Modular-Kicad milestone B), minor portions:

*) KIWAY_PLAYER::IsModal() is now a retained state, controlled by SetModal()

*) Fully re-work the KIWAY_PLAYER::ShowModal() to use a nested event loop.

*) Add support to DIALOG_SHIM for a "quasi-modal" dialog presentation and mode.
   See top of dialog_shim.cpp about that for benefits and need.

*) You can now pick footprint from the schematic component field dialog, although
   if you do this before you open the BOARD, you will only get the global footprint
   libraries, not also the project specific ones.  Opening the BOARD first avoids this
   problem.

This is the first example of cross KIFACE invocation, it is also the first
instance of using a TOP_FRAME other than FRAME_PCB as the first thing. It works,
but it's missing support for opening the project specific table because
historically the FRAME_PCB did that. This is now starting to expose all the near
term needs for KIWAY_PLAYER <-> PROJECT interaction, independence and out of
sequence usage.

A fix for this will be coming in a few days.

However it mostly starts to show why the KIWAY is terribly useful and important.
This commit is contained in:
Dick Hollenbeck 2014-05-04 13:22:27 -05:00
parent 85c5aa22c6
commit fef168aaed
13 changed files with 245 additions and 71 deletions

View File

@ -151,6 +151,17 @@ bool EDA_BASE_FRAME::ProcessEvent( wxEvent& aEvent )
}
bool EDA_BASE_FRAME::Enable( bool enable )
{
#if defined(DEBUG)
const char* type_id = typeid( *this ).name();
printf( "wxFrame %s: %s\n", type_id, enable ? "enabled" : "disabled" );
#endif
return wxFrame::Enable( enable );
}
void EDA_BASE_FRAME::onAutoSaveTimer( wxTimerEvent& aEvent )
{
if( !doAutoSave() )

