d836fbaaaa
Sim: Add VBIC model support
...
Update generate_sim_model_ngspice_data.bash a little, but it's still
outdated.
2022-11-28 04:45:36 +01:00
f2fb734e06
Sim QA: Add test for Numparam expressions inside .subckt
2022-11-27 06:32:17 +01:00
08d37d2795
Sim QA: Add Spice .subckt parsing tests
2022-11-26 10:24:11 +01:00
0b0c35c4dc
Adjust test result.
2022-11-23 21:37:50 +00:00
cd92088b7a
Fix disabled schematic page numbering unit tests.
2022-11-23 08:05:35 -05:00
d37015bada
Temporarily disable unit tests so builds pass.
2022-11-22 19:08:08 -05:00
6969362813
Sim Model Editor: Don't provide library-only models as builtins
2022-11-20 22:07:39 +01:00
e09e521162
Remove GUI calls from netlisting.
2022-11-18 15:29:16 +00:00
a61ac363c2
Excise the remaining occurrences of "Alias" for derived symbols.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12895
2022-11-16 18:37:40 +00:00
3dd2ae762d
Refactor step export to use our normal board processing routines
2022-11-12 21:27:10 -05:00
9d525e82f5
Fix qa tests so they don't assert on cleanup.
2022-11-11 20:31:39 +00:00
68de92313e
Properties: move to custom editor for distances; refactoring
...
Also fix display of angle values since EDA_ANGLE was introduced
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12290
2022-11-06 11:40:45 -05:00
4f634d7df7
Updated accelerating zoom controller to use default (non-accelerated)
...
zoom if changing direction.
Signed-off-by: Bevan Weiss <bevan.weiss@gmail.com>
2022-11-04 16:28:32 +00:00
07ef5d3343
Clarify QA message
2022-11-01 13:08:09 -07:00
6c752680d7
Sim QA: Add Potentiometers QA test
2022-10-27 06:42:43 +02:00
6a0db3e7e2
Fix Coverity warnings.
2022-10-26 14:39:44 -04:00
00c04e74ed
Sim QA: Test LTspice parameters and ako models of BJTs
2022-10-20 04:00:33 +02:00
27add591ec
Add Clipper2
...
Currently this lives behind the advanced config flag `UseClipper2`.
Enabling this flag will route all Clipper-based calls through the
Clipper2 library instead of the older Clipper. The changes should be
mostly transparent.
Of note, Clipper2 does not utilize the `STRICTLY_SIMPLE` flag because
clipper1 did not actually guarantee a strictly simple polygon.
Currently we ignore this flag but we may decide to run strictly-simple
operations through a second NULL union to simplify the results as much
as possible.
Additionally, the inflation options are slightly different. We cannot
choose the fallback miter. The fallback miter is always square. This
only affects the CHAMFER_ACUTE_CORNERS option in inflate, which does not
appear to be used.
Lastly, we currently utilize the 64-bit integer coordinates for
calculations. This appears to still be faster than 32-bit calculations
in Clipper1 on a modern x86 system. This may not be the case for older
systems, particularly 32-bit systems.
2022-10-19 16:25:45 -07:00
c4fc9c1b16
Sim QA: Add tests for AKO and LTspice diodes
2022-10-19 06:56:21 +02:00
9424b166d0
Add regression test case for 12609.
2022-10-09 23:31:26 +01:00
f369cc23a9
Handle arbitrary unit counts
2022-10-06 15:41:16 -07:00
6f2b2d7e19
Sim: Minor SIM_LIBRARY cleanup
2022-10-06 14:08:01 +02:00
40a279ae32
Hotglue the unit tests to work for now
...
The mocks never expected InitPgm to work and I accidentally fixed it for the kicad-cli
2022-10-05 17:12:32 -04:00
d67437a2aa
Move ratsnest exclusion processing to a post-pass.
...
