Other scaling factors (MILS_TO_IU_SCALING_FACTOR and DECIMILS_TO_IU_SCALING_FACTOR)
also defined only in convert_to_biu.h.
Allows different scaling value for Gerbview.
Needs more tests.
as a starting point
* Make double Distance() take double arguments and remove internal range checking.
* Start on EDA_DRAW_FRAME::AdjustScrollBars() and use "double" for most all calculations
in anticipation of setting INT_MAX INT_MIN limits eventually.
* Move board item object Format() functions into PCB_IO object.
* Change file format to use layer names instead of numbers.
* Change file extension to kicad_pcb.
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
*) for footprint access into *.mod files and
*) BOARD save/load
The item_io.cpp and ioascii.cpp have been set off to the side for reference
as *.notused, for awhile.
The CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE are gone,
this is now the mandatory usage of the LEGACY_PLUGIN. This should reduce
code maintenance for awhile until the s-expression plugin comes into
play. But at least for legacy format, there is not two code bodies
to maintain any more.
A new LEGACY_PLUGIN footprint library caching scheme is in place which
needs some testing. It should not be any faster, but might give better
results in a networked environment if there is *.mod files on the server.
* Remove internal units from BASE_SCREEN and it's derivatives.
* Remove internal units from EDA_DRAW_FRAME and it's derivatives.
* Use build time code to replace internal units conversions.
* Fix scaling bug in page layout sample window that I created in my
last commit.
* Move all convert from user to internal units into base_units.cpp.
* Remove internal units parameters from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Remove internal units from all dialog text control helper classes.
* Move all convert from internal to user units functions into separate file.
* Remove internal units parameter from all moved conversion functions.
* Revise all source code that calls the moved conversion functions.
* Compile these conversion routines separately for the appropriate pcb or
schematic internal units.
* Move internal units specific status bar update code into the appropriate
application for updating the status bar.
* Move millimeter user units rounding function to common.cpp.
* Move EDA_TEXT object into separate header and source file.
* Compile EDA_TEXT class separately for BOARD_ITEM and SCH_ITEM units.
* Compile PAGE_INFO class separately for BOARD_ITEM and SCH_ITEM units.
* Minor formatting tweaks to Pcbnew s-expression file.
* Move internal unit formatting functions into BOARD_ITEM and SCH_ITEM.
* Save dialog now supports saving boards to new file format.
* Add CMake option to build s-expression file save.
* Add check to main CMakeList.txt file to make sure nanometers are
enables when the new file format is built.
* Minor tweaks to object format functions for improved output.
* Rename kicad_plugin.h/cpp to legacy_plugin.h/cpp.
* support for 3 terminal regulators
* add a data file management to store parameters for regulators ( name, vref value, Iadj value, type)
Needs some refinements, but it is already very useable.
Commit dialog page setting patch from Alexander Zakamaldin
* Add s-expression Format() function to all objects derived from
BOARD_ITEM.
* Add s-expression Format() function to base objects as required.
* Add functions to convert coordinates from base internal units
(nanometers) to millimeter string for writing to s-expression
file.
* Add temporary dummy conversion functions to prevent link errors
until schematic and board object and action code can be separated
into DSO/DLL.
* Add CMake build option to build Pcbnew with nanometer internal
units.
Eeschema: one string with a bad char (\a, not useable in internationalized strings).
Dialog_page_settings: use not translated strings in code, so strings can be freely translated for the UI.
(Initial code was not working with existing translations)
Update 2 icons.
* BLOCK_SELECTOR class is not longer derived from EDA_ITEM.
* Encapsulate BLOCK_SELECTOR class member variables and add access methods.
* Move HandleBlockBegin() function from block_commande.cpp to drawframe.cpp.
* Remove virtual methods from top level derived objects per future
coding policy change.
* Remove Doxygen copydoc statement from objects derived from EDA_ITEM
since the comments are automatically copied to the derived object.
* Removed copy and pasted Doxygen comments from objects derived from
EDA_ITEM.
issue in cast to wxRect fixed (EDA_RECT accepts negative size, but not wxRect, so the wxRectcast is normalized now).
This fixes some bugs.
A minor other bug fix in Pcbnew.
This works, but in my version of wxformbuilder there is a bug which does not properly show the
subclass property, even though it is still in play. This happens after saving then loading the *.fbp file.