View File

@ -25,17 +25,45 @@
#include <dialog_shim.h>
#include <kiway_player.h>
#include <wx/evtloop.h>
/*
Quasi-Modal Mode Explained:
The gtk calls in wxDialog::ShowModal() cause event routing problems if that
modal dialog then tries to use KIWAY_PLAYER::ShowModal(). The latter shows up
and mostly works but does not respond to the window decoration close button.
There is no way to get around this without reversing the gtk calls temporarily.
Quasi-Modal mode is our own almost modal mode which disables only the parent
of the DIALOG_SHIM, leaving other frames operable and while staying captured in the
nested event loop. This avoids the gtk calls and leaves event routing pure
and sufficient to operate the KIWAY_PLAYER::ShowModal() properly. When using
ShowQuasiModal() you have to use EndQuasiModal() in your dialogs and not
EndModal(). There is also IsQuasiModal() but its value can only be true
when the nested event loop is active. Do not mix the modal and quasi-modal
functions. Use one set or the other.
You might find this behavior preferable over a pure modal mode, and it was said
that only the Mac has this natively, but now other platforms have something
similar. You CAN use it anywhere for any dialog. But you MUST use it when
you want to use KIWAY_PLAYER::ShowModal() from a dialog event.
*/
DIALOG_SHIM::DIALOG_SHIM( wxWindow* aParent, wxWindowID id, const wxString& title,
const wxPoint& pos, const wxSize& size, long style, const wxString& name ) :
wxDialog( aParent, id, title, pos, size, style, name ),
KIWAY_HOLDER( 0 )
KIWAY_HOLDER( 0 ),
m_qmodal_loop( 0 ),
m_qmodal_showing( false )
{
// pray that aParent is either a KIWAY_PLAYER or DIALOG_SHIM derivation.
KIWAY_HOLDER* h = dynamic_cast<KIWAY_HOLDER*>( aParent );
wxASSERT_MSG( h,
wxT( "DIALOG_SHIM's parent not derived from KIWAY_PLAYER nor DIALOG_SHIM" ) );
wxT( "DIALOG_SHIM's parent is NULL or not derived from KIWAY_PLAYER nor DIALOG_SHIM" ) );
if( h )
SetKiway( this, &h->Kiway() );
@ -46,6 +74,14 @@ DIALOG_SHIM::DIALOG_SHIM( wxWindow* aParent, wxWindowID id, const wxString& titl
}
DIALOG_SHIM::~DIALOG_SHIM()
{
// if the dialog is quasi-modal, this will end its event loop
if( IsQuasiModal() )
EndQuasiModal( wxID_CANCEL );
}
// our hashtable is an implementation secret, don't need or want it in a header file
#include <hashtables.h>
#include <base_struct.h> // EDA_RECT
@ -92,6 +128,90 @@ bool DIALOG_SHIM::Show( bool show )
}
bool DIALOG_SHIM::Enable( bool enable )
{
#if defined(DEBUG)
const char* type_id = typeid( *this ).name();
printf( "wxDialog %s: %s\n", type_id, enable ? "enabled" : "disabled" );
#endif
return wxDialog::Enable( enable );
}
int DIALOG_SHIM::ShowQuasiModal()
{
// toggle a window's "enable" status to disabled, then enabled on exit.
// exception safe.
struct ENABLE_DISABLE
{
wxWindow* m_win;
ENABLE_DISABLE( wxWindow* aWindow ) : m_win( aWindow ) { if( m_win ) m_win->Disable(); }
~ENABLE_DISABLE() { if( m_win ) m_win->Enable(); }
};
// This is an exception safe way to zero a pointer before returning.
// Yes, even though DismissModal() clears this first normally, this is
// here in case there's an exception before the dialog is dismissed.
struct NULLER
{
void*& m_what;
NULLER( void*& aPtr ) : m_what( aPtr ) {}
~NULLER() { m_what = 0; } // indeed, set it to NULL on destruction
} clear_this( (void*&) m_qmodal_loop );
// release the mouse if it's currently captured as the window having it
// will be disabled when this dialog is shown -- but will still keep the
// capture making it impossible to do anything in the modal dialog itself
wxWindow* win = wxWindow::GetCapture();
if( win )
win->ReleaseMouse();
wxWindow* parent = GetParentForModalDialog();
ENABLE_DISABLE toggle( parent );
Show( true );
m_qmodal_showing = true;
wxGUIEventLoop event_loop;
wxEventLoopActivator event_loop_stacker( &event_loop );
m_qmodal_loop = &event_loop;
event_loop.Run();
if( toggle.m_win ) // let's focus back on the parent window
toggle.m_win->SetFocus();
return GetReturnCode();
}
void DIALOG_SHIM::EndQuasiModal( int retCode )
{
SetReturnCode( retCode );
if( !IsQuasiModal() )
{
wxFAIL_MSG( "either DIALOG_SHIM::EndQuasiModal called twice or ShowQuasiModal wasn't called" );
return;
}
m_qmodal_showing = false;
if( m_qmodal_loop )
{
m_qmodal_loop->Exit();
m_qmodal_loop = NULL;
}
Show( false );
}
#if DLGSHIM_USE_SETFOCUS
static bool findWindowRecursively( const wxWindowList& children, const wxWindow* wanted )
@ -113,7 +233,7 @@ static bool findWindowRecursively( const wxWindowList& children, const wxWindow*
}
static bool findWindowRecursively( const wxWindow* topmost, const wxWindow* wanted )
static bool findWindowReursively( const wxWindow* topmost, const wxWindow* wanted )
{
// wanted may be NULL and that is ok.

