Convert minimum sheet width and height definitions from mils to internal
units.
Add comment to sheet minimum width and height definitions to indicate
sizes are in mils.
This also removes vector cover types which do nothing except obfuscate
the underlying implementation.
Mainly changes SCH_SHEET_PINS and CONFIG_PARAM_ARRAY (which will soon
be replaced by Jon's new stuff).
This moves EESchema DLIST structures to rtree. These changes are more
fundamental than the pcbnew changes from 9163ac543888c01d11d1877d7c1
and 961b22d60 as eeschema operations were more dependent on passing
drawing list references around with SCH_ITEM* objects.
1) When sheet pins are on 3 or more sides there's no point in switching
the orientation to vertical.
2) Careful that we don't cause the sheet to walk when rotating and the
sheet-name or file-name is longer than the side it's on.
Fixes: lp:1841714
* https://bugs.launchpad.net/kicad/+bug/1841714
The full filename comparison to detect the reuse of a file was broken on Windows
because it mixed a native filename notation (containing the drive id),
and a unix notation (no drive in filename, different separator).
Bus upgrades: core new connectivity code
Bus upgrades: eeschema integration and modifications
Bus upgrades: eeschema dialogs
Bus upgrades: netlist export
Bus upgrades: file format changes
No dangling symbol for text items with a NO-CONNECT.
DanglingStateChanged doesn't work with dangling flag aggregators
(which return true if any child is dangling).
Then again, we don't actually use any of the aggregators anyway
so I removed them.
Fixes: lp:1799589
* https://bugs.launchpad.net/kicad/+bug/1799589
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
This adjusts the selection addition criteria for
blocks to allow items such as labels to connect to
lines not at the endpoints. It also uses the same
logic to correctly gather bus-wire, bus-bus entries.
Fixes: lp:1738941
* https://bugs.launchpad.net/kicad/+bug/1738941
All of the schematic object load and save code is implemented in the
legacy schematic plugin so it is no longer required.
Remove unused file with old schematic file loader.
Doxygen comment cleaning.
Calculate the proper minimum height when resizing sheets to prevent resized
sheet height from always increasing.
Prevent the sheet pins from being drawn in the corners of the sheet when
updating the edge constraints on resize. This ensures that the sheet pin
is always drawn within the bounds of the sheet. Please note that this fix
may not be 100% accurate as is assumes the default grid size of 50 mils.
This may not be what the user expected but it guarantees that wires will
connect to the pin properly.
Fixes lp:1699796
https://bugs.launchpad.net/kicad/+bug/1699796
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
bitmaps.h was included in nearly every file in the project due to it
being included by base_struct.h
Only about 130 files actually use the XPM definitions defined there, and
many of those already included bitmaps.h themselves, or via
menu_helpers.h. However, touching bitmaps.h would result in over 400
rebuilt files for pcbnew alone.
This commit moves the bitmap-related types like BITMAT_DEF out to a new
header, which is still included by base_struct.h, which is less
avoidable for now, it's it's used in the interface.
The icon list is still in bitmaps.h. This has the side effect that's
it's now easier to automatically generate this file.
Many classes in pcbnew and eeschema needed some functions moved
to the implementaitons from the headers too.
Make all EDA_TEXT data private and rename accessors to avoid function
name collisions in derived classes.
Overload EDA_TEXT's SetTextAngle() and SetEffects() in TEXTE_PCB.
Add support for preserving Reference text position, size, orientation
during a netlist import into a BOARD, as well as the one off footprint
update dialog.
* Factor out PROPERTIES object from the PCB plugin code and move it into
common so it can be used by both the Pcbnew and Eeschema plugins.
* Add schematic I/O plugin manager for loading and saving schematic and
component library files.
* Add initial attempt at a parser for current schematic file format. This
parser will be infinitely more strict than the current parser which is very
forgiving in what it parses.
* Make minor changes to the base bitmap class to support the new parser.
* Add find root sheet support to sheet object to allow fetching the root
sheet from any sheet in the stack.
* coding standard fixes
* library part not library component (no such thing as a library component)
* string concatenation fix
* and an inline harmless debug/dump function
* Derive SCH_SHEET_PATH from std::vector< SCH_SHEET* > and remove unnecessary
assignment operator and list management functions.
