x / 2 ) ) + aZone->m_ThermalReliefGapValue;
endpoint.y = ( TO_LEGACY_LU( pad->m_Size.y / 2 ) ) + aZone->m_ThermalReliefGapValue;
endpoint.x = ( TO_LEGACY_LU( pad->m_Size.x() / 2 ) ) + aZone->m_ThermalReliefGapValue;
endpoint.y = ( TO_LEGACY_LU( pad->m_Size.y() / 2 ) ) + aZone->m_ThermalReliefGapValue;
int copperThickness = aZone->m_ThermalReliefCopperBridgeValue - aZone->m_ZoneMinThickness;
if( copperThickness < 0 )
copperThickness = 0;
startpoint.x = min( TO_LEGACY_LU( pad->m_Size.x ), copperThickness );
startpoint.y = min( TO_LEGACY_LU( pad->m_Size.y ), copperThickness );
startpoint.x = min( TO_LEGACY_LU( pad->m_Size.x() ), copperThickness );
startpoint.y = min( TO_LEGACY_LU( pad->m_Size.y() ), copperThickness );
startpoint.x /= 2;
startpoint.y /= 2;

View File

@ -40,7 +40,7 @@ void ZONE_CONTAINER::Test_For_Copper_Island_And_Remove_Insulated_Islands( BOARD
if( pad->GetNet() != GetNet() )
continue;
ListPointsCandidates.push_back( pad->m_Pos );
ListPointsCandidates.push_back( TO_LEGACY_LU_WXP( pad->m_Pos ) );
}
}

View File

@ -111,7 +111,7 @@ void BOARD::Test_Connections_To_Copper_Areas( int aNetcode )
if( item->Type() == PCB_PAD_T )
{
pos1 = pos2 = ( (D_PAD*) item )->m_Pos;
pos1 = pos2 = TO_LEGACY_LU_WXP( ( (D_PAD*) item )->m_Pos ); /// @BUG Unsafe type conversion
}
else if( item->Type() == PCB_VIA_T )
{

View File

@ -1,8 +1,8 @@
// math stuff for graphics, from FreePCB
#ifndef abs
/*#ifndef abs
#define abs(x) (((x) >=0) ? (x) : (-(x)))
#endif
#endif*/
typedef struct PointTag

View File

@ -73,6 +73,8 @@ static inline int floordiv( int a, int n )
/* Note: the following work for integers and other numeric types. */
/* those are bad programming practice because of several issues with
overloading and integer limits
#undef sign
#undef abs
#undef min
@ -84,6 +86,79 @@ static inline int floordiv( int a, int n )
#define min( a, b ) ( (a)<(b) ? (a) : (b) )
#define max( a, b ) ( (a)>(b) ? (a) : (b) )
#define sq( a ) ( (a) * (a) )
#define cu( a ) ( (a) * (a) * (a) )
#define cu( a ) ( (a) * (a) * (a) )*/
// these functions better than macros because they do not cause double evaluation.
static inline int sign( int x )
{
return (0 < x) - (x < 0);
}
static inline int sign( long x )
{
return (0 < x) - (x < 0);
}
static inline int sign( double x )
{
return (0.0 < x) - (x < 0.0);
}
/*static inline int abs( int x ) is not required because exist in stdlib.h */
static inline long abs( long x )
{
return x < 0? -x : x;
}
static inline int max( int x, int y )
{
return x < y? y : x;
}
static inline long max( long x, long y )
{
return x < y? y : x;
}
static inline int min( int x, int y )
{
return x < y? x : y;
}
static inline long min( long x, long y )
{
return x < y? x : y;
}
static inline int sq( int x )
{
return x * x;
}
static inline long sq( long x )
{
return x * x;
}
static inline double sq( double x )
{
return x * x;
}
static inline int cu( int x )
{
return x * x * x;
}
static inline long cu( long x )
{
return x * x * x;
}
static inline double cu( double x )
{
return x * x * x;
}
#endif /* AUXILIARY_H */

View File

@ -278,7 +278,7 @@ void render_curveto( render_t* rm,
* occur at an endpoint. */
dd0 = sq( x1 - 2 * x2 + x3 ) + sq( y1 - 2 * y2 + y3 );
dd1 = sq( x2 - 2 * x3 + x4 ) + sq( y2 - 2 * y3 + y4 );
dd = 6 * sqrt( max( dd0, dd1 ) );
dd = 6 * sqrt( fmax( dd0, dd1 ) );
e2 = 8 * delta <= dd ? 8 * delta / dd : 1;
epsilon = sqrt( e2 ); /* necessary interval size */