View File

@ -23,13 +23,14 @@
*/
#include <kiway_player.h>
#include <kiway_express.h>
#include <kiway.h>
#include <id.h>
#include <macros.h>
#include <typeinfo>
#include <wx/utils.h>
#include <wx/evtloop.h>
BEGIN_EVENT_TABLE( KIWAY_PLAYER, EDA_BASE_FRAME )
@ -43,10 +44,10 @@ KIWAY_PLAYER::KIWAY_PLAYER( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrameType
long aStyle, const wxString& aWdoName ) :
EDA_BASE_FRAME( aParent, aFrameType, aTitle, aPos, aSize, aStyle, aWdoName ),
KIWAY_HOLDER( aKiway ),
m_modal_dismissed( 0 )
m_modal( false ),
m_modal_loop( 0 )
{
DBG( printf("KIWAY_EXPRESS::wxEVENT_ID:%d\n", KIWAY_EXPRESS::wxEVENT_ID );)
//Connect( KIWAY_EXPRESS::wxEVENT_ID, wxKiwayExressHandler( KIWAY_PLAYER::kiway_express ) );
// DBG( printf("KIWAY_EXPRESS::wxEVENT_ID:%d\n", KIWAY_EXPRESS::wxEVENT_ID );)
}
@ -55,10 +56,10 @@ KIWAY_PLAYER::KIWAY_PLAYER( wxWindow* aParent, wxWindowID aId, const wxString& a
const wxString& aWdoName ) :
EDA_BASE_FRAME( aParent, (FRAME_T) aId, aTitle, aPos, aSize, aStyle, aWdoName ),
KIWAY_HOLDER( 0 ),
m_modal_dismissed( 0 )
m_modal( false ),
m_modal_loop( 0 )
{
DBG( printf("KIWAY_EXPRESS::wxEVENT_ID:%d\n", KIWAY_EXPRESS::wxEVENT_ID );)
//Connect( KIWAY_EXPRESS::wxEVENT_ID, wxKiwayExressHandler( KIWAY_PLAYER::kiway_express ) );
// DBG( printf("KIWAY_EXPRESS::wxEVENT_ID:%d\n", KIWAY_EXPRESS::wxEVENT_ID );)
}
@ -73,49 +74,54 @@ void KIWAY_PLAYER::KiwayMailIn( KIWAY_EXPRESS& aEvent )
bool KIWAY_PLAYER::ShowModal( wxString* aResult )
{
wxASSERT_MSG( IsModal(), "ShowModal() shouldn't be called on non-modal frame" );
/*
This function has a nice interface but an unsightly implementation.
Now it is encapsulated, making it easier to improve. I am not sure
a wxSemaphore was needed, especially since no blocking happens. It seems
like a volatile bool is sufficient.
This function has a nice interface but a necessarily unsightly implementation.
Now the implementation is encapsulated, localizing future changes.
It works in tandem with DismissModal(). But only ShowModal() is in the
vtable and therefore cross-module capable.
*/
volatile bool dismissed = false;
// This is an exception safe way to zero a pointer before returning.
// Yes, even though DismissModal() clears this first normally, this is
// here in case there's an exception before the dialog is dismissed.
struct NULLER
{
void*& m_what;
NULLER( void*& aPtr ) : m_what( aPtr ) {}
~NULLER() { m_what = 0; } // indeed, set it to NULL on destruction
} clear_this( (void*&) m_modal_loop );
// disable all frames except the modal one, re-enable on exit, exception safe.
// exception safe way to disable all frames except the modal one,
// re-enable on exit
wxWindowDisabler toggle( this );
m_modal_dismissed = &dismissed;
Show( true );
Raise();
// Wait for the one and only active frame to call DismissModal() from
// some concluding event.
while( !dismissed )
{
wxYield();
wxMilliSleep( 50 );
}
wxGUIEventLoop event_loop;
wxEventLoopActivator event_loop_stacker( &event_loop );
// no longer modal, not to mention that the pointer would be invalid outside this scope.
m_modal_dismissed = NULL;
m_modal_loop = &event_loop;
event_loop.Run();
if( aResult )
*aResult = m_modal_string;
DBG(printf( "~%s: aResult:'%s' ret:%d\n",
__func__, TO_UTF8( m_modal_string ), m_modal_ret_val );)
return m_modal_ret_val;
}
bool KIWAY_PLAYER::IsDismissed()
{
// if already dismissed, then m_modal_dismissed may be NULL, and if not,
// it can still be dismissed if the bool is true.
bool ret = !m_modal_dismissed || *m_modal_dismissed;
bool ret = !m_modal_loop;
DBG(printf( "%s: ret:%d\n", __func__, ret );)
return ret;
}
@ -126,8 +132,13 @@ void KIWAY_PLAYER::DismissModal( bool aRetVal, const wxString& aResult )
m_modal_ret_val = aRetVal;
m_modal_string = aResult;
if( m_modal_dismissed )
*m_modal_dismissed = true;
if( m_modal_loop )
{
m_modal_loop->Exit();
m_modal_loop = 0; // this marks it as dismissed.
}
Show( false );
}

