Commit Graph

14840 Commits

Author SHA1 Message Date
Seth Hillbrand 994be43782 ratsnest: Calculate ratsnest per pad
The local/dynamic ratsnest needs to calculate on a per-pad basis as the
module is always listed as having a visible ratsnest.  This fixes the
finalized ratsnest viewed when routing as well as the show local
ratsnest regression.

Fixes: lp:1811010
* https://bugs.launchpad.net/kicad/+bug/1811010
2019-01-08 17:19:30 -08:00
Seth Hillbrand 12e0e72107 pcbnew: Don't knock out thermals for non-conn zone
Non-connected zones are, by definition, not connected, therefore, we
should not knock out thermal reliefs under any case

Fixes: lp:1810989
* https://bugs.launchpad.net/kicad/+bug/1810989
2019-01-08 14:24:28 -08:00
Seth Hillbrand b0da1e19ee pcbnew: Don't use frame refresh to update display
Frame refresh in wxWidgets sets the focus back to indeterminate state
and prevents hotkey action until the focus is captured again.  Using
canvas update is the correct method to update the canvas display after
modifying zones/similar

Fixes: lp:1810993
* https://bugs.launchpad.net/kicad/+bug/1810993
2019-01-08 12:38:27 -08:00
Fabián Inostroza 7f6b35c6bc Don't start autopan if the cursor was warped
The application warps the cursor when initiating some actions (dragging,
selecting modules or Find and Move).  This warping should not also
trigger the autopan action.

Fixes: lp:1810787
* https://bugs.launchpad.net/kicad/+bug/1810787
2019-01-08 12:15:33 -08:00
Seth Hillbrand a8b3a3cc61 pcbnew: Allow capture of non-highlighted items
When routing in high-contrast mode, the user may wish to place items
that are primarily on a different layer while remaining in high contrast
mode.  This fixes a regression from 4.0.7

Fixes: lp:1804309
* https://bugs.launchpad.net/kicad/+bug/1804309
2019-01-08 11:38:06 -08:00
Seth Hillbrand 90ad240660 units: Move common units and add tests
Centralizing duplicate code from Eeschema and pcbnew and adding unit
tests
2019-01-08 09:29:32 -08:00
Seth Hillbrand 31ab4e6c9a eeschema: Simplify netlist dialog
The default filename textbox confusingly could not be edited and the
checkbox for "Use default filename" would also use a default location.
As the netlist export is no longer required in the workflow, we can
simplify the layout to always show the user the file save dialog
allowing them to choose the location and name of the exported netlist
file.
2019-01-08 09:26:36 -08:00
jean-pierre charras 419718b596 Remove a useless qa test.
It was added when refactoring the SHAPE_POLY_SET class, ande replace any use of CPolyLine class inside Kicad code.
the CPolyLine related code is now not used.
So this test nowadays makes no longer sense.
2019-01-07 20:24:11 +01:00
jean-pierre charras 3dd5a912b6 remove dead code. 2019-01-07 19:42:18 +01:00
John Beard 1ae6fc78a6 QA: Add pcbnew unit tests CMake subdir
Also modify the linkage of kiface objects, as this is not
supported by older CMake versions.

This was accidentally removed with the reversion of the application
of the wrong patch (8f11a2133).

QA: fix object files
2019-01-07 15:14:37 +01:00
jean-pierre charras 3f9230fa51 Eeschema: Fix incorrect behavior of cursors when moving cursors by arrow keys.
Fixes: lp:1810684
https://bugs.launchpad.net/kicad/+bug/1810684
2019-01-07 10:10:37 +01:00
John Beard 2d6f8a97b0 QA: Add some more Boost version guards
Some functions aren't defined on Boost < 1.59, which is
sadly inclusive of the Ubuntu LTSs.

Make some guards so you can still use these on the newer
Boosts with some useful fallback where possible.
2019-01-06 16:18:13 -08:00
Seth Hillbrand 8f11a2133e Revert "QA: Add a generic utility tool executable."
This reverts commit 502306314e.
2019-01-06 16:17:44 -08:00
Seth Hillbrand 0a4812be07 eagle: Set default pin type
Eagle 7.4 DTD defines pin direction as optional with a default of IO
(bidirectional).

Fixes: lp:1808585
* https://bugs.launchpad.net/kicad/+bug/1808585
2019-01-06 08:54:14 -08:00
Seth Hillbrand 1e5ba6f1b1 Replace DIM() macro
The standard DIM() macro was not typesafe as it happily deferred errors
to runtime that can be caught at compile time.  Replacing it with a
generic C++11 constexpr allows for typecasting, comparison and compile
time error checking.
2019-01-06 08:43:12 -08:00
John Beard cec97ebfa6 Remove unused VIRT_MIN/MAX from legacy_gal 2019-01-06 08:16:29 -08:00
John Beard ec91329da0 Pcbnew: Array tool should not number NPTHs
Devolve the logic as to whether a pad should be numbered or not
to a pad utility function. Add a very simplistic test for this
function (demonstrating how to test BOARD_ITEMs in general).

