PJM
abdd1906c2
Change 'Zoom to Fit' margins and add 'Zoom to Objects'
...
CHANGED: The margin used in 'Zoom to Fit' is now 2% instead of 10%.
ADDED: Added 'Zoom to Objects' to Eeschema which does not include
the page and border in the bbox calculations.
CHANGED: Removed pre-existing code that tweaked the center to account
for the scrollbars. It actually made the view off center. Removing it
results in perfectly centered zooms.
Fixes https://gitlab.com/kicad/code/kicad/issues/5145
2020-09-16 00:53:39 +00:00
Jeff Young
43ab963650
Don't expect footprint viewer frame to have a DRC engine.
2020-09-16 01:10:16 +01:00
Jeff Young
7e35658c28
Use schematic colours in symbol preview status panel.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4998
2020-09-16 00:58:36 +01:00
Jeff Young
cdbe2fd2d2
User terminology specific to Change Footprint/Symbol.
...
Also implements separate session settings for the reset checkboxes
for Change Footprint and Update Footprint.
Fixes https://gitlab.com/kicad/code/kicad/issues/5614
2020-09-16 00:15:26 +01:00
Roberto Fernandez Bautista
8b82852054
Hide header inside #ifdef statement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5645
2020-09-15 21:30:50 +00:00
Jeff Young
b4229d9a3e
Fix testcase crash when progressReporter was null.
...
(And it helps if the DRC tester you're trying to test is actually
in the make file.)
2020-09-15 22:25:12 +01:00
Ian McInerney
6a7266d589
Only update DRC progress reporter if the reporter exists
...
The DRC engine might not have a reporter when run headless
2020-09-15 21:18:58 +01:00
Ian McInerney
c399d489ba
Remove project condition from the symbol and footprint editors
2020-09-15 21:18:56 +01:00
Jeff Young
b6a8e165c3
Don't allow schematic/pcb DRC tests when in standalone mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5635
2020-09-15 21:14:11 +01:00
Jeff Young
e2e229da96
Finish exorcising the old DRC system.
...
This moves the various BOARD_ITEM calls to the new system, and make
the DRC_ENGINE long-lived so that it can field those queries.
2020-09-15 20:15:46 +01:00
Seth Hillbrand
67a7aa8ba4
Make snapping size grid-dependent
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5638
Fixes https://gitlab.com/kicad/code/kicad/issues/5588
2020-09-15 12:07:34 -07:00
Seth Hillbrand
08bf5f4b4e
ADDED: 45° snapping for rectangles aka Squares
...
The snap obeys only the Ctrl key and not the global preference setting
for drawsegments because rectangles are _always_ on H/V lines when drawn
Fixes https://gitlab.com/kicad/code/kicad/issues/5607
2020-09-15 11:22:26 -07:00
Seth Hillbrand
c5eba871e3
Fix formatting error
2020-09-15 10:55:31 -07:00
Roberto Fernandez Bautista
5467729611
Fix incorrect comparison in CADSTAR PCB Archive Importer
...
Also avoid use of magic numbers in case KiCad internal units ever change
2020-09-15 17:16:01 +00:00
Seth Hillbrand
514838dbbf
Version the lockfile
...
We are now versioning the configuration files, so we should apply the
same versioning to the lockfiles.
Fixes https://gitlab.com/kicad/code/kicad/issues/5637
2020-09-15 09:31:55 -07:00
Seth Hillbrand
aa7e021bfc
Remove translated null strings
...
Also improves translatability by separating clauses
2020-09-15 08:35:09 -07:00
Janvi
1b56e2e95d
ADDED: E-Series Resistor Calculator
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2155
2020-09-15 14:03:07 +00:00
Jeff Young
665212341d
Cleanup (consistent naming, 100-char line width, message precision).
2020-09-15 12:07:31 +01:00
jean-pierre charras
98339cd5eb
3d viewer: fix incorrect calculation of pad hole size of vertical shape.
...
Fixes #5627
https://gitlab.com/kicad/code/kicad/issues/5627
2020-09-15 10:17:31 +02:00
Jeff Young
514da2f886
Move DRC dialog to new DRC engine.
2020-09-14 22:39:36 +01:00
Seth Hillbrand
52d9a47d5b
Fix endless loop in drc
...
Need to allow looping to negative when decrementing
2020-09-14 12:25:25 -07:00
jean-pierre charras
4cda653dbd
dialog_drc: fix a minor issue when saving dialog drc options.
...
Fixes #5623
https://gitlab.com/kicad/code/kicad/issues/5623
2020-09-14 17:45:39 +02:00
jean-pierre charras
8e80a4d2ed
Common settings: better fix for common environment vars deletion.
...
The previous fix (d4461f6
) removed all vars before re-add them.
Clear all vars created issues with externally defined variables (the internal
initial value was lost)
Now only old, no longer existing, vars are deleted.
Fix also a potential issue related to non ASCII7 in last stored path.