View File

@ -148,10 +148,10 @@ void SCH_EDIT_FRAME::EditComponent( SCH_COMPONENT* aComponent )
// make sure the chipnameTextCtrl is wide enough to hold any unusually long chip names:
EnsureTextCtrlWidth( dlg->chipnameTextCtrl );
dlg->ShowModal();
dlg->ShowQuasiModal();
m_canvas->MoveCursorToCrossHair();
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->MoveCursorToCrossHair();
dlg->Destroy();
}
@ -214,7 +214,7 @@ void DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnListItemSelected( wxListEvent& event
void DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnCancelButtonClick( wxCommandEvent& event )
{
EndModal( 1 );
EndQuasiModal( 1 );
}
@ -379,7 +379,7 @@ void DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::OnOKButtonClick( wxCommandEvent& event
m_Parent->GetScreen()->TestDanglingEnds();
m_Parent->GetCanvas()->Refresh( true );
EndModal( 0 );
EndQuasiModal( 0 );
}
@ -436,23 +436,21 @@ void DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::deleteFieldButtonHandler( wxCommandEven
void DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::showButtonHandler( wxCommandEvent& event )
{
#if 1
#if 0
wxString datasheet_uri = fieldValueTextCtrl->GetValue();
::wxLaunchDefaultBrowser( datasheet_uri );
#else
unsigned fieldNdx = getSelectedFieldNdx();
/*
unsigned fieldNdx = getSelectedFieldNdx();
if( fieldNdx == DATASHEET )
{
wxString datasheet_uri = fieldValueTextCtrl->GetValue();
::wxLaunchDefaultBrowser( datasheet_uri );
}
else if( fieldNdx == FOOTPRINT )
*/
{
// pick a footprint
// pick a footprint using the footprint picker.
wxString fpid;
KIWAY_PLAYER* frame = Kiway().Player( FRAME_PCB_MODULE_VIEWER_MODAL, true );
@ -460,11 +458,11 @@ void DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::showButtonHandler( wxCommandEvent& even
if( frame->ShowModal( &fpid ) )
{
printf( "%s: %s\n", __func__, TO_UTF8( fpid ) );
fieldValueTextCtrl->SetValue( fpid );
}
frame->Show( false ); // keep the frame open, but hidden.
Raise();
frame->Destroy();
}
#endif
@ -764,7 +762,16 @@ void DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::copySelectedFieldToPanel()
fieldValueTextCtrl->SetValue( field.GetText() );
m_show_datasheet_button->Enable( fieldNdx == DATASHEET );
m_show_datasheet_button->Enable( fieldNdx == DATASHEET || fieldNdx == FOOTPRINT );
if( fieldNdx == DATASHEET )
m_show_datasheet_button->SetLabel( _( "Show in Browser" ) );
else if( fieldNdx == FOOTPRINT )
m_show_datasheet_button->SetLabel( _( "Assign Footprint" ) );
else
m_show_datasheet_button->SetLabel( wxEmptyString );
m_show_datasheet_button->Enable( fieldNdx == DATASHEET || fieldNdx == FOOTPRINT );
// For power symbols, the value is NOR editable, because value and pin
// name must be same and can be edited only in library editor
@ -1006,5 +1013,5 @@ void DIALOG_EDIT_COMPONENT_IN_SCHEMATIC::SetInitCmp( wxCommandEvent& event )
m_Parent->OnModify();
m_Cmp->Draw( m_Parent->GetCanvas(), &dc, wxPoint( 0, 0 ), GR_DEFAULT_DRAWMODE );
EndModal( 1 );
EndQuasiModal( 1 );
}

View File

@ -56,7 +56,7 @@
wxString SCH_BASE_FRAME::SelectComponentFromLibBrowser( LIB_ALIAS* aPreselectedAlias,
int* aUnit, int* aConvert )
{
// Close the any current non-modal Lib browser if open, and open a new one, in "modal" mode:
// Close any open non-modal Lib browser, and open a new one, in "modal" mode:
LIB_VIEW_FRAME* viewlibFrame = (LIB_VIEW_FRAME*) Kiway().Player( FRAME_SCH_VIEWER, false );
if( viewlibFrame )
viewlibFrame->Destroy();
@ -79,13 +79,14 @@ wxString SCH_BASE_FRAME::SelectComponentFromLibBrowser( LIB_ALIAS* aPreselectedA
wxString cmpname;
viewlibFrame->ShowModal( &cmpname );
if( viewlibFrame->ShowModal( &cmpname ) )
{
if( aUnit )
*aUnit = viewlibFrame->GetUnit();
if( aUnit )
*aUnit = viewlibFrame->GetUnit();
if( aConvert )
*aConvert = viewlibFrame->GetConvert();
if( aConvert )
*aConvert = viewlibFrame->GetConvert();
}
viewlibFrame->Destroy();

