It has all manner of issues with wxWidgets event processing. The
primary one that Kicad stumbles over is that there is no kill-focus
when the mouse leaves the thumb if the sim is running, so subsequent
mouse-up events (even if in another window) generate thumb scrolls.
Another one that gets us is scroll events being generated when the
window is fronted, but this may be debugger-specific.
Fixes https://gitlab.com/kicad/code/kicad/issues/11366
This is mainly for simulation testing where the dialog has to be
grown every time you restart the app, but it might as well be applied
to the similar dialogs.
Fixes https://gitlab.com/kicad/code/kicad/issues/12887
1) Reduce API surface.
2) Prefer for(int) loops when what we're looking for is the index of
the item to be found
3) Move "_" escape processing to SIM_MODEL_NGSPICE (which is the only
model which uses the escape mechanism)
1) Use C-locale when converting output of parsers to strings.
2) InferSimModel() must run on local copy of fields, not the fields in
the symbol (which might be different if they've already been edited in
the Symbol Properties Dialog, for instance).
3) InferSimModel() should accept a deviceType already set to RLC.
4) Don't output trailing decimal separators if there's no fraction.
(It creates a fully-unconnected map on the premise that it's easier
to add a pinMap than to edit one. This is probably no longer true
now that you don't have to un-assign a pin before re-assigning it.)
It appears the dialog had already been updated to remove it from the
formbuilder project and the cpp file, but the header wasn't checked in
at the same time.
onParamGridChanged was firing before CommitPendingChanges which meant
the edited value didn't get saved if the editor was still open when
OK was clicked.
1) Finish removing pin-count based APIs. We need to know the pin names
as well, not just the count.
2) Fix a bug in the regexp for SPICE functions to allow both lowercase
and uppercase function names
3) Move CreatePins() overrides to the new API so that we get pins on
raw SPICE models.
Fixes https://gitlab.com/kicad/code/kicad/issues/13190
Also fixes various bugs if symbols contained non-indexed pin numbers.
We really need to know the actual pin names when creating models, rather
than just assuming 1, 2... etc.
Fixes https://gitlab.com/kicad/code/kicad/issues/13183
As of wxWidgets 3.2, the wxWidgets event handler runs code after the
the client event handler that depends on the menu still existing.
Because there are potentially many paths to call ReCreateMenuBar from
within a menu event handler, let's just wrap this action in a CallAfter
to make sure it happens after the wx handler call completes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13149
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....More bug fixes for escaped model parameters.
Note that this whole escaping thing seems like a bad idea to me, but
I don't fully understand the difference between model parameters and
instance parameters so I don't know if there's a better way to handle
it or not....
Fixes https://gitlab.com/kicad/code/kicad/issues/13179
The paged book initialization (and others) can generate events,
re-laying out the whole dialog multiple times during initialization.
This halts events during the layout period
Fixes https://gitlab.com/kicad/code/kicad/issues/13158
Relative include commands resolve in the following order:
1. local to the file from which they are included
2. local to the project
3. local to the SPICE_LIB_DIR directory
Fixes https://gitlab.com/kicad/code/kicad/issues/13083
Check for already loaded schematics in the current sheet path as well
as the current project root sheet path to prevent multiple loads of
shared schematic. This bug was causing shared sheets to be loaded more
than once which caused instance data to get separated by each copy rather
than saved in one copy of the schematic which would result in all instance
data being lost except the last saved copy of the schematic. This bug has
been around forever and may be the cause of some unexplained schematic
instance data corruption issues. This bug does not apply when opening
the full project.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11076
1) if a legacy model references a library then we need to see if said
libraray exists and read model from it if so
2) legacy node ordering is by index, not pin name
3) we can't auto-generate a pin map when we don't know the pin names,
so don't try
The pins can exist on a different sheet from the no-connect. In this
case, we do not set the ERC for the current sheet to the remote pins,
instead only link the NC
This is a special field, always existing, that cannot be handled like other fields.
Also avoid using translated names when initializing the field name.
Translated names can be used only in UI, not in internal data.
fixes#13113fixes#13125
Also adds simulation model inference to Symbol Editor's Simulation Model
Editor, and adds write-back from both Simulation Model Editors to their
parent Symbol Fields Editor dialogs.
Fixes https://gitlab.com/kicad/code/kicad/issues/12505
Shared schematics can have a root sheet instance when opened with the
schematic editor in stand alone mode. This would cause a crash when
opening the shared schematic in a project where it was shared because
the root instance was trying to be saved in the normal sheet instance
data which is not valid.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13102
label has 0 pins -> unconnected label warning
label has 1 pin -> OK only if also has a NC marker, otherwise unconnected pin warning
label has >1 pins -> OK only if has no NC marker, otherwise "NC is connected" warning
Thanks @craftyjon for helping work out the details
This is probably a good rule of thumb to prevent any event ordering
issues between platforms or unhandled events being trigger during
inherited object destruction.
Also removes a bunch of std::string stuff from the file handling in the
simulator. All our file handling, env variable expansion, project path,
etc. stuff is wxString based, and jumping through std::string in between
just makes it more complex and increases the potential bug surface.
Also fixes a bug where you'd get two error messages when a spice model
library wasn't found.
Also fixes a bug where you'd get a spice model library not found error
when the text field was empty.
Also fixes a bug where we'd try to absolutize a path starting with an
unresolved text or environment variable. If the path starts with a
variable it's probably absolute, and tacking on the project path in the
error message just obfuscates things.
Fixes https://gitlab.com/kicad/code/kicad/issues/13082
Also moves passive RLC inference out from migration to just-in-time
creation for the simulator or netlisting.
Also fixes a version guard mismatch because the spice migration was
done inside UpdateSymbolInstances (which has its own version guard).
Also changed UpdateSymbolInstances to UpdateSymbolInstanceData so
someone else in the future doesn't think it's a general-purpose symbol
instance updater.
The crash was caused by an unhandled exception. The uncaught exception
caused a cacophony of null configuration setting pointers so guards were
added to prevent crashes should other exceptions occur that do not get
handled correctly.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13046
Also includes fixes for instance data and resolving of textvar
references.
Also includes virtual d'tors for IBIS parser to get rid of all the
compile warnings on CLang.
Fixes https://gitlab.com/kicad/code/kicad/issues/12357
... to netclass flags. They're now directive labels and the netclass
field isn't auto-added anymore. However, we *do* auto-add an intersheet
refs field, and that's required.
1) Fix <TAB> processing
2) Don't hide/show controls where possible
3) Use a more concrete reference to primary parameter in Save to Value
checkbox
4) Move Save to Value checkbox into model section
Fixes#13062Fixes#13056Fixes#13057
However, DXF and HPGL is not perfect, but OTOH this is not an usual format for schematic.
PS format is not tested for now.
Fixes an issue with `wait_for_tasks()` and adds a lower-overhead
`push_loop` helper. We replace our usage of `parallelize_loop` with
`push_loop` as we didn't use the multi-future vector return and don't
need the extra overhead.
When simulating an empty netlist, calling the `.save all` and `.probe
alli` commands gives a segfault in ngspice. We can avoid this by
skipping these commands in KiCad.
Fixes https://gitlab.com/kicad/code/kicad/issues/12938
Jeff Young
Wayne Stambaugh
Jon Evans
jean-pierre charras
Mike Williams
Ian McInerney
Seth Hillbrand
Graham Keeth
Marek Roszko
aris-kimi
Alexander Dewing
Barabas Raffai
Stefan
Fabien Corona
Mikolaj Wielgus
kliment