So it is a nuisance bug, but does not affect functionality.
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
Pcbnew:
* graphic_item_properties_base.fbp * dialog pad edit: make some strings more easier to translate.
* global pad edition: fix a bug that change pad position instead of pad size (round pas only).
Eeschema:
* fix a bug: new created wires were not alwaes shows until the screen was redrawn.
wxWidgets 2.9 knows wxSVGFILEDC device context.
Unfortunately, arcs are drawn as pies (this is a feature, not a bug).
This is not correct for Kicad.
So Kicad has its own wxSVGFILEDC (named KicadSVGFileDC) that is basically the same as wxSVGFILEDC,
but with arcs drawn as arcs, not pies.
Note also under wxWidgets 2.8 does not know wxSVGFILEDC , so kicad had already its own SVG device context.
* Convert Eeschema from manually linked list to DLIST for storing
SCH_ITEM objects.
* Add helper functions to SCH_SCREEN for appending list of SCH_ITEM
objects.
* Fix bug in wire editing code for accurate undo/redo behavior.
* Add member to DLIST to append another DLIST.
* Other minor code cleaning.
* Pcbnew: in hight contrast mode the 'V' hotkey did not always refresh the screen.
* Eeschema: incorrect print scale when the option 'Show page limits' is disable.
Eeschema: Viewlib is now accessible from Libedit (to browse libs or load a component to edit)
Libedit: uses now the same dialog as the schematic editor to load a component
Some code cleaning.
which is in turn already within BOARD.
* encapsulate class D_PAD with accessors, making data private.
* make D_PAD::GetBoundingRadius() do its longer calculation lazily, based on
m_boundingRadius == -1.
Design rules: increase number of vias and tracks sizes
Pcbnew: netlist reader: change from my recent commits to keep netnames in pads for footprints not in netlist
(allow an user to place some footprints by hand, set pads netnames and do not lost these netnames when loading a netlsit)
Fix other very minor issues.
sizes. Tested with postscript output only. Required minor file format changes
to reflect the "portrait" setting. common/dialogs/dialog_page_settings.cpp
uses a checkbox but its name is "Landscape", which is inverted from portrait,
but since it is the more common choice, I used that rather than portrait.
The tooltip for that checkbox makes it clear. No portrait mode is supported
for "User" paper size.
* Remove unnecessary copy constructors from board and module library
objects.
* Add doClone() method to board and library objects.
* Add comment to class definitions where the default copy constructor
generated by the compiler was adequate.
* Replace copy method with clone method where applicable.
* Remove DuplicateStruct() function.
* Remove track object copy function.
* Remove unnecessary copy constructors from schematic and component
library objects.
* Add comment to class definitions where the default copy constructor
generated by the compiler was adequate.
* Add assignment operator to EDA_ITEM, SCH_ITEM, and all schematic
objects where the default assignment operator generated by the
compiler would not be adequate.
This feature is very useful for electronics hobbyists who use DIY PCB technology
(both toner transfer and photoresist methods).
Also width correction may be useful for PCB designers who take care of track width etching.
This patch also fixes some minor PS plotting issues.
* Move SCH_ITEM::Place() code into SCH_EDIT_FRAME so schematic item
objects no longer have any knowledge of the schematic frame window
or undo/redo containers.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
* EDA_DRAW_FRAME completely encapsulated except for DrawFrame member.
* Moved members specific to Pcbnew from EDA_DRAW_FRAME to PCB_BASE_FRAME
or PCB_EDIT_FRAME as appropriate.
* Replace EDA_TOOLBAR with wxAuiToolBar as EDA_TOOL bar provided no
additional functionality and made code less readable.
* Remove EDA_TOOLBAR class definition from wxstruct.h and delete file
wineda_toolbar.cpp.
* Rename tool bar members to something more descriptive since the
horizontal and vertical references wont mean anything once the
tool bars are movable.
* Lots of dead code removal.
* changed all the RotatePoint() functions in trigo.{h,cpp} to take a double as the
angle, which is still in tenths of degrees for now.
* EDA_TEXT::m_Orient is now double, still in tenths of degrees (for a short while),
but the double means parsing files and saving them use a different format string.
++pcbnew
* DRAWSEGMENT::GetStart() and GetEnd() do not operate for S_ARC like they used to.