View File

@ -116,8 +116,7 @@ void LIB_VIEW_FRAME::ReCreateHToolbar()
_( "View component documents" ) );
m_mainToolBar->EnableTool( ID_LIBVIEW_VIEWDOC, false );
// if library browser is modal
if( m_Ident == FRAME_SCH_VIEWER_MODAL )
if( IsModal() )
{
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( ID_LIBVIEW_CMP_EXPORT_TO_SCHEMATIC,
@ -130,11 +129,11 @@ void LIB_VIEW_FRAME::ReCreateHToolbar()
m_mainToolBar->Realize();
}
if( (m_libraryName != wxEmptyString) && (m_entryName != wxEmptyString) )
if( m_libraryName.size() && m_entryName.size() )
{
lib = CMP_LIBRARY::FindLibrary( m_libraryName );
if( lib != NULL )
if( lib )
{
component = lib->FindComponent( m_entryName );
@ -161,7 +160,6 @@ void LIB_VIEW_FRAME::ReCreateHToolbar()
m_mainToolBar->ToggleTool( ID_LIBVIEW_DE_MORGAN_CONVERT_BUTT, false );
}
int parts_count = 1;
if( component )
@ -171,8 +169,7 @@ void LIB_VIEW_FRAME::ReCreateHToolbar()
for( ii = 0; ii < parts_count; ii++ )
{
wxString msg;
msg.Printf( _( "Unit %c" ), 'A' + ii );
wxString msg = wxString::Format( _( "Unit %c" ), 'A' + ii );
m_selpartBox->Append( msg );
}

View File

@ -103,6 +103,9 @@ LIB_VIEW_FRAME::LIB_VIEW_FRAME( KIWAY* aKiway, wxWindow* aParent, FRAME_T aFrame
{
wxASSERT( aFrameType==FRAME_SCH_VIEWER || aFrameType==FRAME_SCH_VIEWER_MODAL );
if( aFrameType == FRAME_SCH_VIEWER_MODAL )
SetModal( true );
wxAcceleratorTable table( ACCEL_TABLE_CNT, accels );
m_FrameName = GetLibViewerFrameName();

View File

@ -56,12 +56,26 @@ public:
const wxString& name = wxDialogNameStr
);
bool Show( bool show ); // overload wxDialog::Show
~DIALOG_SHIM();
int ShowQuasiModal(); // disable only the parent window, otherwise modal.
void EndQuasiModal( int retCode ); // End quasi-modal mode
bool IsQuasiModal() { return m_qmodal_showing; }
bool Show( bool show ); // override wxDialog::Show
bool Enable( bool enable ); // override wxDialog::Enable virtual
protected:
std::string m_hash_key; // alternate for class_map when classname re-used.
// variables for quasi-modal behavior support, only used by a few derivatives.
wxGUIEventLoop* m_qmodal_loop; // points to nested event_loop, NULL means not qmodal and dismissed
bool m_qmodal_showing;
#if DLGSHIM_USE_SETFOCUS
private:
void onInit( wxInitDialogEvent& aEvent );

View File

@ -87,6 +87,7 @@ private:
class KIWAY_EXPRESS;
class wxGUIEventLoop;
/**
* Class KIWAY_PLAYER
@ -194,7 +195,8 @@ public:
protected:
bool IsModal() { return m_modal_dismissed; }
bool IsModal() { return m_modal; }
void SetModal( bool IsModal ) { m_modal = IsModal; }
/**
* Function IsDismissed
@ -216,7 +218,8 @@ protected:
void language_change( wxCommandEvent& event );
// variables for modal behavior support, only used by a few derivatives.
volatile bool* m_modal_dismissed; // points to "dismissed state", NULL means not modal
bool m_modal; // true if frame is intended to be modal, not modeless
wxGUIEventLoop* m_modal_loop; // points to nested event_loop, NULL means not modal and dismissed
wxString m_modal_string;
bool m_modal_ret_val; // true if a selection was made

