When editing or viewing library symbols, the files are watched for
underlying changes. If any occur, the user is either prompted to reload
(if reloading would overwrite their current edits) or the file is
silently updated to the current version on disk.
This also sets a custom assertion handler to avoid unneeded crashes when
recieving invalid SAMBA packets and turns off assertions entirely when
running in release (non-debug) mode
Temporary and autosave files do not neccessarily have the correct
permissions set to replace existing project files. This updates the
permissions to match the existing values where possible
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13574
This library is meant to move non-EDA items (language extensions,
library extensions, etc.) into the lowest-level of our dependency chain.
This library should never depend on anyother non-thirdparty code in the
kicad codebase.
- remove --separate-files duplicate option
- change --units to --excellon-units (valid only for Excellon) and default to mm
- Gerber resolution: 5 -> 6 (default must be always the higher resolution)
Fixes#14454https://gitlab.com/kicad/code/kicad/issues/14454
The simulator has advanced considerably, and it is seeing lots of active
development, so make it a required part of KiCad. Additionally, the
build without the simulator has actually been broken for a while, so no
one clearly is building without ngspice right now.
- fix duplicate code and a few bugs (some are due to changes in code over the years)
- ADDED: option to export tracks and vias on external layers Exporting tracks is *very* time consuming,
and need a bit of optimization.
This adds Reset() method to KIFACE to reload global libs stored in
global static vars.
Also refactors some lib reload code in various frames to have
common MAIL_RELOAD_LIB handler.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12500
We block events when a modal window is active. But detecting when the
modal window is closed is harder on GTK than just counting modal closes
because the modal flag can sometimes be unset before the wxEVT_SHOW
event fires. Instead, we track the stack of modal windows opened and
close the window and subsequent windows when the object pointer matches
Fixes https://gitlab.com/kicad/code/kicad/issues/13372
For the sake of consistency across all dialogs and window that behave
like dialogs, remove the static line that separates the main part of
the dialog from the standard buttons. This only applies to windows
that have the standard button on the bottom of the frame.
This covers the 3D viewer, CvPcb, common, GerbView and KiCad dialogs.
We shouldn't include the kicad_build_info.h outside of the wrapper
build_info.h. Also adds an error directive to prevent re-introduction
of define dependencies
As of wxWidgets 3.2, the wxWidgets event handler runs code after the
the client event handler that depends on the menu still existing.
Because there are potentially many paths to call ReCreateMenuBar from
within a menu event handler, let's just wrap this action in a CallAfter
to make sure it happens after the wx handler call completes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13149
Previously, we included a newer version of BundleUtilities and
GetPrerequisites for macOS. However, the changes we needed have long been
included in CMake, and we weren't using our BundleUtilities in all the
places it was being used.
As part of supporting Apple Silicon, we've got to upgrade our embedded
Python to a version that comes with an Apple Silicon build. Python 3.9
suffices. This means we ignore python3.9 while fixing up bundles.
Apple requires all code to be signed on Apple Silicon. We've added signing
to the build. This has to be run after anything that adds to or modifies
the installed files. As of Cmake 3.14 (CMP0082), the install rules are run
in the order declared, so we are able to do this just by adding the
signing subdirectory last in the main CMakeLists.txt. By default, the
build will be signed "ad hoc", which does not require a developer to
create keys or get keys from Apple. We added some CMake variables to
control signing, KICAD_OSX_CODESIGN and KICAD_OSX_SIGNING_*.
In order to better support development, we've added some necessary cleanup
steps to KiCad that were performed externally in the release and nightly
build process, like removing any .pyc files and extra Python symlinks
erroneously introduced by fixup_bundle. We also adjusted "refix_rpaths" to
be more accurate. We should not need "wrangle_bundle" when building and
installing a local development copy of KiCad.
When running from the build directory, the schema must be present in the
build directory. This wasn't working on out-of-tree builds though, since
it was never copied there.
wxASSERT is removed in release mode (which most users run), so this will
not prevent future code from possibly using an invalid iterator if the
package version can't actually be found.
dropping files to Kicad manager :
*.kicad_pro, *.pro -> open project;
gerber and job files -> open in Gerbview editor;
Eagle and Cadstar files -> open project.
dropping file to schematic editor -> append schematic;
dropping library file to Symbol editor -> add library;
dropping board file to PCB editor -> append board;
dropping library or footprint file to Footprint editor -> add library or import footprint;
dropping ZIP file or gerber files to Gerbview editor -> open files;
dropping sheet file to Drawing Sheet editor -> open sheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11638
Pinned packages don't affect available update notification and will not
be updated with "Update All" button. Manual update is still possible but
will trigger a confirmation dialog.