Fixes: lp:1804787
* https://bugs.launchpad.net/kicad/+bug/1804787
2019-01-06 07:55:49 -08:00
John Beard 81bac449d3 QA: Add unit tests on the Pcbnew library
This now allows code under /pcbnew to be tested.

A first test of the GRAPHICS_IMPORT_MGR is added.
2019-01-06 07:55:36 -08:00
John Beard 502306314e QA: Add a generic utility tool executable.
The intention here is to make it possible to wrap up many of the
KiCad utility tools into a single executable. This reduces link times
as well as the duplication of CMake files needed to build very
similar tools.

This particular tool should be suitable for any code in common,
code in pcbnew and other end-executables probalby will need an
analagous version linked to the relevant kiface.

The first tool is the coroutine_example.cpp test case, which
can be useful when learning, debugging or porting the coroutine
infrastructure.
2019-01-06 07:51:23 -08:00
jean-pierre charras 4493af9f4d Remove pcbnew/import_dxf because all the useful code was moved/merged to import_gfx 2019-01-06 11:17:39 +01:00
Seth Hillbrand 3b54a44540 wildcard strings update
Replace a few other cases where we used Windows-only or *nix specific
wildcard strings
2019-01-05 20:26:45 -08:00
Seth Hillbrand 02a1bf1de6 eeschema: Use system-dependent default wildcard
wxWidgets provides a system-dependent string for "*" or "*.*" depending
on the system.  Unfortunately, wxFormBuilder does not use this and
instead defaults to the Windows-only "*.*".  This is an ugly work
around.

Fixes: lp:1810221
* https://bugs.launchpad.net/kicad/+bug/1810221
2019-01-05 20:18:59 -08:00
Seth Hillbrand 69fc301bf3 eagle: Prevent 0-width lines in modules
It is very difficult to select 0-width lines and they aren't physical on
the board.  Items with this setting in Eagle should revert to the
default in KiCad.

Fixes: lp:1808584
* https://bugs.launchpad.net/kicad/+bug/1808584
2019-01-05 14:28:08 -08:00
John Beard 5e705347bb Libeval: Use add_custom_target so grammar.c won't be cleaned
If you use add_custom_command to generate the grammar file,
it can be removed by "make clean". This then means the user will
need to get it back from Git, or regenerate it with Lemon.

Changing to add_custom_command removes the output file
from the clean list. The incantation to rebuild the grammar
remains the same: "make libeval_grammar", and it is still not
required to have lemon installed for a normal build.

Fixes: lp:1809610
* https://bugs.launchpad.net/kicad/+bug/1809610
2019-01-05 07:44:06 -08:00
jean-pierre charras eb06ae5910 Plot filenames automatically generated: change the point ('.') find in layer names to '_'
This change was in comments, but not in code.
2019-01-05 12:44:38 +01:00
Seth Hillbrand a46f5c3af5 3d-viewer: Clamp inner radius of rings
Thick segments can cause radius to be set negative.  Effective radius of
these segments should be 0.

Fixes: lp:1803797
* https://bugs.launchpad.net/kicad/+bug/1803797
2019-01-04 16:49:21 -08:00
Seth Hillbrand 30521f0c57 gal: Fix zoom extents for large screens
When at small zoom levels, the integer bbox can overflow, preventing
redraw.  We fix this by redrawing the full tree when this happens

Fixes: lp:1733067
* https://bugs.launchpad.net/kicad/+bug/1733067
2019-01-04 16:00:31 -08:00
Seth Hillbrand 3a3bbbb545 GAL: Add transparency for bitmaps and Cairo draw
Bitmaps loaded via wx can contain alpha channels.  We utilize underlying
routines to correctly map the alpha.  This also standardizes the Cairo
alpha calls to ensure correct display in Fallback for partially
transparent highlights

    Fixes: lp:1809845
    * https://bugs.launchpad.net/kicad/+bug/1809845
2019-01-04 13:40:19 -08:00
Seth Hillbrand e8333633fe GAL: Add antialiasing options to Cairo
Cairo supports antialiasing when rendering but can be slow when set to
sub-pixel mode.  This bumps the minimum version of Cairo to 1.12
(available in 14.04 LTS as well as mingw) to support three antialias
settings (fast, good, best) that offer speed/appearance tradeoffs.

This can provide a higher-quality eeschema render as it works on a
per-element basis as opposed to the OpenGL per-screen antialias.
2019-01-04 13:39:56 -08:00
John Beard b743c39ed8 On start without config, start pcbnew in Cairo GAL
Currently, GAL is initialised to NONE (i.e. off). This causes
issues when Legacy canvas is broken (i.e. GTK3).

This changes the default to GAL Cairo, both in PCB_EDIT_FRAME
init, and in the config load.

Now, when the user starts with no config, they are prompted for
a choice: OpenGL or Cairo, and one of them will be set up, with
Cairo as fall back.

Users on platforms that still support legacy can go to it as normal
from the menu, but it will not be the default in any circumstance.