They are now simply accessors for m_Start and m_End. Use DRAWSEGMENT::GetArcStart()
and GetArcEnd() and GetCenter() for arcs. specctra_export.cpp was the only
source file dependent on the old behavior.
* DIMENSION::m_Text is now contained, not dynamically allocated.
* more kicad_plugin work.
* Enable replace toolbar button and menu entry.
* Improve find replace logging granularity.
* Fix find and replace dialog control hiding and disabling.
* Minor improvements to the SCH_FIND_REPLACE_DATA object.
* Move find collector list iterator into the collector object.
* Add visibility override flag to EDA_ITEM to temporarily show items that
are hidden during find and replace.
* Fix compil issue about automatically created pcb_plot_params.h :
pcb_plot_params.* moved from pcbnew to common because item_io.cpp (using this file) is compiled in common.
In common.cpp GetTimeStamp is renamed GetNewTimeStamp (a better name).
Pcbnew: prepare work to calculate connections between pads that inteserct and therefore can be connected without any track (composite pads).
which should eventually go away in favor of kicad_plugin.cpp.
Add CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE, which should not be
used yet, and both default to OFF accordingly.
* Removed Pcb_Frame argument from BOARD() constructor, since it precludes
having a BOARD being edited by more than one editor, it was a bad design.
And this meant removing m_PcbFrame from BOARD.
* removed BOARD::SetWindowFrame(), and BOARD::m_PcbFrame
* Removed the global BOARD_DESIGN_SETTINGS which was in class_board.cpp
* added BOARD_DESIGN_SETTINGS to the BOARD class, a full instance
* a couple dialogs now only change BOARD_DESIGN_SETTINGS when OK is pressed,
such as dialog_mask_clearance, dialog_drc, etc.
* Removed common/pcbcommon.cpp's int g_CurrentVersionPCB = 1 and replaced it
with build_version.h's #define BOARD_FILE_VERSION, although there may be a
better place for this constant.
* Made the public functions in PARAM_CFG_ARRAY be type const.
void SaveParam(..) const and void ReadParam(..) const
* PARAM_CFG_BASE now has virtual destructor since we have various way of
destroying the derived class and boost::ptr_vector must be told about this.
* Pass const PARAM_CFG_ARRAY& instead of PARAM_CFG_ARRAY so that we can use
an automatic PARAM_CFG_ARRAY which is on the stack.\
* PCB_EDIT_FRAME::GetProjectFileParameters() may no longer cache the array,
since it has to access the current BOARD and the BOARD can change.
Remember BOARD_DESIGN_SETTINGS are now in the BOARD.
* Made the m_BoundingBox member private, this was a brutally hard task,
and indicative of the lack of commitment to accessors and object oriented
design on the part of KiCad developers. We must do better.
Added BOARD::GetBoundingBox, SetBoundingBox(), ComputeBoundingBox().
* Added PCB_BASE_FRAME::GetBoardBoundingBox() which calls BOARD::ComputeBoundingBox()
* Replace Eeschema find code with a collector based implementation.
* Fixed a search bug when all subsequent searches of an item would ignore
the remaining valid child items when an item had more than one child
item that matched the search criteria.
* Add SCH_FIND_COLLECTOR class to find all items that meet the specified
search criteria.
* Add SCH_FIND_COLLECT0R_DATA to keep track of information for all matching
items.
* Use collector to iterate over the list of items that match the search
criteria rather than trying to start at the last matched item.
* Remove unused searching methods from sheet path and sheet path list
objects.
* Add replace and replace all functionality to Eeschema find dialog.
* Push matching methods down to EDA_ITEM class so they can be used by
other derived objects.
* Add method to EDA_ITEM to test if item supports replacing.
* Add flag to find/replace data to support replace feature.
* Disable wild card matching check box when dialog is in replace mode as
wild card replacement is not supported at this time.
* The usual Doxygen comment and coding policy fixes.
* Fix bug in hierarchical searches using sheet path pointers which are
destroyed on every search. Use human readable path as last sheet found
in test to prevent comparison of deleted pointers.
* Fix a bug in SCH_COMPONENT::Matches() that would prevent searching for
pins if the search all fields flags was not set.
* Fix a bug in SCH_COMPONENT::Matches() to use the sheet path to perform
the comparison to the correct reference designator and unit number.
