481c1592ae
STEP export: don't fail when can't construct a wire.
...
This can happen with very small shapes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17774
2024-04-17 01:35:00 +03:00
afcda88ee3
GERBER_JOBFILE_WRITER: use UTF8 encoding according to current specif.
...
Since 2020, non ASCII7 chars are encoded using UTF8 encoding.
A old but incorrect encoding was previously used.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17534
2024-03-22 10:09:47 +01:00
350687f355
STEP export: add location info to edge add failures.
...
(cherry picked from commit 800ff9ffb1
2024-03-19 23:11:20 +03:00
3a5a911012
STEP export: handle small segments connecting two arcs better.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17499
(cherry picked from commit 75037dd1d1
2024-03-19 22:55:17 +03:00
3e4ca3a1c7
Step exporter: workaround to fix issue for boards with main round outline
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17446
2024-03-19 16:13:13 +01:00
2ad3ccc4d8
Use 64-bit type to represent microseconds.
...
int and long are 32-bit on Windows, causing overflows.
(cherry picked from commit 85b1978408
2024-03-03 21:47:23 +03:00
63ffca0173
Step exporter: handle circles correctly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17137
2024-03-02 19:11:14 +01:00
0184dfb625
Do not call MakeShapes in AddCopperPolygonShapes when polyset is empty.
...
Ease of debugging.
2024-02-23 22:14:03 +03:00
b2c6e2de1f
Fix file not found msg contents for step resolving
2024-02-15 23:10:57 -05:00
8e6fe0eaf0
Gerbview settings: store option "Page Limits" in gerbview config.
...
Previously this appearance option in Layer Manager was not stored.
2024-02-14 11:21:55 +01:00
0d1945def7
Gerber drill file: do not flash oblong holes: they must be routed.
...
Fixes #16962
https://gitlab.com/kicad/code/kicad/-/issues/16962
2024-02-14 09:22:49 +01:00
da46a96623
Update a few strings based on new string freeze policy.
2024-02-05 15:49:57 +00:00
4a1245e85a
STEP: export copper plating for vias/pads (25 micrometers).
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16694
2024-02-02 00:29:03 +03:00
3ed196859f
STEP export: build a segment from last point for segment case as well.
...
https://gitlab.com/kicad/code/kicad/-/issues/16807
2024-01-29 19:59:41 +03:00
9a890cdba9
Kick the wildcards and file exts into a static class, export it from kicommon
2023-12-27 21:10:01 -05:00
9345b73af5
Don't crash when OCC fails to read a model and didn't open the doc.
2023-12-06 03:16:46 +03:00
f6bbf49800
Pcbnew, Excellon export: remove an useless line at end of file
2023-11-27 14:08:21 +01:00
5de55b8c4a
STEP export: fix a Bnd_BoundSortBox usage bug.
2023-11-21 14:21:12 +03:00
58b9d68084
STEP export: make use of footprint names instead of "SOLID".
...
Should help when importing into software that does deduplication
based on label names (e.g. SolidWorks).
2023-11-21 14:11:16 +03:00
f3fdfa73e6
STEP export: Do not set BRepBuilderAPI precision.
...
This caused issues when loading some STEP models.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15485
2023-11-21 00:47:38 +03:00
8dfad68d69
ADDED: option to optimize exported STEP files (disable pcurves)
2023-11-19 15:23:17 +03:00
1321c8c6af
STEP export: fix an issue when cutting circular holes in zones.
2023-11-19 14:04:31 +03:00
e5f688e865
Plot footprint edgecuts in PDF drill map file
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15247
2023-11-12 23:21:46 +00:00
8b3ac31646
Update GenCAD export to handle arbitrary outline
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15961
2023-10-27 12:46:37 -07:00
0345e0f75c
export gencad: clean and update old code. Should not really change the export.
...
- code refactory.
- allows export to be done from kicad-cli (kicad-cli code is not yet updated)
Need more work.
2023-10-27 20:03:12 +02:00
71475a4b56
Gerber place files: do not quote strings (fields, pad name, pad function ...)
...