Tested on msys2 which is the only place it would have been buggy
CMake seems to share the gdiplus linkage with the other dependencies automatically now
at() can throw when it doesn't find the proper reference. This catches
the errors and attempts to properly handle them assuming the user
initiated the removal. Warns the developer (wxLogDebug) when this is
not the case
Fixes https://gitlab.com/kicad/code/kicad/issues/12241
wxWidgets 3.1 has deprecated wxPATH_NORM_ALL when normalizing file
paths when calling wxFileName::Normalize(). This change keeps the
existing behavior except in places where our own internal
ExpandEnvVarSubstitutions() to expand environment variables.
This allows them to work in places like search boxes in standard file
dialogs. If wxWidgets doesn't find the standard IDs in our menus
then it won't enable them.
Also find a few more places where we are reaching into a new frame to
perform actions that need to have dialogs closed.
Running actions should also wait for the next cycle rather than being
immediately executed when we are calling into a new frame. This allow
for the cleanup actions onClose() to happen prior to the next action
starting
Fixes https://gitlab.com/kicad/code/kicad/issues/11891
Adds package update available state, package update operation and all
the corresponding logic around it to make updating package to another
version easy.
Thread pools are long-lasting executors that have close to zero overhead
when launching new jobs. This is advantageous over creating new threads
as we can use this for threading smalling jobs and smaller quanta. It
also avoids the heuristics needed to determine the optimal number of
threads to spawn
The json schema for packages implies that kicad min/max version
restriction takes major.minor.patch string but actual logic
only checks major and minor.
This fixes the logic to work with full major.minor.patch tuple.
Additionally the version max logic will substitute missing portions
with 999 for a reasonable default so that say 7.1 is still considered
as >= 7.1.5 when checking for max version.
Reported here
https://forum.kicad.info/t/updating-already-installed-plugins-using-content-manager/35532/5?u=qu1ck
When there are no pending actions, we should not show the user the
ability to apply/discard the pending actions. This uses wxUpdateUI in
the correct manner, limiting it to only the elements being updated and
using the event actions to ensure we don't have a cascade
Fixes https://gitlab.com/kicad/code/kicad/issues/10761
(cherry picked from commit 09a2d50e09)
Our menu bar code is interestingly complex. But we were throwing away newly made menu items to the void in the cases of constructed on the fly submenus
ADDED: with cmake KICAD_MACOSX_APP_BUNDLE option the user can disable
the macOS app bundle creation when compiling on macOS. This permit to
use/install KiCad like any other *nix platform (/usr/bin, /usr/share,
ecc.). By default, cmake build the app bundle.
wxSafeYield() is not "safe". Pending actions may include deletion of
the currently active class. This will cause crashes when exiting. If
needed for specific behaviors, we should use wxSafeYieldFor( flag ) with
the appropriate events specified rather than a general yield which can
cause more problems
(cherry picked from commit 9864337914)
The single string ctor of wxFileName treats the string as a path and file
name. If there is a dot in the last path name, it assumes that the last
path is actually a file name and extension.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10116
The flag is to protect against the frame going out of scope with the
references intact. This shouldn't be in CloseProject because we close
the project without removing the frame. Instead, placing it in OnExit
gets set correctly when closing the whole project manager
Fixes https://gitlab.com/kicad/code/kicad/issues/10018
An old size for the window could cut off the PCM button if it were
migrated, so to ensure the button is visible, just always use a fresh
window size on migration.
Fixes https://gitlab.com/kicad/code/kicad/issues/9649
- do not use KICAD_MANAGER_CONTROL::Execute() to run PCM: it is not an external app.
- add a workaround to avoid keeping incorrect focus on buttons in PANEL_KICAD_LAUNCHER.
Fixes#9780https://gitlab.com/kicad/code/kicad/issues/9780
This prevents any potential breakage of a project due to the file changes.
It is overly zealous because the project manager doesn't actually have any
knowledge of which files belong to the project.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9654
Processing a menu event for quitting results in the frame being
destroyed. This crashes the program when it tries to access the newly
freed frame to check for autosave data. We bind the closing flag into
the base program which will be the last item freed on exit to ensure we
can correctly check for data loss
Fixes https://gitlab.com/kicad/code/kicad/issues/8638
Seth Hillbrand
qu1ck
Marek Roszko
Jon Evans
jean-pierre charras
Mike Williams
Ian McInerney
Wayne Stambaugh
Salvador E. Tropea
David Holdeman
Ian McInerney
Alex
Simon Richter
aris-kimi
Jeff Young
Adam Wolf
Alexander Dewing
frutiemax
lulu731
canwail
Davide Gerhard
Mikolaj Wielgus