2020-09-14 16:46:56 +02:00
jean-pierre charras
d4461f6c53
Common settings: fix: common environment vars: deleted vars were still in list.
...
When updating common environment variables list, the initial list was never
deleted. Therefore one could not remove an existing var.
The common environment variables list is now deleted before updating.
2020-09-14 14:44:54 +02:00
jean-pierre charras
ff0a728753
Fix a few I18N issues.
2020-09-14 10:02:07 +02:00
Jeff Young
748bee1bc7
Hook up netclasses and board minimums to new DRC engine.
...
Improves implicit rule reporting.
Makes some internal names more consistent.
Moves DRC_REPORT to the test framework.
Removes priority (which isn't supported in the grammar)
2020-09-13 17:08:24 +01:00
Jeff Young
d47d119d5f
Compile layer test into CONSTRAINT_WITH_CONDITIONS.
...
Also processes constraints in correct order for priority (reversed)
and removes multiple-expression-conditions for a single constraint
(which is not supported in the grammar).
2020-09-13 17:08:24 +01:00
Jeff Young
8420fcc33b
Cleanup.
2020-09-13 17:08:24 +01:00
Jeff Young
5d9301d394
Adjust isErrorLimitExceeded so it can be used for severity==IGNORE.
2020-09-13 17:08:24 +01:00
jean-pierre charras
9f85730987
Make SHAPE_POLY_SET::CacheTriangulation() behavior same as previously.
...
Previously, SHAPE_POLY_SET::CacheTriangulation() was able to handle polygons
with holes.
Due to recent changes, CacheTriangulation( true ) handle polygons with holes,
but CacheTriangulation( false ) did not handle polygons with holes, due to a
missing call to Fracture(), lost in latest changes.
This is now fixed.
Fixes #5606
https://gitlab.com/kicad/code/kicad/issues/5606
2020-09-13 17:55:59 +02:00
jean-pierre charras
9f44d72923
Zone filler: fix regression: zone with no nets are now clipped to board outlines.
...
Due to code changes, only zones belonging a net were considered, and
zones with no nets were not examined when removing islands.
Fixes #5608
https://gitlab.com/kicad/code/kicad/issues/5608
2020-09-13 10:38:16 +02:00
Simon Richter
aa24fe2880
Fix return type from ternary operator ( fixes #5554 )
2020-09-12 22:43:49 +00:00
Simon Richter
08828667ec
Add missing <algorithm>
2020-09-12 22:43:49 +00:00
Mark Roszko
aa34f2e764
Fix findopencascade for vcpkg
2020-09-12 22:41:17 +00:00
Jon Evans
2380c4384a
Fix alignment of label in dimension properties
2020-09-12 13:16:20 -04:00
Jon Evans
d7e9411049
Filter out footprints that are larger than the viewport in either direction
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2448
2020-09-12 13:16:10 -04:00
Jon Evans
a80190e206
Make sure auto-unit dimensions are updated on board load
2020-09-12 11:52:59 -04:00
Jon Evans
3940e20fcb
Expose extension offset and zero suppression settings
2020-09-12 11:52:59 -04:00
Seth Hillbrand
1703657fb5
Decrease default snap range
...
The snap range needs tuning to preference and monitor resolution. This
shifts the default range down for users until the customization bits are
implemented.
2020-09-12 08:34:21 -07:00
Jon Evans
e40287d327
Fix auto units to work when drawing new dimensions
2020-09-12 10:30:33 -04:00
Jon Evans
0347515cec
Support text expansion in dimensions
2020-09-12 10:23:19 -04:00
Seth Hillbrand
de12d40ee6
Remove OGLTest
...
We don't use this utility nor do we have plans to
2020-09-12 06:46:46 -07:00
Jon Evans
9d93f60fc4
Fix parsing old dimensions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5600
2020-09-12 08:25:54 -04:00
jean-pierre charras
1aa38b8f82
drc_rule.cpp: avoid crash with a incorrect (broken or too old?) drc_rule file.
...
The crash was due to a null pointer not tested.
2020-09-12 11:26:53 +02:00
jean-pierre charras
a98ea2fb2e
Fix a minor wxWidgets alert.
2020-09-12 10:52:12 +02:00
Jon Evans
30a428677f
Change rotation command to only impact dimension text
2020-09-11 21:12:36 -04:00
Jon Evans
0e9997d9ca
Add new dimension features to board design defaults
2020-09-11 21:12:36 -04:00
Jon Evans
76c4c959e6
Implement new dimension properties
...
- Automatic units mode (follow UI units)
- New text and number formatting options
- Automatic/manual text orientation control
- New text positioning options (inline and manual)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4280
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4497
2020-09-11 21:12:36 -04:00
Jon Evans
f1b7903a7d
WIP: Implement new dimension properties
2020-09-11 21:12:36 -04:00
Jon Evans
ae7877c6cb
Migrate dimension precision
2020-09-11 21:12:36 -04:00