38df918993
Correct usage signature for PNS_NODE::Add()
...
When moving a unique_ptr, you are actually passing the object, not a
reference to the object. So we either std::move with the bare
unique_ptr parameter or we pass a reference. But we should never pass
an rvalue reference for this or we'll make a copy without holding the
tracking (because it was moved)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16839
(cherry picked from commit b2a25cb59e
2024-02-28 10:11:20 -08:00
45910bc7c1
Don't double-add pads to commit.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17087
2024-02-24 23:25:23 +00:00
dd6213051d
Pick DP coupled segment closest to start item and baseline.
2024-02-20 22:06:00 +03:00
82312a0fae
router: SplitAdjacentSegments() should check if the end segment we are about to split is in the same net that the head segment
...
Otherwise, the router might add bogus segments to the node. The root of the problem is somewhere in the logic that delivers aEndItem to ROUTER::Move() though - as the end item (in line placement mode at least) should always be an item within the same net as the head and not belonging to the current head...
2024-02-20 03:20:08 +00:00
8d76e4e171
Allow DP meanders to (mostly) fit on adjacent segments.
2024-02-20 03:20:08 +00:00
943c5fea59
Fix length calculations in DP meander placer.
2024-02-20 03:20:08 +00:00
1a65c0091f
Tweak default meander settings.
2024-02-20 03:20:08 +00:00
35e73d7dee
Restore green router collision color.
2024-02-20 03:20:08 +00:00
e9a881ed01
Reset placer when routing start fails to prevent crash on next usage.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/17008
2024-02-20 03:20:08 +00:00
ca148fb4d1
pns_debug_tool: Fix "save as" to save log file with new router state
2024-02-12 21:22:57 +01:00
3a6d74a3b3
Allow user to select location to save router event log
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16904
Note: no new strings added
"Unable to write '%s'." is from pagelayout_editor/files.cpp(182)
2024-02-11 13:43:55 +01:00
2b295f85f5
Fix corner radius for 0 amplitude meanders.
2024-02-10 08:36:50 +03:00
d4e89543de
Length-tuning fixes/improvements:
...
- Ensure correct amplitude values in tuning patterns.
- Support lower amplitudes in DP length tuning
- Ensure correct minimal inner radius in DP length tuning
2024-02-10 00:44:05 +03:00
453e185613
Increase unconstrained tuning length to 1km.
2024-02-09 19:25:46 +03:00
ecbe1df7c1
Update target length/skew to std::optional.
...
Also fixes a bug in the router where the target length would
get trashed if set to maxLongLongInt. (We'd add the default
tolerance to it sending it negative.)
2024-02-08 18:14:31 +00:00
876449b83d
Set DP skew meanders max length to INT32_MAX instead of 100 mm.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16860
2024-02-08 19:34:17 +03:00
e9fbb36538
SHAPE_LINE_CHAIN: Fix and simplify NextShape() + remove PrevShape()
...
NextShape() function was too complex (trying to go back and forwards).
We only used PrevShape() in one place, so removed that usage.
Added QA tests
2024-01-31 19:17:46 +03:00
b3f94ad46a
Cleanup before exit.
...
Possibly KICAD-5TE.
2024-01-25 15:30:25 +00:00
ed00cb3304
Support arcs in Break Track.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16712
2024-01-24 05:47:50 +03:00
ea7176d466
Don't attempt to update start item from a keyboard event.
2024-01-23 23:07:11 +00:00
a523c58530
Add a m_forceMarkObstaclesMode warning when violating DRC.
...
Also adds a modifier combination to commit anyway.
2024-01-02 17:02:50 +00:00
9db1dd5ec5
Refresh message panel when router mode changes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16497
2024-01-01 19:25:54 +00:00
81dbb12054
Don't enable the shove when forcing highlight mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16467
2024-01-01 11:48:30 -05:00
55429aea6b
pcbnew: Show current router mode in status bar
2023-12-31 02:54:59 +00:00
2e02ca9d14
Make length-tuning rollover layer-specific.
...