* Fix wrapping in sheet path and sheet path list MatchNextItem methods.
* Push search methods down to EDA_ITEM object so advanced searching can
be performed on all items derived from EDA_ITEM.
* Add virtual method to EDA_ITEM object to test if item supports replacing
text.
* Replace switch statement magic numbers in Eeschema socket connection code
with Pcbnew for improved readability.
* Replace C malloc() and free() functions with C++ new and delete
operators or the appropriate STL container.
* Add option to end mouse capture function to skip executing the end
mouse capture callback.
* Lots of coding policy and Doxygen comment goodness.
Added configuartion option KICAD_NANOMETRIC for this.
* With option set to false: *
- it should work and compile as usual
- some values are saved with decimal point (which should be backward/forward compatible as old versions should just drop fractional part)
* With option set to true: *
- lengths in Global Design Rules should be settable 1nm steps.
FROM/TO_LEGACY_LU(_DBL) macros introduced for easy interconnection between old and new units.
* Use version of DateAndTime that returns a wxString and delete the
version that takes a char* as it is no longer required.
* Merge StrNumICmp() and StrLenNumICmp() into StrLenNumCmp() to create a
single function for comparing strings with integers and remove a lot
of duplicate code.
* Remove unused strupper from string.cpp.
* Use wxArrayString for sorting the EDA_LIST_DIALOG contents.
* Modify algorithm to correctly calculate the virtual drawing size and
offset required to place the drawing correctly under all conditions.
* Ignore default wxWidgets scroll keys on Windows in EDA_DRAW_PANEL key
event handler.
* Create command event handler for orienting schematic items and block.
* Remove redundant orient item and block command handler code and IDs.
* Remove redundant cancel current command event table entry.
* Remove unnecessary schematic bitmap object virtual functions.
* Set path when saving schematic sheet files to prevent assertion in
updated path and file write permission test function.
* Restore directory and file name write permission test function to it's
previous behavior to prevent unexpected save results.
* Add an assertion to verify the path is not empty to directory and file
write permission test function.
* Improve documentation for path and file write permission test function.
* Fix Doxygen link warnings.
* Add a rotate event handler to schematic frame object.
* Remove unique rotate item command IDs.
* Use process event instead of post event to eliminate the need to clean
up the command event client object from the heap.
* Unify find next item and next DRC error hot key commands.
* Unify move and rotate hot keys commands.
* Remove external dependency for adding suffix to reference designator
fields.
* Make schematic field get and set position methods transform coordinates
relative to the parent component object that owns them.
* Make base text class get text method virtual so derived classes can
change the base string according to their individual requirements.
* Fix a problem with default place schematic item add in last commit.
* Tweak move item to support moving schematic sheet pin objects.
* Change schematic sheet pin set position to constrain position within
the parent sheet.
* Schematic sheet pin moving now handled by unified move code.
* Remove old schematic sheet pin move code.
* Add custom client data object for passing hot key information to
command event handlers.
* Fix a bug that prevented changes to schematic sheet pin objects from
being undone.
* Add get and set position methods to all schematic items.
* Encapsulate schematic item position members.
* Add swap data method to schematic items that lacked one.
* Remove global swap data function used by undo and redo functions.
* Unify as many schematic move methods as possible.
* Remove unnecessary place schematic item methods.
* All schematic items are now moved in the same event handler.
* Fixed bug in hierarchical sheet get menu item string method.
* Make no connect and junction items movable, fixes lp:804048
* Fixed bug on Windows that prevented the menu short cuts from working
properly.
* Fix duplicate menu short cut keys in KiCad, Pcbnew, and Eeschema.
* Add menu short cuts for all possible menu entries.
* Factor test for auto save file into base frame class.
* Added auto save feature to Eeschema for saving schematics, addresses
launchpad question 173631.
* Add auto save interval control to Eeschema options dialog.
* Fix problem with subsequent auto saves in last commit.
* Factor auto save common code into base frame class so all frame windows
can take advantage of the shiny new auto save goodness.
* Use a timer instead of depending on mouse and keyboard events to trigger
an auto save.
* Check for auto save file when opening a board and ask user if they
wish to use the auto save file or the last saved board file.
* Protect all base frame public members.
* Add KiCad build option states to copy version information to clipboard
function.