* Remove function BuildSheetPathInfoFromSheetPathValue() since it was
effectively an assignment operation.
* Replace all calls to BuildSheetPathInfoFromSheetPathValue() with assignment
operator.
* Replace list management functions with vector management functions.
* Fix a error message that wasn't translatable.
* Ensure proper SCH_SHEET object page numbering which caused annotation to
calculate incorrect reference designators when annotating by using page offsets.
* Added SetPageNumbers to SCH_SHEET for setting sheet page numbers after
schematic is loaded.
* Move FindSheetByName() function from SCH_SHEEET_PATH to SCH_SHEET object
and update calls to FindSheetByName() accordingly.
* Remove SCH_SHEET_PATH::FindSheet() which was unused.
* Add sorting option to SCH_SHEET::GetSheets().
* Add const and non-const version of GetRootSheet() to SCH_SHEET.
* Add GetSheetPaths() function to SCH_SHEET which behaves the same way
as SCH_SHEET_LIST except it uses standard C++ containers and is a much
simpler design.
* Add function to get a list pointers to this sheet and all of it's sub-sheets
to SCH_SHEET.
* Remove unused function SetFootprintField() from SCH_SHEET_PATH.
* Add sheet number that is set by schematic file load order. This duplicates
the previous SCH_SHEET_PATH behavior.
* Uncouple SCH_REFERENCE and SCH_REFERENCE_LIST from SCH_SHEET_PATH.
* Add - operator to SCH_SHEET for comparison purposes. This duplicates the
behavior of SCH_SHEET_PATH::Cmp().
* Uncouple SCH_COMPONENT::GetRef() from SCH_SHEET_PATH and use SCH_SHEET
instead.
* Uncouple SCH_COMPONENT::GetUnitSelection() from SCH_SHEET_PATH and use
SCH_SHEET instead.
* Fix all calls to GetRef() and GetUnitSelection() to pass a pointer to the
appropriate SCH_SHEET object instead of an SCH_SHEET_PATH object.
* Add code to SCH_SHEET object to clear annotation.
* Change SCH_COMPONENT::GetPath() to derive path from SCH_SHEET object instead
of SCH_SHEET_PATH object.
* Remove clear annotation code from SCH_SCREENS object.
* Make SCH_SHEET parent the SCH_SHEET object that loaded it. This preserves
the hierarchy when the schematic is loaded.
* Add function to SCH_SHEET to find the root sheet from any sheet in the
hierarchy.
* Add functions to SCH_SHEET to create the path and human readable paths for
any sheet without relying on the external SCH_SHEET_PATH object.
* Remove function LocatePathOfScreen from SCH_SHEET since it was not used
anywhere.
* Add human readable path to message panel information for SCH_SHEET.
* Set the name of the root sheet to "root" instead of the default generated
when a new SCH_SHEET is created.
* Set the empty sheet name and file name to "root" and "noname.sch" when
Eeschema is opened with no schematic.
* When no item is at the current position on a left mouse click, show the
current sheet information in the message panel.
* Add less than operator for sorting SCH_SHEET objects by path length and
time stamps when the path lengths are the same.
Move items rework: enhancements: for some items (sheets, components, bus entries) the mouse cursor is no more wrapped to the anchor. For large symbols, this is better: they are more easy to place.
There is also a change when starting a move item command: the full screen is redraw, and therefore there is no artifact due to the XOR draw mode.
Some other minor coverity fixes (uninitialized members).
Pcbnew: Code cleaning and bug fix in autoplace functions
Dialog exchange footprints has now a separate button to update the .cmp file, only on request.
Fix an annoying issue about not named nets:
now, these nets are named from the component references and pin names which are connected.
therefore, unless the net or the footprint references are modified, the net name is not modified between 2 netlist calculations.
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
* Convert Eeschema from manually linked list to DLIST for storing
SCH_ITEM objects.
* Add helper functions to SCH_SCREEN for appending list of SCH_ITEM
objects.
* Fix bug in wire editing code for accurate undo/redo behavior.
* Add member to DLIST to append another DLIST.
* Other minor code cleaning.
* Remove unnecessary copy constructors from schematic and component
library objects.
* Add comment to class definitions where the default copy constructor
generated by the compiler was adequate.
* Add assignment operator to EDA_ITEM, SCH_ITEM, and all schematic
objects where the default assignment operator generated by the
compiler would not be adequate.