Fixes: lp:1809997
* https://bugs.launchpad.net/kicad/+bug/1809997
2019-01-04 15:22:34 -05:00
Seth Hillbrand 0fa374cce5 Fix missing Choice->Combobox change
Strangely this did not affect gcc and only showed an issue on Mac +
clang.
2019-01-04 10:25:52 -08:00
jean-pierre charras 56e0031e03 Fix incorrect onScroll handler on GAL mode.
If a Scroll event is skipped, a default handler is fired by wxWidgets.
This default default handler fires 3 wxEVT_SCROLLWIN_LINEUP or wxEVT_SCROLLWIN_LINEDOWN events.

This is not wanted now in eeschema (and pcbnew) because they add extra (unwanted) scrolling.

Fixes: lp:1810403
https://bugs.launchpad.net/kicad/+bug/1810403
2019-01-04 13:10:34 +01:00
jean-pierre charras db7dba96ad Fix a few Coverity warnings.
Mainly not initialized members, and replace not tested dynamic_cast by static_cast.
2019-01-04 09:49:21 +01:00
Seth Hillbrand 25f8b1ce72 pcbnew: Update multiple zone segments
Where we can get away with lower segment counts (localizing an anchor),
we keep the low-def 16 segment count.  Intermediate values and values
that are visible to the user are set to high definition.  Most are
simply hints to the inflation correction but where they show, the user
show see smooth lines.
2019-01-03 17:34:59 -08:00
Seth Hillbrand c92424898c pcbnew: Replace magic number segment counts
Where we set 32 segments per circle, the magic number is replaced by the
same value as the common define ARC_APPROX_SEGMENTS_COUNT_HIGH_DEF
2019-01-03 17:21:10 -08:00
Seth Hillbrand 847f6ab4b3 Spelling fix HIGHT->HIGH 2019-01-03 17:10:27 -08:00
Seth Hillbrand 064303e238 pcbnew: Move zone-knockout to default high def
Most rounding operations have been shifted to an absolute error
calculation and the ability to adjust zone segment counts has been
removed in 5.1.  The remaining elements that use fixed segment counts
are either 18 (DRC) or 32 (plotting).  This aligns the punchout segment
count with the higher (32) definition value
2019-01-03 17:09:56 -08:00
Seth Hillbrand 7d06651a10 Change top selection drop-down to combobox
wxChoice centers the selection on GTK.  So when switching from a
mid-list item to an item at the top, the list is always cut off for
choice lists located on the top toolbar.  Using a combobox provides a
drop-down that allows easier access to all elements in the box.

Fixes: lp:1808569
* https://bugs.launchpad.net/kicad/+bug/1808569
2019-01-03 14:48:28 -08:00
Seth Hillbrand 8de12094d8 Fix compile error for missing dtor in overload 2019-01-02 20:21:33 -08:00
Seth Hillbrand 9f8f938660 view: Initialize keyboard local var 2019-01-02 19:45:09 -08:00
Seth Hillbrand 37967eb685 eeschema: init pin table local var
Explicitly set modified to false when instantiating
2019-01-02 19:41:18 -08:00
Seth Hillbrand efbc50b7b8 prevent NULL dereference in dialog_text_properties 2019-01-02 19:40:29 -08:00
Seth Hillbrand 6662891f34 string update: Help->List hotkeys
The hotkey name "Help (this window)" does not describe what the hotkey
and associated action does.  It displays the current hotkey list, so the
action name should reflect that behavior
2019-01-02 15:44:13 -08:00
Seth Hillbrand b39061855e pcbnew: Translate scripting test window 2019-01-02 14:49:55 -08:00
Seth Hillbrand aeedb3543b pcbnew: Update strings
Moving pcbnew error strings that may be seen by the user to translated
strings.  Strings that denote unexpected cases are moved to debug logs
as they are essentially asserts that should never be shown.  The
exceptions are the messages shown when files are loaded.  All unknown
items should show an error here.
2019-01-02 14:43:55 -08:00
Seth Hillbrand 5c055f3f80 pcbnew: minor text fix 2019-01-02 12:28:09 -08:00
Seth Hillbrand daee58a0ab pcbnew: Do not show dynamic ratsnest after most mods
Marking the selection modified should not show the local ratsnest unless
we are currently dragging

Fixes: lp:1809921
* https://bugs.launchpad.net/kicad/+bug/1809921
2019-01-02 12:27:48 -08:00
Seth Hillbrand 583e0173b9 pcbnew: Fix ratsnest display
Checks for ratsnest enabled prior to calculating and displaying the
local/dynamic ratsnest.  Calls the ratsnest clear from selection clear

Notably, it appears that the tool actions do not chain transitions for
the same event.  So only a single action (first specified) will be
executed when an event fires unless the actions are executed by separate
tools.

Fixes: lp:1809752
* https://bugs.launchpad.net/kicad/+bug/1809752
2019-01-02 11:56:23 -08:00
John Beard 2f5dd6a43a Docs: Fix doxygen links
Doxygen is now at: http://www.doxygen.nl

Reported by: Brian Piccioni.
2019-01-02 09:53:29 -05:00
jean-pierre charras 4b7ef22ec4 Fix wildcard list when built on GTK 2019-01-01 17:04:40 +01:00