View File

@ -190,7 +190,9 @@ public:
* @warning If you override this function in a derived class, make sure you call
* down to this or the auto save feature will be disabled.
*/
bool ProcessEvent( wxEvent& aEvent ); // overload wxFrame::ProcessEvent()
bool ProcessEvent( wxEvent& aEvent ); // override wxFrame::ProcessEvent()
bool Enable( bool enable ); // override wxFrame::Enable virtual
void SetAutoSaveInterval( int aInterval ) { m_autoSaveInterval = aInterval; }

View File

@ -125,6 +125,9 @@ FOOTPRINT_WIZARD_FRAME::FOOTPRINT_WIZARD_FRAME( KIWAY* aKiway,
{
wxASSERT( aFrameType==FRAME_PCB_FOOTPRINT_WIZARD_MODAL );
if( aFrameType == FRAME_PCB_FOOTPRINT_WIZARD_MODAL )
SetModal( true );
wxAcceleratorTable table( ACCEL_TABLE_CNT, accels );
m_FrameName = FOOTPRINT_WIZARD_FRAME_NAME;
@ -641,7 +644,7 @@ void FOOTPRINT_WIZARD_FRAME::ReCreateHToolbar()
m_mainToolBar->AddTool( ID_ZOOM_PAGE, wxEmptyString,
KiBitmap( zoom_fit_in_page_xpm ), msg );
if( m_Ident == FRAME_PCB_FOOTPRINT_WIZARD_MODAL )
if( IsModal() )
{
// The library browser is called from a "load component" command
m_mainToolBar->AddSeparator();

View File

@ -129,6 +129,9 @@ FOOTPRINT_VIEWER_FRAME::FOOTPRINT_VIEWER_FRAME( KIWAY* aKiway, wxWindow* aParent
{
wxASSERT( aFrameType==FRAME_PCB_MODULE_VIEWER || aFrameType==FRAME_PCB_MODULE_VIEWER_MODAL );
if( aFrameType == FRAME_PCB_MODULE_VIEWER_MODAL )
SetModal( true );
wxAcceleratorTable table( DIM( accels ), accels );
m_FrameName = GetFootprintViewerFrameName();
@ -271,6 +274,7 @@ const wxChar* FOOTPRINT_VIEWER_FRAME::GetFootprintViewerFrameName()
void FOOTPRINT_VIEWER_FRAME::OnCloseWindow( wxCloseEvent& Event )
{
DBG(printf( "%s:\n", __func__ );)
if( IsModal() )
{
// Only dismiss a modal frame once, so that the return values set by
@ -278,7 +282,7 @@ void FOOTPRINT_VIEWER_FRAME::OnCloseWindow( wxCloseEvent& Event )
if( !IsDismissed() )
DismissModal( false );
// window will be destroyed by the calling function.
// window to be destroyed by the caller of KIWAY_PLAYER::ShowModal()
}
else
Destroy();

View File

@ -48,8 +48,7 @@ void FOOTPRINT_VIEWER_FRAME::ReCreateHToolbar()
{
m_mainToolBar = new wxAuiToolBar( this, wxID_ANY, wxDefaultPosition, wxDefaultSize,
wxAUI_TB_DEFAULT_STYLE
| wxAUI_TB_OVERFLOW
);
| wxAUI_TB_OVERFLOW );
// Set up toolbar
m_mainToolBar->AddTool( ID_MODVIEW_SELECT_LIB, wxEmptyString,
@ -95,8 +94,7 @@ void FOOTPRINT_VIEWER_FRAME::ReCreateHToolbar()
m_mainToolBar->AddTool( ID_ZOOM_PAGE, wxEmptyString,
KiBitmap( zoom_fit_in_page_xpm ), msg );
// Enable this tool only if the library browser is intended for modal use.
if( m_Ident == FRAME_PCB_MODULE_VIEWER_MODAL )
if( IsModal() )
{
m_mainToolBar->AddSeparator();
m_mainToolBar->AddTool( ID_MODVIEW_FOOTPRINT_EXPORT_TO_BOARD, wxEmptyString,