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
4bbf942f15
Add test cases for box2 methods (Nearest/Farthest)Point and IntersectsCircle(Edge)
2022-09-27 22:40:55 +00:00
503385f52e
Don't use FindNamedPad for net-tie logic. It only reutrns the *first*
...
pad of a given number.
Also improves other DRC logic to tighten up the net-tie rules now that
we know which pads are allowed to short with which other pads.
Also removes the "Overlapping pads" DRC violation now that we know
whether or not overlapping pads in a net-tie footprint constitute a
short.
Fixes https://gitlab.com/kicad/code/kicad/issues/12506
2022-09-25 17:38:31 +01:00
fdb97a46c1
Don't copy items in for loops when not needed
2022-09-24 03:46:06 +01:00
fc813b79aa
Fix sim QA tests in countries using a comma as fp separator
2022-09-23 16:21:03 +02:00
e4865ce543
Excise wxString from simulation
2022-09-22 07:41:52 +02:00
0150655ed3
Fix missing DRC check with via
...
When the via is first and not second in our ordering, the hole-copper
clearance was not checked as the track did not have a hole.
We also calculated the NPTH-via clearance incorrectly in the inspector
2022-09-20 13:43:01 -07:00
e0f7c3b057
Properly handle non-connected labels in ERC
...
All labels need to be attached to a net that has at least 2 pins in
order for this to be a valid net. To check for the existing pins, we
need to interate over all subgraphs in the net, counting pins
2022-09-19 15:18:32 -07:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
66e8931405
Remove IU_PER_MM thats standalone
2022-09-16 21:09:27 -04:00
0f2411587e
Remove Millimeter2iu
2022-09-16 21:09:27 -04:00
61e11d6896
Strip out Mils2Iu
2022-09-16 21:09:27 -04:00
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
d199f92cd4
Fix QA tests in countries using a comma as fp separator (missing LOCALE_IO switch).
2022-09-15 10:37:01 +02:00
60374daa49
Fix ERC global label unit tests
...
Need to test all units in the subgraph as there are chances that the
subgraph might have more than one label, which needs to be consistently
handled
2022-09-12 13:16:45 -07:00
0e0d1a34f5
Sim: Spice grammar fixes
...
- Fix parsing .model lines with model names containingnon-alphanumeric
characters like - and _,
- Fix parsing libraries in which EOF is not preceded by a newline.
Fixes https://gitlab.com/kicad/code/kicad/issues/12394
2022-09-12 04:05:17 +02:00
cb6b2da55f
Sim QA: Display the original netlist even if circuit fails to parse
2022-09-10 02:45:48 +02:00
f2e3329617
Add ERC QA tests
2022-09-09 17:21:57 -07:00
b225e53135
Sim QA: Test raw model with fewer pins than its symbol
2022-09-02 16:42:15 +02:00
9188838e50
RIP EDA_RECT.
2022-08-31 23:57:24 +01:00
b4492e0bd2
More EDA_RECE yeetage.
2022-08-31 17:19:50 +01:00
2dc6300501
Move EDA_ITEM bounding boxes to BOX2I.
2022-08-31 10:16:55 +01:00
121fad63ab
Sim QA: Add Directives test
...
This test checks whether Spice directives placed in schematics as text
objects are properly included in the generated Spice netlist.
2022-08-31 09:41:35 +02:00
eda27a09d6
Add broken SHAPE_POLY_SET test
...
Remove null segments only removes a single segment rather than all,
potentially null segments in a row
2022-08-29 17:08:01 -07:00
385e5deaaa
Add Switches sim QA test
...
Tests voltage switches. Current switches will be tested as well once
they're fixed to work with .probe alli command in Ngspice.
2022-08-29 04:30:21 +02:00
Mikolaj Wielgus
Jeff Young
Wayne Stambaugh
Marek Roszko
Jon Evans
Bevan Weiss
Seth Hillbrand
Jonathan Haas
Ian McInerney
jean-pierre charras