Also don't show target length in diaog when it hasn't been
set.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16379
2023-12-30 20:27:39 +00:00
69c95acc57
Handle arcs in TOPOLOGY::AssembleDiffPair().
2023-12-27 13:52:02 +00:00
e6632bb983
Rename PCB IO classes/files
2023-12-24 01:22:21 +00:00
d8b47d18d3
Initial rename of file plugin infrastructure components to IO
2023-12-24 01:22:21 +00:00
687389224e
Do a more complete search for a coupled net.
...
In particular, don't bail out if the starting seg is part
of a tuning pattern meander or a user-authored non-coupled
segment to get to a via or something).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16380
2023-12-23 23:43:12 +00:00
ee0fff97f9
Cleanup formatting and remove dead code.
2023-12-21 22:06:59 +00:00
c1eef79119
Fix off-by-one error in setting depth
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16421
2023-12-21 08:31:47 -05:00
d155870275
Sometimes use grid (instead of clearance) for slop radius.
...
This is particularly important both when very large grids
are in use, and when the router hasn't been initialized
with a net yet (ie: in hover mode) and the board clearance
is set to 0.
https://forum.kicad.info/t/new-track-start-position-problem-on-kicad-7-0-10-rc1/47006
2023-12-21 12:58:58 +00:00
76d1cc8150
Cleanup
2023-12-19 22:43:15 -05:00
1c895fe18c
Improve rendering of tuning status popup
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16304
Add dedicated UI rendering layers
Switch to screen-space rendering to avoid blurriness
Fix a bug in OpenGL GAL that causes layer
ordering to be broken when using Scale
Fix some issues with VIEW_GROUP layer ordering
2023-12-19 22:38:21 -05:00
24846d3f44
Repair earlier fix for VVIAs.
2023-12-19 16:48:01 +00:00
c7facfd4d4
remove unused variables
2023-12-18 18:54:47 +00:00
1c73d3d967
nullptr safety
2023-12-18 18:36:14 +00:00
e4baf877c8
performance efficiencies
2023-12-18 18:36:02 +00:00
3b36307425
Remove shadowed variable.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16363
2023-12-18 14:24:04 +00:00
c5ac2337e4
PNS mitering: construct arcs from start, end, angle.
...
Previously, arc endpoint and expected miter endpoint could differ,
causing very small loops later on.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16360
2023-12-17 05:47:07 +03:00
de070a1d62
Watch out for VVIAs.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16339
2023-12-12 15:45:13 +00:00
47ab6f8d03
Set default netclass for newly-added no-net PNS items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16144
2023-12-10 22:59:36 -05:00
931cec862e
Non-plated slots are effectively edges.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16267
2023-12-09 21:06:40 +00:00
e0a34efcb7
Use a more self-documenting API for router preview item flags.
...
Also fixes a bug where rule areas were drawn with solid fills.
2023-12-08 16:02:15 +00:00
2795fa9ca3
EE/PCB_Actions: convert to generic Finish
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/16079
2023-12-06 10:33:17 -05:00
a1b514bcba
Update message panel after switching layers.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16247
2023-12-03 17:07:08 +00:00
ff9d834e31
Don't use epsilon when calculating pushout force in dp placer.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16210
2023-12-03 16:58:41 +00:00
b13590f4c0
Use preview items instead of highlightNets & status popup
...
The router preview item can be specific to the part that is being
tuned, rather than the whole net. It's also less visually noisy as
it doesn't dim/undim the rest of the board.
Using kigfx preview items for the status keeps us from having a bunch
of focus issues with the status popup window.
2023-12-02 16:15:43 +00:00
2d9eee93e2
Fixes for length tuning patterns.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16198
2023-12-01 08:44:10 +03:00
7eb98a9863
Fixes for tuning patterns and router.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/16160
2023-11-28 20:55:39 +03:00
Seth Hillbrand
Jeff Young
Alex Shvartzkop
Tomasz Wlostowski
Roberto Fernandez Bautista
Ian McInerney
Jon Evans
Andrea Greco
Mike Williams