Double quotes have no special meaning, so adding them modify the texts
2023-10-25 08:59:37 +02:00
254c8accc2
Remove some debugging messages.
2023-10-15 03:28:25 +03:00
62d959ed0e
Don't assume an error location for PAD::GetEffectivePolygon().
...
While ERROR_INSIDE was good for plotting, 3D generation, etc., it's
not good for generating router hulls.
Also reverts part of the change to always use polygons for PNS::SOLIDs. A single shape in a SHAPE_COMPOUND will be faster (and
more accurate).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/14898
2023-10-13 13:59:26 +01:00
0b136ae0df
CLI: Allow controlling layer order for multilayer plots
2023-10-11 00:18:58 +00:00
b4986030da
Include solder mask in STEP export stackup height.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15632
2023-10-07 10:28:38 +01:00
37df47a3e7
genDrillMapFile: reduce the pen width used to plot oval shapes (better look)
2023-10-04 15:47:47 +02:00
6b12a12b3e
On second thought rename PROJECT_PCBNEW to PROJECT_PCB
2023-09-27 23:15:54 -04:00
7e8b18035f
Eliminate the conditional pcbnew/cvpcb definition of PROJECT
2023-09-27 20:53:46 -04:00
11de95778b
Unwrap the FROM_UTF8 macro in favor of direct function
...
The extern just gets annoying to try to export the func later. We also yeet TO_UTF8 to string_utils.h for parity.
2023-09-09 00:10:57 -04:00
7505fd0f37
Profile can live in core
2023-09-07 07:47:01 -04:00
24e0a9455e
Fix a string in step exporter.
2023-09-04 06:45:25 +03:00
085485717c
Gerber place file: change DCode size of pads others than 1 or A1 to 0.1 mm
...
Previously it was a round shape 0.0 mm (allowed but not visible)
Gerber Format rev 2023-08 changed it to 0.1 mm (still a round shape)
2023-08-31 11:02:50 +02:00
f8dac43325
STEP export: add short segments as circles.
...
Because OCC can't connect two arcs together sometimes.
2023-08-29 23:58:25 +03:00
114ff054d3
STEP exporter: export track segments as thick segments with rounded end using arcs.
...
They are no longer exported as polygons.
Export time is slightly faster and file sizes slightly smaller.
Track arcs are still exported as polygons.
2023-08-27 19:37:41 +02:00
15f5a14217
Fix minor compil warnings
2023-08-27 11:11:08 +02:00
d193334a10
Add vrml export to cli
...
Roughcut as the vrml exporter needs some loving
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15472
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13952
2023-08-24 20:39:21 -04:00
f842e6ac7a
STEP: export arcs in board contours as curves, not polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13825
2023-08-24 21:53:53 +03:00
b8ce97b532
STEP export: fix circles.
2023-08-24 14:57:15 +03:00
83e9d87cde
STEP export: fix hole cutting counter message.
2023-08-24 14:26:27 +03:00
eb8c1d2a90
Fix compil issues (and probably a bug). Also display calculation time info.
2023-08-24 13:02:10 +02:00
cb54bdfa84
STEP export: add bounding box optimizations for cutting holes.
2023-08-24 05:42:56 +03:00
458d5fbeb8
STEP export: use unfractured polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15486
2023-08-24 03:47:55 +03:00
196fc67ece
Step exporter: generate oblong pad holes using 2 arcs + 2 segments.
...
Previously, the oblong shapes were polygons.
2023-08-23 18:16:25 +02:00
84fa4532b9
DIALOG_EXPORT_STEP: fix some issues:
...
- add missing inits (the zones were never created)
- fix a incorrect tool tip
- minor enhancements (add afew messages during export)
2023-08-21 09:36:25 +02:00
b52b05ebbb
Add zone export to step export
...
Mileage may vary on performance, decent enough for my board.
Warning, freecad chokes on boards with zones, but commerical tools are fine
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15234
2023-08-20 22:11:45 -04:00
Alex Shvartzkop
jean-pierre charras
Roberto Fernandez Bautista
Marek Roszko
Jeff Young
Ian McInerney
Seth Hillbrand
Jon Evans