* Add a note to the main CMakeList.txt file to let developers know that
new option states should be added to the copy version information to
clipboard function.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
* Move auto save time global variables into PCB_EDIT_FRAME object.
* Move footprint library name list global variable int PCB_EDIT_FRAME
object.
* Improve library back up and temporary file error message strings and make
them translatable.
* PCBNew string unification.
* Translate French code names and comments.
* Coding style policy and Doxygen comment fixes.
* All header files used to create the PCB common library now compile as
stand alone code. This prevents the need to define them in a specific
order to make source code compile properly. It should also now be
possible to relocate the source code to build the common PCB library
to a separate folder.
* Remove sine and cosine look up tables from trigo.cpp and replace them with
sin() and cos() math functions.
* Large include file clean up to prevent header ordering dependency build
failures.
* Translate French code names and comments.
* Lots of coding style policy and doxygen comment fixes.
Remove or move old .ico and .pgn files and add new icons (.ico files and .png files) in bitmaps_png/icons and bitmaps_xpm/icons
.png files and .ico are used to build desktop shortcuts
Handle variable size bitmaps in kicad.
* Add hotkey fast switch to two grids: for place and trace
Alt+"1" - switch grid for place module
Alt+"2" - switch grid for trace
This two grid set in dialog - menu Preferences->Dimensions->Grid.
* Add hotkey switch grid:
"`" - switch to next grid
Ctrl+"`" - switch to previous grid
* Add hotkey switch track width:
"W" - switch to next track width
Ctrl+"W" - switch to previous track width
cmakemodules:
* Add GOST to KICAD_BUILD_VERSION if define KICAD_GOST.
* Add hotkey "P" - place item
* Add record and play macros for sequence hotkey.
Macros set to numeric key 0..9.
<Ctrl>+<numkey> - start record macros
<hotkey> <mouse move> ... <hotkey>|<mouse place>
<Ctrl>+<numkey> - end record macros
<numkey> - play macros
* Add menu save/read macros to/from xml-file
* Add configure rotate angle for rotate module: 45 or 90 deg.
* fix segfault when move/drag segment if disconnected to pad
Eeschema:
* Graphic texts ans labels: fix fully broken undo/redo code relative to the way undo/redo command
* handles changes (maintly move) for labels
* Fix minor bug for undo command relative to block rotate
* Remove dead code.
* Add new class BITMAP_BASE, and (for Eeschema) SCH_BITMAP to handle bitmap images in schematic.
Remember plot Bitmaps in not possble with all plotters.
* Rename all ADD_MENUITEM_* functions to AddMenuItem and move them to
wxstruct.h since they are used by the Kicad main frame classes.
* Move SET_BITMAP and SETBITMAPS definitions to wxstruct.h.
* Fix a bug in SET_BITMAPS that prevented enabling menu item images on
OSX.
* Rename MsgItem to EDA_MSG_ITEM.
* Remove redundant includes from modified files.
* Doxygen and coding style policy fixes.
* Add USE_IMAGES_IN_MENUS definition to override the default platform
behavior for adding images to menu items.
* Update COMPILING.txt to document how to use USE_IMAGES_IN_MENUS.
* Fix Windows segfault when creating language selection submenu introduced
by new bitmap code in r3087.
* Changed per email from JP from CVPcb to CvPcb because I'm getting old and
blind and misread the email.
* Lot's of Doxygen comment and coding style policy fixes.
* Add general purpose user write permission test function to base
window class.
* Check user write permissions before saving project, schematic and
library files.
* Remove displaying file dialog every time the project file is saved.
* Display absolute paths for non-root sheet file in title bar.
* Remove redundant command table entry from schematic editor.
* Remove unused variables to fix GCC 4.6 warnings.
* The usual Doxygen comment and coding style policy fixes.
* Add in help menu a direct link to the new doc Getting_Started_in_KiCad.pdf, written by contributors (useful for beginners)
* Fix other very minor issues in CvPcb.
* Update howto doc about translation
jean-pierre charras
Dick Hollenbeck
Miguel Angel Ajo
Wayne Stambaugh
lajos kamocsay
lajos kamocsay
Alexander Zakamaldin
Joe Ferner
Andrey Fedorushkov
Marco Mattila
marco.
Vladimir Ur
Fabrizio
Jerry Jacobs