* Move SCH_ITEM::Place() code into SCH_EDIT_FRAME so schematic item
objects no longer have any knowledge of the schematic frame window
or undo/redo containers.
* Add check box and flag to ignore replacing the component reference
designator field.
* Fix a resizing bug when switching between the find and replace modes of
the find/replace dialog.
* Fix replace component reference designator field bug.
* Force rebuild of search list when schematic is modified and the replace
dialog is closed.
* Prevent finding the next item when the find/replace dialog is closed.
* Respect warp mouse pointer setting when closing find/replace dialog.
* Fix duplicate mnemonic control accelerator keys in find/replace dialog.
* Enable replace toolbar button and menu entry.
* Improve find replace logging granularity.
* Fix find and replace dialog control hiding and disabling.
* Minor improvements to the SCH_FIND_REPLACE_DATA object.
* Move find collector list iterator into the collector object.
* Add visibility override flag to EDA_ITEM to temporarily show items that
are hidden during find and replace.
* Replace Eeschema find code with a collector based implementation.
* Fixed a search bug when all subsequent searches of an item would ignore
the remaining valid child items when an item had more than one child
item that matched the search criteria.
* Add SCH_FIND_COLLECTOR class to find all items that meet the specified
search criteria.
* Add SCH_FIND_COLLECT0R_DATA to keep track of information for all matching
items.
* Use collector to iterate over the list of items that match the search
criteria rather than trying to start at the last matched item.
* Remove unused searching methods from sheet path and sheet path list
objects.
* Add replace and replace all functionality to Eeschema find dialog.
* Push matching methods down to EDA_ITEM class so they can be used by
other derived objects.
* Add method to EDA_ITEM to test if item supports replacing.
* Add flag to find/replace data to support replace feature.
* Disable wild card matching check box when dialog is in replace mode as
wild card replacement is not supported at this time.
* The usual Doxygen comment and coding policy fixes.
* Tweak move item to support moving schematic sheet pin objects.
* Change schematic sheet pin set position to constrain position within
the parent sheet.
* Schematic sheet pin moving now handled by unified move code.
* Remove old schematic sheet pin move code.
* Add custom client data object for passing hot key information to
command event handlers.
* Fix a bug that prevented changes to schematic sheet pin objects from
being undone.
* Add get and set position methods to all schematic items.
* Encapsulate schematic item position members.
* Add swap data method to schematic items that lacked one.
* Remove global swap data function used by undo and redo functions.
* Unify as many schematic move methods as possible.
* Remove unnecessary place schematic item methods.
* All schematic items are now moved in the same event handler.
* Fixed bug in hierarchical sheet get menu item string method.
* Make no connect and junction items movable, fixes lp:804048
* Add net list object creation functions to schematic sheet and label
objects.
* Remove function to add schematic object net list items as it is no
longer needed.
* Add license statements to all modified files that required one.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
* Change the minimum required CMake version to 2.6.4 for all build platforms
except Windows and OSX.
* Move all schematic plot code from plot.cpp into the appropriate schematic
objects.
* Create SCH_SCREEN plot method to plot all objects in the schematic
screen.
* Delete plot.cpp and remove it from the CMakeList file.
* Fix debug build warning (lp:793373).
* Changed sheet edit restore and undo to use object copy and replace method.
* Add minimum width and height constraints when resizing sheets that have
hierarchical pins.
* Fix drag sheet hot key bug.
* Change Doxygen configuration to extract private methods and members
when creating documentation.
* Fix a bunch of Doxygen comment warnings.
* Change all code references to pin sheet and sheet label to sheet pin to
more closely match the sheet pin object for improved code readability.
* Change menu and tool bar text from pin sheet to sheet pin for improved
user readability.
* Moved sheet pin place method to sheet pin object source file.
* Move last sheet pin stored state information into schematic frame object.
* Add Doxygen comments for the sheet pin editing methods.
Jeff Young
Jonathan Warner
Jon Evans
Seth Hillbrand
Wayne Stambaugh
Seth Hillbrand
Mark Roszko
jean-pierre charras
Maciej Suminski
John Beard
Dick Hollenbeck
Simon Richter
Wayne Stambaugh
Povilas Kanapickas
Lorenzo Marcantonio